Monster Abra A7 V14.1 Kullanım kılavuzu

USER MANUAL

KULLANIM KILAVUZU

MANUAL DE USUARIO

MANUEL DE L’UTILISATEUR

MANUALE UTENTE

BENUTZERHANDBUCH

 

A7 V14.1

01

EN

USER MANUAL

TABLE OF CONTENT

CHAPTER 1 - Preface ........................................................................02

1.1 Regulations Information ....................................................................... 02

FCC Information ............................................................................................ 03

RF Exposure Information(SAR) ................................................................. 04

1.2 Safety Information ................................................................................05

1.3 Conventions For This Manual ..............................................................06

CHAPTER 2 - Getting To Know The Basics .......................................06

2.1 Product Specifcation .............................................................................06

2.2 Preparing your Computer ....................................................................08

2.3 Product Overview .................................................................................. 09

CHAPTER 3 - Getting Started ........................................................... 16

3.1 AC Adapter ................................................................................................ 16

3.2 Knowing The Keyboard ........................................................................ 17

3.2.1 For Keyboard Users ............................................................................. 17

3.3 Using the touchpad / clickpad ............................................................. 19

CHAPTER 4 - Bios Setup ..................................................................20

4.1 About Bios Setup ................................................................................... 20

4.1.1 When To Use Bios Setup? .................................................................. 20

4.1.2 How to Run BIOS Setup ? ..................................................................20

4.2 BIOS Setup Menu ...................................................................................21

4.2.1 Main Menu ............................................................................................ 21

4.2.2 Advanced Menu ................................................................................. 22

4.2.3 Security Menu .....................................................................................23

4.2.4 Boot Menu ...........................................................................................24

4.2.5 Exit Menu ............................................................................................. 25

A7 V14.1

02

EN

The information in this user’s manual is protected by copyright laws, all parts of this manual,

including the products and software described in it, can not be

reproduced, transmitted, transcribed, stored in a retrieval system, nor

translated into any language.

THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS

CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES,

WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.

The illustrations in this user’s manual are for reference only. Actual product specifcations may

vary with territories. The information in this user’s manual is subject to change without notice.

CHAPTER 1

1.1 Regulations Information

NOTICE

Preface

• CE compliance

This device is classed as a technical information equipment (ITE) in class B

and is intended for use in living room and ofce. The CE-mark approves the

conformity by the EU-guidelines:

- EMC Directive 2014/30/EU,

- Low Voltage Directive 2014/35/EU(equals A2 : 2013),

- RF Directive 2014/53/EU

SAR/DAS refers to the rate at which the body absorbs RF energy. The SAR limit set by the

ICNIRP Guidelines is 2.0 W/kg(10g). Testing for SAR is conducted using standard operating

positions accepted by the EN standard. During testing, the radio is set to its highest transmis-

sion levels and placed in positions that simulate use against the body.

This product is compliant with ICNIRP Guidelines with respect to Electromagnetic Fields (EMF)

which specifies a Specific Absorption Rate (SAR) limit of 2W/kg. DAS*/SAR: 0.014 W/kg

(corps/body).

03

Rechargeable Battery Notice

Do not

1. Throw into fire or a hot oven, or mechanically crush or cutting of a BATTERY

2.Throw or immerse into water

3.Heat to more than 60°C

4.Repaire or disassemble

5.Leave in an extremely low air pressure environment

6.Leave in an extremely high-temperature environment

A power cord is connected to a socket-outlet with earthing connection.

The unit can be operated at an ambient temperature of max. 35°C (95°F). Do not subject it to

temperatures below 5°C (41°F) or above 40°C (104 °F).

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF

USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

PREVENTION OF HEARING LOSS

CAUTION: Listening to music at high volume levels and for extended durations can damage

one’s hearing. In order to reduce the risk of damage to hearing, one should lower the

volume to a safe, comfortable level, and reduce the amount of time listening at high levels.

Headsets should comply with EN 50332-2 requirements.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

04

EN

This device meets the government’s requirements for exposure to radio waves.

This device is designed and manufactured not to exceed the emission limits for

exposure to radio frequency (RF) energy set by the Federal Communications

Commission of the U.S. Government.

The exposure standard employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are

conducted using standard operating positions accepted by the FCC with the EUT

transmitting at the specified power level in different channels.

The FCC has granted an Equipment Authorization for this device with all reported

SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR

information on this device is on file with the FCC and can be found under the

Display Grant section of www.fcc.gov/eot/ea/fccid after searching on

FCC ID: 2AKHFAX201NG .

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications not expressly approved

by the grantee of this device could void the user’s authority to

operate the equipment.

CAUTION:

RF Exposure Information(SAR)

05

1.2 Safety Information

Do not apply heavy pressure to the computer or subject

it to any form of strong impact as this can damage

the computer’s components or otherwise cause it to

malfunction.

1

Never cover or block the air vents including those

located at the base of the computer. Never cover your

computer or AC adaptor with any object.

2

Do NOT expose to or use near liquid, rain, or moisture.

Do NOT use the modem during electrical storms.

4

Do not use or expose this device around

magnetic felds as magnetic interference may

aect the performance of the device.

5

To keep your computer in prime operating condition,

protect your work area from direct sunlight.

3

06

EN

1.3 Conventions For This Manual

2.1 Product Specification

This message contains important information that must

be followed for safe operation.

CAUTION:

NOTE: This message contains information for special situations.

CHAPTER 2

Getting To Know The Basics

This User’s Manual provides technical information of instructions and illustrations on how to

operate this notebook for the customer. Please read this manual carefully before using this

notebook.

Physical Characteristic

Processor - CPU

Graphic Card - GPU

I/O Port

Dimension 392.9*260* 24.9mm

Support Processor i5-12500H

Graphic Card 4 GB GTX 1650

Weight 2.55kg +/- 5%

DDR4 DDR4 3200MHz

LCD 17.3” 1920x1080,IPS/45% 144Hz

Memory

Display

DC-in x 1

USB x 2: USB 3.1 (Gen1)

x 1: USB 3.1 (Gen2)

x 1: USB 3.1 (Gen2) + DP1.4

07

MODEL IS DESIGNED TO USE WITH THE

DC INPUT: 150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins

CAUTION:

Audio

Input

Power

Webcam

Communication Port

Audio Codec Codec: CX11800

*Azalia standard support, *D3 mode support, *Smart AMP support

Speaker/Mıc Build-in 2 speakers

*Speaker : 2W/each

*Digitial Microphone support

Keyboard Single Zone

Pointing Device TDB5297, Outline: 154*100* 0.6 mm, AA: 150*94.6 mm, Mylar,

Enable/Disable area :10mmx10mm, Palm Rejection:Support,

Controller change to PCT3854, support Windows update

AC Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz

150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins

Battery Li- polymer Battery, SW Gas Gauge IC, soft pack

3 cells (3s1p 4100mAh)46.74Wh

Webcam HD webcam with D-MIC*1 ,4mm

LAN *Supports 10/100/1000/2500 Mb/sec

*PCI-E interface

*Power Down Mode D1~D3 support

*PCIe ASPM L1.1, L1.2 support

*UI for network package management

Wireless LAN + BT INTEL AX201

I/O Port

RJ45 x 1

HDMI 2.1 x 1

Audio out & Mic in x 2

Card reader x 1 USB3.0 interface, SD/SDHC/SDXC, UHS-I speed

Connecter: Full SD size

08

EN

2.2 Preparing your Computer

AConnect the AC adaptor’s DC output plug to the DC IN jack.

BThe display panel can be opened to a wide range of angles for optimalviewing.

CPress the power button to turn on your notebook computer.

09

2.3 Product Overview

Please become familiar with each component before you operate the computer.

Top-Open View

The product’s color, I/O port, indicator location, and specifcation will depend

upon the actually shipping product.

NOTE

10

EN

1Camera Status LED

The Camera Status LED shows the Camera status.

2Camera

A device that allows you to record video or take photographs with your

computer.

3Microphone

Built-in microphones. IR CCD MIC*2

4LCD Screen

Displays of your notebook computer.

6Power Button

Press this button to turn the computer’s power on or o.

7

5Oce/Game/Turbo Mode Switch(option)&LED

Turbo mode : Both White (All lights)

Game mode : White (Bottom light)

Oce mode : OFF(default)

Power/Battery/Caps Lock LED indicator

Power ON: White

Suspend: Blinking White

Power O: OFF

Charging : Blinking White

Battery Low (<6%): Blinking Amber

Charging nish : OFF

Caps Lock Status LED

Default: ON (White)

When you are not using the computer,

keep the LCD screen closed to protect it from dust.

CAUTION:

11

1Card Reader

USB3 interface, SD/SDHC/SDXC, UHS-I speed

Connecter: Full SD size

2USB Port (Gen1)

Connects an USB device (such as USB Zip drive, keyboard or

mouse) into this jack with charging function.

3Vents

The thermal vents are designed to cool the internal components and avoid

overheating.

8Keyboard

The keyboard provides keys with comfortable travel

(The keyboard legend will depend on the spec / region)

9

10 Touchpad LED indicator/ Touchpad switch

Please refer to the description at the end of the manual.

Touchpad/Click pad

Touch-sensitive pointing device which functions like the mouse.

Right Side View

12

EN

1Vents

The thermal vents are designed to cool the internal components and

avoid overheating.

2USB Port (Gen2)

Connects an USB device (such as USB Zip drive, keyboard or

mouse) into this jack. With charging function.

3

4

Mic In Jack

Connects amplied speakers, headphones or microphone into this jack.

Audio Combo ( Mic In Jack/Audio Out Jack)

Connects amplied speakers, headphones or microphone into this jack.

Left Side View

13

Bottom Side View

The product’s thermal vent will depend upon the actually shipping product.

NOTE

1Vents

The thermal vents are designed to cool the internal components and avoid

overheating.

2Speaker

To reduce the possibility of heat-related injuries or of overheating the computer,

do not place the computer directly on your lap or obstruct the computer air vents. Use the

computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining

optional printer, or a soft surface, such as pillows or rugs or clothing, to block

airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface,

such as pillows or rugs or clothing, during operation.

CAUTION:

14

EN

Compartment View

Specication will depend upon the actually shipping product.

NOTE

SSD

BATTERY

RAM

If need to upgrade SATA SSD to PCIE SSD, Please contact

technical support and after-sales service .

Front Side View

15

Back Side View

1

4

Vents

The thermal vents are designed to cool the internal components and avoid

overheating.

HDMI port

Connected to the screen, or home theater system.

2

5

6

Kensington® Lock Port

To be secured using Kensington® Lock Port security products.

Network Jack

This jack lets you connect to a LAN.

Power Connector

Connects the AC adapter into this connector.

3USB Type C Port

USB Type C / DP / USB Power Delivery

16

EN

CHAPTER 3

Getting Started

3.1 AC Adapter

Please be noted that it is strongly recommended to connect the AC adapter and use the

AC power while using this notebook for the first time. When the AC adapter is connected,

the battery is being charged immediately. Attach the AC adapter when you need to charge

the battery or you want to operate from AC power. It is also the fastest way to get started,

because the battery pack will need to be charged before you can operate from battery power.

Note that the AC adapter included in the package is approved for your notebook; using other

adapter model may damage either the notebook or other devices attached to it.

NOTE

The use of inferior extension cords may result in damage to your notebook. Your notebook

comes with its own authorized AC adapter. Use of a different AC adapter or cable extension

which is not authorized for use will void warranty protection if damage to hardware is found in

association to said adapter or extension cable.

The power adapter can become hot when in use. Please be sure the AC adapter is not covered

with any materials keep it away from exposed parts of your body. The AC adapter appearance

may vary depending on your region.

CAUTION:

17

3.2 Knowing The Keyboard

3.2.1 For Keyboard Users

The following defnes the colored hot keys on the Keyboard. The colored commands can only

be accessed by frst pressing and holding the function key while pressing a key with a colored

command.

To activate these functions, press the hot key associated with the desired function as below :

The number of keys available on your keyboard will depend on the country/region in

which the keyboard was designed and built.

Suspend: Press this key combination (Fn+F1) to enter sleep

mode.

Press this key combination (Fn+F2) to turn Windows

Lock/On .

Press this key combination (Fn+F3)

to enable Display Mode.

Press this key combination (Fn+F4) to turn all radios

on or off.

Press this key combination (Fn+F5) to On/Off Touch

pad mode.

Windows Lock/On:

Display Mode:

RADIO On/Off:

Touch pad On/Off:

Keypad Function Description

NOTE

18

EN

Keyboard Brightness down: Press this key combination (Fn+F6) to decrease

brightness of Keyboard.

Press this key combination (Fn+F7) to increase bright-

ness of Keyboard.

Press this key combination (Fn+F8) to enter MUTE

mode.

Press this key combination (Fn+F9) to enter Volume

down mode.

Press this key combination (Fn+F10) to enter Volume

up mode.

Press this key combination (Fn+F11) to decrease

brightness of LCD display.

Press this key combination (Fn+F12) to increase

brightness of LCD display.

For a full list of Windows keyboard shortcuts, please

visit the Microsoft official website.

https://support.microsoft.com/en-us/

Keyboard Brightness up:

MUTE:

Volume down:

Volume up:

Brightness down:

Brightness up:

Search Charm:

Keypad Function Description

19

Click twice left corner will open or

close touchpad functionality.

Click twice right corner will open or

close right half touchpad

functionality.

no light on the left and right,

the touchpad can be used in all

areas.

3.3 Using the touchpad / clickpad

The touchpad / clickpad is a rectangular electronic panel located just below your keyboard.

Click twice left corner will open or close (light) touchpad functionality.You can use the stat-

ic-sensitive panel of the touchpad / clickpad and slide it to move the cursor. You can use the

buttons below the touchpad as left and right mouse buttons.

Press the left and right buttons located on the edge of the touchpad / clickpad to make

selections and run functions. These two buttons are similar to the left and right buttons on a

mouse. Tapping on the touchpad / clickpad produces similar results.

1 2

Sayfa yükleniyor ...

Monster Abra A7 V14.1 Kullanım kılavuzu

Monster Abra A7 V14.1 Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler

Diğer Belgeler