Yamaha DXS15mkII El kitabı

DXS15mkII
Yamaha
Marka
Yamaha
Modeli
DXS15mkII
Kategori
Tamamlayıcı müzik ekipmanı
Tip
El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

1
Introduction
Thank you very much for purchasing the DXS Powered Subwoofer. The DXS is a powered subwoofer used
for sound reinforcement and temporary installations. This owner’s manual explains how to set up and use
the subwoofer in live venues and temporary PA installations to enhance low-end sound. Be sure to read this
manual before using this subwoofer, in order to make sufficient use of the many functions that this product
offers. Also, be sure to keep this manual after you are finished reading it.
Features
High power, high sound pressure, superior low-end playback capabilities
Adopting a bandpass type enclusure for high sound pressure. The DXS features a high-resistance input,
low distortion woofer and a 1,020 W power amplifier to achieve superior low-end playback capability
and high sound pressure.
Flexible features
• D-XSUB: D-XSUB is a DSP technology that gives users additional dynamic control of the frequency
range to meet the demands of a variety of applications or musical styles.
• Selectable X-OVER (80/100/120 Hz): Selecting the cut-off frequency and LPF/HPF settings offers
users more flexibility to adapt to various applications.
• Cardioid mode: The Cardioid mode setting adds additional control of low frequencies for sub-woofer
arrays of two or more DXS speakers, effectively reducing the SPL of bass directed towards the stage
while increasing the bass levels directed towards the audience.
Reliability
A high-performance DSP control protects the speaker and amplifier. The DXS can be used worry-free,
even under harsh operating conditions.
Durability
The DXS’s sturdy plywood cabinet is covered with an extremely durable polyurea finish that provides
added protection from outside elements.
Fast and easy setup
M20 and Ø35 mm dual pole sockets allow for more flexible set up, while optional casters are also avail-
able for improved portability.
DXS18
DXS15 mkll
DXS12 mkll
POWERED SUBWOOFER
EN
ZZ20050
Owner’s Manual
• The DXS18 is mainly used for the explana-
tions in this manual.
• The illustrations as shown in this manual are
for instructional purposes only.
• The company names and product names used
in this manual are the trademarks or registered
trademarks of their respective companies.
Input the output signal from a source, such as a mixer, to the INPUT jack of the DXS, and input the output
signal from the OUTPUT jack of the DXS to the input jack of a full-range speaker.
• X-OVER switch (!2)
It is recommended that you match the crossover frequency (the cutoff frequency of the low pass filter)
of the DXS and the cutoff frequency of the high pass filter of the full-range speaker. The same fre-
quency range output from the DXS and the full-range speaker may cause interference with each other
and degrade the frequency characteristics.
• THROUGH/HPF POST switch (o)
If the full-range speaker is properly equipped with a high pass filter, you should set this to
[THROUGH]. The [THROUGH] setting enables you to control the level independently and minimize
signal delay. If the full-range speaker is not equipped with a high pass filter or the high pass filter in the
full-range speaker cannot be set to the same cutoff frequency as that of the low pass filter of the DXS,
set this to [HPF POST] to use the high pass filter in the DXS.
This is a pole socket used to mount a full-range speaker atop the DXS. The pole socket is compatible with
35 mm or M20 speaker poles, available commercially. When using the pole socket, be sure that the follow-
ing conditions are met.
Installing optional wheels SPW-1 at the back of the DXS enables you to transport the unit easily. To install
the wheels, use the screws already installed in the DXS unit.
Please do not use the speaker once the screws are removed. This causes air leaks to occur in enclosure,
resulting in undesirable performance.
* If any specific problem should persist, please contact your Yamaha dealer.
* The contents of this manual apply to the latest specifications as of the publishing date.
To obtain the latest manual, access the Yamaha website then download the manual file.
Basic Setup
CAUTION
If multiple powered speakers are connected in daisy-chain fashion, turn each device on
in sequence starting from the one nearest to the sound source, and turn them off start-
ing from the one farthest from the sound source.
Combination of monaural DXS and stereo full-range speakers
Combination of stereo DXS and stereo full-range speakers
NOTE
The L and R jacks are interchangeable; there is no difference in behavior between them.
Full-range
speaker
Combination and setting examples
Using the high pass filter in the
connected full-range speaker
Using the high pass filter in
the DXS
Full-range
speaker
DXS
o
!2
o
!2
From
mixer
From mixer
Full-range speaker Full-range speaker
Mixer
To full-range speaker
DXS
Full-range speaker Full-range speaker
Mixer
DXS DXS
From mixer
To full-range speaker
Installing a Speaker Pole
Subwoofer Top-mounted speaker Pole length
DXS18 Weight 28.0 kg or less, height 76 cm or less (DSR115) 120 cm or less
DXS15mkII Weight 19.3 kg or less, height 61 cm or less (DXR12) 100 cm or less
DXS12mkII
Weight 14.6 kg or less, height 51 cm or less (DXR10) 82 cm or less
Weight 13.5 kg or less, height 46 cm or less (DXR8) 90 cm or less
Installing Wheels
CAUTION
• For details on installing the wheels or special precautions you should take, please
refer to the relevant manual for the wheels.
• Do not install wheels other than the SPW-1.
Troubleshooting
Symptom Possible causes Possible solution
Power does not turn on.
The power cord is not con-
nected properly.
Connect the power cord properly.
Power suddenly turned
off.
The protection system has
been activated, shutting
down the power supply.
Turn off the power, wait until the amplifier cools down,
and then turn on again.
No sound.
The cable is not con-
nected properly.
Connect the cable to the INPUT jack properly.
Sound is interrupted
suddenly.
The protection circuit has
been activated, muting the
output.
Wait until the amplifier cools down. If the unit doesn’t
automatically reset itself, turn off the power, and then
on again.
Sound howls (feed-
back).
A microphone is directed
toward the speaker.
Keep the speaker away from the area where the
microphone picks up the sound.
The sound from each
speaker differs (if multi-
ple speakers are used.)
The settings for each
speaker differ.
Set each switch of each speaker to the same posi-
tion.
Sound is distorted.
Input volume is excessive.
Lower the volume of the input device so that the
PEAK indicator lights only occasionally.
Output volume is exces-
sive.
Lower the output level with the LEVEL control so that
the LIMIT indicator lights only occasionally.
General Specifications
General Specifications DXS18 DXS15mkII DXS12mkII
System Type Powered subwoofer, band-pass type
Frequency Range (-10 dB) 32 Hz–120 Hz 40 Hz–150 Hz 42 Hz–150 Hz
Measured Maximum SPL (Peak)
Pink Noise @1m
136 dB SPL 135 dB SPL 134 dB SPL
Power
Amplifier
Power
Rating
Dynamic 1,020 W
Continuous 800 W
Power Consumption
(1/8 output power)
100 W
Components LF
18" cone,
4" voice coil
15" cone,
2.5" voice coil
12" cone,
2.5" voice coil
Dimensions
(W × H × D; including rubber feet)
563 × 683 × 721 mm 480 × 611 × 614 mm 400 × 567 × 570 mm
Weight 49.7 kg 36.0 kg 30.0 kg
Handles Steel, side × 2
Pole Sockets (top surface) Ø35 mm (depth: 80 mm), M20 (threaded depth: 25 mm)
Connectors
Input XLR3-31 × 2
Output XLR3-32 × 2 (THROUGH or HPF POST)
Power IEC AC inlet × 1 (V-Lock)
Input Sensitivity (LEVEL: center) +10 dBu
Maximum Input Level +24 dBu
M20 screwØ35
q Pole sockets
Adapts to commercially available speaker poles of 35 mm diameter and
M20 screws. For details on installing speaker poles, refer to “Installing
a Speaker Pole.”
w Feet cups
When stacking multiple DXS units, align the rubber feet of the upper
DXS unit to the feet cups of the lower.
e Front LED
Turns on when the power is on. Lights more brightly when the output
limiter is active. Using FRONT LED DISABLE switch (!9) allows you
to defeat the front LED altogether.
r Wheel mounting holes
Optional SPW-1 wheels can be installed at these locations. For details
on installing the wheels or special precautions you should take, please
refer to the relevant manual for the wheels.
t AC IN inlet (V-Lock)
Connect the AC power cord included with the unit. The AC power cord
includes a locking mechanism with a latch. First connect the DXS to the
AC power cord, and then connect the power cord to the AC outlet.
When removing the cord, push the latch while pulling the cord out.
y Power switch
Turns the power to the unit on ( ) or off ( ).
If you are using multiple units, turn on the power to each unit one by
one. If you turn on the power to multiple units simultaneously, a tempo-
rary drop in the power voltage may occur, possibly resulting in abnor-
mal operation of the units.
Also, rapidly turning the unit on and off in succession can cause it to
malfunction. After turning the unit off, wait for about 5 seconds before
turning it on again.
u INPUT jacks
These are balanced input XLR jacks (line-level), and this device outputs
the mixed signals of L and R.
i OUTPUT jacks
These are balanced output XLR jacks for connecting full-range speak-
ers or additional DXS units. The output signal can be switched via the
THROUGH/HPF POST switch (o).
L/R output from the OUTPUT jacks correspond to L/R input to the
INPUT jacks. The mixed signal of L/R is not output.
o THROUGH/HPF POST switch
Switches the signals output from the OUTPUT jacks (i).
• THROUGH: Outputs unaffected signals from INPUT jacks (u).
Select when using HPF of the connected speaker or connecting addi-
tional DXS units.
• HPF POST: Outputs signal input from INPUT jacks (u) after pass-
ing through a HPF. The cutoff frequency of the high pass filter is the
frequency specified with the X-OVER switch (!2). Because the out-
put level from the OUTPUT jacks is linked to the LEVEL control
(!1), the levels of this unit and the full-range speaker change simulta-
neously.
!0 PEAK indicator
Lights red when the input level reaches 3 dB below clipping. If the indi-
cator lights frequently, adjust the volume of the input source or lower
the LEVEL control (!1) so that the indicator flashes only briefly at the
highest input levels.
!1 LEVEL control
Adjusts the output level.
!2 X-OVER switch
Specifies the crossover frequency at 120 Hz, 100 Hz, or 80 Hz. The out-
put from the unit is processed through a low pass filter to cut the range
of the selected frequency or higher. When setting THROUGH/HPF
POST switch (o) to [HPF POST], the output signals from the OUT-
PUT jacks are processed through a high pass filter to cut the range of
the selected frequency or lower, and the crossover frequency is linked to
that of the connected speaker.
!3 D-XSUB switch
Switches the low-range frequency response characteristics.
• NORMAL: A generic setting corresponding to various applications.
• BOOST: Boosts the frequency range enhancing and providing punch
to the sound.
• XTD LF (eXTenDed LF): Extends the bottom of the low frequency
range.
!4 CARDIOID switch
Connection of multiple DXS units enables the use of Cardioid mode.
For details on Cardioid mode and using the switch, refer to “Setup of
Cardioid Mode” on the opposite page.
!5 POLARITY switch
Switches the polarity of the unit, normal or inverted. When the polarity
is inverted, the INVRT indicator lights.
In most cases, this should be set to normal; however, the inverted setting
may improve low-range response, depending on the type and location of
the speaker system. Select a setting that produces the best low-end
sound.
!6 LIMIT indicator
Lights when the output limiter is active. The output limiter operates in
order to protect the speaker and amplifier, attenuating the output signal
to the amplifier. If the indicator lights frequently, adjust the volume of
the input source or lower the LEVEL control (!1) so that the indicator
only occasionally lights at the highest input levels.
!7 PROTECTION indicator
Lights when the protection system is active. The protection system
operates and the speaker output is muted in the following situations.
• If amplifier overheating is detected.
• If overcurrent is detected.
• Immediately after turning the power on. (The protection system is
activated to prevent noise and the indicator lights for about two sec-
onds. The indicator turns off when the power supply has started nor-
mally.)
!8 POWER indicator
Lights when the power is on.
!9 FRONT LED DISABLE switch
Turns the FRONT LED at the front of the unit on or off. The LED lights
when this switch is set to off. Turn this switch on to disable the LED.
Controls and functions
t y
q
r
u
o
!0
!1
!2 !3 !4
!5
!6
!7
!8
!9
i
w
e
CAUTION
Do not stack more than two DXS units.
CAUTION
Turn off the power before you connect or discon-
nect the power cord.
CAUTION
A slight electrical current will flow even when the
power switch is turned off. Make sure to unplug
the power cord from the power outlet when not
using the speaker for an extended period of time.
CAUTION
Make sure to lower the input level when switching.
Included accessories
• AC power cord
• Owner’s manual (this leaflet)
• Technical Specifications
Optional accessories
• Speaker cover: SPCVR-18S01 (for DXS18), SPCVR-DXS152 (for DXS15mkII), SPCVR-DXS122 (for DXS12mkII)
• Wheels: SPW-1; 4 pieces
2
Because directivity in the low frequency range is weak, the output sound from the subwoofer diffracts not
only toward the audience but also to the stage in almost the same sound pressure. By using the Cardioid
mode, bass to the audience is summed up and bass to the stage is canceled. This suppresses the bass volume
on the stage, providing a greater allowance before howling, and provides more powerful bass for the audi-
ence.
Place the two DXS units facing in opposite directions. Set the CARDIOID switch of the DXS facing the
audience to off, and that of the DXS facing the stage to on. Make sure that the other settings (LEVEL,
POLARITY, X-OVER) of the units are set the same.
You can also construct a system for Cardioid mode by vertically stacking two units. Set the CARDIOID
switch of the DXS facing to the stage side to on. Make sure that the other settings (LEVEL, POLARITY, X-
OVER) of the units are set the same.
Set the CARDIOID switch of only the DXS unit facing the stage to on. Set the levels of the two DXS units
facing the audience to the same. Set the level of the DXS unit facing to the stage approximately 6 dB greater
than the DXS units facing the audience.
About Cardioid mode
The distance between a speaker (A) facing to the audience sound source speaker and another speaker (B)
facing to the stage is defined as d. A delay is applied to the sound from speaker B, equivalent to distance d.
The sound of each speaker is cancelled on the stage
side and summed together on the audience side. The
directional characteristics of this combination are
represented in the polar pattern illustration at right.
Since the form resembles a heart shape, it is called
Cardioid mode.
Setup of Cardioid Mode
NOTE
• Use the same model and input signal for the DXS. You can also use the units connected in daisy chain
fashion with setting the OUTPUT jack to [THROUGH].
• To obtain the optimum Cardioid characteristics, locate the cabinet away from walls by more than 1.2 m.
Two-unit, side-by-side placement
Two-unit, vertically stacked placement
CAUTION
• When vertically stacking DXS units, make sure they are stable and not in danger of
falling over.
• Align the rubber feet of the upper DXS unit to the feet cups of the lower DXS.
• When using vertically stacked DXS units, do not place any objects (such as full-range
speakers or another DXS) on top of them or insert speaker poles.
To AC outlet
From mixer
To right
DXS
From left
DXS
To full-range
speaker
*1
*2
Off On
*1 When a full-range speaker is connected subse-
quently.
*2 When a full-range speaker is connected subse-
quently and the high pass filter in the full-range
speaker is not used, set this to [HPF POST].
To full-range speaker
Stage
From mixer
Audience
To full-range speaker
To AC outlet
From mixer
Stage
Audience
From lower
DXS
To full-range
speaker
*1
From mixer
To upper
DXS
Off
On
*1 When a full-range speaker is connected subsequently.
*2 When a full-range speaker is connected subsequently and
the high pass filter in the full-range speaker is not used, set
this to [HPF POST].
*2
Three-unit, side-by-side placement
From mixer
To center
DXS
Off Off
From center
DXS
From mixer
Stage
To AC outlet
Audience
From left
DXS
To right
DXS
On
d
d
A
B
Reverse
polarity
delay
Waveform
from A
Waveform
from B
Sound is
cancelled
Sound is summed
* This is the optimum state,
in which the distance d is a
quarter of the wavelength.
Stage
side
Audience
side
Reverse
polarity
delay
Audience side
Stage side
Stage
side
Audience
side
Directional characteristics
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place for future
reference.
WARNING
Always follow the basic precautions listed below
to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting,
damages, fire or other hazards. These precautions
include, but are not limited to, the following:
• Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip
over, or roll anything over it.
• Only use the voltage specified as correct for the device.
The required voltage is printed on the name plate of the
device.
• Use only the supplied power cord/plug.
If you intend to use the device in an area other than in the
one you purchased, the included power cord may not be
compatible. Please check with your Yamaha dealer.
• Check the electric plug periodically and remove any dirt
or dust which may have accumulated on it.
• When setting up the device, make sure that the AC outlet
you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power switch
and disconnect the plug from the outlet. Even when the
power switch is turned off, as long as the power cord is
not unplugged from the wall AC outlet, the device will not
be disconnected from the power source.
•
•
Remove the electric plug from the outlet when the
device is not to be used for extended periods of time, or
during electrical storms.
Be sure to connect to an appropriate outlet with a
protective grounding connection. Improper grounding
can result in electrical shock, fire, or damage.
Do not open
• This device contains no user-serviceable parts. Do not
open the device or attempt to disassemble the internal
parts or modify them in any way. If it should appear to be
malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Water warning
• Do not expose the device to rain, use it near water or in
damp or wet conditions, or place on it any containers
(such as vases, bottles or glasses) containing liquids
which might spill into any openings. If any liquid such as
water seeps into the device, turn off the power
immediately and unplug the power cord from the AC
outlet. Then have the device inspected by qualified
Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
Hearing loss
• Do not use the device for a long period of time at a high or
uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
• Before connecting the device to other devices, turn off the
power for all devices. Also, before turning the power of all
devices on or off, make sure that all volume levels are set
to the minimum. Failing to do so may result in hearing
loss, electric shock, or device damage.
• When turning on the AC power in your audio system,
always turn on the device LAST, to avoid hearing loss and
speaker damage. When turning the power off, the device
should be turned off FIRST for the same reason.
Fire warning
• Do not place any burning items or open flames near the
device, since they may cause a fire.
If you notice any abnormality
• If any of the following problems occur, immediately turn
off the power switch and disconnect the electric plug from
the outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object has been dropped into the device.
- There is a sudden loss of sound during use of the
device.
- Cracks or other visible damage appear on the device.
Then have the device inspected or repaired by qualified
Yamaha service personnel.
• If this device should be dropped or damaged,
immediately turn off the power switch, disconnect the
electric plug from the outlet, and have the device
inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below
to avoid the possibility of physical injury to you or
others, or damage to the device or other property.
These precautions include, but are not limited to,
the following:
Power supply/power cord
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
Location
• Do not place the device in an unstable position where it
might accidentally fall over and cause injuries.
• When installing the device:
- Make sure the top surface faces up; do not install on its
sides or upside down.
- Do not use the device in a confined, poorly-ventilated
location.
Inadequate ventilation can result in overheating, possibly
causing damage to the device(s), or even fire. Make sure
that there is adequate space around the device: at least
30 cm above, 30 cm at the sides and 30 cm behind.
• Do not use the speaker’s handles for suspended
installation. Doing so can result in damage or injury.
• Do not hold the bottom of the device when transporting or
moving it. In doing so, you may pinch your hands under
the device, and result in injury.
• Do not press the rear panel of the device against the wall.
Doing so may cause the plug to come in contact with the
wall and detach from the power cord, resulting in short
circuiting, malfunction, or even fire.
• Do not place the device in a location where it may come
into contact with corrosive gases or salt air. Doing so may
result in malfunction.
• Avoid being near the device during a disaster, such as an
earthquake. Since the device may turn over or fall and
cause injury, stay away from the device quickly and move
to a safe place.
• Before moving the device, remove all connected cables.
• When transporting or moving the device, always use three
or more people. Attempting to pick this unit up with only
one or two people may result in lower back injuries, or the
equipment may be dropped and damaged, resulting in
injury.
• Be sure to adhere to the conditions for “Installing a
Speaker Pole” when mounting the speaker on top using
the pole socket.
Tipping this unit over may break the unit, cause damage
to the internal parts or result in personal injury.
Maintenance
• Remove the power plug from the AC outlet when cleaning
the device.
Handling caution
• Do not insert your fingers or hands in any gaps or
openings on the device (ports).
• Avoid inserting or dropping foreign objects (paper,
plastic, metal, etc.) into any gaps or openings on the
device (ports). If this happens, immediately turn off the
power unplug the power cord from the AC outlet, and
have the device inspected by qualified Yamaha service
personnel.
• Do not operate the device if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
• Avoid pulling the connected cables to prevent injuries or
damage to the device by causing it to fall.
PA_en_8
Yamaha cannot be held responsible for damage caused
by improper use or modifications to the device.
NOTICE
To avoid the possibility of malfunction/damage to the product, or damage to other property, follow the notices below.
Handling and maintenance
• Do not use the device in the vicinity of a TV, radio, AV equipment, mobile phone, or other electric devices. Otherwise, the
device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater,
or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the
internal components.
• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved
from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is
present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for sev-
eral hours without turning on the power until the condensation has completely dried out.
• When placing the speaker face down, always place it on a flat surface.
• Do not touch the speaker driver unit.
• Air blowing out of the ports is normal.
• Always turn the power off when the device is not in use.
Connectors
• XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (–).
Information
About this manual
• The illustrations as shown in this manual are for instructional purposes only.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
About disposal
• This product contains recyclable components. When disposing of this product, please contact the appropriate local
authorities.
Manual Development Group
© 2017 Yamaha Corporation
Published 05/2018 YJMAW-B0
Yamaha Pro Audio global website:
https://www.yamaha.com/proaudio/
Yamaha Downloads:
https://download.yamaha.com/
이 기기는 가정용(B급) 전자파적합기기로서 주로 가
정에서 사용하는 것을 목적으로 하며, 모든 지역에서
사용할 수 있습니다.
(class b korea)
In Finland: Laite on liitettävä suojamaadoituskosketti-
milla varustettuun pistorasiaan.
In Norway: Apparatet må tilkoples jordet stikkontakt.
In Sweden: Apparaten skall anslutas till jordat uttag.
(class I hokuo)
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « ten-
sion dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instruc-
tions importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.
IMPORTANT SAFETY INSTRUC-
TIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the man-
ufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the manu-
facturer, or sold with the apparatus. When
a cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servic-
ing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
(UL60065_03)
PRÉCAUTIONS CONCERNANT
LA SÉCURITÉ
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser ce produit à proximité d’eau.
6 Nettoyer uniquement avec un chiffon propre et sec.
7 Ne pas bloquer les orifices de ventilation. Installer l’appa-
reil conformément aux instructions du fabricant.
8 Ne pas installer l’appareil à proximité d’une source de
chaleur comme un radiateur, une bouche de chaleur, un
poêle ou tout autre appareil (y compris un amplificateur)
produisant de la chaleur.
9 Ne pas modifier le système de sécurité de la fiche polari-
sée ou de la fiche de terre. Une fiche polarisée dispose de
deux broches dont une est plus large que l’autre. Une
fiche de terre dispose de deux broches et d’une troisième
pour le raccordement à la terre. Cette broche plus large
ou cette troisième broche est destinée à assurer la sécur-
ité de l’utilisateur. Si la fiche équipant l’appareil n’est pas
compatible avec les prises de courant disponibles, faire
remplacer les prises par un électricien.
10 Acheminer les cordons d’alimentation de sorte qu’ils ne
soient pas piétinés ni coincés, en faisant tout spécialem-
ent attention aux fiches, prises de courant et au point de
sortie de l’appareil.
11 Utiliser exclusivement les fixations et accessoires spécif-
iés par le fabricant.
12 Utiliser exclusivement le chariot, le stand,
le trépied, le support ou la table recom-
mandés par le fabricant ou vendus avec
cet appareil. Si l’appareil est posé sur un
chariot, déplacer le chariot avec précau-
tion pour éviter tout risque de chute et de blessure.
13 Débrancher l’appareil en cas d’orage ou lorsqu’il doit res-
ter hors service pendant une période prolongée.
14 Confier toute réparation à un personnel qualifié. Faire
réparer l’appareil s’il a subi tout dommage, par exemple
si la fiche ou le cordon d’alimentation est endommagé, si
du liquide a coulé ou des objets sont tombés à l’intérieur
de l’appareil, si l’appareil a été exposé à la pluie ou à de
l’humidité, si l’appareil ne fonctionne pas normalement
ou est tombé.
(UL60065_03)
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The above warnin
g
is located on the rear of the unit. L’avertissement ci-dessus est situé sur l’arrière de l’unité.
ATTENTION
RISQUE DE CHOC
ELECTRIQUE-NE PAS OUVRIR
ATTENTION :
POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER
LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT
L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,
FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE.
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE
DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPA-
REIL À LA PLUIE OU À L’HUMIDITÉ.
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifica-
tions not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
3.
NOTE:
This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements pro-
vides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment gen-
erates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product
is found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America, Electronic Service
Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distrib-
uted by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
(weee_eu_en_02)
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in
accordance with your national legislation.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authori-
ties or dealer and ask for the correct method of disposal.
Power supply/power cord
  • Page 1 1
  • Page 2 2

Yamaha DXS15mkII El kitabı

DXS15mkII
Yamaha
Marka
Yamaha
Modeli
DXS15mkII
Kategori
Tamamlayıcı müzik ekipmanı
Tip
El kitabı
Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:
PDF''yi indir
rapor

diğer dillerde

İlgili makaleler

Diğer belgeler