12
EN
1. Place the product on the charging cradle 4 (see Fig. B).
Make sure the protrusion on the charging cradle fits inside the
hole at the bottom of the product for charging.
2. Plug the USB cable 5 into the USB port of a compatible
USB power source (e.g. a USB power adapter) for charging.
Charging starts automatically. The indicator light 3 flashes
green during charging (see Fig. B).
3. When charging is done, the indicator light stops flashing and
stays green. Unplug the USB cable from the USB power
source.
6 Operation
• The product is equipped with 5 modes: “Clean”,
“White”, “Sensitive”, “Polish” and “Massage”. When
using the product for the first time, start with the
“Clean” mode before changing to other modes.
• The product remembers your last selected mode for
your next use.
6.1 Cleaning your teeth
1. Attach the brush head 1 to the product (see chapter
“Replacing the brush head”).
Clean the brush head before first use as described in the
chapter “Cleaning”.
2. Hold the brush head under running water for a moment to
make it wet.
3. Apply toothpaste to the brush head.
4. Carefully move the brush head up to your teeth.
5. Press the operation button 2 once.
The product is now switched on in the “Clean” mode. It is
suitable for daily teeth cleaning.
The indicator light 3 illuminates white in this mode.
6. Within 5 seconds, press the operation button a second time.
The product is now in the “White” mode. It is suitable for
removing stains and whitening teeth.
The indicator light illuminates green in this mode.
7. Within 5 seconds, press the operation button a third time.
The product is now in the “Sensitive” mode. It is suitable for a
gentle yet thorough cleaning of sensitive teeth and gums.
The indicator light illuminates yellow in this mode.