Yamaha A-S1100 Kullanım kılavuzu

Printed in Malaysia ZQ25580

G

Integrated Amplifier

Amplificateur Intégré

ИНСТРУКЦИЯ ПО ЭКСПЛУАЦИИ

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

2 En

A Living Tradition in Sound

A piano comes into this world through the perfect synergy of advanced technical

skill and artistry. Such a piano can create sound that truly reflects the player’s

feelings.

The final stage in piano production is called “voicing”. It is here that the

instrument is given its soul.

A highly skilled expert concentrates his mind and sensitivity on the sound of each

key, finely adjusting the dynamic feel of the hammers, bringing the tone and

vibrancy of all 88 keys together perfectly; a truly stunning achievement.

It is a quality of sound that can only be determined by an astute, sensitive ear. We

apply this very same concept to the manufacture of our audio products. The

technician performs exhaustive listening tests and every component is considered,

in order to finally achieve the ideal sound.

Yamaha’s tradition of audio quality stretches back over 125 years, and continues to

live on in all Yamaha products today.

3 En

NP-S2000

Soavo-1

NS-10M

A-S3000

CD-S3000

NS-20

CA-1000

NS-690

B-1

PX-2

C-2

NS-1000M

A-1

B-6

B-2x

MX-10000

CX-10000

Excellence in Audio Achievement

First HiFi System introduced in 1920

We introduced numerous HiFi components

(turntables, FM/AM tuners, integrated

amplifiers, preamplifiers, power amplifiers

and speakers) in 1955 - 1965.

Natural Sound Speaker Series introduced

in 1967

NS-20 Monitor Speaker

CA-1000 Integrated Amplifier

Featuring A-Class operation, the CA-1000 set

the standard for integrated amplifiers.

NS-690 Natural Sound Speaker

NS-1000M Monitor Speaker

A truly legendary speaker still revered by HiFi

enthusiasts.

B-1 Power Amplifier

An innovative power amp that used vertical FETs in all

stages.

C-2 Control Amplifier

Received top prize at the Milan International Music

and HiFi Show.

NS-10M Studio Monitor Speaker

Became of the most popular studio monitors

in the world.

A-1 Integrated Amplifier

PX-2 Turntable

Yamaha’s first straight arm turntable.

B-6 Power Amplifier

Pyramid-shaped power amplifier.

GT-2000/L Turntab le

First CD Player (CD-1) introduced in 1983

B-2x Power Amplifier

MX-10000 Power Amplifier and

CX-10000 Control Amplifier

Redefined the capabilities of separate components.

AX-1 Integrated Amplifier

GT-CD1 CD Player

MX-1 Power Amplifier and

CX-1 Preamplifier

Soavo-1 and Soavo-2 Natural Sound

Speaker Systems

A-S2000 Integrated Amplifier and

CD-S2000 CD Player

NP-S2000 Network Player

A-S3000 Integrated Amplifier and

CD-S3000 CD Player

4 En

◆ Floating & Balance power amplifier circuit

◆ Parallel volume and tone control

◆ Large power supply with four separate circuits

◆ Left-right symmetrical design with rigid, stable construction

◆ Discrete phono amplifier

■ Supplied accessories

Please check that you have received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) (×2)

• Power cable

• SAFETY BROCHURE

■ About this manual

• y indicates a tip for your operation.

• Photographs and illustrations are for explanatory purposes, and may differ from the actual unit.

• Read the “SAFETY BROCHURE” before using this unit.

Contents

Controls and functions.......................................................................................................................................... 6

Connections.......................................................................................................................................................... 16

Appendix. ............................................................................................................................................................. 24

Troubleshooting. ............................................................................................................................................... 28

5 En

Controls and

functions

In this chapter, you will learn the controls and functions of A-S1100.

CONTROLS AND FUNCTIONS

6 En

Controls and functions

■ Front panel (pages 6 to 9)

1 STANDBY/ON, OFF switch

Turns on or off this unit.

STANDBY/ON (upper position): With this switch

position, pressing the p AMP key on the remote

control toggles the power between STANDBY and

ON.

OFF (lower position): The power of this unit is

turned off.

• When you turn on this unit, it will take a few seconds

before this unit can reproduce sound.

• If you disconnect the power cable from the AC outlet and

connect it again when this unit is in STANDBY mode, the

power of the unit is turned on. If the unit is not to be

operated for a long time, set the STANDBY/ON, OFF

switch to OFF.

2 STANDBY/ON indicator

Lit brightly: Shows that the power of the unit is ON.

Lit dimly: Shows that the unit is in STANDBY mode.

Off: Shows that the power of the unit is OFF.

3 PHONES jack

Connects your headphones.

• When headphones are plugged in:

– Both speaker sets connected to the SPEAKERS L/R CH

terminals are turned off.

– No signals are output at the PRE OUT jacks.

– You cannot select MAIN DIRECT as the input source.

• If headphones are plugged into the PHONES jack while

MAIN DIRECT is selected as the input source, no audio is

output at the PHONES jack.

123

4567 8 9

Notes

7 En

4 SPEAKERS selector

Turns on or off the sets of speakers connected to the

SPEAKERS L/R CH A and/or B terminals on the rear

panel, as follows.

OFF: Both sets of speakers are off.

A/B: The set of speakers connected to the A or B

terminals is on.

A+B BI-WIRING: Both sets of speakers are on.

If you use two sets (A and B), the impedance of each speaker

must be 8  or higher.

5 METER selector

Switches the meter function as follows:

OFF: Turns off the meter and the illumination.

PEAK: The meter functions as a peak level meter.

The peak level meter shows a momentarily highest

audio output level.

VU: The meter functions as a VU (Volume Unit) level

meter. The VU level meter shows an effective

audio output value that is similar to human senses.

6 Meters (LEFT/RIGHT)

Show the audio output level of the left (LEFT) and

right (RIGHT) channels in VU or PEAK meter mode.

The VU or PEAK meter can be selected by the

METER selector.

7 BASS control

Adjusts the volume level of the bass range.

Control range: –10 dB to 0 to +10 dB

8 TREBLE control

Adjusts the volume level of the treble range.

Control range: –10 dB to 0 to +10 dB

9 BALANCE control

Adjusts the audio output balance of the left and right

speakers to compensate for sound imbalances caused

by speaker locations or listening room conditions.

• When both the BASS and TREBLE controls are set to the 0

position, audio signal bypasses the tone control circuitry.

• Adjusting the BASS, TREBLE, and BALANCE controls does

not affect input signals at the MAIN IN jack and output signals

at the LINE 2 REC jack.

Caution

Notes

English

8 En

Controls and functions

■ Front panel (pages 6 to 9)

0 Remote control sensor

Receives signals from the remote control.

A INPUT selector/indicator

Selects the input source. The indicator of the input

source selected with the INPUT selector lights. The

audio signals of the selected input source are also

output at the LINE 2 REC jacks.

MAIN DIRECT: Selects the component connected to

the MAIN IN jacks. When MAIN DIRECT is

selected as the input source, the audio signals are

not output at the PRE OUT, LINE 2 REC and

PHONES jacks.

LINE 1/LINE 2: Selects the component connected to

the LINE 1 or LINE 2 jacks.

CD: Selects the CD player connected to the CD jacks.

TUNER: Selects the tuner connected to the TUNER

jacks.

PHONO: Selects the turntable connected to the

PHONO jacks.

When LINE 2 is selected, the audio signals are not output at

the LINE 2 REC jacks.

0

A

Note

9 En

B AUDIO MUTE switch

Press downward to reduce the current volume level by

approximately 20 dB. Press again to restore the audio

output to the previous volume level.

y

You can also rotate the VOLUME control on the front panel

or press the VOLUME + or – key on the remote control to

resume the audio output.

C AUDIO MUTE indicator

Lights when the mute function is turned on with the

AUDIO MUTE switch.

D VOLUME control

Controls the volume level. This does not affect the

output level at the LINE 2 REC jacks.

The VOLUME control does not affect when you select

MAIN DIRECT as the input source. Adjust the volume level

using the volume control on the external amplifier connected

to the MAIN IN jacks.

C D

B

Note

English

10 En

Controls and functions

■ Rear panel

1 PRE OUT jacks

y

• The PRE OUT jacks output the same channel signal as the

SPEAKERS L/R CH terminals.

• When you connect a stereo cable to the PRE OUT jacks to

drive the speakers using an external amplifier, it is not

necessary to use the SPEAKERS L/R CH terminals.

• The signal output at the PRE OUT jacks are affected by the

BASS and TREBLE control settings.

2 SPEAKERS L/R CH terminals

3 TUNER input jacks

4 PHONO input jacks

5 CD input jacks

6 MM/MC switch

Selects the type of cartridge of the turntable connected

to the PHONO jacks.

MM: Choose this setting if the connected turntable

uses an moving magnet (MM) cartridge.

MC: Choose this setting if the connected turntable

uses an moving coil (MC) cartridge.

y

When you replace the cartridge, be sure to turn off this unit.

7 GND (Ground) terminal

8 LINE 1 input jacks

9 LINE 2 jacks

PB (playback) input jacks and REC (recording) output

jacks are provided.

2 4768590

1

3

See page 16 for connection information.

11 En

0 MAIN IN jacks

Use these jacks to connect an external component

equipped with a volume control.

y

When you select MAIN DIRECT as the input source, the

volume level is fixed.

Adjust the volume level using the volume control on the

external amplifier connected to the MAIN IN jacks when you

select MAIN DIRECT as the input source.

For the connection to the

MAIN IN

jacks, see pages 16 and 17.

A AUTO POWER STANDBY switch

ON: The unit enters STANDBY mode automatically

if not operated for 8 hours.

OFF: The unit does not enter STANDBY mode

automatically.

B TRIGGER IN jack

Use this jack to connect an external component for the

trigger function.

For details on the connection, see page 21.

C REMOTE IN/OUT jacks

Use these jacks to connect an external component for

remote control.

For details on the connection, see page 20.

D SYSTEM CONNECTOR

Use this connector to connect a product testing device

for servicing.

E AC IN inlet

Use this inlet to plug in the supplied power cable.

For details on the connection, see page 19.

F Foot

If this unit is unstable, you can adjust the foot height

by rotating it.

E2F

ABCD

English

12 En

Controls and functions

■ Remote control

1 Infrared signal transmitter

Outputs infrared control signals.

2 p AMP key

Turns this unit ON or switches it to STANDBY mode.

For details on STANDBY mode, see “Front panel”

(page 6).

3 Input select keys

Selects the input source.

The audio signals of the selected input source are

output at the LINE 2 REC jacks.

y

When LINE 2 is selected as the input source, the audio

signals are not output at the LINE 2 REC jacks.

LINE: Selects the component connected to the

LINE 1 or LINE 2 jacks.

PHONO: Selects the turntable connected to the

PHONO jacks.

MAIN DIRECT: Selects the component connected to

the MAIN IN jacks. When MAIN DIRECT is

selected as the input source, the audio signals are

not output at the PRE OUT, LINE 2 REC and

PHONES jacks.

CD: Selects the CD player connected to the CD jacks.

TUNER: Selects the tuner connected to the TUNER

jacks.

4 Tuner control buttons

Control functions of Yamaha tuner. Refer to the

owner’s manual of your tuner for details.

Certain Yamaha tuners may not respond to some of these

control keys on the remote control.

4

2

1

3

6

7

AMP CD

OPEN/CLOSE

LINE LINE

PRESET

12

PHONO

MAIN DIRECT

CD TUNER

BAND

MUTE

SOURCE LAYER

VOLUME

5

Note

13 En

5 CD player control keys

Control various functions of Yamaha CD player. Refer

to the owner’s manual of your CD player for details.

p CD key: Turns the CD player ON or switches it to

STANDBY mode.

OPEN/CLOSE key: Opens/closes the disc tray of

the CD player.

(Play): Starts playback.

(Pause): Pauses playback. Press the or to

resume playback.

(Stop): Stops playback.

/ (Skip): Skips to the next track, or skips

back to the beginning of the current track.

SOURCE: Selects the source to be played on the CD

player. The playback source changes each time this

key is pressed.

LAYER: Switches the playback layer of a hybrid SA-

CD between SA-CD and CD.

Certain Yamaha CD players may not respond to some of

these control keys on the remote control.

6 VOLUME +/– keys

Control the volume level.

The VOLUME keys do not affect when you select MAIN

DIRECT as the input source. Adjust the volume level on the

external amplifier connected to the MAIN IN jacks.

7 MUTE key

Reduces the current volume level by approximately

20 dB. Press again to restore the audio output to the

previous volume level. Pressing the VOLUME + or –

key also cancels muting.

Note

English

14 En

Controls and functions

■ Installing batteries in the remote control

1 Remove the battery compartment cover.

2 Insert the two batteries (AAA, R03, UM-4)

according to the polarity markings (+ and –)

on the inside of the battery compartment.

3 Reinstall the battery compartment cover.

■ Operating range of the remote control

y

The remote control transmits a directional infrared beam. Be

sure to aim the remote control directly at the remote control

sensor on the front panel of this unit during operation.

2

1

3

30 30

Approximately 6 m

(20 ft)

Connections

In this section, you will make connections between A-S1100, speakers,

and source components.

16 En

Connections

• Do not let the bare speaker wires touch each other or do not let

them touch any metal part of this unit. This could damage this

unit and/or the speakers.

• All connections must be correct: L (left) to L, R (right) to R,

“+” to “+”, and “–” to “–”. If the connections are faulty, no

sound will be heard from the speakers, and if the polarity of the

speaker connections is incorrect, the sound will be unnatural

and lack bass. Also, refer to the owner’s manual for each of

your components.

• Use RCA unbalanced cables to connect other components

except speakers.

• Connect your turntable to the GND terminal to reduce noise in

the signal. However, you may hear less noise without the

connection to the GND terminal for some turntables.

Notes

+

-

+

-

CD player with

RCA jacks

Speakers A

(R channel)

Speakers B

(R channel)

Turntable

Ground

Tuner

BD player, etc.

17 En

• Because the power amplifier of A-S1100 is of the floating balanced type, the

following types of connections are not possible.

– Connecting with the left channel “–” terminal and the right channel “–” terminal

as well as “+” terminals (Fig. 1).

– Connecting with the left channel “–” terminal and the right channel “–” terminal

inverted (cross connection, Fig. 2).

– Deliberately connecting with the left/right channel “–” terminals and metal part

on the rear panel of this unit, as well as accidentally touching them.

• Do not connect your active subwoofer to the SPEAKERS L/R CH terminal.

Connect it to the PRE OUT jacks.

• Do not connect a component with no volume control, such as a CD player, to the

MAIN IN jacks, as the volume level of the signals input to the MAIN IN jacks is

fixed. If such equipment is connected, a sound may burst, and the unit and/or

speaker may be damaged.

Notes

+–

+

-

CD recorder,

tape deck, etc.

Speakers A

(L channel)

Speakers B

(L channel)

External amplifier or

active subwoofer

Preamplifier,

AV receiver, etc.

English

+

–

+

–

L

R

+

–

+

–

L

R

+

–

+

–

L

R

+

–

+

–

L

R

Fig. 1 Fig. 2

18 En

Connections

■ Connecting the speakers

1 Remove approximately 10 mm of insulation

from the end of each speaker cable and twist

the exposed wires of the cable together to

prevent short circuits.

2 Unscrew the knob and then insert the bare

wire into the hole.

3 Tighten the knob.

When loosening the knob of the speaker terminal, do not rotate it

excessively. The knob may come off and pose the danger of being

swallowed by a child.

• Touching the speaker terminal with a metallic rack may cause

short circuit and damage this unit. When installing the unit in a

rack, maintain a sufficient clearance to prevent the speaker

terminals from touching the rack.

• To reduce the risk of electric shock, do not touch the speaker

terminal when the unit is turned on.

■ Connecting the banana plug

(Except for Europe models)

First, tighten the knob and then insert the banana

plug into the end of the corresponding terminal.

■ Connecting the Y-shaped lug

1 Unscrew the knob and then sandwich the Y-

shaped lug between the ring part and base.

2 Tighten the knob.

Caution

Notes

10 mm

Hole for speaker cable:

6.0 mm dia.

Banana plug

Hole for banana plug:

3.95 mm dia.

Y-shaped lug

Slide

Terminal screw for Y-shaped

lug: 5.8 mm dia.

19 En

■ Bi-wire connection

The bi-wire connection separates the woofer from the

combined midrange and tweeter section. A bi-wire

compatible speaker has four binding post terminals. These

two sets of terminals allow the speaker to be split into two

independent sections. This split connects the mid and high

frequency drivers to one set of terminals and the low

frequency driver to the other pair.

Example of a bi-wiring connection (R channel)

To use the bi-wire connections, the impedance of each speaker

must be 8  or higher.

Remove the shorting bars or bridges to separate the LPF (low

pass filter) and HPF (high pass filter) crossovers.

y

To use the bi-wire connections, switch the SPEAKERS selector

on the front panel to the A+B BI-WIRING position.

■ Connecting the power cable

Plug the power cable into the AC IN inlet when all

connections are complete, and then plug in the power

cable to the AC outlet.

Caution

Note

SPEAKERS R CH

A

B

+

Rear panel of A-S1100 Speaker

to an AC outlet

Rear panel of A-S1100

Supplied power cable

English

20 En

Connections

■ Operating this unit from another room

If you connect an infrared receiver and transmitter to the

REMOTE IN/OUT jacks of this unit, you can operate the

unit and/or external component using the supplied remote

control located in another room.

■ Remote connection between Yamaha

components

When you have another Yamaha component supporting

remote connection, as this unit does, an infrared

transmitter is not necessary. You can transmit remote

signals by connecting an infrared receiver and the

REMOTE IN jack of the other component to the

REMOTE IN/OUT jacks of this unit, using cables with

monaural miniplugs.

Up to three Yamaha components (including this unit) can

be connected.

TRIGGER

REMOTE

SYSTEM CONNECTOR

IN IN OUT

Rear panel of A-S1100

Infrared receiver

Remote control

Infrared transmitter

External component

(CD player, etc.)

TRIGGER

REMOTE

SYSTEM CONNECTOR

IN IN OUT

REMOTE

IN OUT

Rear panel of A-S1100

Infrared receiver

Remote control Yamaha component

(up to three

components

including this unit)

Monaural mini-plug

cable

Sayfa yükleniyor...

Yamaha A-S1100 Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Yamaha A-S1100 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler