Makita UX01G Kullanım kılavuzu

Marka: Makita

Model: UX01G

Kategori: Elektrikli aletler

Tip: Kullanım kılavuzu

UX01G

EN Cordless Multi Function

Power Head INSTRUCTION MANUAL 6

FR Moteur Multi-Fonctions

Sans Fil MANUEL D’INSTRUCTIONS 18

DE Multifunktions-Antrieb BETRIEBSANLEITUNG 31

IT Testa motorizzata

multifunzione a batteria ISTRUZIONI PER L’USO 44

NL Multifunctioneel

accuaandrijfsysteem GEBRUIKSAANWIJZING 57

ES Herramienta Multifuncional

Inalámbrica

MANUAL DE

INSTRUCCIONES 70

FERRAMENTA

MULTIFUNCIONAL A BATERIA

MANUAL DE INSTRUÇÕES 83

DA 

motorhoved BRUGSANVISNING 96

EL 

  108

TR 

Akülü Kafa KULLANMA KILAVUZU 122

Fig.1

Fig.2

Fig.3

911

Fig.4

2 3

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.12

Fig.17

Fig.18

Fig.19

Fig.20

Fig.21

Fig.22

Fig.23

6ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: UX01G

No load speed

(without attachment)

Low 0 - 5,700 min-1

Medium 0 - 8,200 min-1

High 0 - 9,700 min-1

Overall length (without battery cartridge) 1,001 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 5.3 kg - 12.5 kg

Protection degree IPX4

 

without notice.

 

 -

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Type Battery cartridge

BL4020 BL4025 BL4040 BL4050F BL4080F

Brushcutter attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

String trimmer attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Rotary scissors attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Grass trimmer attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Hedge trimmer attachment Available Recom-

mended

Recom-

mended

Recom-

mended

Recom-

mended

Ground trimmer attachment Available Recom-

mended

Recom-

mended

Recom-

mended

Recom-

mended

Pole saw attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Cultivator attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Edger attachment Available Recom-

mended

Recom-

mended

Recom-

mended

Recom-

mended

 Available Available Recom-

mended

Recom-

mended

Recom-

mended

Power brush attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Power sweep attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Blower attachment Available Available Recom-

mended

Recom-

mended

Recom-

mended

Charger DC40RA / DC40RB / DC40RC

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges



7ENGLISH

Recommended cord connected power source

Portable power pack PDC01 / PDC1200

• The cord connected power source(s) listed above may not be available depending on your region of residence.

• Before using the cord connected power source, read instruction and cautionary markings on them.

No load speed with attachment

Model Rotation speed

Low Medium High

EM401MP 0 - 4,200 min-1 0 - 6,000 min-1 0 - 7,100 min-1

EM404MP / EM406MP 0 - 3,500 min-1 0 - 5,000 min-1 0 - 6,000 min-1

EM407MP Upper blade 0 - 220 min-1 0 - 310 min-1 0 - 370 min-1

Lower blade 0 - 470 min-1 0 - 670 min-1 0 - 790 min-1

EM408MP / EM409MP 0 - 4,200 min-1 0 - 6,000 min-1 0 - 7,100 min-1

EN401MP / EN410MP / EN420MP

(Strokes per minute)

0 - 2,400 min-1 0 - 3,400 min-1 0 - 4,000 min-1

EY401MP (chain speed) 0 - 12 m/s 0 - 17 m/s 0 - 20 m/s

EY403MP (chain speed) 0 - 11 m/s 0 - 16 m/s 0 - 19 m/s

KR400MP 0 - 160 min-1 0 - 230 min-1 0 - 280 min-1

KR401MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1

EE400MP 0 - 2,800 min-1 0 - 4,000 min-1 0 - 4,700 min-1

EJ400MP 0 - 1,600 min-1 0 - 2,300 min-1 0 - 2,800 min-1

BR400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1

SW400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1

UB400MP 0 - 5,650 min-1 0 - 7,800 min-1 0 - 9,450 min-1

UB401MP 0 - 5,650 min-1 0 - 7,800 min-1 0 - 9,450 min-1

Approved attachment

Type Model

Brushcutter attachment EM401MP / EM404MP

String trimmer attachment EM406MP

Rotary scissors attachment EM407MP

Grass trimmer attachment EM408MP / EM409MP

Hedge trimmer attachment EN401MP / EN410MP

Ground trimmer attachment EN420MP

Pole saw attachment EY401MP / EY403MP

Cultivator attachment KR400MP / KR401MP

Edger attachment EE400MP

 EJ400MP

Shaft extension attachment LE400MP

Power brush attachment BR400MP

Power sweep attachment SW400MP

Blower attachment UB400MP / UB401MP

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Take particular care and attention.

Do not expose to moisture.

8ENGLISH

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive on

waste electrical and electronic equipment and on

accumulators and batteries and waste accumu-

lators and batteries, as well as their adaptation to

national law, waste electrical equipment, batteries

and accumulators should be stored separately

and delivered to a separate collection point for

municipal waste, operating in accordance with the

regulations on environmental protection.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

This cordless multi function power head is intended for

driving an approved attachment listed in the section

"SPECIFICATIONS" of this instruction manual. Never

use the unit for the other purpose.

WARNING: Read the instruction manual of

the attachment as well as this instruction manual

before using. Failure to follow the warnings and



Noise

Attachment Sound pressure level

average

Sound power level

average

Applicable

standard

LpA (dB (A))

Uncertainty

K (dB (A))

LWA (dB (A))

Uncertainty

K (dB (A))

EM401MP (as a brushcutter) 79.8 1.2 94.8 2.5

ISO22868

(ISO11806-1)

EM401MP (as a string trimmer) Nylon cutting head 80.1 1.0 94.3 2.0

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 79.4 1.0 91.4 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

EM404MP (as a brushcutter) 79.4 1.4 92.0 1.0

ISO22868

(ISO11806-1)

EM404MP (as a string trimmer) Nylon cutting head 80.7 1.3 91.9 1.4

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 78.6 0.7 87.8 0.4

ISO22868

(ISO11806-1)/

EN50636-2-91

EM406MP Nylon cutting head 81.3 0.6 93.4 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 78.8 0.4 87.9 0.6

ISO22868

(ISO11806-1)/

EN50636-2-91

EM407MP 84.7 1.7 99.0 1.3

ISO22868

(ISO11806-1)

EM408MP Metal blade 80.7 1.7 94.7 3.0

ISO22868

(ISO11806-1)

Nylon cutting head 79.5 1.3 92.8 2.7

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 80.5 1.1 92.2 2.8

ISO22868

(ISO11806-1)/

EN50636-2-91

EM409MP Nylon cutting head 80.6 1.2 93.4 2.3

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 81.0 1.4 91.9 2.4

ISO22868

(ISO11806-1)/

EN50636-2-91

EN401MP 84 395 3

EN62841-4-2

EN401MP + LE400MP 85 396 3

EN62841-4-2

9ENGLISH

Attachment Sound pressure level

average

Sound power level

average

Applicable

standard

LpA (dB (A))

Uncertainty

K (dB (A))

LWA (dB (A))

Uncertainty

K (dB (A))

EN410MP 80 391 3

EN62841-4-2

EN410MP + LE400MP 80 391 3

EN62841-4-2

EN420MP 83 394 3

EN62841-4-2

EY401MP 94 3103 3

ISO22868

(ISO11680-1)

EY401MP + LE400MP 85 3103 3

ISO22868

(ISO11680-1)

EY403MP 95 3102 3

ISO22868

(ISO11680-1)

EY403MP+LE400MP 95 3102 3

ISO22868

(ISO11680-1)

KR400MP 77.8 0.7 86.6 1.2 EN709

KR401MP 77.7 0.3 86.7 2.0 EN709

EE400MP 76.1 1.7 88.2 2.3 ISO11789 /

2000/14/EC

EJ400MP 82.9 0.6 94.4 1.5

ISO22868

(ISO11806-1)

EJ400MP + LE400MP 79.7 1.4 94.0 0.7

ISO22868

(ISO11806-1)

BR400MP 80.2 1.0 88.9 0.8

EN60335-2-72

SW400MP 80.3 0.2 88.3 0.6

EN60335-2-72

UB400MP 92.1 1.6 104.1 1.3

EN50636-2-100

UB401MP 85.6 2.1 97.1 1.0

EN50636-2-100

• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB

(A). Wear ear protection.

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: -

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the



Vibration

Attachment Left handle (Front grip)

Right handle (Rear grip)

Applicable

standard

ah (m/s2)

Uncertainty

K (m/s2)

ah (m/s2)

Uncertainty

K (m/s2)

EM401MP (as a brushcutter) 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM401MP (as a string trimmer) Nylon cutting head 3.7 1.5 3.0 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM404MP (as a brushcutter) 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM404MP (as a string trimmer) Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

10 ENGLISH

Attachment Left handle (Front grip)

Right handle (Rear grip)

Applicable

standard

ah (m/s2)

Uncertainty

K (m/s2)

ah (m/s2)

Uncertainty

K (m/s2)

EM406MP Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM407MP 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM408MP Metal blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EM409MP Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11806-1)

EN401MP 3.4 1.5 2.5 or less 1.5

EN62841-4-2

EN401MP + LE400MP 5.4 1.5 2.7 1.5

EN62841-4-2

EN410MP 2.8 1.5 2.5 or less 1.5

EN62841-4-2

EN410MP + LE400MP 4.4 1.5 2.5 or less 1.5

EN62841-4-2

EN420MP 2.9 1.5 2.5 or less 1.5

EN62841-4-2

EY401MP 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11680-1)

EY401MP + LE400MP 2.5 or less 1.5 2.5 or less 1.5

ISO22867

(ISO11680-1)

EY403MP 4.0 1.5 2.5 or less 1.5

ISO22867

(ISO11680-1)

EY403MP+LE400MP 3.2 1.5 2.5 or less 1.5

ISO22867

(ISO11680-1)

KR400MP 2.5 or less 1.5 2.5 or less 1.5 EN709

KR401MP 2.5 or less 1.5 2.5 or less 1.5 EN709

EE400MP 2.5 or less 1.5 2.5 or less 1.5 ISO11789

EJ400MP 3.5 1.5 3.9 1.5

ISO22867

(ISO11806-1)

EJ400MP + LE400MP 4.8 1.5 2.6 1.5

ISO22867

(ISO11806-1)

BR400MP 2.5 or less 1.5 2.5 or less 1.5

EN60335-2-72

SW400MP 2.5 1.5 2.5 or less 1.5

EN60335-2-72

UB400MP 4.6 1.5 2.5 or less 2.5

EN50636-2-100

UB401MP 2.5 or less 1.7 2.5 or less 1.5

EN50636-2-100

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

WARNING: 

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

11 ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-



with this power tool. Failure to follow all instructions





Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Additional safety instructions

Personal protective equipment

Fig.1

1. Wear safety helmet, protective goggles and

protective gloves to protect yourself from



2. -

vent hearing loss.

3. Wear proper clothing and shoes for safe

operation, such as a work overall and sturdy,

non-slip shoes. Do not wear loose clothing or

jewelry.

caught in moving parts.

When touching the cutting blade, wear protective

gloves. Cutting blades can cut bare hands severely.

Work area safety

1. Before operation, examine the work area for

stones or other solid objects. They can be

thrown or cause dangerous kickback and result in



Electrical and battery safety

1. Avoid dangerous environment. Don't use the

tool in dump or wet locations or expose it to

rain. Water entering the tool will increase the risk

of electric shock.

2. 

The cell may explode. Check with local codes for

possible special disposal instructions.

Do not open or mutilate the battery(ies). Released

electrolyte is corrosive and may cause damage to

the eyes or skin. It may be toxic if swallowed.

Do not charge battery in rain, or in wet locations.

5. Do not replace the battery with wet hands.

6. Do not replace the battery in the rain.

7. Do not wet the terminal of battery with liquid

such as water, or submerge the battery. Do not

leave the battery in the rain, nor charge, use,

or store the battery in a damp or wet place. If

the terminal gets wet or liquid enters inside of bat-

tery, the battery may be short circuited and there is



8. After removing the battery from the tool or

charger, be sure to attach the battery cover to

the battery and store it in a dry place.

9. If the battery cartridge gets wet, drain the

water inside and then wipe it with a dry cloth.

Dry the battery cartridge completely in a dry

place before use.

Putting into operation

1. The cutting tool has to be equipped with the

guard. Never run the tool with damaged guards

or without guards in place!

2. Make sure there are no electrical cables, water

pipes, gas pipes etc. that could cause a hazard

if damaged by use of the tool.

Operation

1. Always keep your hands, face, and clothes

away from the cutting tool when it is rotating.



2. During operation, keep bystanders or animals

at least 15 m away from the tool. Stop the tool

as soon as someone approaches.

3. During operation, never stand on an unstable

or slippery surface or a steep slope. During

the cold season, beware of ice and snow and

always ensure secure footing.

4. Never work on a ladder or tree to avoid loss of

control.

5. When you leave the tool, even if it is a short

time, always remove the battery cartridge. The

unattended tool with the battery cartridge installed

may be used by unauthorized person and cause

serious accident.

6. Before starting the tool, be sure that the cut-

ting tool is not touching the ground and other

obstacles such as a tree.

7. Check the cutting attachment frequently

during operation for cracks or damages.

Before the inspection, remove the battery

cartridge and wait until the cutting attachment

stops completely. Replace damaged cutting

attachment immediately, even if it has only



8. Do not operate the tool in bad weather or if

there is a risk of lightning.

9. During operation always hold the tool with

both hands. Never hold the tool with one hand

during use.

10. During operation, use the shoulder harness.



11. Do not touch the gear case during and imme-

diately after the operation. The gear case

becomes hot during operation and can cause burn



12. Take a rest to prevent loss of control caused

by fatigue. We recommend taking a 10 to 20-min-

ute rest every hour.

13. When you use the tool on muddy ground, wet

slope, or slippery place, pay attention to your

footing.

14. Avoid working in poor environment where

increased user fatigue is expected.

12 ENGLISH

15. Do not use the tool in bad weather where visi-

bility is limited. Failure to do so may cause fall or

incorrect operation due to low visibility.

16. Do not submerge the tool into a puddle.

17. Do not leave the tool unattended outdoors in

the rain.

18. When wet leaves or dirt adhere to the suc-

tion mouth (ventilation window) due to rain,

remove them.

19. Do not use the tool in the snow.

Cutting tools

1. When using cutting blades, avoid kickback

and always prepare for an accidental kickback.

See the section for Kickback.

2. When not in use, attach the blade cover onto

the blade. Remove the cover before operation.

Kickback (Blade thrust)

1. Kickback (blade thrust) is a sudden reaction

to a caught or bound cutting blade. Once it

occurs, the tool is thrown sideway or toward

the operator at great force and it may cause

serious injury.

2. Kickback occurs particularly when applying

the blade segment between 12 and 2 o'clock

to solids, bushes and trees with 3 cm or larger

diameter.

Fig.2

3. To avoid kickback:

1. Apply the segment between 8 and 11

o'clock.

2. Never apply the segment between 12 and

2 o'clock.

3. Never apply the segment between 11 and

12 o'clock and between 2 and 5 o'clock,

unless the operator is well trained and

experienced and does it at his/her own

risk.

4. Never use cutting blades close to solids,

such as fences, walls, tree trunks and

stones.

5. Never use cutting blades vertically, for

such operations as edging and trimming

hedges.

Fig.3

Vibration

1. People with poor circulation who are exposed

to excessive vibration may experience injury

to blood vessels or the nervous system.

Vibration may cause the following symptoms



asleep" (numbness), tingling, pain, stabbing sen-

sation, alteration of skin color or of the skin. If any

of these symptoms occur, see a physician!

2. 

keep your hands warm during operation and

well maintain the tool and accessories.

Transport

1. 

remove the battery cartridge. Attach the cover

to the cutting blade.

Maintenance

1. Before doing any maintenance or repair work



remove the battery cartridge.

2. When handling a cutter blade, always wear

gloves and put the blade cover on the blade.

3. Keep handles dry, clean and free from oil and

grease. Keep all cooling air inlets clear of

debris.

4. Do not wash the tool with high pressure water.

5. When washing the tool, do not let water enter

the electrical mechanism such as battery,

motor, and terminals.

6. Perform inspection or maintenance in a place

where rain can be avoided.

7. After using the tool, remove the adhered dirt

and dry the tool completely before storing.

Depending on the season or the area, there is a

risk of malfunction due to freezing.

Storage

1. Before storing the tool, perform full cleaning

and maintenance. Remove the battery car-

tridge. Attach the cover to the cutting blade.

2. Store the tool in a dry and high or locked loca-

tion out of reach of children.

3. When storing the tool, avoid direct sunlight

and rain, and store it in a place where it does

not get hot or humid.

Important safety instructions for

battery cartridge

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery char-

ger, (2) battery, and (3) product using battery.

2. Do not disassemble or tamper with the battery

cartridge.

or explosion.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current



breakdown.

13 ENGLISH

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn



8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge. Such conduct may result in a



9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.



battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

 Installing the batteries to

-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge.

burst and malfunction of the tool or battery car-



17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near a high-voltage elec-

trical power lines. It may result in a malfunction

or breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting



also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

4. When not using the battery cartridge, remove

it from the tool or the charger.

5. Charge the battery cartridge if you do not use

it for a long period (more than six months).

PARTS DESCRIPTION

Fig.4

1Battery cartridge 2 3Hanger 4Handle

5Release button 6Barrier 7Switch trigger 8Speed indicator

9Main power button 10 Caution lamp 11 Reverse button 12 Shoulder harness

14 ENGLISH

FUNCTIONAL

DESCRIPTION

WARNING: Always be sure that the tool is



before adjusting or checking function on the tool.





start-up.

Installing or removing battery

cartridge

CAUTION: 

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-



cartridge. Failure to hold the tool and the battery



and result in damage to the tool and battery cartridge



Fig.5: 1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as



CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,



you or someone around you.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

Tool / battery protection system

The tool is equipped with a tool/battery protection



the motor to extend tool and battery life. The tool will

automatically stop during operation if the tool is placed



Fig.6: 1. Caution lamp

Caution lamp Status

Color On Blinking

Green Overload

Red (tool) / (battery) Overheat

Red Over

discharge

Overload protection

If the tool or battery gets into one of the following situa-

tion, the tool automatically stops and the caution lamp



— The tool is overloaded by entangled weeds or

other debris.

— The cutting tool is locked or kicked back.

— The main power button is turned on while the

switch trigger is being pulled.

In this situation, release the switch trigger and remove

entangled weeds or debris if necessary. After that, pull

the switch trigger again to resume.

CAUTION: If you need to remove the entan-

gled weeds on the tool or release the locked



start.

Overheat protection for tool or

battery

If the tool or battery cartridge is overheated, the tool

stops automatically. When the tool is overheated, the

caution lamp lights up in red. When the battery cartridge

is overheated, the caution lamp blinks in red. Let the

tool and/or battery cool down before turning the tool on

again.

Overdischarge protection

When the battery capacity becomes low, the tool stops

automatically and the caution lamp starts blinking in red.

If the tool does not operate even when the switches are

operated, remove the battery cartridge from the tool and

charge it.

Indicating the remaining battery

capacity

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for a few seconds.

Fig.7: 1. Indicator lamps 2. Check button

Indicator lamps Remaining

capacity

Lighted  Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

15 ENGLISH

NOTE: Depending on the conditions of use and the



from the actual capacity.

NOTE:

the battery protection system works.

Main power switch

WARNING: 

switch when not in use.

Press the main power button to turn on the tool. To turn





Fig.8: 1. Main power button

NOTE: The caution lamp brinks if the switch trigger

is pulled under unoperatable conditions. The caution

lamp blinks if you turn on the main power switch while



NOTE:

To avoid unintentional start up, the main power switch

will automatically shut down when the switch trigger

is not pulled for a certain period after the main power

switch is turned on.

Switch action

WARNING: For your safety, this tool is



tool from unintended starting. NEVER use the tool

if it runs when you simply pull the switch trigger



tool to our authorized service center for proper

repairs BEFORE further usage.

WARNING: NEVER tape down or defeat pur-



CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

CAUTION: 

power button and switch trigger when carrying

the tool. The tool may start unintentionally and cause



NOTICE: Do not pull the switch trigger hard with-



switch breakage.

To prevent the switch trigger from being accidentally



Fig.9: 1.2. Switch trigger

To start the tool, turn on the main power switch and



grasp) and then pull the switch trigger. Tool speed is

increased by increasing the pressure on the switch

trigger. To stop the tool, release the switch trigger.

Speed adjusting

You can select the tool speed by tapping the main

power button. Each time you tap the main power button,

the level of speed will change.

Fig.10: 1. Speed indicator 2. Main power button

Speed indicator Mode

High

Medium

Low

Reverse button for debris removal

WARNING: 

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove.

remove the battery cartridge may result in serious



This tool has a reverse button to change the direction of

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull



when the cutting tool is stopped. The speed indicators

start blinking, and the cutting tool rotates in reverse

direction when you pull the switch trigger.

To return to regular rotation, release the trigger and wait

until the cutting tool stops.

Fig.11: 1. Speed indicator 2. Reverse button

NOTE: During the reverse rotation, the tool operates

only for a short period of time and then automatically

stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE: If you tap the reverse button while the cutting

tool is still rotating, the tool comes to stop and to be

ready for reverse rotation.

Electronic torque control function

The tool electronically detects a sudden drop in the

rotation speed which may cause a kickback. In this

situation, the tool automatically stops to prevent further

rotation of cutting tool. To restart the tool, release the

switch trigger. Clear the cause of sudden drop in the

rotation speed and then turn the tool on.

NOTE: This function is not a preventive measure for

kickbacks.

16 ENGLISH

ASSEMBLY

WARNING: Always be sure that the tool is



before carrying out any work on the tool. Failure to





WARNING: Never start the tool unless it is

completely assembled. Operation of the tool in a

partially assembled state may result in serious per-



Mounting the handle

Attach the handle with supplied clamps and bolts. Make

sure that the handle is located between the spacer and

the arrow mark. Do not remove or shrink the spacer.

Fig.12: 1. Clamp 2. Hex socket bolt 3. Handle

4. Arrow mark 5. Spacer

When using the following attachments, be sure to attach

the barrier to the handle using the screw on the barrier.

• Brushcutter attachment *

• Rotary scissors attachment

• Grass trimmer attachment *

• Edger attachment

*. Only when metal blade is attached.

Fig.13: 1. Barrier 2. Screw

Mounting the attachment pipe

CAUTION: Always check that the attachment

pipe is secured after installation. Improper instal-





Mount the attachment pipe to the power unit.

1. Turn the lever of the power unit toward the attach-

ment side.

Fig.14: 1. Lever

2. Remove the cap of the attachment. Align the pin

with the arrow mark and insert the attachment pipe until

the release button pops up.

Fig.15: 1. Release button 2. Arrow mark 3. Pin

3. Turn the lever toward the power unit side.

Fig.16: 1. Lever

Make sure that the surface of the lever is parallel to the

pipe.

To remove the pipe, turn the lever toward the attach-

ment side and pull the pipe out while pressing down the

release button.

Fig.17: 1. Release button 2. Lever 3. Pipe

Adjusting the handle position

-

dling of the tool.

Loosen the hex socket head bolt on the handle. Move

the handle to a comfortable working position and then

tighten the bolt.

Fig.18: 1. Handle 2. Hex socket head bolt

Attaching the shoulder harness

WARNING: Be extremely careful to maintain

control of the tool at all times. Do not allow the



work vicinity. Failure to keep control of the tool



operator.

CAUTION: When you use the tool in combi-

nation of the backpack-type power supply such

as portable power pack, do not use the shoulder

harness included in the tool package, but use the

hanging band recommended by Makita.

If you put on the shoulder harness included in the

tool package and the shoulder harness of the back-

pack-type power supply at the same time, removing



case of an emergency, and it may cause an accident



Makita Authorized Service Centers.

CAUTION: Always use the shoulder harness

attached to the tool. Before operation, adjust the

shoulder harness according to the user size to

prevent fatigue.

CAUTION: Before operation, make sure that

the shoulder harness is properly attached to the

tool.

1. Clasp the hook on the shoulder harness to tool's

ring and hanger.

Fig.19: 1. Ring 2. Hook 3. Hanger

2. Put on the shoulder harness on your left shoulder.



position.

Fig.20

The shoulder harness features a means of quick

release.

Simply squeeze the sides of the buckle to release the

tool from the shoulder harness.

Fig.21: 1. Buckle

Hex wrench storage

CAUTION: Be careful not to leave the hex

wrench inserted in the tool head. It may cause



When not in use, store the hex wrench as illustrated to

keep it from being lost.

Fig.22: 1. Handle 2. Hex wrench

17 ENGLISH

MAINTENANCE

WARNING:

Always be sure that the tool is



attempting to perform inspection or maintenance on the

tool.



NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

To maintain product SAFETY and RELIABILITY,



be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

Cleaning the tool



a dry cloth or one dipped in soapy water and wrung out.

To avoid overheating of the tool, be sure to remove the



Battery guard

WARNING:

Do not remove the battery guard.

Do not use the tool with the battery guard removed

or damaged. Direct impact to the battery cartridge





contact your authorized service center for repairs.

Fig.23: 1. Battery guard

TROUBLESHOOTING



do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-

ment parts for repairs.

State of abnormality Probable cause (malfunction) Remedy

Motor does not run. Battery cartridge is not installed. Install the battery cartridge.

Battery problem (under voltage) 

replace battery.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

Motor stops running after a little use. Rotation is in reverse. Change the direction of rotation with the reversing

switch.

Battery's charge level is low. 

replace battery.

Overheating. Stop using of tool to allow it to cool down.

It does not reach maximum RPM. Battery is installed improperly. Install the battery cartridge as described in this

manual.

Battery power is dropping. 

replace battery.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

OPTIONAL ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

 The use of any other

accessories or attachments might present a risk of



for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

Refer to "Approved attachment" section for the applica-

ble models for this tool.

• Brushcutter attachment

• String trimmer attachment

• Rotary scissors attachment

• Grass trimmer attachment

• Hedge trimmer attachment

• Ground trimmer attachment

• Pole saw attachment

• Cultivator attachment

• Edger attachment

 

• Shaft extension attachment

• Power brush attachment

• Power sweep attachment

• Blower attachment

• Makita genuine battery and charger

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may



18 FRANÇAIS

FRANÇAIS (Instructions originales)

SPÉCIFICATIONS

Modèle : UX01G

Vitesse à vide

(sans accessoire)

Faible 0 - 5 700 min-1

Moyen 0 - 8 200 min-1

Élevé 0 - 9 700 min-1

Longueur totale (sans la batterie) 1 001 mm

Tension nominale 36 V - 40 V c.c. max.

Poids net 5,3 kg - 12,5 kg

Degré de protection IPX4

 



 

 

plus lourde, conformément à la procédure EPTA 01/2014, sont indiquées dans le tableau.

Batterie et chargeur applicables

Type Batterie

BL4020 BL4025 BL4040 BL4050F BL4080F

Tête Débroussailleuse Disponible Disponible