Kayalar KGKF-8090 Kullanım kılavuzu

Tip
Kullanım kılavuzu

Bu kılavuz için de uygundur

COOKER
RANGE WITH OVEN
PERFECT
700 SERİ / 700 SERIES :
600 SERİ / 600 SERIES :
900 SERİ / 900 SERIES :
700 SERİ / 700 SERIES600 SERİ / 600 SERIES900 SERİ / 900 SERIES
USER MANUAL
KULLANMA KLAVUZU
½” R ½” R ½” R
А1
А1
½” R
½” R
½” R
½” R½” R
А1
А1
А1
А1
А1
6x4=24
6x2=12 6x4=24 6+8,5
=14,4
6x2+8,5x2
=29
6x2=12
2x4=8 2x2=4
KGO-
4060
400x620x
300
20 35 40 60 55 80 65 90
600x620x
300
400x740x
300
800x740x
300
400x740x
850
800x740x
850
400x900x
850
800x900x
850
KGO-
6060
KGO-
4070
KGO-
8070
KGOD-
4070
KGOD-
8070
KGOD-
4090
KGOD-
8090
NET AĞIRLIK
(Kg)
GAZ GİRİŞİ
(inch)
TİP
ISIL GÜÇ
(KW) (Hİ)
ΣQN
GENEL
ÖLÇÜLER
(mm)
SİZİN
MODELİNİZ
А1
½” R
А1
6x4+(6)
=30
120
800x740x
850
KGKF-
8070
½” R
А1
6x2+8,5x2+(8)
=37
140
800x900x
850
KGKF-
8090
(MODELS)
(SİZES)
(TYPE)
(HEAT
POWER)
(GAS INPUT)
(NET WEIGHT)
TECHNICAL SPECIFICATIONS
600 SERIES COOKER
900 SERIES COOKER
945 SERIES COOKER
985 SERIES COOKER
643 SERIES COOKER
663 SERIES COOKER
439,9
300
265
148,7
620
110,16 389,78
400
300
265
25 350
25
300
439,9
300
265
148,7
620
110,16 389,78
600
300
265
25 550
25
300
850
400
72,5
255
72,5
719
930
61,33
911,33
850
719
131
71,53
690,46
652,04
101,29
32,03
888,5
930
61,33
911,33
850
719
131
71,53
690,46
652,04
101,29
888,5
850
800
72,5
655
72,5
719
32,03
700 SERIES COOKER
743 SERIES COOKER
783 SERIES COOKER
745 SERIES COOKER
785 SERIES COOKER
364,3
61,33
273
303
740
65
525
50
400
303
273
20,5 359 20,5
364,3
61,33
273
303
740
65
525
50
800
303
273
20,5 20,5
759
740
61,33
911,33
850
719
131
69,8
500,4
462,04
101,29
902
850
400
72,5
255
72,5
719
32,03
740
61,33
911,33
850
719
131
69,8
500,4
462,04
101,29
902
850
800
72,5
655
72,5
719
32,03
740
61,33
911,33
850
719
131
69,8
500,4
462,04
101,29
902
850
800
72,5
655
72,5
719
32,03
930
61,33
911,33
850
719
131
888,5
71,53
690,46
652,04
101,29
850
800
72,5
655
72,5
719,8
32,03
700 SERIES RANGE WITH OVEN
785 SERIES RANGE WITH OVEN
900 SERIES RANGE WITH OVEN
985 SERIES RANGE WITH OVEN
PRESENTATION
Dear User,
We thank you for having preferred our device and having relied on our company.
Our devices are being used in industry kitchens in 75 countries together with you.
Our device has been produced in accordance with international standards. We
strongly remind you that you read the instruction book, have your user read it to get
the highest efficiency from the device matching your expectations and to use it for
a long term. we ask you to take into consideration the following warnings before
calling our service.
* Please read the instruction book before installing and using the device and
ensure that people using the device read it. if you turn on the machine without
reading the instruction book, the device shall be out of the scope of the warranty.
* The instruction book, giving information on assembly use and maintenance of the
product bought has to be read carefully. Ensure that the electrical installations onto
which the device will be connected are prepared in accordance with legal
legislations by qualified personel before appearance of our authorized service
personel for assembly of the device.
* Get help from the nearest authorized service for issues over which you hesitate.
* We remind you that the relevant costs and the fee for each hour of stay will be
invoiced to you if the service personel called for assembly is kept waiting.
* We hope that you get the highest efficiency from our product...
SUNUM
* Cihazımızı tercih ettiğiniz ve rmamıza olan güveniniz için teşekkür
ediyoruz. Cihazlarımız sizinle birlikte 60 ülkede sanayi mutfaklarında
kullanılmaktadır
* Cihazımız, uluslararası standartlara uygun olarak üretilmiştir.
* Cihazdan beklentilerinize uygun verim alabilmeniz ve uzun süreli
kullanmanız için kullanma kılavuzunu kesinlikle okumanızı, kullanıcınıza
okutmanızı önemle hatırlatırız. Servisimizi çağırmadan önce aşağıdaki
uyarıları dikkate almanızı rica ediyoruz.
* Elinizdeki kılavuzu lütfen cihazı kurmadan ve kullanmadan önce dikkatle
okuyunuz, cihazı kullananların okumasını sağlayınız. Kılavuzu okumadan
makineyi alıştırdığınızda cihaz garanti kapsamı dışında kalacaktır.
* Satın aldığınız ürünümüzün montajı, kullanılması ve bakımı ile ilgili
bilgileri veren kılavuz dikkatle okunmalıdır.Cihazın bağlantısının yapılacağı
elektrik tesisatının yasal mevzuatlara uygun şekilde ehliyetli elemanlarca,
yetkili servis elemanlarımız cihazın montajı için gelmeden hazırlanmasını
sağlayınız.
* Tereddüt ettiğiniz ve anlayamadığınız hususlar için size en yakın yetkili
servisten telefonla bilgi isteyiniz.
* Montaj için çağrılan servis elemanının bekletilmesi halinde masraar ve
her saat için bekleme ücretinin tarafınıza fatura edileceğini hatırlatırız.
KAYALAR ÇELİK SAN. TİC. A.Ş
SAFETY RELATED DETAILS
The device has by all means be operated under ventilation hood.
In the area, where the device operates, no solid or liquid
combustible materials (garments, alcohol and derivatives,
petroleum chemicals, wood and plastic materials, curtains etc.)
should be given place.
Do not clean with pressurized water.
You can use our devices together with our devices of
the same series.
This device has to be installed in accordance with applicable
regulations and has solely be used at well-ventilated locations.
Apply to instructions before installation and use of the device.
The device has been produced for the purpose of
industrial use and has to solely be used by the personnel,
who have been trained for the said device.
The device should not be intervened in by persons out
of the producer or the authorized service.
In case of fire, blazing in the area, where the device is used,
turn off the gas valves and electric switchgears (if any) without
getting into panic and use a fire extinguisher. Never use water to
extinguish flames.
GÜVENLİK İLE İLGİLİ DETAYLAR
Cihaz, kesinlikle davlumbaz altında çalıştırılmalıdır.
Basınçlı su ile temizlemeyiniz.
Cihazlarımızı aynı serideki diğer ürünlerimizle beraber yanyana
kullanabilirsiniz.
Cihaz endüstriyel kullanım amaçlı yapılmış olup sadece cihazla
ilgili eğitim almış elemanlar tarafından kullanılmalıdır.
Üreticinin veya yetkili servisin dışında cihaza müdahale
edilmemelidir.
Cihazın kullanıldığı alanda herhangi bir sebeple yangın alev
parlaması gibi durumlarda paniklemeden ( varsa ) gaz vanalarını
ve elektrik şalterlerini kapatarak yangın söndürücü kullanınız.
Alevi söndürmek için asla su kullanmayınız.
Bu cihaz yürürlükteki yönetmeliklere uygun olarak tesis edilmeli
ve yalnız iyi havalandırılmış bir yerde kullanılmalıdır. Cihazın tesisi
ve kullanımdan önce talimatlara başvurun.
Cihazın çalıştığı alanda yanabilen her türlü katı sıvı malzemeler
(Elbise, alkol ve türevleri, petro – kimya ürünleri, ahşap ve plastik
malzemeler, perdeler v.s. ) kesinlikle bulundurulmamalıdır.
ASSEMBLY OF THE DEVICE
In order to locate the device near to a wall and partition, kitchen furniture, decorative
coating etc., the said items have to be made of nonammable
material or coated with an appropriate thermal insulation material in which case the
distance in-between has to be 5 cm or otherwise 20 cm at minimum. It is
recommended that re protection rules are attached special importance.
All of the below-mentioned items on assembly of the device have to be fullled by the
authorized service personnel.
THE MIN. DISTANCE BETWEEN THE TUBE
AND THE DEVICE SHOULD BE 50 CM
* The feet of the undercounter stand onto which the device will be placed have to be adjustable and it has to
be ensured that the device operates on a scale level.
* All gas connections of the device have to be in accordance with ISO 7-1 or ISO 228-1 standards.
* Before gas connection of the device is made by an authorized technical service personnel, its label should
by all means be checked at rst and gas connection has to be made according to the specied gas type and
pressure. Connection should not be made for dierent types of gases and/or pressures.
* Gas connection inlet measures have been dened in THE TECHNICAL SPECIFICATIONS list.
* After connection of the device to the gas system, any gas leakage should by all means be checked using
soap bubble.
* After the device is checked by the authorized service personnel, air adjustment is made if deemed necessary.
* The declared power of the device may by no means be changed as a result of user
requests. All interventions in the valves and the injectors for this purpose shall make
the device out of the scope of the warranty.
* Do not have unoriginal spare parts used in the device. If any
spare parts not provided from our company are assembled into the device, the
device shall be out of the scope of the warranty.
THE MIN. DISTANCE BETWEEN THE TUBE
AND THE DEVICE SHOULD BE 50 CM
TAŞIMA VE YER DEĞİŞTİRME
CİHAZIN MONTAJI
Yer değiştirme ; Yetkili Servis tarafından montajı yapılmış cihazın yetkili
servis dışında YERİ DEĞİŞTİRİLEMEZ, ELEKTRİK BESLEME KABLOSU
UZATILAMAZ, DEĞİŞTİRİLEMEZ.
* Cihaz insan gücüyle dik bir şekilde palet üzerine yerleştirilmelidir.
* Forklift ayakları cihaz altına yerleştirilerek cihaz taşınır.
* Taşıma mesafesinin uzak olması durumunda yavaş hareket edilmeli, gerekirse
sallantılara karşı cihaz palete sabitlenmeli veya bir kişi tarafından dengesi korunmalıdır.
* Ürünü taşırken bir yere çarpmayınız ve düşürmeyiniz.
Bu cihazın bir duvar, bölme, mutfak mobilyası, dekoratif kaplama vb.ne yakın
konumlandırılması için, bunların yanmaz malzemeden yapılması veya uygun
bir yanmaz ısı yalıtım malzemesi ile kaplanması durumunda aradaki mesafe
5 cm, aksi halde en az 20 cm olmalıdır. Yangından korunma kurallarına azami
dikkat gösterilmesi tavsiye edilir.
Aşağıda cihazın montajı ile ilgili bahsi geçen maddelerin tamamı yetkili
servis elemanı tarafından yapılmalıdır.
Cihazın ayakları ayarlı olmalı ve cihazın terazi düzleminde çalışması sağlanmalıdır.
Cihazın elektrik bağlantısı ehliyetli bir elektrikçi tarafından kontrol edilmeli, yerden max.
170 cm yükseklikteki sigortaya bağlanmalıdır.
Elektrik bağlantısı; kaçak akım tehlikesine karşı besleme sigortasına 30 mA lik kaçak
akım sigortası konularak yapılmalıdır.
Cihazın elektrik tesisatının en yakın panodaki topraklama barına bağlanarak
topraklanması sağlanmalıdır.
USE OF THE DEVICE
A. GENERAL
1. It is used for the purpose of cooking at the kitchens of countertop stove restaurants, fast foods,
canteens, hospitals, personnel dining halls etc.
2. The exterior of the device has to be wiped with a squeezed cloth applying warm soapy water before
the rst use.
3.The device has to be placed under a ltered ventilation hood connected to the ventilation duct.
NOTE: Do not go out of the intended purpose.
The machine has to be operated by a person, who is aware of safety and technical terms and who has
read the instruction book.
B. TURNING ON THE DEVICE
1.Ignition of the burner:
In order to ignite the burner, the safety valve (A) shall be brought to on position. After waiting for
approximately 20-25 seconds in this position (the time passing until discharge of air remaining in the
gas installation at the end of the rst use and gas outow). We ignite the burner with an exterior
ignition source in the models without a lighter (kitchen lighter, matches etc.) and by pressing on the
lighter (B) in the models with a lighter. Since the device contains a ame control device, we keep on
pressing the valve (for 10-15 seconds) in order for the ame control to detect the heat of the ame and
permit gas transition. If the burner ame does not go o when we keep our hands o from the safety
valve, we can leave it.
2. In order to operate the cooker at low ame, you have to rotate the safety valve to the small ame
position.
3. Cooking shall be done by placing a cooking pot of an appropriate size on the device.
4. No empty cooking pot should be placed onto a ame.
5. As soon as cooking is over, the cooking pot has to be taken from the top of the cooker.
6.Turning o the device:
In order to turn o the device, rotate the safety valve (A) to switch o position. It is recommended that
you turn o the tube as well after the device is turned o in order to prevent any danger.
FLAME CONTROL DEVICE:
If the ame of the pilot goes o accidentally when the device is on, the system shall automatically
turn o against any risk of gas leakage. Gas cut-o shall go on for 60 seconds at maximum.
A. GENEL
1. Setüstü ocak, restoranlarda, fast foodlarda, kantin, hastane gibi yerlerin
mutfaklarında, personel yemekhanelerinde v.b. yerlerde yemek pişirme amacıyla
kullanılır.
2. Cihaz ilk kullanımdan önce dış yüzeyi ılık sabunlu suya batırılarak sıkılmış bez
ile silinmelidir
3. Cihaz havalandırma kanalına bağlı ltreli davlumbaz altına konulmalıdır.
NOT : Kullanım amacı dışına çıkmayınız.
Makine güvenlik ve teknik şartlarını bilen ve kullanım kılavuzunu okumuş biri
tarafından kullanılmalıdır.
B. CİHAZIN ÇALIŞTIRILMASI
1. Brülörün ateşlenmesi :
Brülörü ateşlemek için emniyet val (A) açık pozisyona getirilir. Bu konumda yaklaşık 20-25 sn (
İlk kullanımda gaz tesisatında kalan havanın atılıp gaz çıkışı sağlanıncaya kadarki süre )
bekledikten sonra çakmaksız modellerde elimize harici bir ateş kaynağı ( mutfak çakmağı, kibrit
v.s. ) alarak, çakmaklı modellerde çakmağa (B) basmak suretiyle brülörü ateşleriz. Cihazda alev
denetleme tertibatı olduğu için, alev denetlemenin alev ısısını algılayıp gaz geçişine
izin vermesi amacıyla valfe bir süre daha ( 10-15 sn. kadar ) basılı tutarız. Emniyet
valnden elimizi çektiğimiz esnada brülör alevi sönmüyorsa bırakabiliriz.
2. Ocağı kısık alevde çalıştırmak için emniyet valni küçük alev konumuna
çevirmemiz gerekir.
3. Cihazın üzerine uygun ebatta tencere konularak pişirme işlemi yapılır.
4. Alev üzerine içi boş tencere konulmalıdır.
5. Pişirme işlemi tamamlandıktan sonra tencere ocak üzerinden alınmalıdır.
6.Cihazın kapatılması:
Cihazı tamamen kapatmak için emniyet val (A) tam kapalı konuma getirilerek gazın
kesilmesi sağlanır ve cihaz kapatılır.Cihaz kapatıldıktan sonra herhangi bir tehlike
olmaması için tüpü de kapatmanız tavsiye edilir
ALEV DENETLEME TERTİBATI:
Eğer herhangi bir kazayla pilotun alevi cihaz açıkken sönerse gaz
kaçağına karşı sistem kendini kapatacaktır. Gazın kesilmesi max.
60 sn sürecektir.
CİHAZIN KULLANIMI
CLEANING AND MAINTENANCE
1. CLEANING:
Clean the exterior of the device with a sponge and liquid cleaning material before and after the
rst use and every following use.
Do not use CHEMICAL CLEANING MATERIALS such as marine acid, cif etc. for cleaning.
Soften and wipe the residues of the burnt food stus with warm water before
getting hardened. If the residue is too hard and has waited for a long time, it has
to be cleaned with a wooden scraper or stainless steel wool using soapy or
chlorine-free detergent
In order to clean the plate surface, a piece of ice is placed on the plate surface after the frying
operation is over. While the ice is melting, it will melt the top of the plate as well.
2. MAINTENANCE:
The periodical maintenance has to be applied by a technical sta member. We recommend that
maintenance is applied on a semi-annually basis at maximum depending on frequency of use of
the device. Maintenance of the device by our authorized service sta members shall be charged
even within the term of the warranty. You can clean the device more easily by placing ice onto
the cooktop when the device is hot following frying.
The following issues have to be taken into consideration:
a. Injectors: The entire injector hole has to be clean.
b. Air control ring: It has to be clean and unblocked. Adjustment of the air mixer should by all
means be done by a technical service sta member.
c. Pilot: The ame has to be stable and has to be in contact with the thermocouple.
d. Burner: The channels and the holes through which the gas passes have to be clean and
unblocked.
e. The parts to be disassembled during cleaning and to be assembled again have to be installed
by the authorized technical service personnel and then any gas leakage should by all means be
checked again using soap bubble method
The following issues have to be taken into consideration:
a. Injectors: The entire injector hole has to be clean.
b. Air control ring: It has to be clean and unblocked. Adjustment of the air mixer should by
all means be done by a technical service sta member.
c. Pilot: The ame has to be stable and has to be in contact with the thermocouple.
d. Burner: The channels and the holes through which the gas passes have to be clean and
unblocked.
TEMİZLİK VE BAKIM
Cihaz ilk kullanımdan ve daha sonraki her kullanımdan önce ve sonra pleyt sacından
başlanarak komple dış yüzeyini, yağ kanalını, yağ borusu ve yağ haznesini sünger ve
sıvı temizlik malzemesi ile temizleyiniz . Bu temizlikten sonra cihazın pleyt yüzeyi
kullanım yağı ile ince bir lm tabakası şeklinde yağlanmalıdır. Cihaz kullanılmadığı
zamanlarda pleyt yüzeyi paslanmaya karşı kullanım yağı ile yağlanmış halde
bırakılmalıdır. Kullanım yağı, gıda tüzüğüne uygun bitkisel
yağlar olmalıdır. Cihaz kullanımdan sonra yüzeydeki yanmış yağın kesinlikle
temizlenmesi gerekir. Temizlenmemiş yağlar koku yapabilir, bakteri barındırabilir, gıda
atıkları ile beraber yağ tahliye borusunu tıkayabilir. Temizlik esnasında tuz ruhu, cif v.b.
gibi KİMYASAL MADDELERİNİ KULLANMAYINIZ.
Yanan yemek maddelerinden kalan atıkları sertleşmeden evvel sıcak su ile
yumuşatıp siliniz.Kalıntı çok sertse ve beklemişse, ağaç bir kazıyıcı ile yada
paslanmaz çelik yün ile sabunlu veya klorsuz deterjan kullanılarak
temizlenmelidir.
2. BAKIM :
Bu periyodik bakımın, teknik bir eleman tarafından yapılması gerekmektedir.Cihazın
kullanım sıklığına bağlı olarak max. 6 ayda bir bakım yapılmasını öneririz. Garanti süresi
içinde olsa da, cihazın yetkili servis elemanlarımız tarafından bakımı ücrete tabiidir.
Aşağıdaki hususlara dikkat edilmelidir.
a. Enjektörler: Enjektör deliği tamamen temiz olmalıdır.
b. Hava ayar bileziği: Temiz ve tıkalı olmamalıdır. Hava karıştırıcısının ayarını mutlaka
teknik servis elamanı tarafından yapılmalıdır.
c. Pilot: Alev düzgün ve termokupula temas etmelidir.
d. Brülör: Gazın geçtiği yollar ve delikler temiz ve tıkalı olmamalıdır.
e. Temizlik esnasında çıkartılması gereken ve sonra tekrar takılması gereken parçalar
teknik servis elamanı tarafından yerlerine monte edilmeli ve montajdan sonra mutlaka
gaz kaçağı sabun köpüğü yöntemiyle tekrar kontrol edilmelidir.
TERMS OF WARRANTY
CAUTION
At buildings, plants and similar locations to which the device will be connected, the installation
shall be in accordance with the regulation on electricity interior installations published in the
official gazette dated 4/11/1984 and numbered 18565 and all measures have to be taken for
providing security of life and property. OTHERWISE, OUR COMPANY SHALL NOT ACCEPT ANY
LIABILITIES.
1- The documents without sales date, plant and selling company conrmation on them shall be invalid. The
warranty deed shall be presented for gaining bene,t from the terms of the warranty. The device has been
warranted against breakdowns to stem from material and workmanship defects on condition that it is
assembled and used according to the instruction book on assembly, use and maintenance. Establishment
way of elimination and designation of the exact place of the breakdeowns within the scope of the warranty
shall be assumed by KAYALAR.
2- The warranty given shall solely apply for the warrented device if the instruction book on assembly, use
and maintenance and the terms of warranty are abided by ; no right or compensation may be claimed by
any means other than this.
3- if any scrapings, erasures or changes are done on the information indicating the type, the model and
serial numbers of the device in the deed of warranty or on the warranted device, the warranty shall be
inmvalid.
4- The warranty solely consists of material and relationship defects to arise during applicable times and
maintenance and repair of the relevant berakdowns. The breakdowns and the parts within the scope of
thew warranty shall be repaired and replaced free of charge. Ownership of the parts replaced shall be held
by KAYALAR
5- Solely the serivce sta members authorized by the KAYALAR can intervene in the breakdowns during the
term of the scope of the warranty. Intervention of unauthorized people shall make the device out of the
scope of the warranty.
6- Assembly has to be made by authorized service personel and information has to be given to the service
in case of change of the place of use of the device.
7-In case of any breakdowns during the use, information has to be given to the authorized service.
8- Elimination of damages and breakdowns to arise during loading ,unloading and shipment operations
out of responsibility of KAYALAR shall be deemed out of the scope of the warranty. Likewise, elimination of
damages and breakdowns to arise due to exterior factors during use of the deviceshall be out of the scope
of the warranty as well.
9- In case of any disputes , Istanbul Courts shall be the competent bodies.
GARANTİ ŞARTLARI
1- Üzerinde satış tarihi, fabrika ve satıcı rma onayı olmayan belgeler geçersizdir.
Garantiden yararlanmak için garanti belgesi gösterilmelidir.
2- Cihaz; montaj, kullanım, bakımkılavuzunda açıklandığı şekilde monte edilip kullanılması
kaydı ile malzeme ve işçilik kusurlarından doğabilecek arızalara karşı garanti edilmiştir.
3- Garanti kapsamına giren arızaların tayini, giderilme şekli ve yerinin belirlenmesi
KAYALAR’a aittir.
4-Verilen garanti; montaj, kullanım ve bakımkılavuzuna ve garanti şartlarına uyulması
halinde yalnızca garanti edilen cihaza ait olup, bunun dışında herhangi bir ad altında hak
veya tazminat talep edilemez.
5-Garanti belgesindeki veya garanti edilen cihaz üzerindeki cihazın cinsi, modeli ve seri
numaralarını gösteren bilgiler üzerinde kazıntı, silinti veya değişiklik yapıldığı taktirde
garanti ortadan kalkar.
6- Garanti yalnız geçerli süreler içerisinde oluşabilecek malzeme ve işçilik kusurları ile ilgili
arızalara karşı bakım ve onarımı içerir. Garanti kapsamındaki arıza ve parçalar bedelsiz
onarılır ve değiştirilir. Yenisi takılan parçalar KAYALAR’a aittir.
7- Garanti kapsamı süresince arızalara yalnız KAYALAR’IN yetkili kıldığı servis elemanları
müdahale edebilir. Yetkisiz kişilerin müdahalesi cihazı garanti dışı bırakır.
8- Montaj yetkili servis elemanlarınca yapılmalıdır ve cihazın kullanım yerinin değiştirilmesi
durumunda servise haber verilmelidir.
9- Kullanımsırasında herhangi bir arıza oluşması durumunda yetkili servise haber
verilmelidir.
10- KAYALAR sorumluluğu dışındaki yükleme, boşaltma ve sevkiyat işlemi sırasında
oluşacak hasar ve arızaların giderilmesi, garanti dışı işlem görür. Aynı şekilde cihazın
kullanımı sırasında harici faktörlerle verilecek hasar ve arızaların giderilmesi garanti dışıdır.
11-Anlaşmazlık durumunda İstanbul Mahkemeleri yetkilidir.
BELGELERİMİZ
ISSUES TO BE PAID ATTENTION BY THE
CUSTOMER IN TERMS OF THE WARRANTY
1
Damages and breakdowns arising from usage errors,
2
Damages and breakdowns arising during loading, unloading and transportation after delivery to the consumer,
3
Damages and breakdowns, which may arise on account of fall of potential or excess potential, unearthing, improper
electricity installation made by people other than our authorized services: usage under voltage other than that written on the
product tag,
4
Breakdowns and damages related to fire and stroke of lightning,
5
Intervention in the part or product with a breakdown, to be subject to destructive synthetic, chemical agents, accidents,
ignorance, use by unqualified people and other usage errors, damages to arise on the exterior of the product after delivery to the
consumer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Kayalar KGKF-8090 Kullanım kılavuzu

Tip
Kullanım kılavuzu
Bu kılavuz için de uygundur

Diğer dillerde