EnGenius SN-358 PLUS Kullanım kılavuzu

Kategori
Telefonlar
Tip
Kullanım kılavuzu

Bu kılavuz için de uygundur

SN-358 SKYPE
SN-358 PLUS
RU
EPA
TR
This product is prohibited to be
used without permission from the
government authorities in the
relevant jurisdictions
6
Outdoor Antenna with cabl
e
(optional)
7
Hi-Power Battery
CD-ROM
(optional)
8
9
10
T
raveling Adaptps
(optional)
Before Initial Use
Please read IMPORTANT SAFETY INSTRUCTIONS on pages!54~55 before use.
Read and understand all instructions.
Accessories
1
Instruction manual
1book
2
AC adaptor for base unit
1pc
3
Telephone line
1pc
4
Telescopic antenna for base unit
1pc
5
Standard Battery
1pc
USB Cable
1 pc (For SN-358 SKYPE only)
1 pc (For SN-358 SKYPE only)
* Thank you for purchasing this SN-358 SKYPE/SN-358 PLUS
cordless telephone, one of the high-quality products of SENAO.
* To obtain optimum performance, be sure to read this manual
carefully before starting operation and keep it for furure reference.
* SKYPE function only supported by SN-358 SKYPE.
(1)
(2)
(3) (4)
(5)
(8) (Optional)
(9) (Optional)
(10) (Optional)
(6) (7)
1
Raise the base unit antenna and
fully both the telescopic antenna of
base unit and handset.
Operating Distance/Noise
Calls are transmitted between the base unit and the handset using wireless radio
waves. For maximum distance and noise free operation, the recommended base
unit location is:
A
way from electronic
appliances such as a TV, PC o
r
another cordless phone.
In a HIGH and CENTRAL location
with no obstructions such as walls.
2
Contents
Before Initial Use..........................................................................................................
Accessories..................................................................................................................
Operating Distance/Noise ....................................................................................
Contents .......................................................................................................................
Features........................................................................................................................
Diagram ........................................................................................................................
Handset Diagram ..................................................................................................
Handset LCD Icon.................................................................................................
Base Unit Diagram................................................................................................
Installation....................................................................................................................
A. Base Unit...........................................................................................................
B. Handset.............................................................................................................
C. Optional Travel charger ...................................................................................
D. Optional Ear-microphone ................................................................................
E. Battery Charge................................................................................................
F. Installation of Outdoor Antenna....................................................................
Basic Operation for Base .........................................................................................
Handset Operation and Function ............................................................................
TALK Menu ................................................................................................................
INT Menu....................................................................................................................
Phone Book...............................................................................................................
Using the Menu .........................................................................................................
A. By scrolling....................................................................................................
B. By shortcut ....................................................................................................
Menu Functions..........................................................................................................
Operation for SKYPE.................................................................................................
Troubleshooting Guide.............................................................................................
Specification..............................................................................................................
Important Safety Instructions ..................................................................................
A. Installation.......................................................................................................
B. SKYPE operation..............................................................................................
C. Advance setup.................................................................................................
D. System requirement........................................................................................
25
29
31
32
33
35
35
35
37
43
43
47
48
52
54
55
3
Features
* Multi-handset system (up to 99)
* PC-based SKYPE function. (SN-358 SKYPE only)
* Vibration mode
* Selectable ring and page tone on handset (16 melodies) and base ring tone (10
melodies)
* Handset with scrolling keys
* Handset custom name edit
* Walkie-talkie between handsets
* Multi-language display
* Multi-channel with auto-scan
* Base speakerphone with dial keypad
* 50 phone book memory with name/number on each handset
* Last 10 calls redial on handset
* 30 caller id memory with time/date (FSK & DTMF type)
* Auto detection of FSK and DTMF caller id signal
* Caller id with call waiting (CIDCW)
* 20 memory dial on base unit
* Base unit with last number redial
* LCD and handset keypad with backlit
* Tone/Pulse dialing mode selectable
* Change channel during conversation
* Flash time programmable
* Ring volume adjustable for both handset and base
* Voice volume adjustable for both handset and base
* Handset with power saving function
* Low battery alert and display
* Built- in voice security circuit (Scrambler)
* Auto answer and auto hang up
* Transferring a call between handsets and base
* Out-of-range alert
* Battery charge indicator
* Fast charge
* Adjustable keypad volume on handset
* Talk-time display on handset
4
Diagram
Handset Diagram
Operation keys
: Talk / Flash key
: Intercom key
:
End key; Power On/Off; Back to
stand by mode from menu
Microphone
Dialing keys
Receiver
Display (LCD)
Left Soft Ke
y
Right Soft Key
Scrolling Keys
PTT key: Push To Talk
Ear- Microphone jack
Battery Pack Release Button
Battery Pack
Charge Contacts
SKYPE Key (Caller ID Key in SN-358PLUS)
Speakerphone
Travel Adaptor Jack
5
Base Unit Diagram
Tel jack
Line jack
USB jack
Antenna
DC IN jack
Handset LCD Icon
Signal strength: The more segments displayed in the bar graph, the better the
signal strength.
ID number of handset.
Battery strength: The more segments displayed in the bar graph, the greater
the battery charged, when battery low show up, the handset will alarm you
with “Bee Bo” sound.
Ringing mode.
Vibration mode.
6
FUNCTION KEYS:
TRANSSFER;
MEMORY; HOLD;
FLASH;REDIAL/P
VOLUME UP/DOWN
Speakerphone Button
Speaker
INDICATORS:
CALLER ID; POWER;
IN USE; SKYPE;MULTI-
TALK
INTERCOM
SKYPE
7
)4*
Installation
A. Base Unit
Please set up the base unit according to the following steps.
(1) Install the telescopic antenna of the
base unit and extend it fully and
vertically.
(2) Plug in the SENAO AC
adaptor to DC IN jack.
(2) (6) (5) (4)
(3) Plug the AC adaptor into
supporting wall outlet.
(4) Insert the included
telephone line into
the LINE jack and
also the telephone
line into a wall jack.
(5) A standard telephone
may also be plugged into
TEL jack.
(6) Plug USB cable with
your PC/NB for SKYPE
connection
NOTE: Please refer to P31 for SKYPE Installation.
8
B. Handset
To install battery pack:
First carefully slide the bottom battery pack tabs
into open slot at the back of the phone as shown in
Figure 1. The bottom of the battery pack should
lock into the back of the handset. Press down on
the top of the battery pack into the handset and you
should hear a “click” which signifies the battery
securing into place on the handset.
To remove the handset battery:
Turn the handset face down and locate the battery
release button at the middle of the handset.
Push the release button and lift the battery pack up
C. Optional Travel charger
Boasting an extremely light and function design, the optional
travel charger is designed for fast charging of your phone
battery quickly. Plus the charger into a wall socket and insert
the connector directly to the bottom of your phone.
Charging time is approximately 2 hours for a standard size
battery pack. Your phone can be used during charging.
D. Optional Ear-microphone
Your handset can become hands-free with the optional ear microphone. Calls can be
answered by simply pressing the button located on the microphone. The ear
microphone can also be used in the walkie-talkie function. Press the button to talk, and
release to listen. To end calls, press and hold the button.
9
Charger
Cradle
SKYPE
E. Battery Charge
The handset can be charged on the charger cradle of base.
1. Place the handset in the charger cradle with keypad facing up.
2. While charging the handset, the LCD on handset will display “Battery in charger"
3. While the handset has been fully charged, the LCD on handset will display
“Battery charge OK".
4. The life time of battery will be affected by the surrounding temperature; the LCD on
handset will display "Charge state fail" and stop charging automatically while the
surrounding temperature is too high. The charging will be resumed once the
temperature is come down to be below 40 .
The suggested environment temperature is between 10 ~30 .
5.
10
F. Outdoot Antenna
Installation of the outdoor antenna is very
important for communication range and quality.
Be sure to follow the following steps.
1. Use the wrench to screw the antenna tightly.
2. Lock the 3 ground planes with the base part as
illustrated in Figure 2.
NOTE: Long and short ground planes should be
alternately arranged.
Ground planes x3
Ground planes x3
Figure 2
Figure 1
11
3. Assemble cable jack with the base part as illustrated
in Figure 3.
4. Find a pole which is over 5M long and 22~39mm in
diameter and screw it with the base tube as indicated in
Figure 4.
Note: A bamboo pole is preferred. If a metal one is
used, be sure it is isolated.
5. Put up the pole and make a loop with the
cable cord. The loop which is 15cm in diameter
to prevent water from going down into the base
unit (as figure 5).
6. The assembled outdoor antenna
(as indicated in Figure 6).
12
Notes:
1. Make sure that the cable is tied to the cable connector in order to
maintain the radio frequency transmission performance.
2. The ground plane should be at least 3 meters above the ground.
3. No obstruction can be existed within 3 meters from the antenna
(as shown in Fig 7~9).
4. Straighten the remaining cable.
5. Bending cable cord will increase loss of transmission power.
6. Make a loop before pulling the cable into the house. The loop
can prevent rain from going into the house.
7. The higher the antenna is installed the better the communication
will be.
8. keep the antenna and cable away from high-voltage source to
avoid electric shocks. Don’t install the antenna in the rain to avoid
thunder striking.
Figure 9
Figure 8
Figure 7
Over 3M (correct)
Less than 3M (incorrect)
Over 3M
(correct)
Over 3M
(correct)
Over 3M (correct)
Less than 3M
(incorrect)
13
Basic Operation for Base
A. Call function
1. Making calls
Press first and then dial the number after hearing the dial tone.
For example, dial the phone number 22183588. 22183588
To hang up, press again.
2. Redial
While in standby mode, press first, then press Redial .
Redial
3. Automatic Dialing
1. First store phone numbers into the memory (20 sets of 16-digit number maximum)
(in stand-by mode)
MEMORY 22183588 MEMORY N
Phone number Store (N: 00~19)
2. If the base unit is connected to a PBX.
We recommend you press REDIAL/P (PAUSE) followed the access number 0 or
9 for an outside line and the phone number.
NOTE: Pressing REDIAL/P (PAUSE) once creates a 3 second pause. This can
prevents miss dialing when you redial or dial a stored number.
3. Dialing a stored number (in standby mode)
Auto dial the phone number stored in location " N ".
Press First, then press MEMORY N after hearing the dial tone.
MEMORY N (N: 00~19)
14
4. Answering Calls
Press to answer a call.
To hang up, press again.
4. Paging the target handset from the base unit
1. N N  paging ( N N is the ID of target handset)
Once only press key, it Means paging all handsets.
To stop paging, press again.
2. To accept a page, press any key except or remove from the charger if
handset is docked.
3. To end the intercom, press key or place the handset back onto the Charger.
NOTE: Once paging from the base unit, a confirmed melody will sounds if the
base unit receives the response from the handset. If the melody does not sound, it
means that:
(1) The handset is off.
(2) The handset is out of communication range.
5. Intercom during a call
While you are using the base unit to make or answer an incoming call, there are 2
methods to page the handset and still keep your current telephone call.
1. If you want to talk to any handset, simply press the key only. It will
put the current telephone line on hold, play the hold music to the line, and the
base unit will begin paging all handsets. Any handset can answer the page.
2. If you would like to talk to a specific handset, follow these steps:
HOLD NN paging
( N N is the handset ID of target handset)
This operation will send the current telephone call on hold music, and the base
unit will page a specific handset ID N N . Only the handset with the unique ID
number N N will be paged.
3. During handset and base unit conversation, either the base unit or the handset
can resume conversation with the call on hold by pressing on the base unit,
or on the handset.
6. Transfer a phone
While you are using the base unit to make or answer an incoming call, there are two
methods to transfer the call over to other handsets.
15
MEMORY MEMORY Flash N (0~9)
N : flash time
0 : 80ms
1 :100ms
2 :200ms
3 :300ms
4 :400ms
MEMORY
5 :500ms
6 :600ms
7 :700ms
8 :800ms
9 :900ms
4. Set Ring Melody
MEMORY MEMORY or MEMORY
16
1. Transfer N N or Ϡ (N N is for a specific handset ID and Ϡ is for all handsets)
2. HOLD TRANSFER N N or Ϡ ( N N is for a specific handset ID and Ϡ is
for all handsets)
You can hear the transfer tone *Do, Mi, So for about 30 seconds. If there is no
answer from the target handset, you will hear feedback tones to alert you to receive
the call on hold again.
B. Setting
1. Ring volume
In standby mode, press ϧ orʳϰ to adjust ring volume. There are 8 steps can be
selected. The lowest level is mute.
2. Voice volume
In Intercom or speakerphone mode, press ϧ orʳϰʳto adjust the voice volume. There
are 7 steps can be selected.
3. Flash time setting
5. Set area code
MEMORY MEMORY 1 plus area code (max 3 digits)
6. Set plus code Country code
MEMORY MEMORY 2 plus country code (max 3 digits)
8. Register new handset
7. M/B ratio
1. Set the M/B ratio=40/60
2. Set the M/B ratio=33/66
MEMORY MEMORY 3
MEMORY MEMORY 4
MEMORY
MEMORY
MEMORY MEMORY 5 N N ( N N : New ID of handset) MEMORY
9. Set Tone dialing
10. Pulse dialing
MEMORY MEMORY 6
MEMORY
MEMORY MEMORY 7
MEMORY
MEMORY MEMORY 8
MEMORY
11. Set CID Type II ON
12. Set CID Type II OFF
MEMORY MEMORY 9
MEMORY
17
Pressing the key will place the current call on hold, and pick up the incoming call.
Pressing the key again will return you to the first call and place the second call
on hold.
G. Intercom:
1. Paging the base from the handset:
Press the key on the handset and then press BASE (left soft key) to
establish intercom.
When the receiving party’s voice is heard at the base, answer through the built
While talking on the phone, the key operates as a FLASH function as well.
18
Handset Operation and Function
A. Turn On/Off Handset:
1. You can power on the handset on by pressing and holding for 3 seconds.
2. You can power off the handset off by pressing and holding for 3 seconds.
B. Making a Telephone Call:
You can make an outgoing call in one of two ways.
1. Press , wait for dial tone, and then enter phone number.
2. Enter phone number first then press .
C. Answering incoming Calls:
On incoming calls, the ringer will ring or vibrate unless the ringer has been turned off.
1. If the handset is on charger cradle, lift the handset to pick up the incoming call.
2. If the handset is not on charger cradle, press any key to answer the incoming call
except .
3. If you do not take the incoming calls, the display will prompt you on how many calls
you have missed.
Note: While receiving incoming calls, you can mute the ring by pressing key.
D. Disconnecting calls:
You can end a call by pressing or by placing the handset onto the charger cradle.
E. Redial:
1. You can use the Up Arrow ( ) Key to scroll through the last 10 phone numbers dialed.
Select and press .
2. Press , then press OPTION Left soft Key redialing the last call.
F. Call waiting / Receiving a second call:
in microphone.
2. Paging the handset from the base:
Press the key to establish the intercom.
Press any key on the handset except to answer page.
3. Paging the handset from another handset:
This has to be done through the walkie-talkie mode. Please refer to the section.
Walkie-Talkie Between Handsets.
H. Walkie-Talkie between handsets:
1. Press the key followed by the 2 digit unique handset ID to establish contact.
2. The call in progress will be put on hold.
OPTION
OPTION
"CHANGING
3. You may press and release the PTT key at any time to establish contact with a
separate handset.
4. You can press the and then Ϡ key to communicate to all of the other
handsets.
5. The base unit can join the conversation with the 2 other handsets by pressing the
key. By pressing the key again cancels the group
OR press Ϡ key to transfer the phone call to any one of the handsets available.
Voice volume can only be adjusted DURING a call/
There are 6 levels to voice volume/
Use the up ( ) and down ( )
scroll keys to either increase or decrease the voice
To access the last 10 dialed numbers list; use the Up ( ) and down ( ) scroll keys, then:
volume.
conference.
6. During the group conference, the multi-Talk indicator on the base unit will be turned
on.
I. Transferring calls:
During a call in progress, press the (Left Option Key) first, then select TRANSFER
followed by:
Either the unique ID number of the target handset to transfer the call on hold to
OR press BASE (left soft key) to place the call on hold and be transferred to the base
unit
J. Voice Volume:
K. Changing Channel:
During a call in progress, you can press the ( Left Soft Key) and then
CHANNEL” key to change the radio channel to avoid radio interference.
Channel should be successfully changed with a sound of notification.
L. Last Ten Dialed Calls
1. Scroll through the list using the scroll keys and press the
key to select and
make the phone call.
2. OR press the SAVE (left soft key) to save the call.
19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225

EnGenius SN-358 PLUS Kullanım kılavuzu

Kategori
Telefonlar
Tip
Kullanım kılavuzu
Bu kılavuz için de uygundur