Avent SCD841 Kullanım kılavuzu

SCD841

SCD843

SCD845

SCD630

1

2

3

4

5

6

15

16

14

13

7

10 11 1298

19

18

20

21

22

25

23

27

26

28

31

30

17

29

24

English 6

Dansk 34

Deutsch 63

Español 93

Français 123

Italiano 153

Nederlands 183

Norsk 213

Português 242

Suomi 272

Svenska 300

Türkçe 328

ﺔﻴﺑﺮﻌﻟﺍ

356

English

Introduction

Congratulations on your purchase and welcome to Philips Avent! To fully

benefit from the support that Philips Avent offers, register your product at

www.philips.com/welcome.

The Philips Avent video babymonitor provides you with round-the-clock

support and it allows you to see your baby day and night from anywhere in

the house. The latest digital technology guarantees clear sound and the

clearest image of your baby. This gives you an additional sense of security

without entering your baby’s room and disturbing its sleep.

General description

1 Parent unit

2 Sound level lights

3 Display

4 ECO light

5 Battery status light

6 Link light

7 Speaker

8 Control button (menu navigation/volume/brightness)

9 Menu button

10 Lullaby button

11 Talk-back button

12 Microphone

13 Socket for power adapter

14 Mode button

15 On/off button

16 Antenna

17 Belt clip

18 Baby unit

19 Camera

20 Power on light

21 Lullaby on/off button

22 Nightlight

23 Microphone

24 Nightlight on/off button

25 On/off slide

26 Antenna

27 Speaker

28 Socket for small plug

29 Temperature sensor

30 Wall mounting holes

31 Adapter(2x)

Important safety information

Read this important information carefully before you use the appliance and

save it for future reference.

6

English

IMPORTANT

This baby monitor is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be used as such.

Never leave your baby alone in your home. Always make sure there is

someone present to look after the baby and take care of its needs.

Disclaimer

Please note that you use this baby monitor at your own risk. Koninklijke

Philips N.V. and its subsidiary companies are not responsible for the

operation of this baby monitor or your use of it and therefore do not accept

any liability in connection with your use of this baby monitor.

Danger

-

Never immerse any part of the baby monitor in water or any other liquid.

Do not place the appliance where water or any other liquid can drip or

splash onto it. Never use the baby monitor in moist places or close to

water.

-

Never put any object on top of the baby monitor and do not cover it. Do

not block any ventilation openings. Install according to the

manufacturer’s instructions.

-

Cords present a potential strangulation hazard. Keep cords out of the

reach of children (more than 1 meter/3.5 feet away). Never place the baby

monitor inside the baby’s bed or playpen.

Warning

-

Check if the voltage indicated on the adapter corresponds to the local

mains voltage before you connect the appliance.

-

Do not modify or cut off any part of the adapter and its cord, as this

causes a hazardous situation.

-

Only use the adapter supplied.

-

If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

-

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

-

Protect the mains cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

appliance.

7

English

-

Make sure that you place the baby monitor in such a way that its cord

does not obstruct a doorway or passage. If you place the baby monitor

on a table or low cabinet, do not let the mains cord hang over the edge

of the table or cabinet. Make sure the cord does not lie on the floor

where it presents a tripping hazard.

-

Keep the packaging materials (plastic bags, cardboard buffers, etc.) out of

the reach of children, as they are not a toy.

-

To prevent electric shock, do not open the housing of the baby unit or

parent unit.

Caution

-

Use the appliance at a temperature between 0°C (32°F) and 40°C (104°F).

-

Do not install the appliance near any heat sources such as radiators, heat

registers, stoves or other apparatus (including amplifiers) that produce

heat.

-

Make sure that your hands are dry when you handle adapters, plugs and

the mains cord.

-

All required markings on the baby unit, parent unitand power adapter

are located on the bottom of the baby unit, parent unit and power

adapter.

Compliance with standards

-

This product complies with the radio interference requirements of the

European Community.

-

Philips Consumer Lifestyle hereby declares that this baby monitor is in

compliance with the essential requirements and other relevant provisions

of Directive 2014/53/EU (FHSS: frequency band 2.4GHz, maximum radio-

frequency power: 100 mW EIRP). A copy of the EC Declaration of

Conformity (DoC) is available online at www.philips.com/support.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic fields.

8

English

Preparing for use

Baby unit

Put the power adapter in the baby unit and the adapter in the wall socket.

Parent unit

The parent unit runs ona built-in rechargeable Li-ion battery.

Follow the below steps to charge the parent unit:

1 Put the power adapter in the parent unit and put the adapter in the wall

socket.

-

The battery status light turns orange to indicate that the appliance is

charging.

20°CEco

1

-

When the battery is fully charged, the battery status light turns green

continuously.

10 hrs=3 hrs

-

When you charge the parent unit for 3 hours, it can be used cordlessly for

approx. 10 hours.

-

If the parent unit is switched on during charging, charging takes

approximately twice as long.

9

English

20°CEco

1

-

When the rechargeable battery of the parent unit is almost empty, the

battery status light turnsred and the parent unit beeps.

-

If the battery is completely empty and the parent unit it not connected to

the mains, the parent unit automatically switches off and loses contact

with the baby unit.

Note: The built in rechargeable battery cannot be removed from the

product.

Note: The battery gradually and very slowly discharges, even when the

parent unit is switched off.

Tip: To save battery, switch off the parent unit when you do not use it.

Note: We advise you to keep the parent unit connected to the mains during

the whole night. If the battery of the parent unit runs low during the night,

the parent unit beeps and this may wake you up.

Using the baby monitor

Linking parent unit and baby unit

1 Push the on/off slide on the baby unit upwards to the ON position.

2 When the baby unit is on, the power-on light on the baby unit lights up

green.

Note: The power-on light on the baby unit always lights up green, even

when there is no connection with the parent unit.

>2.5m/8.2ft

3 Make sure that the parent unit and the baby unit are at least 2.5 meters/

8.2 feet away from each otherto avoid acoustic feedback.

10

English

4 Press the on/off button on the parent unit to switch on the parent unit.

20°CEco

1

-

The display goes on, the linking image appears on the display and the

link light lights up red. The parent unit starts to search for the baby unit.

20°CEco

1

-

When the parent unit and baby unit are linked, the link light lights up

green on the parent unit and one or more bars appear on the display.

20°CEco

1

Note: It takes less than 10 seconds to establish the link between the

parent unit and the baby unit.

-

When thebaby unit is turned off, the parent unit will show the out of

range image. Make sure that the baby unit is switched on.

-

If no connection has been established, the link light turns red, the parent

unit beeps three short beeps every 20 seconds and the out-of-range

image appears on the display.

Positioning the baby monitor

Warning: The cord of the baby unit presents a potential

strangulation hazard. Make sure that the baby unit and its cord

are at least 1 meter / 3.5 feet away from your baby. Never place

the baby monitor inside the baby’s bed or playpen.

11

English

>

1-1.5m/3.5-5ft

1 For optimal sound detection, make sure that the baby unit is no further

than 1.5 meter/ 5 feet away from the baby. Make sure that the baby unit

is at least 1 meter/ 3.5 feet away from the baby because of potential

strangulation hazard.

>2.5m/8.2ft

2 Place the parent unit within the operating range of the baby unit. Make

sure it is at least 2.5 meters / 8.2 feet away from the baby unit to avoid

acoustic feedback.

Note: If you use a cordless phone, wireless video, Wi-Fi network,

microwave oven or Bluetooth on 2.4GHz and you experience

interference on either the parent unit or baby unit, move the parent unit

until there is no more interference.

3 There are two ways to position the baby unit:

a Place the baby unit on a stable, level and horizontal surface.

b Mount the baby unit to the wall with screws.

Tip: The wall mount template (see 'Wall mount') to mount the baby unit

to the wall can be found at the end of this user manual.

Tip: Use the provided template to mark the exact location of the screw

holes on the wall.

Tip: Position the baby unit at a higher level to get a good overview of the

baby’s bed or playpen.

Adjust the baby unit in a way that ensures the best visibility of your baby.

The baby unit can be rotated to position it in the desired way.

12

English

Operating range

<50m/165ft

<300m/985ft

The operating range is up to 50 meters/ 165 feet indoors and 300

meters/985 feet outdoors. The operating range of the baby monitor varies

depending on the surroundings and factors that cause interference. Wet

and moist materials cause so much interference that the range loss is up to

100%.

Dry materials Material thickness Loss of range

Wood, plaster, cardboard, glass (without metal,

wires or lead)

< 30cm (12in) 0-10%

Brick, plywood < 30cm (12in) 5-35%

Reinforced concrete < 30cm (12in) 30-100%

Metal grilles or bars < 1cm (0.4in) 90-100%

Metal or aluminium sheets < 1cm (0.4in) 100%

Features and settings

Volume

You can adjust the speaker volume of the parent unit to the level you prefer.

1 Press the top or bottom part of the control button to adjust the volume.

20°C

1

Tip: Make sure that the volume is adapted to the current conditions.

Under noisy conditions, the vibration alert can be turned on as well.

The volume bar appears on the display to show the selected volume.

Note: If the volume is set to a high level, the parent unit consumes more

power.

Note: When the volume bar is at its minimum, the volume is muted. The

parent unit shows a mute icon in the status bar and you will only receive

alerts and video from the parent unit.

13

English

Brightness

You can adjust the display brightness of the parent unit to the level you

prefer.

1 Press the left or right part of the control button to adjust the brightness

of the display of the parent unit.

20°C

1

The brightness bar appears on the display to show the selected display

brightness.

Note: If the brightness is set to a high level, the parent unit consumes more

power.

Sound level lights

The parent unit continuously monitors the sound level in your baby’s room,

and the sound level lights on the parent unit let you know if there is any

sound picked up in the baby room.

20°C

1

VIDEO

As long as no sound is detected, the sound level lights are out.

20°C

1

VIDEO

When the baby unit picks up a sound, one or more sound level lights on the

parent unit light up green. The number of lights that go on depends on the

loudness of the sound picked up by the baby unit. The louder your baby

cries, more sound level lights light up green.

14

English

Modes

This baby monitor has four different modes that allows you to choose how

you want to look after your baby: VIDEO, AUDIO, VOX and ECO.

With the baby monitor on, you can switch between these 4 different modes

by pressing the mode button on the side of the parent unit.

The display shows the selected mode. The selected mode is also indicated

in the status bar. When turning on the device, the mode that was last used

will be active.

VIDEO mode

VID

EO

VIDEO

Press the mode button on the side of the parent unit to select theVIDEO

mode.

20°C

1

VIDEO

When the VIDEO mode is activated, the screen is always on, so you can see

your baby. All sounds are directly transmitted to the parent unit.

Note: Set the sensitivity level to 'very high' to have continuous sound on the

parent unit. Please see the Sensitivity level chapter for more information.

20°C

1

VOX

If your baby cries, the sound level lights light up green. As long as no sound

is detected, the sound level lights are off.

15

English

AUDIO mode

AUDI

O

AUDIO

1 Press the mode button on the side of the parent unit to switch to AUDIO

mode.

VOXAUDIO

When the AUDIO mode is activated, the display of the parent unit switches

off. After 3 seconds the display will completely turn off and the status bar

will disappear.

Note: The status bar is not visible when the display is off.

20°C

1

AUDIO

Note: The link light shows that the parent unit is still on and connected to

the baby unit.

Note: When sensitivity level is not set to 'very high', low sounds will be

muted.

Note: Set the sensitivity level to 'very high' to have continuous sound on the

parent unit. Please see the Sensitivity level chapter for more information.

All sounds are constantly transmitted to the parent unit. If your baby cries,

the display of the parent unit is still off, but the sound level lights light up

green and the sounds detected by thebaby unitare transmitted to the

parent unit. As long as no sound is detected, the sound level lights are off.

VOX mode

VOX

1 Press the mode button on the side of the parent unit to switch to VOX

mode.

Note: When the display is on, the selected mode is shown in the status bar.

The status baris not visible when the display is off.

VOX

20°C

1

VOX

When the VOX mode is activated, the display and sound of the parent unit

switch off, if there is no sound detected for 20 seconds.

16

English

20°C

1

VOX

Whensound is picked up by the baby unit, the displayand sound of the

parent unit switch on immediately.The sounds are transmitted to the parent

unit and the sound level lights light up green. As long as no sound is

detected, the sound level lights are off.

Note: The minimum sound level to activate sound and display is defined by

the sensitivity setting.

ECO mode

ECO

1 Press the mode button on the side of the parent unit to switch to ECO

mode.

Note: When the display is on, the selected mode will be visible in the

status bar. The status bar is not visible when the display is off.

ECO

When the ECO mode is activated the display and sound of the parent unit

switch off when no sound is detected for 20 seconds. TheECO light lights up

green to indicate that the ECO mode is activated. During ECO mode the

display and sound transmissions are turned off.

20°C

1

ECO

Whensound is picked up by the baby unit, the displayand sound of the

parent unit switch on immediately.The sounds are transmitted to the parent

unit and the sound level lights light up green. As long as no sound is

detected, the sound level lights are off.

Note: The minimum sound level to activate sound and display is defined by

the sensitivity setting.

Nightlight

1 Press the nightlight on/off button on the baby unit to switch on the

nightlight feature.

17

English

The nightlight of the baby unit goes on.

Note: It is not possible to control the nightlight from the parent unit. You

can only switch the nightlight on or off on the baby unit.

2 Press the nightlight on/off button again to switch off the nightlight.

Lullabies

You can activate the lullaby feature either from the parent unit or from the

baby unit.

To activate the lullaby feature from the parent unit, follow the instructions

below:

Lullaby selection

1 Press the lullaby button on the parent unit to open the menu for

lullabies.

Note: Pressing the lullaby button while the lullaby menu is already open,

will close the menu.

2 Press the right part of the control button to enter the list of lullabies

18

English

20°CVIDEO

1

Lullaby Songs

1 Rock-a-Bye Baby

2 Twinkle, Twinkle

3 Hush, Little Baby

4 Brahm’s Lullaby

5 Golden Slumbers

3 Press the top or bottom part of the control button to scroll through the

list of lullabies.

20°CVIDEO

1

Lullaby Songs

1 Rock-a-Bye Baby

2 Twinkle, Twinkle

3 Hush, Little Baby

4 Brahm’s Lullaby

5 Golden Slumbers

4 Press the right part of the control button to play a specific lullaby.

If you want to pause the lullaby, press the right side of the control button

again.

5 The status barof the parent unit shows the number of lullabies thatare

being played and repeated.

15 min

The lullaby starts to play on the baby unit and it is repeated continuously

for approximately 15 minutes.

Tip: To repeat all songs that are available, select the last option in the list.

20°C

1

Lullaby Songs

1 Rock-a-Bye Baby

2 Twinkle, Twinkle

3 Hush, Little Baby

4 Brahm’s Lullaby

5 Golden Slumbers

VIDEO

6 To select another lullaby, scroll up or down with thecontrol button to

select another song from the list.Press the right part of the control

button to start the selected song.

7 To stop the lullaby, press the lullaby button on the parent unit and pause

the song that is currently playing by pressing the right part of the control

button one more time.

Lullaby volume

20°C

1

Lullaby Volume

VIDEO

1 Press the lullaby button and then press the bottom of the control button

to select the volume options of thelullaby menu. Press the right part of

the control button to access the lullaby volume levels.

19

English

20°C

1

Lullaby Volume

VIDEO

2 Press the top or bottom part of the control button to adjust the volume.

To activate the lullaby feature from the baby unit, press the lullaby on/off

button on the baby unit.

15 min

The latest lullaby selected on the parent unit starts to play on the baby unit

and is repeated continuously for approximately 15 minutes.

To stop the lullaby on the baby unit, press the lullaby on/off button on the

baby unit.

Talk-back

You can use the talk-back button on the parent unit to talk to your baby.

1 Press and hold the talk-back button on the parent unit.

2 Talk clearly into the microphoneat the front of the parent unit from a

distance between 15-30cm /0.5-1ft.

As long as the talk-back button is pressed, there is an open sound

connection to the baby unit. The display of the parent unit shows the

talk-back icon, indicating the active connection.

3 Release the talk-back button when you have finished talking..

Note: As long as the talk-back button is pressed, theparent unitcannot

process sounds coming from the baby unit.

20

English

Sayfa yükleniyor...

Avent SCD841 Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Avent SCD841 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler