Samsung HW-J250 Kullanım kılavuzu

Wireless Audio - Soundbar

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

User manual

HW-J250

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 1 2016/11/23 9:40:35

32

FEATURES

TV SoundConnect

TV SoundConnect lets you listen to audio from your TV on your Soundbar via a Bluetooth connection and lets you

control the sound.

Special Sound Effects

You can select different Sound Effects - Voice (Red ) / Sports (Green ) / 3D Sound Plus (White ) /

STANDARD (Original Sound) - depending on the type of content you want to enjoy.

Multi-function Remote Control

You can use the supplied remote control to control various operations with the simple press of a button.

USB Host Support

You can connect and play music files from external USB storage devices such as MP3 players, USB flash memory,

etc. using the Soundbar's USB HOST function.

Bluetooth Function

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!

Using the Samsung Audio Remote App

To control the product with your Smart Device via the Samsung Audio Remote app, download the Samsung

Audio Remote App by accessing the app through the Google Play store.

LICENSES

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 2 2016/11/23 9:40:35

32

ENG

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO

NOT OPEN

This symbol indicates “dangerous voltage” inside

the product that presents a risk of electric shock or

personal injury.

This symbol indicates important instructions

accompanying the product.

WARNING : To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug

shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects ﬁlled with liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug

must be easily and readily accessible at all times.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 3 2016/11/23 9:40:35

54

SAFETY INFORMATION

During thunderstorms, disconnect the AC plug from the

wall outlet. Voltage peaks due to lightning could damage

the unit.

Protect the product from moisture (i.e. vases), and

excess heat (e.g. a fireplace) or equipment creating

strong magnetic or electric fields. Unplug the power

cable from the AC wall socket if the unit malfunctions.

Your product is not intended for industrial use. It is for

personal use only. Condensation may occur if your

product has been stored in cold temperatures. If

transporting the unit during the winter, wait approximately

2 hours until the unit has reached room temperature

before using.

Do not expose the unit to direct sunlight or other heat

sources. This could lead to overheating and cause the

unit to malfunction.

The battery used with this product contains chemicals

that are harmful to the environment. Do not dispose of

the battery in the general household trash. Do not

expose the battery to excess heat, direct sunlight, or fire.

Do not short circuit, disassemble, or overheat the battery.

Danger of explosion if the battery is replaced incorrectly.

Replace only with the same or equivalent type.

PRECAUTIONS

Ensure that the AC power supply in your house complies with the power requirements listed on the identification

sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough

space around it for ventilation (

7~10 cm

). Make sure the ventilation slots are not covered. Do not place the unit on

amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the

unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of

time.

99.1mm 99.1mm

68.6

mm

99.1mm

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 4 2016/11/23 9:40:37

54

ENG

CONTENTS

2 FEATURES

2 Licenses

3 SAFETY INFORMATION

3 Safety Warnings

4 Precautions

6 GETTING STARTED

6 Before reading the User’s Manual

6 What’s Included

7 DESCRIPTIONS

7 Top/Front Panel

8 Rear Panel

9 REMOTE CONTROL

9 Remote Control Buttons and Functions

11 CONNECTIONS

11 Installing the Wall Mount

12 Detaching the Wall Mount

13 Installing the bracket without referring to

the Wall-mount Installation Guide

14 Connecting an External Device using Audio

(analog) cable or Optical (digital) cable

15 FUNCTIONS

15 Input Mode

16 Bluetooth

18 Using the Samsung Audio Remote APP

19 TV SoundConnect

20 USB

21 Software update

22 TROUBLESHOOTING

23 APPENDIX

23 Specifications

CONTENTS

●

Figures and illustrations in this User Manual are

provided for reference only and may differ from

actual product appearance.

●

An administration fee may be charged if either

(a) An engineer is called out at your request and

there is no defect with the product (i.e. where

the user manual has not been read).

(b) You bring the unit to a repair centre and there

is no defect with the product (i.e. where the

user manual has not been read).

●

You will be informed of the administration fee

amount before a technician visits.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 5 2016/11/23 9:40:37

76

GETTING STARTED

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

▶ Icons used in this manual

Icon Term Definition

Caution

Indicates a situation where a function does not operate or settings may be canceled.

Note

Indicates tips or instructions on the page that help you operate a function.

▶ Safety Instructions and Troubleshooting

1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 22)

▶ Copyright

Samsung Electronics Co.,Ltd.

WHAT’S INCLUDED

Check for the supplied accessories shown below.

(Wall Mount L: 1EA)

(Wall Mount R: 1EA)

(Holder-screw2: 2EA)

(Holder-screw1: 2EA)

Remote Control / Lithium

Battery (3V : CR2032)

User Manual

Bracket-Wall Mount

Holder-screw

Wall Mount Guide

Power Cord DC Adapter Optical Cable

USB Cable

●

The appearance of the accessories may differ slightly from the illustrations above.

●

Use the dedicated USB cable to connect external USB devices to the unit.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 6 2016/11/23 9:40:39

76

ENG

DESCRIPTIONS

(Power) Button

Turns the power on and off.

STANDBY indicator (Red )

Bluetooth POWER ON indicator

(Green )

VOL -/+

Controls the volume level.

LED

Displays the current mode.

Display Color Input mode

White

D.IN (Optical Digital input)

mode

Red

AUX input mode

Green

TV SoundConnect

White

BLUETOOTH mode

White

USB mode

Red

Voice Mode

Green

Sports Mode

White

3D Sound Plus Mode

(Source) Button

Selects the D.IN, AUX, TV, BT, USB

input.

While the unit is powered on,

pressing the ( ) button for more

than 3 seconds sets the button to

act as the MUTE button. To cancel

MUTE button setup, press the

( ) button for more than 3

seconds again.

DESCRIPTIONS

TOP/FRONT PANEL

●

When you turn on this unit, there will be a 4 to 5 seconds delay before it produces sound.

●

If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup

menu of your TV. Refer to the owner's manual supplied with your TV.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 7 2016/11/23 9:40:40

98

DESCRIPTIONS

REAR PANEL

●

When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug.

Do not pull the cable.

●

Do not connect this unit or other components to an AC outlet until all connections between components

are complete.

(USB Port)

Connect USB devices such

as MP3 players here to play

files on the devices.

OPTICAL IN

Connect to the digital (optical) output

of an external device.

AUX IN

Connect to the Analog output of

an external device.

DC 14V (Power Supply In)

Connect the DC power adaptor to

the power supply jack, and then

connect the AC power adaptor plug

to a wall outlet.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 8 2016/11/23 9:40:40

98

ENG

REMOTE CONTROL

D.IN

AUX

▶ Installing the Batteries in the Remote Control

1. Use a suitable coin to turn

the remote control's battery

cover counter clockwise to

remove it as shown in the

figure above.

2. Insert a 3V lithium battery. Keep the

positive (+) pole facing up when

inserting the battery. Put the battery

cover on and align the '●' marks

side by side as shown in the figure

above.

3. Use a suitable coin to turn the

remote control battery cover

clockwise as far as it will go to

fix it in place.

REMOTE CONTROL

REMOTE CONTROL BUTTONS AND FUNCTIONS

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the

Bluetooth Power On function on and off.

See pages 17 and 19 for details.

POWER

Turns the Soundbar on and off.

VOLUME

Adjusts the volume level of the unit.

If you set the volume to Max or Min, the

,

, LEDs turn on.

Bluetooth

Press the Bluetooth button to select Bluetooth mode.

D.IN

Press the D.IN button to select Digital In mode.

Skip Back

If there is more than one file on the device you are playing, and you press

the [ button, the previous file is selected.

Play/Pause

Press the +# button to pause a file temporarily.

Press the +# button again to play the selected file.

AUX

Press the AUX button to select the AUX mode.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 9 2016/11/23 9:40:41

1110

REMOTE CONTROL

D.IN

AUX

●

Soundbar is a Samsung proprietary name.

●

Operate the TV using the TV's remote control.

USB

Press the USB button to select the USB mode.

REPEAT

Press to set the REPEAT function during music playback from a USB

device.

OFF-REPEAT : Cancels Repeat Playback (White ).

TRACK-REPEAT : Repeatedly play a track (Red ).

ALL-REPEAT : Repeatedly play all tracks (Green ).

RANDOM-REPEAT : Plays tracks in random order. (A track that has

already been played may be played again.) ( The Red and Green

blink alternately.)

TV SOUND CONNECT

Press the TV SOUND CONNECT button to select TV SoundConnect

mode.

SOUND EFFECT

Press the SOUND EFFECT button on the remote control to select a

sound mode (Voice, Sports, 3D Sound Plus, STANDARD). Select the

STANDARD mode if you want to enjoy the original sound. We

recommend that you select a Sound Effect mode based on the source

material and your personal taste.

●

Voice : (Red )

●

Sports : (Green )

●

3D Sound Plus : (White )

AUTO POWER

Auto Power Link : Synchronizes the Soundbar to a connected Optical

source via the Optical jack so it turns on automatically when you turn on

your TV.

Press the AUTO POWER button. Each time the button is pressed, the

selection changes as follows :

AUTO POWER Link ON: Green and White

blink.

AUTO POWER Link OFF: Red and White

blink.

MUTE

Push the Mute button to turn the volume down to 0. Press again to

restore the sound to the previous volume level. If you turn mute on, the

current function LED blinks.

Skip Forward

If there is more than one file on the device you are playing, and you

press the ] button, the next file is selected.

WOOFER LEVEL

You can control the woofer volume.

Press or button on the WOOFER LEVEL button to increase or

decrease the woofer volume. You can select SW (-12, -6, -5, -4, -3, -2,

-1, 0, +1, +2, +3, +4, +5, +6). When you select the SW -12 or SW +6,

the function LED lights.

• To adjust woofer level using mobile APP (Samsung Audio Remote),

use [, ] buttons to decrease or increase woofer level within 3

seconds since WOOFER button is pressed.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 10 2016/11/23 9:40:41

1110

ENG

CONNECTIONS

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall.

▶ Installation Precautions

●

Install on a vertical wall only.

●

For the installation, avoid a location with high temperature or

humidity, or a wall that cannot sustain the weight of the set.

●

Check the strength of the wall. If the wall is not strong enough to

support the unit, reinforce the wall or install the unit on a different

wall that can support the unit's weight.

●

Purchase and use the fixing screws or anchors appropriate for the

kind of wall you have (plaster board, iron board, wood, etc.). If

possible, screw the support screws into wall studs.

●

Purchase wall mounting screws according to the type and thickness

of the wall you will mount the Soundbar on.

- Diameter : M5

- Length: 1 3/8 inches (35 mm) or longer recommended.

●

Connect cables from the unit to external devices before you install it

on the wall.

●

Make sure the unit is turned off and unplugged before you install it.

Otherwise, it may cause an electric shock.

To install the Soundbar on a wall, follow these steps:

1. Place the installation guide against the wall surface.

●

The installation guide must be level.

●

If the TV is mounted on the wall, install the Soundbar at least 2

inches (5 cm) below the TV.

2. Mark the location where the screws will go through on the wall,

and then remove the installation guide. Next, drill holes for the

screws using an appropriately sized drill bit.

3. Fasten the wall mounts and screws to the marked locations.

●

The left and right mounts are different shapes. Make sure to

position them correctly.

4. Secure the two holder screws to the screw holes on the back of

the Soundbar's main body, one on the left and one on the right.

5. Insert the USB cable into the back of the Soundbar before installing

it on the wall.

6. Set the holder screws on the back of the Soundbar into the grooves of the wall mounts.

For safe installation, make sure to push the holder screws all the way to the bottom of the grooves.

2 inches

(5 cm) or more

Wall Mounting the Soundbar

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 11 2016/11/23 9:40:43

1312

CONNECTIONS

DETACHING THE WALL MOUNT

1. Pull the Soundbar upwards as shown in the figure to separate it

from the wall mounts.

●

Do not hang onto the installed unit and avoid striking or dropping the unit.

●

Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or

damage the product.

●

When the unit is installed on a wall, please make sure that children do not pull any of the connecting

cables, as it may cause it to fall.

●

For the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm)

below the TV, if the TV is mounted on the wall.

●

For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely

to fall.

Detaching the Soundbar from the Wall Mounts

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 12 2016/11/23 9:40:44

1312

ENG

CONNECTIONS

INSTALLING THE BRACKET WITHOUT REFERRING TO THE

WALL-MOUNT INSTALLATION GUIDE

2 inches

(5 cm) or more

2 inches

(5 cm) or more

6.3 inches

(16 cm)

6.9 inches

(17.5 cm)

Minimum 12.9 ~ 13.2 inches

(32.8 ~ 33.5cm)

1. Place Wall Mount L on the desired wall surface parallel to the floor as shown above. Mark the location of the

screw holes on the wall. Drill holes for the screws at the places you have marked.

2. Match the screw holes on Wall Mount L to the screw holes on the wall, and then screw one screw through the

hole in its right end. Tighten the screw until it is firmly fixed to the wall.

3. Place Wall Mount R on the desired wall surface parallel to the floor and aligned with Wall Mount L as shown above. Mark the

location of the screw holes on the wall. Drill holes for the screws at the places you have marked.

4. Match the screw holes on Wall Mount R to the screw holes on the wall, and then screw one screw through the

hole in its right end. Tighten the screw until it is firmly fixed to the wall.

●

If you are mounting the Wall Mounts beneath the TV, make sure to position the mounts 5 cm or more below

the TV and to align the mounts with the center of the TV as shown above.

5. Insert screws through the remaining holes, and then tighten.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 13 2016/11/23 9:40:44

1514

CONNECTIONS

CONNECTING AN EXTERNAL DEVICE USING AUDIO (ANALOG)

CABLE OR OPTICAL (DIGITAL) CABLE

This unit comes equipped with one digital optical in jack and one analog audio in jack (Aux In), giving you two ways to

connect it to a TV.

Audio Cable

(not supplied)

Optical Cable

(supplied)

BD/ DVD player/

Set-top box/

Game console

AUX IN

Connect AUX IN (Audio) on the main unit to the AUDIO

OUT jack of the TV or Source Device.

To use, change the function to AUX.

or,

OPTICAL IN

Connect OPTICAL IN (Audio) on the main unit to the

OPTICAL OUT jack of the TV or Source Device.

To use, change the function to D.IN.

●

Do not connect the power cord of this

product or your TV to the wall outlet until all

connections between components are

complete.

●

Before moving or installing this product, be

sure to turn off the power and disconnect the

power cord.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 14 2016/11/23 9:40:44

1514

ENG

FUNCTIONS

INPUT MODE

Press each mode button on the remote control or the ( ) button on the main unit’s top panel to select the

mode you want.

Input mode Display

D.IN (Optical Digital in)

(White)

AUX input

(Red)

TV SoundConnect

(Green)

BLUETOOTH mode

(White)

USB mode (White)

●

Use the provided cable if a USB flash

memory device cannot be connected directly

to the unit.

The unit turns off automatically in the following situations:

●

D.IN/BT/TV/USB Mode

- If there is no audio signal for 5 minutes.

●

AUX Mode

- If the AUX cable is disconnected for 5 minutes.

- In Auto Power Down On mode, if there is no KEY

input for 8 hours when the AUX cable is

connected.

- To turn the Auto Power Down function ON or OFF,

press and hold the p button for 5 seconds.

Auto Power

Down

LED

ON

Green and Red

blink

OFF

Red and Red

blink

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 15 2016/11/23 9:40:45

1716

FUNCTIONS

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!

▶ To connect the Soundbar to a Bluetooth device

Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.

Bluetooth device

Connect

1. Press

the (

) button on the main unit’s top

panel

or press the Bluetooth button on the

remote control to display the icon LED.

●

The LED will blink indicating that the

Bluetooth device is not connected yet.

2. Select the Bluetooth menu on the Bluetooth device

you want to connect. (Refer to the Bluetooth

device's user manual.)

3. Select the Stereo headset menu on the Bluetooth

device.

●

You will see a list of scanned devices.

4. Select "[Samsung] Soundbar J-Series" from the

list.

●

If the Bluetooth device is successfully connected

to the Soundbar, then the LED will stop

blinking.

●

If the Bluetooth device has failed to pair with the

Soundbar, delete the previous "[Samsung]

Soundbar J-Series" found by the Bluetooth

device and have it search for the Soundbar again.

5. Play music on the connected device.

●

You can listen to the music playing on the

connected Bluetooth device over the Soundbar.

●

In BT mode, the Play/Pause/Next/Prev functions

are not available. However, these functions are

available in Bluetooth devices supporting AVRCP.

●

If asked for a PIN code when connecting a

Bluetooth device, enter <0000>.

●

Only one Bluetooth device can be paired at a

time.

●

The Bluetooth connection will be terminated

when you turn the Soundbar off.

●

The Soundbar may not perform Bluetooth

search or connection correctly under the

following circumstances:

- If there is a strong electrical field around

the Soundbar.

- If several Bluetooth devices are

simultaneously paired with the Soundbar.

- If the Bluetooth device is turned off, not in

place, or malfunctions.

- Note that such devices as microwave

ovens, wireless LAN adaptors, fluorescent

lights, and gas stoves use the same

frequency range as the Bluetooth device,

which can cause electric interference.

●

The Soundbar supports SBC data (44.1kHz,

48kHz).

●

Connect only to a Bluetooth device that

supports the A2DP (AV) function.

●

You cannot connect the Soundbar to a

Bluetooth device that supports only the HF

(Hands Free) function.

●

Once paired, if the Soundbar is in D.IN, AUX,

or USB mode, selecting "[Samsung]

Soundbar J-Series" from the list on your

Bluetooth device will automatically change

the Soundbar's mode to BT.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 16 2016/11/23 9:40:45

1716

ENG

FUNCTIONS

▶ Bluetooth POWER on (Bluetooth POWER)

When the Bluetooth Power On function is on and the Soundbar is turned off, if a previously paired Bluetooth device

tries to pair with the Soundbar, the Soundbar turns on automatically.

1. To turn Bluetooth Power ON, press the Bluetooth POWER button on the remote while the Soundbar is turned

on.

2. The Green or Red , White , and Green

LEDs appear on the Soundbar's display.

Bluetooth POWER LED

ON

Green , Green and White blink

OFF

Red , Green and White blink

●

Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device

and the Soundbar must have been previously paired at least once.)

●

The Soundbar will appear in the Bluetooth device’s searched devices list only when the Bluetooth LED is

blinking.

●

In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

▶ To disconnect the Bluetooth device from the Soundbar

You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.

●

The Soundbar will be disconnected.

●

When the Soundbar is disconnected from the Bluetooth device, the will blink on the Soundbar's top display.

▶ To disconnect the Soundbar from the Bluetooth device

Press one of the other mode buttons

on the remote control or the ( ) button on the main unit’s top panel

to

switch from to another mode or turn off the Soundbar.

●

The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

●

In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 16.25 ft. (5 m).

●

The Soundbar automatically turns off after 5 minutes in the Ready state.

More About Bluetooth

Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a

short wireless connection.

●

A Bluetooth device may cause noise or malfunction, depending on usage, if:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the

Soundbar.

- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.

- It is exposed to electrical interference from same frequency-band devices including medical equipment,

microwave ovens, and wireless LANs.

●

Pair the Soundbar with the Bluetooth device while they are close together.

●

The further the distance between the Soundbar and Bluetooth device, the worse the quality is.

If the distance exceeds the Bluetooth operational range, the connection is lost.

●

In poor reception areas, the Bluetooth connection may not work properly.

●

The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the

Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as

walls or doors.

●

This wireless device may cause electric interference during its operation.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 17 2016/11/23 9:40:46

1918

FUNCTIONS

USING THE SAMSUNG AUDIO REMOTE APP

Installing the Samsung Audio Remote App

To control the product with your Smart Device via the Samsung Audio Remote app, download the Samsung Audio

Remote App from the Google Play store.

Starting the Samsung Audio Remote App

After you install the Samsung Audio Remote app, follow the instructions in the app.

●

The Samsung Audio Remote APP is only supported on phones running Android OS 3.0 or above.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 18 2016/11/23 9:40:46

1918

ENG

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV

SoundConnect function.

▶ Connecting a TV to the Soundbar

Connect

1. Turn on the TV and Soundbar.

●

Set the "Add New Device" menu selection of the

TV to "On".

2. Press the

( )

button on the main unit’s top panel

or the

TV SOUND CONNECT

button on the

remote control to select the TV mode.

●

The Green

LED will blink indicating that TV

is not connected yet.

3. On the TV, a message asking whether to enable the

TV SoundConnect function appears. "[Samsung]

Soundbar" is displayed on the TV screen.

4. Select <Yes> using the TV remote to finish

connecting the TV and Soundbar.

●

The Green LED will stop blinking when the

TV has successfully connected.

●

Switching the Soundbar’s mode from TV to

another mode automatically terminates TV

SoundConnect.

●

To connect the Soundbar to another TV, the

existing connection must be terminated.

●

To terminate the existing connection, press

and hold the p button on the remote for 5

seconds to connect to the other TV, follow

Steps 1 through 4 above.

●

The TV SoundConnect (SoundShare) function

is supported by some Samsung TVs released

from 2012 on. Check whether your TV

supports the TV SoundConnect

(SoundShare) function before you begin. (For

further information, refer to the TV’s user

manual.)

●

If your Samsung TV was released before 2014,

check the SoundShare setting menu.

●

If the distance between the TV and Soundbar

exceeds 16.25 ft. (5m), the connection may

not be stable or the audio may stutter. If this

occurs, relocate the TV or Soundbar so that

they are within operational range, and then

re-establish the TV SoundConnect

c

onnection.

●

TV SoundConnect Operational Ranges:

- Recommended pairing range: within 20

inches (within 50cm)

- Recommended operational range: within

16.25 ft. (5m)

●

The Play/Pause, Next, Prev buttons are not

operable in TV SoundConnect mode.

▶ Using the Bluetooth POWER On

function

The Bluetooth POWER On function is available after you

have successfully connected the Soundbar to a

Bluetooth compatible TV using TV SoundConnect.

When the Bluetooth POWER On function is ON, turning

the connected TV on or off will turn the Soundbar's

power on and off as well.

1. Connect the TV to your Soundbar using the TV

SoundConnect function.

2. Press the Bluetooth POWER button on the

Soundbar remote. The Green or Red , , and

Green

LEDs appear on the Soundbar's display.

●

Green : The Soundbar turns on and off when

you turn the TV on or off.

●

Red : The Soundbar only turns off when you

turn the TV off.

●

This function is supported by some Samsung

TVs released from 2013 on.

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 19 2016/11/23 9:40:47

2120

FUNCTIONS

USB

You can play music files located on USB storage devices through the Soundbar.

Display

USB port

1. Connect the USB device to the USB port on the

product.

2. Press the

( )

button on the main unit’s top panel

or the

USB

button on the remote control to select

the USB mode.

●

The LED will blink indicating that the USB

device is not connected yet or the Soundbar is in

stop/pause mode or the USB is in "no data"

mode.

●

The LED will stop blinking when the USB

device has successfully connected.

●

The Soundbar automatically turns off if no USB

device has been connected for more than 5

minutes.

▶ Before you connect a USB device

Be aware of the following:

●

This product may not be compatible with certain

types of USB storage media.

●

The Soundbar supports the FAT16 and FAT32 file

systems.

- The NTFS file system is not supported.

●

Connect USB devices directly to the USB port of the

product. Otherwise, you may encounter a USB

compatibility problem.

●

Do not connect multiple storage devices to the

product via a multi-card reader. It may not operate

properly.

●

Digital camera PTP protocols are not supported.

●

Do not remove the USB device while it is

transferring files.

●

DRM-protected music files (MP3, WMA) from

commercial web sites cannot be played.

●

External HDDs are not supported.

●

Mobile phone devices are not supported.

●

File Format Type Compatibility list:

Format Codec Sampling Rate Bitrate

*.mp3

MPEG 1 Layer2

16KHz ~ 48KHz

80kbps~320kbps

MPEG 1 Layer3

MPEG 2 Layer3

MPEG 2.5

Layer3

*.wma

Wave_Format_

MSAudio1

56kbps~128kbps

Wave_Format_

MSAudio2

*.aac

AAC

16KHz ~ 96KHz

48kbps~320kbps

AAC-LC 128kbps~192kbps

HE-AAC 24KHz ~ 96KHz 48kbps~64kbps

*.wav

-

16KHz ~ 48KHz

up to 3000kbps

*.ogg

OGG 1.1.0 50kbps~500kbps

*.flac

FLAC 1.1.0,

FLAC 1.2.1

16KHz ~ 96KHz up to 3000kbps

HW-J250_TK_AH68-02983U-ENG-00_20161123.indd 20 2016/11/23 9:40:47

Sayfa yükleniyor...

Samsung HW-J250 Kullanım kılavuzu

Samsung HW-J250 Kullanım kılavuzu

diğer dillerde

İlgili makaleler