VESTEL 42PF6022 Operating Instructions Manual

Marka: VESTEL

Modeli: 42PF6022

Kategori: LCD TV'ler

Tip: Operating Instructions Manual

50227945

KULLANIM KILAVUZU

OPERATING INSTRUCTIONS

DANIŞMA MERKEZi:

444 4 123

www.vestel.com.tr

42PF6022 42” LED TV

Vestel Dayanıklı Tüketim Malları Pazarlama A.Ş.

Zorlu Plaza Avcılar 34310 İstanbul-TÜRKİYE

Tel: (0212) 456 22 00 Faks: (0212) 422 02 03

Cihazınızın Gümrük ve Ticaret Bakanlığı veya Bakanlıkça tespit ve ilan edilen

kullanım ömrü (cihazın fonksiyonlarını yerine getirebilmesi için

gerekli yedek parça bulundurma süresi) 10 yıldır.

English - 1 -

Safety Precautions

Please read these instructions fully

before installing or operating.

Preparation

Place the device on a solid even surface. For

ventilation, leave a free space of at least 10 cm

all around the set. To prevent any fault and unsafe

situations, do not place any objects on top of

the set. Use this device in moderate climates.

Operation temperature and operation humidity:

5ºC up to 45ºC, 85% rel. humidity max. (not blocking

ventilation openings).

Intended Use

This device is used to receive and display TV

programmmes.The different connection options

make an additional expansion of the reception and

display sources possible (various external devices).

This device is only suitable for the operation in dry

interiors. This appliance is intended solely for private

domestic use and may not be used for industrial and

commercial purposes. We exclude liability in principle,

if the device is not used as intended, or unauthorized

modications have been made. To operate your LCD

TV in extreme ambient conditions may cause the

damage of the device.

WARNING: Never let people (including

children) with physical, sensory or mental

abilities or lack of experience and / or knowledge

unsupervised use electrical device!

Children may not recognize dangers right!

The swallowing of batteries can be fatal. Keep

batteries always out of reach of small children.

If a battery is swallowed, immediately seek

medical attention. Keep the packaging lms out

of reach of children. Risk of suffocation.

Power source

• The TV should be operated only from a 220-240 V

AC, 50 Hz outlet.

• Warning: Do not leave your TV in standby or

operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least

10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• To prevent damage to the TV, do not place any

objects on top of the TV.

• Only use the TV in moderate climates.

Contents

Safety Precautions ................................................. 1

Environmental Information ..................................... 2

Accessories included .............................................. 3

TV - Features ......................................................... 3

Viewing the TV ....................................................... 3

TV Control buttons & Operation ............................. 3

Installing the Batteries to the Remote..................... 4

Connect Power & Antenna/Cable/Satellite ............. 4

Viewing remote control .......................................... 5

Switching On/Off ..................................................... 7

First Time Installation.............................................. 7

Media Playback via USB Input ............................... 9

Changing Image Size: Picture Formats .................. 9

Using the Channel List ........................................... 9

Menu Features and Functions .............................. 10

Menu Features and Functions ...............................11

Menu Features and Functions .............................. 12

Electronic Programme Guide (EPG) .................... 13

Recording a Programme ...................................... 13

Timeshift Recording ............................................. 14

Instant Recording ................................................. 14

Watching Recorded Programmes ....................... 14

Recording Conguration ....................................... 14

Teletext ................................................................. 15

Software Upgrade................................................. 15

Troubleshooting & Tips ......................................... 15

PC Typical Display Modes ................................... 16

Specications ..............................................................17

Supported File Formats for USB Mode ................ 17

English - 2 -

Power cord and plug

• The power cord plug should be easily accessible.

In case of storms and lightning, when going on

holiday, or when the TV is not used for a long period

of time disconnect the power cord from the mains

power socket.

• The mains plug is used to disconnect TV set from the

mains and therefore it must remain readily operable.

• Do not place the TV, furniture, etc. on the power

cord or pinch the cord.

• Handle the power cord by the plug, do not unplug

the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with

other cords.

• Power cords should be placed in such a way that

they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give

you an electric shock. When damaged it must be

replaced, this should only be done by qualied

personnel.

Moisture and Water

• Do not use this TV in a humid or damp place (avoid

bathrooms, the sink in the kitchen, and near the

washing machine).

• Do not expose this TV to rain or water, as this may

be dangerous.

• Do not place objects lled with liquids, such as

ower vases, on top of the TV. Avoid from dripping

or splashing.

• If any solid object or liquid falls into the cabinet,

unplug the TV and have it checked by qualied

personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended

for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not be

blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct

sunlight or other heat sources.

• The TV should not be placed near to

open ames and sources of intense

heat such as an electric heater.

• Ensure that no open ame sources,

such as lighted candles, are placed

on top of the TV.

Headphone Volume

• Excessive sound pressure from

earphones and headphones can cause

hearing loss, please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached

to the wall in accordance with the installation

instructions (if the option is available).

LCD Screen

• Occasionally, a few non-active pixels may appear

on the screen as a xed blue, green or red point.

Please note that this does not affect the performance

of your product.

• Take care not to scratch the screen with ngernails

or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a

soft, dry cloth.

Environmental Information

This television is designed to consume less energy

to save environment. You not only help to save the

environment but also you can save money by reducing

electricity bills thanks to the energy efciency feauture

of this TV. To reduce energy consumption, you should

take the following steps:

You can use Power Save Mode setting, located in the

Picture menu. If you set Power Save Mode as On, the

TV will switch to energy-saving mode and luminance

level of TV set will be decreased to optimum level.

Note that some picture settings will be unavailable

to be changed when the TV is in Power Save Mode.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Disconnect power when going away for longer time.

It is highly recommended to activate Power Save Mode

setting to reduce your annual power consumption. And

also it is recommended to disconnect the TV from the

mains plug to save energy more when you do not use.

Please helps us to save environment by following

these steps.

Repair Information

Please refer all servicing to qualied personnel. Only

qualied personnel must repair the TV. Please contact

your local dealer, where you have purchased this TV

for further information.

English - 3 -

Accessories included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Side AV Connection Cable

TV - Features

• Fully integrated digital/cable/ TV (DVB-T/C).

• HDMI connectors for digital video and audio.

• USB input.

• 10000 programmes.

• OSD menu system.

• Scart socket for external devices.

• Stereo sound system.

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7.

• Game Mode (optional).

• Picture off function.

• Pixellence.

Viewing the TV

TV Control buttons & Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

You can move the switch, upward or downward to

change the volume. If you want to change channels,

press the middle of the switch once (Position 3) and

then move upward or downward. If you press the

middle of the switch once more,source OSD will be

displayed. To select desired source, move the switch

upward or downward and release. If you press the

middle of the switch and hold about a few seconds,

the TV will switch to standby mode. Main menu OSD

cannot be displayed via the control button.

English - 4 -

Operation with the Remote Control

Press MENU button on your remote control to display

main menu screen. Use Left or Right button to select

a menu tab and press OK to enter. Use Left / Right

/ Up / Down to select or set an item. Press RETURN

or MENU button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press

button on your remote control consecutively

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume by

using the V ^ / v and CH ^ / v buttons on the remote.

Installing the Batteries to the

Remote

1. Lift the cover on the back of the remote upward

gently.

2. Install two AAA batteries. Make sure to match

the + and - ends of the batteries in the battery

compartment (observe the correct polarity.

3. Replace the cover.

Connect Power & Antenna/Cable/

Satellite

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature

before you connect the set to the mains. Plug the

power cable to the mains socket outlet.

SPDIF

VGA

English - 5 -

1. Standby / On

2. Channel list

3. Volume up-down

4. Menu on/off

5. OK / Conrm

6. Return / Back

7. No function

8. My button 1

9. My button 2

10. Coloured buttons (Red, Green, Yellow, Blue)

11. Mono-Stereo Dual I-II / Current language

12. Fast rewind (in media browser mode)

13. Pause /Timeshift Recording

14. Programme Recording

15. Play (in media browser mode)

16. Stop (in media browser mode)

17. Fast forward (in media browser mode)

18. Subtitle on-off / Subtitle (in media browser

mode)

19. Image size

20. Teletext - Mix

21. Media Browser

22. Electronic programme guide

23. Exit

24. Navigation buttons

25. Quick menu On-Off

26. Info / Reveal (in TXT mode)

27. Programme up/down

28. Mute

29. Previous programme / Now (in EPG mode)

30. Numeric buttons

31. AV / Source

(**) MY BUTTON 1: When on a desired source,

channel or link, press MY BUTTON 1 for ve

seconds, until the “MY BUTTON IS SET”

message is displayed on the screen. This

conrms that the selected MY BUTTON is now

associated with the selected function.

(***) MY BUTTON 2: This button’s main function

is to switch between DVB-T, DVB-C and DVB-S

broadcasts. However, if you press MY BUTTON

2 for ve seconds, you can set a function to it as

described in

My Button 1.

Note that if you perform rst time installation,

MY BUTTON 2 will return to its default function,

switching between DVB-T, DVB-C and DVB-S

broadcasts.

Viewing remote control

English - 6 -

Viewing the Connections

NOTE: When connecting a device via Side AV input, you must use the supplied connection cables to enable

connection. See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE AV CONNECTION

cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to

AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via

the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of

the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer

to the module instruction manual for details of the settings. You can use the VGA input for connecting a YPbPr device. To do

this, you need a YPbPr to PC cable (Not supplied).

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

Side Audio/Video

Connection Cable

(Supplied)

PC Audio Cable

(Not supplied)

HDMI

Connection

(back)

SPDIFF

Connection

(back)

SIDE AV

Side AV

Connection

(side)

AV Connection Cable

(supplied)

HEADPHONE

Headphone

Connection

(side)

USB

Connection

(side)

Connection

(side)

CAM

module

English - 7 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

Press “ ” button. Then the standby LED lights up.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on

the remote control.

To Switch the TV Off

Press the “ ” button on the remote control or press

the “ ” button or hold the control switch on the Tv

until shut down, so the TV will switch to standby mode.

(Depends model)

To power down the TV completely, unplug the power

cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED

can blink to indicate that features such as Standby Search, Over

Air Download or Timer is active. The LED can also blink when

you switch on the TV from standby mode.

First Time Installation

When turned on for the rst time, the “language

selection” menu appears. The message “Welcome

please select your language!” is displayed in all

language options listed alphabetically.

Press the “ ” or “ ” button to highlight the required

language, press OK button to select. “First Time

Installation” appears. Use “ ” or “ ” button to set

the required country, and press “ ” button to select

Search Type.

Use “ ” or “ ” to set the desired search type. Available

search types are Digital and analog, digital only and

analog only.

When set, press “ ” to select Teletext Language. Use

“ ” or “ ” to select the desired Teletext Language.

Next, select Scan Encrypted and set as Yes if you

want to scan coded stations.

Press OK button on the remote control to continue and

the following message will be displayed on the screen.

You can activate Store mode option by using “ ” or “

” button. If Store Mode is selected, Store mode option

will be available in other settings menu and your TV’s

features will be illustrated on the top of the screen. A

conrmation screen will be displayed after selecting

the Store Mode. Select YES to proceed.

If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK

button on the remote control to continue and the

following message will be displayed on the screen...

You must select a search type to search and store

broadcasts from the desired source.

English - 8 -

Aerial Installation

If you select AERIAL option from the Search Type

screen, the television will search for digital terrestrial

TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, Channel

List will be displayed on the screen. If you like the

sort channels, according to the LCN (*), please select

“Yes” and than press OK.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence.

Cable Installation

If you select CABLE option and press OK button on

the remote control to continue, the following message

will be displayed on the screen:

To continue please select YES and press OK. To

cancel operation, select NO and press OK.

You can select frequency ranges from this screen.

For highlighting lines you see, use “ ” or “ ” button.

You can enter the frequency range manually by using

the numeric buttons on the remote control.

Set Start and Stop Frequency as desired by using

numeric buttons on the remote control.

After this operation, you can set Search Step as 8000

KHz or 1000 KHz.

If you select 1000 KHz, the TV will perform search

process in a detailed way. Searching duration will

thus increase accordingly. When nished, press OK

button to start automatic search. The TV will search

and store available broadcasts.

Quick Menu (optional)

Quick Settings menu allows you to access some

options quickly. This menu includes Power Save

Mode, Picture Mode, Equalizer Settings, Favourites

and Sleep Timer options. Press Q.MENU button on

the remote control to view quick menu. See the

following chapters for the details of the listed features.

English - 9 -

Media Playback via USB Input

You can connect a USB hard disk drive or USB

memory stick to your TV by using the USB inputs of

the TV. This feature allows you to play les stored in

a USB drive. 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives are supported.

IMPORTANT! You should back up your les before

making any connections to the TV set in order to

avoid any possible data loss. Manufacturer will not

be responsible for any le damage or data loss. It is

possible that certain types of USB devices (e.g. MP3

Players) or USB hard disk drives/memory sticks may

not be compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks. Note: While

formatting a USB hard disk that has 1TB (Tera Byte)

or more le capacity, you can experience problems

with the formatting process.

Quickly plugging and unplugging USB devices, is a

very hazardous operation. Do not repeatedly quickly

plug and unplug the drive. This may cause physical

damage to the USB player and USB device itself. Do

not pull out USB module while playing a le.

Media Browser Menu

You can play photo, music, and movie les stored

on a USB disk by connecting it to your TV and using

the Media Browser screen. To do this, perform the

following: Connect a USB disk to one of the USB

inputs located on the side of the TV.

You can connect two USB devices to your TV. If both

USB devices include music, picture or video les, USB

selection OSD will be displayed on the screen. The

rst USB device connected to the TV will be named

as USB Drive1. Select a device by using “ ” or “ ”

button and press OK.

Press MENU button and select Media Browser tab by

using Left/Right and OK buttons. Main media browser

screen will be displayed. You can display the related

content by selecting the Video, Music or Picture tab.

Follow the button indications under each on screen

menu for media playback features.

You can set your Media Browser preferences by using

the Settings dialog.

Changing Image Size: Picture

Formats

Programmes can be watched in different picture

formats, depending on the transmission received. You

can change the aspect ratio (image size) of the TV for

viewing the picture in different zoom modes. Press “

” button repeatedly to change the image size. You

can shift the screen up or down by using “ ” or “

” buttons while in 14:9 Zoom, Cinema or Subtitle.

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options. Press MENU button to view main menu.

Select Channel List item by using Left or Right button.

Press OK to view menu contents. Select Edit Channel

List to manage all stored channels. Use Up or Down

and OK buttons to select Edit Channel List. Press

Up or Down button to select the channel that will be

processed. Press Left or Right button to select a

function on Channel List menu. Use P+/P- buttons to

move page up or down. Press MENU button to exit.

Sorting Channel List

You can select broadcasts to be listed in the channel

list. To display specic types of broadcast, you should

use Active channel list setting. Select Active channel

list from the Channel list menu by using “ ” or “ ”

button. Press OK button to continue. You can select

a network type option from the list by using “ ” or “

” and OK buttons.

English - 10 -

Menu Features and Functions

Picture Menu Contents

Mode

For your viewing requirements, you can set the related mode option. Picture mode can

be set to one of these options: Cinema,Game,Dynamic and Natural.

Contrast Sets the lightness and darkness values of the screen.

Brightness Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Power Save

Mode

To set Power Save Mode as Eco, Picture Off and Disabled. See the section,

“Environmental Information” in this manual for further information on Power Save Mode.

Backlight

(optional)

This setting controls the backlight level and it can be set to Auto, Maximum, Minimum

and Eco Mode. Backlight function will be inactive if Power Save Mode is set to On.

Backlight cannot be activated in VGA, Media Browser mode or while the picture mode

is set to Game.

Noise

Reduction

If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting

to reduce the noise amount. Noise Reduction can be set to one of these options: Low,

Medium, High or Off.

Pixellence

Demo Mode :

While Mode option is highlighted in picture menu, Pixellence demo mode will be

displayed bottom of the menu screen.

Pixellence Demo Mode function optimizes the TV’s video settings and helps to

acquire a better image quality. Pixellence Demo Mode thus includes contrast,

sharpness, colour enhancement and skin tone correction along with the skin tone

detection.

Press OK to start Pixellence Demo Mode for experiencing Pixellence quality.

Throughout the demo mode, the screen is splitted into two sections, one displaying

the Pixellence II active area; the other displaying the normal broadcast. Press OK

button to quit the demo mode.

Advanced Settings

Dynamic

Contrast

You can change contrast rate by using dynamic contrast function. Dynamic contrast can

be set to one of these options: Low, Medium, High or Off.

Colour Temp Sets the desired colour tone.

Picture Zoom Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.

HDMI True

Black

While watching from HDMI source, this feature will be visible in the Picture Settings

menu. You can use this feature to enhance blackness in the picture.

Film Mode

Films are recorded at a different number of frames per second to normal television

programmes. Turn this feature on when you are watching lms to see the fast motion

scenes clearly.

Skin Tone Adjust the desired skin tone.

Colour Shift Adjust the desired colour tone.

RGB Gain

Press OK button to edit RGB gain. You can congure the colour temperature values

using the RGB Gain feature.

Reset Resets the picture settings to factory default settings.

Autoposition

(in PC mode)

Automatically optimizes the display. Press OK to optimize.

H Position (in

PC mode)

This item shifts the image horizontally to right hand side or left hand side of the screen.

V Position (in

PC mode)

This item shifts the image vertically towards the top or bottom of the screen.

English - 11 -

Menu Features and Functions

Advanced Settings

Dot Clock (in PC

mode)

Dot Clock adjustments correct the interference that appear as vertical banding in

dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase (in PC mode)

Depending on the resolution and scan frequency that you input to the TV set, you

may see a hazy or noisy picture on the screen. In such a case you can use this

item to get a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the

Picture Settings while in PC mode.

Sound Menu Contents

Volume Adjusts volume level.

Equalizer:

In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat,

Classic and User. Press the MENU button to return to the previous menu.

Equalizer menu settings can be changed manually only when the Equalizer

Mode is in User.

Balance This setting is used for emphasizing left or right speaker balance.

Headphone Sets headphone volume.

Sound Mode

You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel

supports that mode.

AVL

Automatic Volume Limiting (AVL) function sets the sound to obtain xed output

level between programmes (For instance, volume level of advertisements tend

to be louder than programmes).

Dynamic Bass

(optional)

Enables or disables the Dynamic Bass.

Digital Out Sets digital out audio type.

Install and Retune Menu Contents

Automatic Channel

Scan (Retune)

Displays automatic tuning options.

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.

Manual Channel

Scan

This feature can be used for direct broadcast entry.

Network Channel

Scan

Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

First Time

Installation

Deletes all stored channels and settings, resets TV to factory settings and starts

rst time installation. You can follow the instructions in the Initial Installation

section for more information on this process.

English - 12 -

Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language Congures language settings.

Parental Congures parental settings.

Timers Sets timers for selected programmes.

Recording

Conguration

Displays recording conguration menu.

Date/Time Sets date and time.

Sources Enables or disables selected source options.

Other Settings: Displays other setting options of the TV set:

Menu Timeout Changes timeout duration for menu screens.

Scan Encrypted

When this setting is on, search process will locate the encrypted channels as well.

If it is set as Off, encrypted channels will not be located in automatic search or

manual search.

Blue Background Activates or deactivates blue background system when the signal is weak or absent.

Software Upgrade

To ensure that your TV always has the most update information, you can use

this setting. In order for the proper operation, please ensure that the TV is set to

standby mode.

Application Version Displays application version.

Hard of Hearing

If the broadcaster enables any special signal concerning the audio, you can set

this setting as On to receive such signals.

Audio Description

Audio description refers to an additional narration track for blind and visually

impaired viewers of visual media, including television and movies. You can use this

feature, only if the broadcaster supports that additional narration track.

Auto TV Off

You can set the timeout value of auto off feature.After the timeout value is reached

and the Tv is not operated for selected time , the TV will go off.

Store Mode

If you are displaying the TV in a store, you can activate this mode. While Store Mode is

enabled, some items in the TV menu may not be available to be set. Your TV’s features

will be illustrated on the top of the screen.

Standby Search

(optional)

If you change Standby Search to Off, this function will be unavailable. To use

Standby search please make sure that you select Standby Search as On. If the

Standby Search is set to On, when the TV is in standby mode, available broadcasts

will be searched. If the TV locates any new or missing broadcasts, a menu screen

will be displayed, asking you whether or not to execute these changes. Channel list

will be updated and changed after this process. Please activate Standby Search

setting in order to enable your TV for automatically updating the broadcast frequency

of the broadcaster, broadcast denition and similar changes.

Menu Features and Functions

English - 13 -

Electronic Programme Guide (EPG)

Some, but not all channels send information about the

current and next programmes. Press the “ ”button

to view the EPG menu.

Up/Down/Left/Right: Navigate EPG.

OK: Displays programme options.

INFO: Displays, in detail information on programme

selected.

GREEN: Switches to List Schedule EPG.

YELLOW: Switches to Timeline Schedule EPG.

BLUE: displays ltering options.

(RECORD): the TV will start to record the selected

progamme. You can press again to stop the recording.

IMPORTANT: To record a programme, you should first

connect a USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable recording feature.

Otherwise, recording feature will not be available.

Note: Switching to a different broadcast or source is not

available during the recording.

Programme Options

In EPG menu, press the OK button to enter the Event

Options menu.

Select Channel

In EPG menu, using this option, you can switch to the

selected channel.

Record / Delete Record Timer

After you have selected a programme in EPG menu,

press the OK button and Options screen will be

displayed. Select “Record” option and press the OK

button. After this operation, a recording becomes set

to the selected programme.

To cancel an already set recording, highlight that

programme and press the OK button and select the

option “Delete Rec. Timer”. The recording will be

cancelled.

Set Timer / Delete Timer

After you have selected a programme in EPG menu,

press the OK button and Options screen will be

displayed. Select “Set Timer on Event” option and

press OK button. You can set a timer for future

programmes. To cancel an already set timer, highlight

that programme and press the OK button. Then select

“Delete Timer” option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or more

individual events at the same time interval.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive, it is

recommended that you rst format the disk using your TV’s

“Format Disk” option.

To record a programme, you should rst connect a

USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable recording

feature.

For using recording function, you should connect a

USB disk or an external hard disk drive to the TV

and connected USB disk should have at least 1 GB

capacity and should have 2.0 speed compatibility.

If the connected USB device does not support 2.0

speed, an error message will be displayed.

Note: Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings on a

computer; however, these les will not be available to be

played on a computer. You can play the recordings only

via your TV.

Note: Lip Sync delay may occur during the timeshifting.

Radio record is not supported. The TV can record

programmes up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient, recording may fail and timeshifting feature

may not be available.

Recordings of HD programmes can occupy bigger

size on the USB disk depending on the broadcast’s

resolution. For this reason it is recommended to use

USB hard disk drives for recording HD programmes.

Do not plug out the USB/HDD during the recording.

This may harm the connected USB/HDD.

Multipartition support is available. Maximum two

different partitions are supported. If the disk have more

than two partitions, crash may occur. First partition of

the usb disk is used for PVR ready features. It also

must be formatted as primary partition to be used for

PVR ready features.

Some stream packets may not be recorded because

of signal problems, so sometimes video may freezes

during playback.

Record, Play, Pause, Display (for PlayListDialog) keys

could not be used when teletext is ON. If a recording

starts from timer when teletext is ON, teletext is

English - 14 -

automatically turned off. Also teletext usage is

disabled when there is ongoing recording or playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast

for switching to timeshifting mode. In timeshifting

mode, the programme is paused and simultaneously

recorded to the connected USB disk. Press (PLAY)

button again to watch the paused programme from

the stopped moment. You will see the timeshift gap

between the real and the timeshifted programme in

the info bar.

Instant Recording

Press (RECORD) button to start recording an

event instantly while watching a programme. You can

press (RECORD) button on the remote control

again to record the next event on the EPG. In this

case, OSD will display the programmed events for

recording. Press (STOP) button to cancel instant

recording. Switching to a different broadcast or source;

and viewing Media Browser are not available during

the recording.

Note: While recording a programme or during the timeshifting,

a warning message appears on the screen if your USB device

speed is not sufcent.

Watching Recorded Programmes

In the main menu, use “ ” or “ ” buttons to select

Media Browser. Highlight Recordings Library item

by using “ ” or “ ” button and press OK button to

enter. Recordings Library will then be displayed.

Select a recorded item from the list (if previously

recorded) by using “ ” / “ ” button. Press OK button

to view Play Options. Select an option by using “ ”

/ “ ” or OK buttons.

Available playback options:

• Play from start: Plays the recording from the

beginning.

• Resume: Recommences the recordings.

• Play from offset: Species a playing point.

Note: Viewing main menu and menu items will not be available

during the playback.

Press (STOP) button to stop a playback and return

to return to Recordings Library.

Slow Forward

If you press (PAUSE) button while watching

recorded programmes, slow forward feature will be

available. You can use button to slow forward.

Pressing button consecutively will change slow

forwarding speed.

Recordings Library

To view the list of recordings, select “Recordings

Library” and press the OK button. Recordings Library

will then be displayed with available recordings. All the

recordings are kept in a list in the recordings library.

(Resume): Recommences the recordings.

RED button (Delete) :Erases the selected recording.

GREEN button (Edit): Makes changes on the

selected recording.

BLUE button (Sort): Changes the order of the

recordings. You can select from a wide range of

sorting options.

OK button: Activates play options menu:

INFO (Details): Displays the short extended programmes

in detail.

Recording Conguration

Select Recording Conguration item in the Settings

menu to congure recording settings.

Format Disk: You can use Format Disk feature for

formatting the connected USB disk. IMPORTANT:

Note that ALL the data stored on the USB disk will

be lost and then the disk format will be converted to

FAT32 if you activate this feature. If your USB disk

malfunctions, you can try formatting the USB disk. In

most cases formatting the USB disk will restore normal

operation; however, ALL the data stored on the USB

disk will be lost in such a case.

Note: If “USB is too slow” message is displayed on the

screen while starting a recording, try restarting the recording.

If you still get the same error, it is possible that your USB

disk does not meet the speed requirements. Try connecting

another USB disk.

English - 15 -

Teletext

“ ” Teletext / Mix: Activates teletext mode when

pressed once. Press again to place the teletext screen

over the programme (mix). Pressing again will quit

the teletext mode.

“BACK” Index: Selects the teletext index page.

“i” Reveal: Shows hidden information (e.g. solutions

of games).

“OK” Hold: Holds a text page when convenient. Press

again to resume.

“ ”/“ ” Subcode Pages: Selects subcode pages if

available when the teletext is activated.

P+ / P- and numbers (0-9): Press to select a page.

Note: Most TV stations use code 100 for their index pages.

Your TV supports both FASTEXT and TOP text

systems. When these systems are available, the

pages are divided into groups or topics. When

FASTEXT system is available, sections in a teletext

page will become colour-coded and can be selected

by pressing the coloured buttons. Press a coloured

button that corresponds to with your needs. The

coloured writings will appear, showing you which

coloured buttons to use when TOP text transmission

is present. Pressing “ ” or “ ” commands will request

the next or previous page respec tively.

Digital Teletext (for UK only)

• Press the “ ” button. The digital teletext information

appears. Operate it with the coloured buttons, cursor

buttons and OK button.

The operation method may differ depending on the

contents of the digital teletext. Follow the instructions

displayed on digital teletext screen.

When the “ ” button is pressed again, the TV returns

to television broadcasting.

Software Upgrade

Your TV is capable of finding and updating new

software upgrades over broadcast channels. For

broadcast channels search, TV looks the available

channels stored in your settings. So before software

upgrade search, it is advised to auto search and

update all available channels.

1) Software upgrade search via user

interface

• It is possible manually to check if there is a new

software upgrade for your TV set.

• Simply navigate on your main menu. Choose

Settings and select Other Settings menu. In

Other Settings menu navigate on to the Software

Upgrade item and press OK button to open

Upgrade Options menu.

• In Upgrade Options menu select Scan for upgrade

and press OK button.

• If a new upgrade is found, it starts to download the

upgrade. A progress bar indicates the remaining

download progress. When download completes

with success a message is displayed for reboot to

activate new software. Press OK to continue with

the reboot operation.

2) Background search and upgrade mode

• While TV is connected to Internet, in background it

searches for critical software upgrades. If a critical

software upgrade is found it downloads the upgrade

silently. When download completes with success a

message is displayed for reboot operation to activate

new software. Press OK to continue with the reboot

operation.

3) 3 AM search and upgrade mode

• If Automatic scanning in Upgrade Options menu

is enabled, TV wakes up at 03:00 and searches

broadcast channels for new software upgrade. If new

software is found and downloaded successfully, with

next power up TV opens with new software version.

Note on reboot operation: Reboot is the last step in software

upgrade operation if download of new software is nished

successfully. During reboot TV makes nal initialization. In

reboot sequence panel power is closed and front led indicates

the activity with blinking. Around 5 minutes later TV restarts

with new software activated.

• If your TV fails to restart in 10 minutes, unplug power

for 10 minutes and re-plug again. TV should open

with new software safely. If you still can not get

TV working, please kindly repeat unplug and plug

sequence a few times more. If your set still can not

operate, please call the service personnel to x the

problem for you.

Caution: While led is blinking during reboot do not unplug

your TV’s power. Doing this may cause your TV not to

re-open again and can only be xed by service personnel.

Troubleshooting & Tips

Image persistence - ghosting

Please note that ghosting may occur while displaying

a persistent image (still or paused image). LCD TV’s

image persistence may disappear after a short time.

Try turning off the TV for a while. To avoid this, do not

leave the screen in still picture mode for extended

periods.

No power

If your TV has no power, please check the power cord

plug is connect to the mains power socket.

Poor picture

1. Have you selected the correct TV system?

2. Is your TV or house aerial located too close to a

non-earthed audio equipment or neon lights, etc.?

English - 16 -

3. Mountains or high buildings can cause double

pictures or ghost images. Sometimes you can

improve the picture quality by changing the

direction of the aerial. Is the picture or teletext

unrecognisable?

4. Check if you have entered the correct frequency.

5. Please retune the channels.

6. The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

1. No Picture means that your TV is not receiving a

transmission. Have you selected the correct button

on the remote control? Try once more. Also make

sure the correct input source has been selected.

2. Is the aerial connected properly?

3. Are the plugs connected tightly to the aerial socket?

4. Is the aerial cable damaged?

5. Are suitable plugs used to connect the aerial?

6. If you are in doubt, consult your dealer.

No sound

1. Has the TV been set to mute? To cancel mute,

press the “ ” button, or increase the volume level.

2. Sound is coming from only one speaker. Is the

balance set to one extreme? See Sound Menu

section.

Remote control - does not operate

Your TV no longer responds to the remote control.

The batteries may be exhausted, if so you can still

use the control buttons on the TV. (* Is only possible

if they are not blocked by parental control.)

Input sources - can not be selected

1. If you cannot select an input source, it is possible

that no device is connected.

2. Check the AV cables and connections if you have

tried to connect a device.

Recording Unavailable

To record a programme, you should rst connect

a USB disk to your TV while the TV is switched

off. You should then switch on the TV to enable

recording feature. Otherwise, recording feature will

not be available. If you cannot perform recording, try

switching off the TV and then re-inserting the USB

device while the TV is switched off.

USB Is too Slow

If “USB is too slow” message is displayed on the

screen while starting a recording, try restarting

the recording. If you still get the same error, it is

possible that your USB disk does not meet the speed

requirements. Try connecting another USB disk.

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

PC Typical Display Modes

The following table is an illustration of some of the

typical video display modes. Your TV may not support

all resolutions. Your TV supports up to 1920x1080.

Index Resolution Frequency

1 640x350p 60 Hz

2 640x400p 60 Hz

3 1024x768 60 Hz

4 1280x768 60 Hz

5 1360x768 60 Hz

6 720x400 60 Hz

7 800x600 56 Hz

8 800x600 60 Hz

9 1024x768 60 Hz

10 1024x768 66 Hz

11 1280x768 60 Hz

12 1360x768 60 Hz

13 1280x1024 60 Hz

14 1280x960 60 Hz

15 1280x1024 60 Hz

16 1400x1050 60 Hz

17 1920x1080 60 Hz

18 1600x1200 60 Hz

English - 17 -

Specications

TV BROADCASTING

PAL/SECAM B/G D/K K’ I/I’ L/L’

DIGITAL RECEPTION

DVB-T MPEG2

DVB-T MPEG4 HD

DVB-T MHEG-5 Engine (for UK only)

DVB-C MPEG2

DVB-C MPEG4 HD

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

NUMBER OF PRESET CHANNELS

10000

CHANNEL INDICATOR

On Screen Display

Supported File Formats for USB Mode

Media

File

Extension

Format

Remarks

Video Audio (Maximum resolution/Bit rate etc.)

Movie

.mpg .mpeg MPEG1,2 MPEG Layer 1/2/3

MAX 1920x1080 @ 30P 20Mbit/sec

.dat MPEG1,2

MPEG2

.vob MPEG2

.mkv H.264, MPEG1,2,4 EAC3/ AC3

.mp4

MPEG4

Xvid 1.00,

Xvid 1.01, Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2

H.264

PCM/MP3

.avi

MPEG2, MPEG4

Xvid 1.00,

Xvid 1.01, Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2

H.264

PCM

Music

.mp3 -

MPEG 1 Layer 1 /

2 (MP3)

32Kbps ~ 320Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

Photo

.jpg .jpeg Baseline JPEG - max WxH = 15360x8640 4147200bytes

. Progressive JPEG - max WxH = 9600x6400 3840000bytes

.bmp - - max WxH = 9600x6400 3840000bytes

Subtitle

.sub .srt - - -

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220-240V AC, 50 Hz.

AUDIO

German + Nicam Stereo

AUDIO OUTPUT POWER (W) (10% THD)

2x8

PANEL

16:9 display, 42” Screen Size

POWER CONSUMPTION (W)

160 W (max)

DIMENSIONS (mm)

DxLxH (With foot):220 x 990 x 648

Weight (Kg):15,75

DxLxH (Without foot): 39 x 990 x 608

Weight (Kg):14,25

Türkçe - 18 -

Güvenlik Önlemleri

Kurulum veya çalıştırma öncesinde bu

talimatları tam olarak okuyunuz.

Hazırlık

Cihazı sert ve dengeli bir yüzeye koyunuz.

Havalandırma için alet etrafında en az 10 cm boş

alan bırakınız. Bir hata oluşumunu önlemek ve güvenli

olmayan bir durumdan korunmak için cihazın üzerine

lütfen herhangi bir nesne koymayınız. Cihazı ılıman

iklimlerde kullanınız. Çalıştırma sıcaklığı ve nemi:

5ºC ila 45ºC, maks. %85 bağıl nem (havalandırma

açıklıklarını tıkamayacak).

Kullanım Amacı

Bu cihaz TV programlarını almak ve görüntülemek

için kullanılır.Farklı bağlantı seçenekleri, olası

kaynakların alımı ve görüntülenmesi için ilave

genişletme sunar (çeşitli harici cihazlar). Bu cihaz

sadece kuru mekanlarda çalışmaya uygundur. Bu

cihaz yalnızca özel ev kullanımı için üretilmiştir ve

sanayi ve ticari amaçlarla kullanılamaz. Eğer cihaz

kullanım amacının dışında kullanılırsa veya üzerinde

izinsiz değişiklikler yapılırsa prensip olarak cihazdaki

sorumluluğumuz kalkar. LCD TV’nizi aşırı ortam

koşullarında çalıştırmak cihaza zarar verebilir.

UYARI: Fiziksel, algısal veya zihinsel olarak

yetersiz veya deneyimsiz kişiler (çocuklar

dahil) güvenliklerinden sorumlu olan bir

kişinin gözetimi olmadan elektrikli bu cihazı

kullanmamalıdır!

Çocuklar tehlikelerin farkında olmayabilir!

Pillerin yutulması ölümcül olabilir. Pilleri küçük

çocukların erişemeyeceği yerlerde saklayın.

Piller yutulursa, derhal tıbbi yardım alınız.

Ambalaj malzemelerini çocukların erişebileceği

yerlerden uzak tutunuz. Boğulma tehlikesi.

Güç kaynağı

• TV yalnızca 220-240 V AC 50 Hz çıkışla

çalıştırılmalıdır.

• Uyarı: Evden ayrılırken TV’nizi bekleme

konumunda veya çalışır halde bırakmayınız.

TV’nin Konumlandırılması

• Havalandırma için TV etrafında en az 10cm boş

alan bırakınız.

• engellemeyiniz.

• TV’yi eğimli veya dengesiz yüzeylere koymayınız;

TV devrilebilir.

• TV’nin zarar görmesini engellemek için, TV üzerine

herhangi bir nesne koymayınız.

• Yalnızca ılıman iklimlerde kullanınız.

İçindekiler

Güvenlik Önlemleri ............................................... 18

Çevresel Bilgi ....................................................... 19

Dahil olan aksesuarlar .......................................... 20

TV - Özellikler ...................................................... 20

TV’nin Görüntülenmesi ......................................... 20

TV Kontrol tuşları ve Çalıştırma............................ 20

Uzaktan kumandaya pil yerleştirilmesi ................. 21

Güç ve Anten/Kablo/Uydu Bağlanması ................ 21

Uzaktan kumandanın görüntülenmesi ................. 22

Açma/Kapatma ..................................................... 24

İlk Kurulum............................................................ 24

USB Girişi yoluyla Medya Oynatma ..................... 26

Görüntü Boyutunu Değiştirme: Resim Formatları 26

Kanal Listesinin Kullanılması ................................ 26

Menü Özellikleri ve İşlevleri .................................. 27

Menü Özellikleri ve İşlevleri .................................. 28

Menü Özellikleri ve İşlevleri .................................. 29

Elektronik Program Rehberi (EPG) (Electronic

Programme Guide) ............................................... 30

Program Kaydetme............................................... 30

Zaman Kaydırmalı Kayıt ...................................... 31

Anında Kayıt ......................................................... 31

Kayıtlı Programları İzleme ................................... 31

Kayıt Yapılandırma ............................................... 31

Teleteks ................................................................ 32

Yazılım Yükseltme ................................................ 32

Sorun Giderme ve İpuçları.................................... 32

PC Tipik Ekran Modları ........................................ 33

Özellikler ....................................................................34

USB Modunda Desteklenen Dosya Formatları..... 34

Türkçe - 19 -

Güç kablosu ve ş

• Güç kablosu kolaylıkla erişilebilir olmalıdır. Fırtına

veya yıldırım düşmesi durumunda, tatile giderken

veya TV uzun bir sure boyunca kullanılmayacaksa,

güç kablosunu prizden çekin.

• Elektrik kablosu TV setinin elektrik şebekesi ile olan

bağlantısının kesilmesi için kullanılır, dolayısı ile hali

hazırda işleyebilir kalacaktır.

• bükmeyiniz.

• Güç kablosunu şten tutunuz, kablodan çekerek

prizden çıkarmayınız.

• Güç kablosuna/şe asla ıslak ellerle dokunmayınız;

bunu yapmak kısa devreye veya elektrik çarpmasına

neden olabilir.

• Güç kablosunu asla düğümlemeyiniz veya başka

kablolarla birlikte bağlamayınız.

• Güç kabloları, üzerlerine basılmayacak veya

üzerinden geçilmeyecek şekilde yerleştirilmelidir.

• Hasar görmüş bir güç kablosu/fiş yangına

veya elektrik çarpmasına neden olabilir. Hasar

gördüğünde, yalnızca yetkili personel tarafından

değiştirilmelidir.

Nem ve Su

• kullanmayınız (banyoda, mutfak lavabosu ve

bulaşık makinesi yakınlarında kullanmaktan

kaçınınız).

• bırakmayınız, tehlikeli olabilir.

• koymayınız. Su damlatmaktan veya sıçratmaktan

kaçınınız.

• Eğer kabinin üzerine herhangi sert bir nesne

düşecek veya sıvı dökülecek olursa, TV’nin şini

çekiniz ve tekrar çalıştırmadan önce vasıı eleman

tarafından kontrol ettiriniz.

Havalandırma

• TV seti üzerindeki yuva ve delikler havalandırma ve

güvenli çalışma için yapılmışlardır.

• Aşırı ısınmadan kaçınmak için bu delikler hiçbir

şekilde engellenmemeli veya kapatılmamalıdır.

Isı Kaynakları ve Ateş

• bırakmayınız.

• TV, çıplak alevlerin veya elektrikli

ısıtıcı gibi yoğun ısı kaynaklarının

yakınına yerleştirilmemelidir.

• TV’nin üzerine, yanan mumlar

gibi hiçbir çıplak ateş kaynağının

koyulmadığından emin olunuz.

Kulaklık Sesi

• Kulaklıklardan gelen aşırı ses basıncı

duyma kaybına yol açabilir; lütfen

dikkatli olunuz.

Duvara Montaj (Opsiyonel)

• Yaralanmaları önlemek için, kurulum talimatlarına

uygun olarak sağlam şekilde duvara tutturulmalıdır

(bu seçenek mevcutsa).

LCD Ekran

• Ara sıra ekranda sabit noktalar halinde mavi, yeşil

veya kırmızı bir kaç ölü piksel belirebilir. Lütfen

bunun ürününüzün çalışmasını etkilemediğini göz

önünde bulundurunuz.

• Ekranı tırnaklarınızla veya sert cisimlerle çizmemeye

özen gösteriniz.

Temizlik

• Temizlemeden önce TV’nin şini prizden çekiniz.

• kullanmayınız. Yalnızca yumuşak ve kuru bir kumaş

kullanınız.

Çevresel Bilgi

Bu televizyon çevreyi korumak için daha az enerji

tüketecek şekilde tasarlanmıştır. Bu TV’nin enerji

tasarrufu özelliği sayesinde sadece çevrenin

korunmasına yardımcı olmakla kalmaz, aynı zamanda

elektrik faturanızı düşürerek para tasarrufu da

yapabilirsiniz. Enerji tüketimini azaltmak için aşağıdaki

adımları gerçekleştirmelisiniz:

Resim menüsünde bulunan Güç Tasarrufu Modunu

kullanabilirsiniz. Güç Tasarrufu Modunu açarsanız, TV

enerji tasarrufu moduna geçecek ve TV’nin parlaklığı

optimum seviyeye indirilecektir. TV Güç Tasarrufu

modunda olduğunda bazı görüntü ayarlarının

değiştirilemeyeceğine dikkat ediniz.

Kullanılmadığında TV’yi kapatınız ve şini prizden

çekiniz. Bu da enerji tüketimini azaltacaktır.

Uzun süre uzakta kalacaksanız prizden çıkarınız.

Yıllık enerji tüketiminizi azaltmak için Güç Tasarrufu

Modunu etkinleştirmeniz önemle tavsiye edilir.

Kullanmadığınızda enerji tasarrufu sağlamak için

TV’nin şinin prizden çekilmesi de tavsiye edilir.

Bu adımları izleyerek çevreyi korumamıza yardımcı

olunuz.

Onarım Bilgileri

Lütfen bütün servis işlemleri için yetkili personele

danışınız. TV’yi sadece kaliye personel onarmalıdır.

Daha fazla bilgi için bu TV’yi satın aldığınız yerel

bayinize başvurunuz.

Sayfa yükleniyor...

VESTEL 42PF6022 Operating Instructions Manual

Marka: VESTEL

Modeli: 42PF6022

Kategori: LCD TV'ler

Tip: Operating Instructions Manual

PDF''yi indir

rapor

diğer dillerde

English: VESTEL 42PF6022

VESTEL 42PF6022 Operating Instructions Manual

VESTEL 42PF6022 Operating Instructions Manual

diğer dillerde

İlgili makaleler