Yamaha RX-V1067 El kitabı

Kategori
AV alıcıları
Tip
El kitabı
Owner’s Manual
AV Receiver English for Europe
En 2
BEFORE USE
About this manual
Supplied accessories
Check that you received all of the following parts.
Remote control
Batteries (AAA, R03, UM-4) x 2
Power cable
YPAO microphone
AM loop antenna
Indoor FM antenna
Language selection
This procedure allows you to select the language of
menus and messages on the TV screen.
1
Press jON SCREEN to display the ON
SCREEN menu.
2
Press kCursor B / C to select “Setup” and
press kENTER.
3
Press kCursor D / E to select the
“Language” and press kENTER.
4
Press kCursor B / C to select the favorite
language from the following options.
5
Press jON SCREEN to close the ON
SCREEN menu.
jON SCREEN
kCursor B / C / D / E
kENTER
ENTER
ON SCREEN
SCEN
E
VO
L
U
ME
MUTE
ENHANCE
R
SU
R. DE
CO
D
E
STRAIGH
T
PURE DIRECT
MOVI
E
MUSI
C
SLEE
P
ARTY
FM
INFO
M
EMORY
AM
PRESE
T
AUDI
O
AV
1
2
3
4
7
5
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
T
OP
MENU
P
OP-U
P
MENU
SOU
R
C
E
MAIN
Z
O
NE 2
RE
C
EIVER
CODE SET
INPUT
MU
T
E
D
OCK
HDMI
O
UT
MULTI
1
2
3
4
6
V-AU
X
U
SB
NET
TUNER
P
HON
O
TUNING
O
PTIO
N
1
1
2
2
3
3
4
4
BD
/
DVD
BD/DVD
TV
TV
CD
CD
RADI
O
RADIO
RETURN
D
ISPLAY
k
j
Some features are not available in certain regions.
This manual is created prior to production. Design and
specifications are subject to change in part as a result
of improvements, etc. In case of differences between
the manual and product, the product has priority.
jON SCREEN” (example) indicates the name of
the parts on the remote control. Refer to the “Remote
control” (
p. 12) for the information about each
position of the parts.
J
1 indicates that the reference is in the footnote.
Refer to the corresponding numbers on the bottom of
the page.
indicates the page describing the related
information.
Click on the “ ” at the bottom of the page to
display the corresponding page in “Part names and
functions.
Front panel
Rear panel
Front panel display
Remote control
English (English), (Japanese),
(French), (German), (Spanish),
(Russian)
En 3
CONTENTS
INTRODUCTION
Features and capabilities...................................................5
Using the TV OSD to operate the unit .............................6
Basic operation of OSD menu..........................................6
Viewing or modifying content
for the current input source <Content window>...............6
Configuring settings for this unit
<ON SCREEN menu>......................................................6
Adjust settings for each input source
<Option menu>.................................................................7
Part names and functions..................................................8
Front panel........................................................................8
Front panel with the cover opened ...................................9
Rear panel.......................................................................10
Front panel display .........................................................11
Remote control ...............................................................12
Remote control (sequel) .................................................13
On-screen display ...........................................................14
CONNECTIONS
Connecting speakers........................................................15
Speaker channels and functions......................................15
Speaker layout ................................................................16
Connecting speakers and subwoofers.............................19
Advanced speaker configuration ....................................22
Speaker layout utilizing an external power amplifier.....22
Connecting an external amplifier ...................................22
Connecting external components....................................23
Jacks and cables..............................................................23
Connecting a TV monitor...............................................24
Connecting BD/DVD players and other devices............27
Connecting game consoles or video camcorders............32
Connecting a multi-format player
or an external decoder ....................................................32
Connecting a SCENE link
playback-compatible device ...........................................33
Using the Trigger function to link external component
power.............................................................................. 33
Connecting audio/video recording devices .................... 34
Connecting to the network ............................................. 34
Connecting a USB storage device.................................. 35
Connecting the FM/AM antennas.................................. 36
Setting up the speaker parameters automatically
(YPAO).............................................................................. 37
PLAYBACK
Basic playback procedure ............................................... 44
Changing input settings with a single key
(SCENE function)............................................................ 46
Selecting the SCENE suitable
for the external component............................................. 46
Enjoying favorite sound field effect ............................... 47
Selecting sound programs and sound decoders.............. 47
Enjoying spatial sound
with the CINEMA DSP function ................................... 47
Enjoying unprocessed playback
(Straight decoding mode)............................................... 48
Enjoying Hi-Fi Sound Quality (Pure Direct Mode) ....... 49
Enjoying stereo playback ............................................... 49
Enjoying compressed music source with better sound
quality (Compressed Music Enhancer) .......................... 49
Sound programs.............................................................. 50
Controlling this unit while viewing the TV screen ....... 52
Basic operations via the TV screen display ................... 52
Configuring settings specific
to an individual input source (Option menu)................ 54
Option menu display and setup ...................................... 54
Option menu................................................................... 55
Confirming and operating input sources from the
content window ................................................................ 58
Displaying the content window on the TV screen ......... 58
Switching the display between the Now Playing view
and the Browse view ...................................................... 58
FM/AM tuning................................................................. 59
Selecting a frequency for reception (Normal tuning) .... 59
Radio Data System tuning ............................................. 60
Navigating the FM/AM tuner
from the content window ............................................... 62
Playing back tunes on the PC......................................... 64
Windows Media Player setup......................................... 64
Playback of PC music contents...................................... 64
Playing back tunes on the USB storage devices............ 66
Playback of the USB storage device.............................. 66
Listening to the Internet Radio ...................................... 68
Listening to Internet Radio ............................................ 68
Using shortcut function................................................... 70
Playing back tunes from your iPod™/iPhone™........... 71
Connecting the Universal Dock for iPod ....................... 71
Controlling an iPod™/iPhone™ .................................... 71
Playing iPod™/iPhone™ from the menu screen
(Menu browse control)................................................... 72
Operating basic playback functions
via the remote control (Simple remote control)............. 73
Playing iPod™/iPhone™ with wireless connection ...... 73
Playing back tunes from Bluetooth™ components ...... 75
Connecting a Yamaha Bluetooth Wireless Audio
Receiver.......................................................................... 75
Pairing Bluetooth™ components................................... 75
Using Bluetooth™ components..................................... 76
Controlling this unit by using the Web browser
(Web Control Center)...................................................... 77
Displaying and Operating Web Control Center ............. 77
En 4
SETUP
Configuring input sources (Input menu) .......................79
Configuring input sources ..............................................79
Input menu......................................................................80
Editing the SCENE function (Scene menu)...................82
Editing a scene................................................................82
Scene menu.....................................................................83
Simple registering as the SCENE...................................84
Setting sound program parameters
(Sound Program menu)...................................................85
Editing sound programs..................................................85
CINEMA DSP parameters .............................................86
Parameters usable in certain sound programs ................88
Parameters usable in surround decoder..........................89
Setting various functions (Setup menu) .........................90
Operating the Setup menu ..............................................90
Setup menu .....................................................................91
Manages settings for speakers ........................................91
Setting the audio output function of this unit .................95
Setting this unit’s video output function.........................97
Setting HDMI functions .................................................98
Adjusting this unit’s network parameters.....................100
Setting this unit’s multi-zone function .........................101
Making the receiver easier to use .................................102
Language ......................................................................105
Confirming information of this unit
(Information menu) .......................................................106
Selecting information ...................................................106
Controlling the remote control to operate various
functions..........................................................................108
Keys connecting external components .........................108
Default remote control code settings............................108
Registering remote control codes
for external component operations ...............................109
Programming from other remote controls....................110
Resetting all remote control codes ...............................113
Extended functionality that can be configured
as needed (Advanced Setup menu)............................... 114
Displaying/Setting the Advanced Setup menu............. 114
Setting the impedance of speakers ............................... 114
Remote sensor .............................................................. 115
Avoiding crossing remote control signals
when using multiple Yamaha receivers........................ 115
Changing TV format .................................................... 116
Removing HDMI video output up-scaling limits......... 116
Recovery and backup of the system settings................ 116
Initializing various settings for this unit....................... 116
Firmware update........................................................... 117
Firmware version.......................................................... 117
Using the HDMI Control function ............................... 118
Enjoying the contents in another room ....................... 122
Connecting Zone2 ........................................................ 122
Controlling Zone2 ........................................................ 124
Enjoying the music in all rooms................................... 124
APPENDIX
Troubleshooting ............................................................. 125
General ......................................................................... 125
HDMI™ ....................................................................... 127
Tuner (FM/AM) ........................................................... 128
USB and Network ........................................................ 129
iPod™/iPhone™ .......................................................... 130
Bluetooth™ .................................................................. 131
Remote control ............................................................. 131
Glossary .......................................................................... 133
Audio information........................................................ 133
Sound program information ......................................... 134
Video information ........................................................ 135
Compatibility of the input
and output video signals............................................... 135
Information on HDMI™............................................... 136
About trademarks ......................................................... 137
Specifications.................................................................. 138
Index ............................................................................... 140
En 5
INTRODUCTION
Built-in high-quality, high-power 7-channel amplifier
Multi-channel speaker configuration capability
2- to 7.1-channel speaker configurations .................................................................................................16
Presence speaker connections for playback with a richer sound field effect...........................................19
Bi-amplification connections for high-quality playback .........................................................................20
External amplifier connections for high-quality playback and expansion of channels ...........................22
Speaker impedance configuration............................................................................................................20
HDMI compatibility
8 HDMI input jacks (7 on the rear, 1 on the front) supporting 3D video signal input ............................27
2 selectable HDMI output jacks supporting Audio Return Channel and 3D video signal ......................25
Automatic setup for speaker acoustic parameters
(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................37
Extensive inputs (max. 13) for external playback components
BD/DVD/CD player connection ..............................................................................................................27
Game console / video camcorder connection ..........................................................................................32
Multi-format player / external decoder connection .................................................................................32
iPod/iPhone wired connection .................................................................................................................71
iPod/iPhone wireless connection .............................................................................................................73
Bluetooth component connection ............................................................................................................75
1-button input/sound program/setting switching (SCENE function)...................46
Built-in sound programs and surround decoders for playback variety of sources
Spatial sound playback with sound field effects (CINEMA DSP) ..........................................................47
Playback with no sound field effects (straight decoding)........................................................................48
High-fidelity sound playback (Pure Direct).............................................................................................49
Enhanced sound playback for compressed sources (Compressed Music Enhancer)...............................49
Tuner playback
FM/AM broadcast....................................................................................................................................59
Radio Data System tuning .......................................................................................................................60
Playback and control via network
Playback of music on the PC and DLNA server......................................................................................64
Internet radio service playback ................................................................................................................68
Control this unit via network (Web Browser Control).............................................................................77
Playback of music on the USB storage devices ................................................... 66
Sophisticated on-screen display (OSD) for easy operation
Selection of input sources, scenes, and sound programs.........................................................................52
Navigation for the current input source (content window)......................................................................58
Setup for this unit (ON SCREEN menu).................................................................................................79
Setup for each input source (Option menu).............................................................................................54
Customizable remote control
Remote control code setup for operation of external components ........................................................108
Learning function from other remote controls.......................................................................................110
Multi-room listening capability (Zone2) ............................................................... 122
Features and capabilities
Most of functions can be operated with on-screen display on the TV screen. Refer to “Using the TV
OSD to operate the unit” on the following pages for information on functions that can be controlled
using the on-screen display.
INTRODUCTION
En 6
This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and
Option menus, as well as the content window that displays the content of current input sources.
Basic operation of OSD menu
Select an input source, scene and sound program
Select an input source ..............................................................................................................................52
Select a scene ...........................................................................................................................................52
Select a sound program............................................................................................................................53
Select a language
Change the language displayed on the TV screen <Language>............................................................105
Viewing or modifying content for the current input source
<Content window>
Operate the FM/AM tuner
Display preset stations for selection ........................................................................................................62
Display information on the station currently received.............................................................................62
Perform operations such as searching for and registering stations using the screen buttons ..................62
Operate the Internet radio
Display information on the station currently received.............................................................................68
Play back the radio contents ....................................................................................................................68
Bookmark Internet radio stations.............................................................................................................68
Operate the iPod music sources
Display the list of iPod music sources for selection ................................................................................72
Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............72
Configuring settings for this unit <ON SCREEN menu>
Configure an input source
Change the input source name <Rename/Icon Select> ...........................................................................80
Specify a format for digital audio signals <Decoder Mode> ..................................................................81
Enhance the sound of compressed audio <Enhancer> ............................................................................81
Output a video signal input from another input source
while playing a multi-channel audio signal <Video Out> .......................................................................81
Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................81
Play the music sources on PC with the external control <DMC Control>..............................................81
Customize a scene
Register or clear settings for a selected scene <Save>, <Load>, <Reset> ........................................83, 84
Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically
when a scene is selected <SCENE IR> ...................................................................................................83
Changing a scene name and icon <Rename/Icon Select> .......................................................................84
Adjust a sound program (sound program)
Adjust sound program parameters...........................................................................................................85
Display settings information for this unit
Display audio signal information <Audio Signal>................................................................................106
Display video signal information <Video Signal> ................................................................................106
Display HDMI signal information <HDMI Monitor>...........................................................................106
Display network information <Network>..............................................................................................107
Display system information <System>..................................................................................................107
Display Zone information <Zone> ........................................................................................................107
Using the TV OSD to operate the unit
Continues to the
next page
INTRODUCTION
Using the TV OSD to operate the unit
En 7
Adjust acoustic parameters to match your speakers and listening environment
Specify speaker acoustic parameters automatically
(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................37
Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................92
Specify settings for each speaker <Configuration>.................................................................................92
Control volume control for each speaker <Level> ..................................................................................94
Apply speaker distance settings <Distance> ...........................................................................................94
Control equalizer sound quality <Parametric EQ>..................................................................................94
Adjust test tone speaker <Test Tone> ......................................................................................................95
Adjust audio signals output from this unit
Correct lag between audio and video signals <Lipsync> ........................................................................95
Select a dynamic range adjustment method <Dynamic Range> .............................................................96
Specify the maximum volume <Max Volume>.......................................................................................96
Specify the initial volume <Initial Volume>............................................................................................96
Restrict the video signals during the Pure Direct Mode <Pure Direct Mode> ........................................96
Adjust DSP effect and volume level <Adaptive DSP Level>..................................................................96
Adjust video signals output from this unit
Convert analog video signal to another type of signal <Analog to Analog Conversion> .......................97
Specify the resolution and aspect ratio of output video signals <Processing>........................................97
HDMI settings
Assign the audio input source for the TV <TV Audio Input>.................................................................99
Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>..............................98
Transmit HDMI audio/video to the TV during standby mode <Standby Through> ...............................99
Change the output destination of HDMI input audio signals <Audio Output>.......................................99
Network settings
Set the IP address of this unit <IP Address> .........................................................................................100
Accept the commands via LAN network when this unit is in the standby mode
<Network Standby>...............................................................................................................................100
Set the mac address filter for this unit <MAC Address Filter> .............................................................100
Enable listening in multiple rooms (multi-zone function)
Adjust Zone2 volume <Zone2 Set>.......................................................................................................101
Display the Zone2 menu on the TV <Monitor Out Assign> .................................................................101
Rename each zone or scene <Zone2 Scene Rename/Zone Rename> ...................................................102
Specify other functions for this unit
Enter standby mode automatically when no operations are performed <Auto Power Down> .............103
Assign the other input to the selected input source <Input Assignment> .............................................103
Adjust the brightness of the front panel display <Dimmer> .................................................................104
Change the wall paper displayed on the TV screen <Wall Paper>........................................................104
Specify the function of the TRIGGER OUT jack for controlling external components
<Trigger Output1/Trigger Output2>......................................................................................................104
Prohibit changes to settings <Memory Guard> .....................................................................................105
Adjust settings for each input source <Option menu>
Adjust bass and treble levels <Tone Control> .........................................................................................56
Enable low-volume background music <Adaptive DRC> ......................................................................56
Enjoying more spatial sound fields <CINEMA DSP 3D Mode>............................................................56
Adjust the vertical position of dialogues <Dialogue Lift> ......................................................................56
Select the 5.1-channel signal playback method <Extended Surround> ..................................................56
Adjust the volume of input sources <Volume Trim>...............................................................................57
Selecting audio input jacks <Audio Select>............................................................................................57
Automatically search for and receive a traffic station <Traffic Program> ..............................................57
Shuffle or repeat the song <Shuffle/Repeat>...........................................................................................57
Connect / Disconnect Bluetooth component to this unit <Connect/Disconnect> ...................................57
Pairing Bluetooth component with this unit <Pairing> ...........................................................................57
INTRODUCTION
En 8
Front panel
a MAIN ZONE A (Power)
Switches this unit between on and standby mode.
b HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby
mode.
When the Standby Through function is enabled and audio/video
from an external component connected with HDMI is output to a TV
during standby mode (
p. 99).
When an iPod/iPhone, which is placed in the Universal Dock for
iPod, is charging while the unit is in standby mode (
p. 81).
This indicator also lights up when the Yamaha Wireless System for
iPod is connected to this unit (
p. 73).
c Front panel display
Displays information on this unit (
p. 11).
d PURE DIRECT
Switches this unit to Pure Direct Mode (
p. 49).
e INPUT selector
Selects an input source from which to playback. Rotate this selector to
cycle through the input sources in order.
f VOLUME
Adjusts the volume level.
Part names and functions
Opening and closing the front panel door
To use controls or jacks behind the front panel door, gently press
the bottom of the door to open it. Keep the door closed when not
using controls or jacks behind the front panel door.
Continues to the
next page
a
e f
c db
En 9
INTRODUCTION
Part names and functions
Front panel with the cover opened
g ON SCREEN
Turns on and off the ON SCREEN menu.
h OPTION
Turns on and off the Option menu (
p. 54).
i TONE/BALANCE
Adjusts high-frequency/low-frequency output of speakers/headphones
in each zone (
p. 45, p. 124).
Adjusts the balance of the volume of the left and right channels in
Zone2 (
p. 124).
j STRAIGHT
Changes a sound program to straight decoding mode (
p. 48).
k PROGRAM l / h
Selects a sound program (
p. 47). Press the left or right key
repeatedly to cycle through sound programs.
l SCENE
Switches the input source, the sound program, and the HDMI OUT
with a single button (
p. 46, p. 82). When this unit is in standby
mode, press this key to switch on.
m MULTI ZONE
ZONE2
Switches to enable/disable the audio and video output to Zone2
(
p. 101, p. 122).
ZONE CONTROLS
Switches to Zone2 operation mode. This unit, or its remote control,
can be used to select input sources or adjust volume for an external
amplifier in another room or the built-in amplifier for speakers in
another room (
p. 124).
n INFO
Changes the information displayed on the front panel display
(
p. 11).
o MEMORY
Registers FM/AM stations as preset stations (
p. 59). J1
p FM/AM
Sets the FM/AM tuner band to FM or AM (
p. 59). J1
q PRESET j / i
Selects an FM/AM preset station (
p. 60). J1
r Cursor B / C / D / E, ENTER, RETURN
s USB port
For connecting a USB memory device or USB portable audio player
(
p. 35).
t DISPLAY
Switches the display between the Now Playing view and the Browse view.
u YPAO MIC jack
Connect the supplied YPAO microphone and adjust the speaker
balance automatically (
p. 37).
v PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
w VIDEO AUX jacks
For connecting game consoles to this unit temporarily (
p. 32).
x TUNING/CH jj / ii
Changes FM/AM tuner frequencies (
p. 59). J1
Cursor B / C / D / E Select menu items and change settings when
menus, etc., are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when menus are
displayed, or close the menu.
n
r
xt w
k
mg li onjh p
vus
q
J
1 : Usable when you have selected TUNER input.
En 10
INTRODUCTION
Part names and functions
Rear panel
a PHONO jacks
For connecting a turntable (
p. 31).
b DOCK jack
For connecting an optional Universal Dock for iPod (such as YDS-
12), Wireless System for iPod (YID-W10), or Bluetooth Wireless
Audio Receiver (YBA-10) (
p. 71, p. 73, p. 75).
c NETWORK port
For connecting to the network (
p. 34).
d HDMI OUT 1-2 jacks
For connecting an HDMI - compatible TV to output audio/video
signals (
p. 25).
e MON.OUT/ZONE OUT jacks (S-VIDEO/VIDEO jacks)
For connecting a TV capable of receiving video input, and outputting
video signals to it (
p. 25, p. 26).
f COMPONENT VIDEO jacks
For connecting external components equipped component video-
compatible outputs to receive video signals (
p. 28).
g HDMI input jacks
For connecting external components equipped with HDMI-
compatible outputs to receive audio/video signals (
p. 27).
h MONITOR OUT/ZONE OUT jacks (COMPONENT VIDEO
jacks)
For connecting TV that are compatible with component video signals,
using three cables to output video signal (
p. 25).
i REMOTE IN/OUT jacks
For connecting an external component that supports the remote
control function (
p. 33).
j TRIGGER OUT 1-2 jack
For connecting an external component that supports the trigger
function to operate it linked with operation of this unit (
p. 33).
k RS-232C terminal
This is a control expansion terminal for custom installation. Consult
your dealer for details.
l AV1-4 jacks
For connecting to external components equipped with audio/video
outputs to receive audio/video signals (
p. 28).
m ANTENNA jacks
For connecting AM and FM antennas (
p. 36).
n AV OUT jacks
For outputting audio/video signals received when analog inputs are
selected (
p. 34).
o AUDIO1-4 jacks
For connecting external components equipped with audio outputs to
receive audio signals (
p. 31).
p MULTI CH INPUT jacks
For connecting a player that supports a multi-channel output
(
p. 32).
q ZONE OUT jacks
Outputs sound of this unit to an external amplifier set in a different
room. (
p. 122).
r PRE OUT terminals
For connecting a subwoofer with built-in amplifier or an external
power amplifier (
p. 21, p. 22).
s SPEAKERS terminals
For connecting the front, center, surround and surround back speakers
(
p. 19). Connect the presence speakers (p. 19) or the speakers for
Zone2 (
p. 18) to the EXTRA SP jacks.
t AC IN
For connecting the supplied power cable.
HDMI OUT
12
ZONE OUT PRE OUT
ZONE 2
AV OU T
YP
B
P
R
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
2
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
FRONT
(SINGLE)
SU
RR
OU
ND
SU
RR
OU
ND BA
C
K
/
S
PEAKER
S
C
ENTE
R
AV 1
AV 2
AV
3
AV 4
HDMI
AV
5
AV
6
AV 7
S
IN
G
L
E
FR
O
BI
-
AMP
4
AV
3
A
V 4
T
ICAL
O
PTICA
L
AU
DI
O
1
(
2 TV
)
(3 CD)
A
U
DI
O
2 A
U
DI
O
3
AU
DI
O
4
FRON
T
SURROUND
SUR. BAC
K
S
UBWOOFE
R
C
ENTER
M
U
LTI
C
H INP
UT
CO
MP
O
NENT VIDE
O
C
OAXIA
L
Y
P
B
P
R
Y
P
B
P
R
C
D
(
1 BD/DVD
)
AV 1
A
V 2
B
A
Ԝ
ԝ
IN
OUT
R
EM
O
TE
Distinguishing the input and output jacks
The area around the audio/video output jacks is marked
in white to prevent connection errors. Use these jacks to
output audio/video signals to a TV or other external
component.
Output jacks
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
12
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDIO 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
AV OUT
YP
B
P
R
YP
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
2
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
FRONT
(1 BD/DVD)
AV 1
AV 2
B
A
ԘԙԚԛ Ԝԝ
(SINGLE)
ZONE2/
F.PRESENCE
EXTRA SP
ANTENNA
75
GND
AM
(4 RADIO)
IN
OUT
REMOTE
bad g kjf
sl nmt
c
e h i
o p q r
En 11
INTRODUCTION
Part names and functions
Front panel display
a Tuner indicator
Light up according to the status of a received station (
p. 59).
b ZONE2 indicator
Lights up when the audio and video output to Zone2 is enabled
(
p. 124).
c SLEEP indicator
Blinks when the sleep timer is on (
p. 12, p. 124).
d PARTY indicator
Lights up when the party mode is active (
p. 101).
e Multi information display
Displays a range of information on menu items and settings.
f VOLUME indicator
Displays the current volume level.
g HDMI indicator
Lights up during normal HDMI communication.
IN indicator
Lights up when this unit detects the external component connected to
the HDMI input jack (
p. 27).
OUT 1/OUT 2 indicators
Indicate which HDMI OUT jack outputs audio/video signals
(
p. 25).
h ENHANCER indicator
Lights up when the Compressed Music Enhancer is active (
p. 49).
i CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
j CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated (
p. 48).
k Cursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
l MUTE indicator
Blinks when audio is muted.
m Speaker indicators
Indicate speaker terminals from which signals are output.
n ADAPTIVE DRC indicator
Lights up when the adaptive dynamic range control feature is tuned on
(
p. 56).
Surround speaker L
Subwoofer 1
Surround speaker R
Center speaker
Surround back
speaker L
Surround back
speaker R
Surround back
speaker J1
Presence speaker L Presence speaker
R
Front speaker L Front speaker R
Subwoofer 2
Switching information on the front panel display
The front panel can display sound programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through displayed
informations. J2
VOLUME
AV1

Standard
Input source name
Sound program (DSP program)
STEREO
TUNED
PARTY
ENHANCER
SLEEP
MUTE
VOLUME
ADAPTIVE
DRC
a be fc
ihj mknlgk
d
J
1 : “SB” is displayed when using a 6.1-channel configuration only.
J
2 : During FM/AM reception, the frequency is displayed instead of the input source.
En 12
INTRODUCTION
Part names and functions
Remote control
a Remote control signal transmitter
Transmits infrared signals.
b MAIN/ZONE2
Switches the zone to be operated by the remote control between the
Main zone and Zone2 (
p. 124).
c SOURCE A (SOURCE Power)
Switches an external component on and off.
d Input selector
Select an input source on this unit from which to playback.
e Radio control keys
Operates the FM/AM tuner. These keys are used when using the tuner
input.
f INFO
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound program, the
surround decoder, the FM/AM tuner frequency, etc.).
g SLEEP
Switches this unit to standby mode automatically after a specified
period of time has elapsed (sleep timer). Press this key repeatedly to
set the time for the sleep timer function.
The SLEEP indicator lights up when the sleep timer is on.
h PARTY
Switches the party mode on and off (
p. 124).
i SCENE
Switch the input source and the sound program with a single button
(
p. 46). When this unit is in standby mode, press this key to switch on.
j ON SCREEN
Turns on and off the ON SCREEN menu.
SCENE
VOLUME
ENHANCER
SUR. DECODE
STRAIGHTSLEEP PURE DIRECT
AV
AUDIO
1234
75
FM
INFO
MEMORY
AM
PRESET
PART Y
MOVIE MUSIC
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
SOURCE
MAIN
ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1234
6
V-AUX
USB
NET
TUNER
PHONO
TUNING
ON SCREEN OPTION
1
2
3
4
BD/DVD
TV
CD
RADIO
1
2
3
4
BD/DVD
TV
CD
RADIO
RETURN
DISPLAY
a
c
b
e
i
j
f
g
h
d
AV1-7 AV1-7 jacks
V-AUX Front panel VIDEO AUX jacks
AUDIO1-4 AUDIO1-4 jacks
USB A USB storage device connected to the USB port.
NET Internet radio, a USB connected to the USB port,
or a PC connected to the NETWORK port.
MULTI MULTI CH INPUT jacks
DOCK A Universal Dock for iPod, Wireless System for
iPod, or Bluetooth Wireless Audio Receiver
connected to the DOCK jack.
TUNER FM/AM tuner
PHONO PHONO jacks
FM Sets the FM/AM tuner band to FM.
AM Sets the FM/AM tuner band to AM.
MEMORY Presets radio stations.
PRESET F / G Selects a preset stations when the FM/AM.
TUNING H / I Changes tuning frequencies.
120min. 90min.
60min.30min.Off
Installing batteries in the remote control
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert four AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Replace the batteries with new ones if the remote control can
only be operated within a narrow range.
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than 2 minutes, or leaving exhausted batteries in the remote
control, may clear the remote control codes. If this should occur,
replace the batteries with new ones, and set the remote control
codes.
a
c
b
Battery compartment
cover
Battery compartment
Continues to the
next page
En 13
INTRODUCTION
Part names and functions
Remote control (sequel)
k Cursor B / C / D / E, ENTER, RETURN
l External component operation keys
Operate recording, playback, and menu displays etc. for external
components (
p. 108). J1
m Numeric keys
Enter numbers.
n TV control keys
Operate a monitor such as a TV.
o CODE SET
Sets remote control codes for external component operations
(
p. 109).
p SOURCE/RECEIVER
Switches remote control key function to operate this unit or an
external component (
p. 108). Operate an external component when
this key glows green, or this unit when this key glows orange.
q RECEIVER A (RECEIVER Power)
Switches this unit between on and standby mode.
r HDMI OUT
Switches the output jack connected to an HDMI compatible TV
(
p. 44).
s Sound selection keys
Switch between the sound field effect (sound program) you are using
and the surround decoder (
p. 47).
t OPTION
Turns on and off the Option menu (
p. 54).
u VOLUME +/-
Adjust the volume level (
p. 44).
v MUTE
Turns the mute function of the sound output on and off (
p. 44).
SCENE
VOLUME
ENHANCER
SUR. DECODE
STRAIGHTSLEEP PURE DIRECT
AV
AUDIO
1234
75
FM
INFO
MEMORY
AM
PRESET
PART Y
MOVIE MUSIC
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
SOURCE
MAIN
ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1234
6
V-AUX
USB
NET
TUNER
PHONO
TUNING
ON SCREEN OPTION
1
2
3
4
BD/DVD
TV
CD
RADIO
1
2
3
4
BD/DVD
TV
CD
RADIO
RETURN
DISPLAY
t
u
v
m
n
k
l
p
q
r
o
s
Cursor B / C / D / E Select menu items and change settings when
menus, etc, are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when menus are
displayed, or close the menu.
DISPLAY Switches the display between the Now Playing
view and the Browse view.
J
1 : You can use lExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input
in advance if you want to operate external components (
p. 109).
INTRODUCTION
Part names and functions
En 14
On-screen display
When a TV is connected to this unit, the supplied remote control can be used to specify and verify this
unit’s settings via menus and options displayed on the TV screen.
The following displays are available in the on-screen display.
ON SCREEN menu
Press jON SCREEN to display the ON
SCREEN menu.
Detailed settings for this unit can be
configured. Use this menu to select desired
settings, change their values, or check the
current status of this unit.
Refer to “SETUP” (
p. 79) for details.
Option menu
Press tOPTION to display the Option menu.
Configure the optional settings for each input
source. Settings such as “Tone Control” and
“Volume Trim” are applied to this unit
regardless of the input source.
Refer to “Configuring settings specific to an
individual input source (Option menu)”
(
p. 54) for details.
Content window
Press dInput selector to display the content
window.
Includes the Browse view and the Now
Playing view. The Now Playing view displays
the status of the source from which music is
currently played back. Adjust settings for
music content from the Browse view.
Refer to “Confirming and operating input
sources from the content window” (
p. 58)
for details.
En 15
CONNECTIONS
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
Front left and right speakers
The front speakers are used for the front channel sounds (stereo
sound) and effect sounds.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening
position in the front of the room. When using a projector screen,
the appropriate top positions of the speakers are about 1/4 of the
screen from the bottom.
Center speaker
The center speaker is for the center channel sounds (dialog, vocals,
etc.).
Center speaker layout:
Place it halfway between the left and right front speakers. When
using a TV, place the speaker just above or just under the center of
the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Surround left and right speakers
The surround speakers are for effect and vocal sounds when
playing back a 5.1-channel source or higher. If used with no
surround back speaker when playing back a 6.1-channel source or
higher (including a surround back channel), the sound of the
surround back channel is distributed between the left and right
surround speakers.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides
facing the listening position. They should be placed between 60
degrees and 80 degrees from the listening position and with the
speaker tops at a height of 1.5 – 1.8 m from the floor.
Presence left and right speakers
The presence speakers are used for front effect sounds. When used
in combination with the sound programs (
p. 50), a sound with a
richer and more spatial presence is possible.
Presence speaker layout:
Place the left and right presence speakers 0.5 – 1 m to the outside
of the left and right front speakers respectively. The tops of the
presence speakers should be 1.8 m above the floor.
Surround back left and right speakers
The surround back speakers are for rear effect sounds when
playing back a 6.1-channel source or higher. If used with only one
surround back speaker when playing back a 7.1-channel source or
higher, the sound of the left and right surround back channel is
mixed and output from a single speaker.
Surround back speaker layout:
When used with 7.1ch sound, arrange the left and right speakers
towards the listening position, to the rear of the listening position.
Arrange the left and right speakers at least 30 cm apart. The same
separation as with the front left and right speakers is optimum.
When used with 6.1ch sound, arrange these to the rear of the
listening position.
Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency
effect (LFE) sounds included in Dolby Digital and DTS. Use a
subwoofer that is equipped with built-in amplifier.
Subwoofer speaker layout:
Place it to the outside of the front left and right speakers facing
slightly inward to reduce echoes from the wall. You can use one or
two subwoofers.
Connecting speakers
E.g.
E.g.
E.g.
E.g.
E.g.
E.g.
CONNECTIONS
Connecting speakers
En 16
Speaker layout
In addition to the 7.1-channel speaker layout, a variety of speaker configurations can be specified with
presence speaker connection, bi-amp connection or the Zone2 function.
And, this unit is equipped with “Power Amp Assign” function which can easily apply the appropriate
speaker setting to this unit according to your speaker configuration.
Connection of speakers
Connect the speakers to the appropriate jacks shown in the table for each speaker layout. Refer to
“Connecting speakers and subwoofers” (
p. 19) for details on connecting speakers.
You can also use two subwoofers by connecting them to both SUBWOOFER1 and SUBWOOFER2
jacks. In this case, monaural sound of subwoofer channel is output from both speakers.
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate the speakers. Use the Power Amp
Assign function to apply the appropriate settings shown in the table for each speaker layout. Refer to
“Power Amp Assign” (
p. 92) for details on setting.
Enjoying the 7.1 channel audio source
7.1-channel speaker layout (7 speakers + subwoofer)
Connections of speakers
Assigning a speaker configuration
Audio from a 7.1-channel audio source can be played back with no degradation with this speaker
configuration.
FRONT jacks Front L/R speakers SURROUND BACK jacks Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers
Power Amp Assign 7ch Normal (Default)
Front L speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R speaker
Surround back R speaker
Surround back L speaker J1
30 cm or more
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
CONNECTIONS
Connecting speakers
En 17
Adding the presence speakers for a richer sound field effect
Presence speaker layout (7 speakers + subwoofer + presence speakers)
Connections of speakers
Assigning a speaker configuration
Enjoying the audio source without surround back speakers
5.1-channel speaker layout (5 speakers + subwoofer)
Connections of speakers
Assigning a speaker configuration
This unit automatically selects the presence speakers or surround back speakers to output sounds
according to the selected sound program.
When the sound program is changed, the speakers that output the sound are switched between the
presence speakers and surround back speakers automatically. J2
FRONT jacks Front L/R speakers SURROUND BACK jacks Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers EXTRA SP jacks Presence L/R speakers
Power Amp Assign 7ch Normal (Default)
Front L speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R speaker
Presence R speaker
Presence L speaker
Surround back R speaker
Surround back L speaker J1
30 cm or more
This unit can mix 7.1-channel audio source down to 5.1-channel sound. This enables 7.1-channel
sound without surround back speakers.
FRONT jacks Front L/R speakers SURROUND jacks Surround L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
Power Amp Assign 7ch Normal (Default)
Front L speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R speaker
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP
jacks.
CONNECTIONS
Connecting speakers
En 18
Using the front speakers that support bi-amp connections for a
high quality sound
5.1-channel speaker layout (Front speakers (Bi-amp) + 3 speakers)
Connections of speakers
Assigning a speaker configuration
Using speakers in two rooms (Zone2 function)
7.1-channel speaker layout + Zone2 (7 speakers (in main zone) + subwoofer (in
main zone) + front speakers (in secondary zone))
Connections of speakers
Assigning a speaker configuration
Using the front speakers that support bi-amp connections reproduces a high quality sound.
FRONT jacks Front L/R speakers
(bi-amp)
SURROUND BACK jacks Front L/R speakers (bi-amp)
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers
Power Amp Assign 5ch BI-AMP
Front L speaker
(Bi-amp connection)
Front R speaker
(Bi-amp connection)
Center speaker
Surround L speaker
Surround R speaker
Subwoofer
In addition to the main room, speakers in another room can also be controlled.
When the built-in amplifier assigned to speakers in another room is turned on, sound output
automatically switches from the surround back speakers to the speakers in the other room. J2
FRONT jacks Front L/R speakers SURROUND BACK jacks Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers EXTRA SP jacks Zone2 speakers
Power Amp Assign 7ch + 1ZONE
Front L speaker
Front R speaker
Center speaker
Subwoofer
Surround R speaker
Surround L speaker
Surround back L speaker J1
Surround back R
speaker
30 cm or more
Front R speaker
Front L speaker
Main zone Zone2
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP
jacks.
CONNECTIONS
Connecting speakers
En 19
Connecting speakers and subwoofers
Connect your speakers to their respective terminals on the rear panel.
Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs (
p. 50),
sound with a richer and more spatial presence can be created.
CAUTION
Remove the power cable of this unit from the power outlet before connecting the speakers.
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
SURROUND SURROUND BACK/
CENTER
SINGLE
FRONT
BI-AMP
ZONE2/
F.PRESENCE
EXTRA SP
SPEAKERS
AV 2
A
V
3
AV 4
HDMI
A
V
5
AV
6
AV 7
AV
3
AV
4
SU
RR
OU
ND
SU
R. BA
CK
SU
BW
OO
FER
C
ENTER
M
ULTI
C
H INPU
T
CO
MP
O
NENT VIDE
O
M
O
NIT
O
R
OU
T
/
Z
O
NE
OUT
ZONE OU
T
P
RE OU
T
Z
O
NE
2
Y
P
B
P
R
P
R
Y
P
B
P
R
C
D
SU
RR
OU
N
D
SU
R. BA
CK
C
ENTER
SUBWOOFE
R
2
R
S-232
C
2
1
TRI
GG
E
R
OU
T
+12
V
0.1
A
MAX
.
F
R
O
N
T
D/
DVD
)
(SINGLE)
I
N
OUT
REM
O
TE
Subwoofer
Center speaker
Front speaker
Surround
speaker
Surround back
speaker
RL
RL RL
ZONE2/
F.PRESENCE
EXTRA SP
A
C
IN
AV
7
FR
O
N
T
E
NTER
R
S-232
C
2
1
TRI
GG
E
R
OU
T
+
12V 0.1A MAX.
Presence speaker
RL
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
0.5 – 1 m 0.5 – 1 m
PL PR
LR
1.8 m1.8 m
Continues to the
next page
CONNECTIONS
Connecting speakers
En 20
Bi-amp connection
This unit can be connected to speakers that support bi-amp
connections. When connecting speakers, connect the FRONT jacks
and the SURROUND BACK/BI-AMP jacks as in the diagram
below. Configure the bi-amp settings to activate connections.
Multi-zone audio system using the internal
amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks as
in the diagram below.
Changing speaker impedance
This unit is configured for 8 Ω speakers at factory setting.
When connecting to 6 Ω speakers, carry out the following
procedure to switch to 6 Ω. When this unit is configured for 6 Ω
speakers, 4 Ω speakers can also be used as the front speakers.
1
Switch this unit to the standby mode.
2
Press MAIN ZONE A while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu item is
displayed. J1
NOTE
Before making bi-amplification connections, remove any
brackets or cables that connect a woofer with a tweeter. Refer to
the instruction manuals of speakers for details. When not
making bi-amplification connections, make sure that the
brackets or cables are connected before connecting the speaker
cables.
ANTENNA
75
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
12
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDIO 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
AV OUT
YP
B
P
R
YP
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
2
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
FRONT
(1 BD/DVD)
AV 1
AV 2
B
A
ԘԙԚԛ Ԝԝ
(SINGLE)
ZONE2/
F.PRESENCE
EXTRA SP
HD Radio RADIO
GND
AMFM
(4 RADIO)
IN
OUT
REMOTE
FRONT
CENTER
ER
SURROUND BACK/
SPEAKERS
SINGLE
BI-AMP
NE 2
SURROUND
SUR.
FRONT
FRONT
SINGLE
SURROUND BACK/
SPEAKERS
BI-AMP
CAUTION
The EXTRA SP jacks of this unit should not be connected to a
Passive Loudspeaker Selector Box or more than one loudspeaker
per channel.
Connection to a Passive Loudspeaker Selector Box or multiple
speakers per channel could create an abnormally low impedance
load resulting in amplifier damage. See this owner’s manual for
correct usage.
Compliance with minimum speaker impedance information for all
channels must be maintained at all times. This information is found
on the back panel of this unit.
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
12
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDIO 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
AV OUT
YP
B
P
R
YP
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
2
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
FRONT
(1 BD/DVD)
AV 1
AV 2
B
A
ԘԙԚԛ Ԝԝ
(SINGLE)
ZONE2/
F.PRESENCE
EXTRA SP
IN
OUT
REMOTE
ANTENNA
75
GND
AMFM
(4 RADIO)
ZONE2/
F.PRESENCE
EXTRA SP
ZONE2/
F.PRESENCE
EXTRA SP
Zone2
MAIN ZONE A
STRAIGHT
Continues to the
next page
J
1 : Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (
p. 114) for details on the Advanced Setup menu.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153

Yamaha RX-V1067 El kitabı

Kategori
AV alıcıları
Tip
El kitabı