Samsung LE20S52BP Kullanım kılavuzu

LCD TV

LE15S51BP

LE20S52BP

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

Register your product at www.samsung.com/global/register

- AFTER SALES SERVICE

- Do not hesitate to contact your retailer or service agent if a

change in the performance of your product indicates that a faulty

condition may be present.

BN68-00940F-01

BN68-00940F-01Cover.qxd 10/18/05 3:21 PM Page 1

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

åÂ˚ ÔÂ‰ÓÒÚÓÓÊÌÓÒÚË ÔË ‚ÓÒÔÓËÁ‚Â‰ÂÌËË ÌÂÔÓ‰‚ËÊÌÓ„Ó ËÁÓ·‡ÊÂÌËﬂ.

çÂÔÓ‰‚ËÊÌÓÂ ËÁÓ·‡ÊÂÌËÂ ÏÓÊÂÚ ÒÂ¸ÂÁÌÓ ÔÓ‚Â‰ËÚ¸ ˝Í‡Ì ÚÂÎÂ‚ËÁÓ‡.

• çÂ ÒÎÂ‰ÛÂÚ ÔÓÒÏ‡ÚË‚‡Ú¸ ÌÂÔÓ‰‚ËÊÌÓÂ ËÁÓ·‡ÊÂÌËÂ Ì‡ Üä ˝Í‡ÌÂ ·ÓÎÂÂ ‰‚Ûı ˜‡ÒÓ‚, ˜ÚÓ·˚ ÌÂ ‚˚Á‚‡Ú¸ ˝ÙÙÂÍÚ ÓÒÚ‡ÚÓ˜ÌÓ„Ó

ËÁÓ·‡ÊÂÌËﬂ Ì‡ ˝Í‡ÌÂ. èÓ‰Ó·ÌÓÂ ÓÒÚ‡ÚÓ˜ÌÓÂ ËÁÓ·‡ÊÂÌËÂ Ú‡ÍÊÂ ËÁ‚ÂÒÚÌÓ Í‡Í “‚˚„Ó‡ÌËÂ ˝Í‡Ì‡”.

ÇÓ ËÁ·ÂÊ‡ÌËÂ Ú‡ÍÓ„Ó ˝ÙÙÂÍÚ‡ ÛÏÂÌ¸¯ËÚÂ ÛÓ‚ÂÌ¸ ﬂÍÓÒÚË Ë ÍÓÌÚ‡ÒÚÌÓÒÚË ˝Í‡Ì‡ ÔË ÓÚÓ·‡ÊÂÌËË ÌÂÔÓ‰‚ËÊÌ˚ı ËÁÓ·‡ÊÂÌËÈ.

• ÇÒÎÂ‰ÒÚ‚ËÂ ˝ÍÒÔÎÛ‡Ú‡ˆËË ÚÂÎÂ‚ËÁÓ‡ Ò Üä ˝Í‡ÌÓÏ ‚ ÙÓÏ‡ÚÂ 4:3 Ì‡ ÔÓÚﬂÊÂÌËË ‰ÓÎ„Ó„Ó ‚ÂÏÂÌË, ÒÎÂ‚‡, ÒÔ‡‚‡ Ë ‚

ˆÂÌÚÂ ˝Í‡Ì‡ ÏÓ„ÛÚ ÔÓﬂ‚ËÚ¸Òﬂ ÒÎÂ‰˚ „‡ÌËˆ ÙÓÏ‡Ú‡, ‚˚Á‚‡ÌÌ˚Â ‡ÁÌËˆÂÈ ËÁÎÛ˜ÂÌËﬂ Ò‚ÂÚ‡ ‚ ‡ÁÌ˚ı Ó·Î‡ÒÚﬂı ˝Í‡Ì‡.

àÒÔÓÎ¸ÁÓ‚‡ÌËÂ ÚÂÎÂ‚ËÁÓ‡ ‰Îﬂ ‚ÓÒÔÓËÁ‚Â‰ÂÌËﬂ DVD-‰ËÒÍÓ‚ ËÎË ÔÓ‰ÍÎ˛˜ÂÌËÂ Ë„Ó‚ÓÈ ÔËÒÚ‡‚ÍË ÏÓÊÂÚ ÓÍ‡Á‡Ú¸ ÔÓ‰Ó·ÌÓÂ

‚ÓÁ‰ÂÈÒÚ‚ËÂ Ì‡ ˝Í‡Ì. èÓ‚ÂÊ‰ÂÌËﬂ, ‚˚Á‚‡ÌÌ˚Â ‚˚¯ÂÛÍ‡Á‡ÌÌ˚Ï ˝ÙÙÂÍÚÓÏ, ÌÂ ÔÓ‰ÎÂÊ‡Ú „‡‡ÌÚËÈÌÓÏÛ ÂÏÓÌÚÛ.

• ÑÎËÚÂÎ¸ÌÓÂ ÓÚÓ·‡ÊÂÌËÂ ÌÂÔÓ‰‚ËÊÌ˚ı ËÁÓ·‡ÊÂÌËÈ, Ì‡ÔËÏÂ, ÔË ÔÓ‰ÍÎ˛˜ÂÌËË ˝Í‡Ì‡ Í ‚Ë‰ÂÓË„Â Ë ÍÓÏÔ¸˛ÚÂÛ, ÏÓÊÂÚ ‚˚Á‚‡Ú¸ ÔÓﬂ‚ÎÂÌËÂ

ÓÒÚ‡ÚÓ˜Ì˚ı ËÁÓ·‡ÊÂÌËÈ. ÇÓ ËÁ·ÂÊ‡ÌËÂ ‚ÓÁÌËÍÌÓ‚ÂÌËﬂ ÔÓ‰Ó·ÌÓ„Ó ˝ÙÙÂÍÚ‡, ÔË ÓÚÓ·‡ÊÂÌËË ÌÂÔÓ‰‚ËÊÌ˚ı ËÁÓ·‡ÊÂÌËÈ ÛÏÂÌ¸¯ËÚÂ ÛÓ‚ÂÌ¸

Ô‡‡ÏÂÚÓ‚ "ﬂÍÓÒÚË" Ë "ÍÓÌÚ‡ÒÚÌÓÒÚË".

á‡ÔÓ·¥ÊÌ¥ Á‡ıÓ‰Ë Ô¥‰ ˜‡Ò ‚¥‰Ú‚ÓÂÌÌﬂ ÌÂÛıÓÏÓ„Ó ÁÓ·‡ÊÂÌÌﬂ.

Ç¥‰Ú‚ÓÂÌÌﬂ ÌÂÛıÓÏÓ„Ó ÁÓ·‡ÊÂÌÌﬂ ÏÓÊÂ ‚ËÍÎËÍ‡ÚË ÌÂÔÓÔ‡‚ÌÂ ÔÓ¯ÍÓ‰ÊÂÌÌﬂ ÂÍ‡ÌÛ ÚÂÎÂ‚¥ÁÓ‡.

• çÂ ‚‡ÚÓ ÔÂÂ„Îﬂ‰‡ÚË ÌÂÛıÓÏÂ ÁÓ·‡ÊÂÌÌﬂ Ì‡ êä ÂÍ‡Ì¥ ·¥Î¸¯Â ‰‚Óı „Ó‰ËÌ, ˘Ó· ÌÂ ‚ËÍÎËÍ‡ÚË Á‡ÎË¯ÍÓ‚Ó„Ó ÁÓ·‡ÊÂÌÌﬂ.

ÖÙÂÍÚ Á‡ÎË¯ÍÓ‚Ó„Ó ÁÓ·‡ÊÂÌÌﬂ Ú‡ÍÓÊ ‚¥‰ÓÏËÈ ﬂÍ "‚Ë„ÓﬂÌÌﬂ ÂÍ‡ÌÛ".

ôÓ· ÛÌËÍÌÛÚË Ú‡ÍÓ„Ó ÂÙÂÍÚÛ, ÒÎ¥‰ ÁÏÂÌ¯Û‚‡ÚË ¥‚ÂÌ¸ ﬂÒÍ‡‚ÓÒÚ¥ Ú‡ ÍÓÌÚ‡ÒÚÌÓÒÚ¥ Ì‡ ˜‡Ò ‚¥‰Ú‚ÓÂÌÌﬂ ÌÂÛıÓÏÓ„Ó ÁÓ·‡ÊÂÌÌﬂ.

• ÇÌ‡ÒÎ¥‰ÓÍ ÂÍÒÔÎÛ‡Ú‡ˆ¥ª ÚÂÎÂ‚¥ÁÓ‡ Á êä ÂÍ‡ÌÓÏ Û ÙÓÏ‡Ú¥ 4:3 ÔÓÚﬂ„ÓÏ ÚË‚‡ÎÓ„Ó ˜‡ÒÛ, ÁÎ¥‚‡, ÒÔ‡‚‡ Ú‡ ‚ ˆÂÌÚ¥ ÂÍ‡ÌÛ

ÏÓÊÛÚ¸ ‚ËÌËÍ‡ÚË ÒÎ¥‰Ë ÏÂÊ ˆ¸Ó„Ó ÙÓÏ‡ÚÛ, ˘Ó ÔÓﬂÒÌ˛πÚ¸Òﬂ ÌÂ¥‚ÌÓÏ¥Ì¥ÒÚ˛ Ò‚¥ÚÎÓ‚Ó„Ó ‚ËÔÓÏ¥Ì˛‚‡ÌÌﬂ Û ¥ÁÌËı ˜‡ÒÚËÌ‡ı

ÂÍ‡ÌÛ. èÓ‰¥·ÌËÈ ÂÙÂÍÚ ÏÓÊÂ ‚ËÌËÍ‡ÚË Á‡ ÛÏÓ‚Ë ˜‡ÒÚÓ„Ó ‚ËÍÓËÒÚ‡ÌÌﬂ ÚÂÎÂ‚¥ÁÓ‡ ‰Îﬂ ÔÂÂ„Îﬂ‰Û DVD-‰ËÒÍ¥‚ ˜Ë Ô¥‰ÍÎ˛˜ÂÌÌﬂ

¥„Ó‚Óª ÔËÒÚ‡‚ÍË. ìÏÓ‚Ë „‡‡ÌÚ¥ÈÌÓ„Ó Ó·ÒÎÛ„Ó‚Û‚‡ÌÌﬂ ÌÂ ÔÓ¯Ë˛˛Ú¸Òﬂ Ì‡ ÔÓ¯ÍÓ‰ÊÂÌÌﬂ, ÔÓ‚'ﬂÁ‡Ì¥ Á ‚ËÌËÍÌÂÌÌﬂÏ

‚Ë˘Â‚Í‡Á‡ÌÓ„Ó ÂÙÂÍÚÛ.

• ÑÓ‚„ÓÚË‚‡ÎÂ ‚¥‰Ó·‡ÊÂÌÌﬂ ÌÂÛıÓÏËı Ó·'πÍÚ¥‚, Ì‡ÔËÍÎ‡‰, ﬂÍ˘Ó ÂÍ‡Ì Ô¥‰ÍÎ˛˜ÂÌÓ ‰Ó ÍÓÏÔ'˛ÚÂ‡ ˜Ë ‚¥‰ÂÓ„Ë, ÏÓÊÂ ÒÔË˜ËÌËÚË ÔÓﬂ‚Û Ì‡

ÂÍ‡Ì¥ Á‡ÎË¯ÍÓ‚Ëı ÁÓ·‡ÊÂÌ¸. ôÓ· ÛÌËÍÌÛÚË ˆ¸Ó„Ó, ÒÎ¥‰ ÁÏÂÌ¯Û‚‡ÚË ÁÌ‡˜ÂÌÌﬂ Ô‡‡ÏÂÚ¥‚ “ﬂÒÍ‡‚ÓÒÚ¥” Ú‡ “ÍÓÌÚ‡ÒÚÌÓÒÚ¥”, ÍÓÎË Ì‡ ÂÍ‡Ì¥

ÁÌ‡ıÓ‰ËÚ¸Òﬂ ÌÂÛıÓÏÂ ÁÓ·‡ÊÂÌÌﬂ.

CIS-Still.qxd 10/18/05 3:58 PM Page 1

English-1

English

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts .............................................................. 2

How to Adjust the Stand .......................................... 2

How to Adjust the Angle of the TV ...................... 2

Installing the Wall Mount Kit .................................... 3

Installing VESA compliant mounting devices .......... 3

Viewing the Control Panel ........................................ 3

Viewing the Connection Panel.................................. 4

Viewing the Remote Control .................................... 5

Installing Batteries in the Remote Control................ 6

Switching On and Off................................................ 6

Placing Your Television in Standby Mode ................ 6

Plug & Play .............................................................. 6

SETTING THE CHANNELS

Storing Channels Automatically ................................ 7

Storing Channels Manually ...................................... 8

Editing the Channels ................................................ 9

Sorting the Stored Channels .................................... 9

Assigning Channels Names .................................... 10

Fine Tuning Channel Reception .............................. 10

SETTING THE PICTURE

Changing the Picture Standard ................................ 11

Adjusting the Custom Picture .................................. 11

Changing the Colour Tone........................................ 12

SETTING THE SOUND

Changing the Sound Standard ............................12

Adjusting the Volume Automatically ....................12

SETTING THE TIME

Setting and Displaying the Current Time..............13

Setting the Sleep Timer ........................................13

Switching the Television

On and Off Automatically......................................14

SETTING THE OTHERS

Choosing Your Language ....................................14

Setting the Blue Screen Mode..............................15

Selecting the Source ............................................15

Editing the Input Source Names ..........................15

USING THE TELETEXT FEATURE

Teletext Decoder ..................................................16

Displaying the Teletext Information ......................16

Selecting a Specific Teletext Page ......................17

Using Fastext to Select a Teletext Page ..............17

Storing Teletext Pages..........................................17

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................18

Display Modes ......................................................18

Setting the PC ......................................................19

RECOMMENDATIONS FOR USE

Troubleshooting:

Before Contacting Service Personnel ..................20

Technical and Environmental Specifications ......20

Symbol Press Important Note One-Touch

Button

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 1

English-2

CONNECTING AND PREPARING YOUR TV

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control

& Batteries (AAA x 2)

Power Cord Wall Mount kit Owner’s Instructions

 Warranty card  Service Network Card  Safety Guide  Registration Cards

How to Adjust the Stand

(1)

(2)

1. Place the front of the TV onto a soft cloth

or cushion on a table as in Figure (1).

- Align the TV bottom along the table

edge.

2. Press on the center of the TV back.

Adjust the stand as in Figure (2) while

pressing the “PUSH” button on the back of

the stand.

3. Place the TV on the table so that the TV

sits safely.

When you adjust the stand, press the “PUSH"

button on the back of the stand.

How to Adjust the Angle of the TV

1. Figure (1) shows the adjustment angle (0°~13°) when you use the LCD on its stand .

Excessive tilting can turn the LCD TV over which may cause damage.

2. Figure (2) shows the adjustment angle (13°~80°) when you convert the LCD from stand-based use

to wall-mount.

3. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.

You will hear a “Click ” sound when changing the angle from 1 to 2 or 3 to 2.

(1) Angle adjustment when using the

TV on its stand.

(2) Angle adjustment when converting

from Stand to Wall mount (1 3, 3 1)

(3) Angle adjustment when LCD TV

is wall-mounted

When you adjust the stand, press the “PUSH" button on the back of the stand.

PUSH button

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 2

English-3

Viewing the Control Panel

Speakers

SOURCE

Toggles between all the available input sources

(TV - Ext. - AV - S-Video - PC).

In the on-screen menu, use this button as you use the

ENTER button on the remote control.

MENU

Press to see an on-screen menu of your TV’s features.

Press to decrease or increase the volume.

In the on-screen menu, use the buttons

as you use the  and  buttons on the remote control.

Press to change channels. In the on-screen menu, use the

buttons as you use the  and  buttons on

the remote control. (Without the Remote Control, You can

turn on TV by using the Channel buttons.)

POWER

Press to turn the TV on and off.

(Headphone Jack)

Connect a set of external headphones to this jack for private

listening.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Power Indicator

Blinks and turns off when the power is on and lights up in

stand-by mode.

The product colour and shape may vary depending on the model.

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on

installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for

assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any

damage to the product or injury to yourself or others if you elect to install the TV on your own.

Installing the Wall Mount Kit

Installing VESA compliant mounting devices

1. Place the TV faced down on a soft cloth or cushion

on a table.

2. Adjust the stand, pressing the "PUSH"

button on the back of the stand.

3. Align the mounting interface pad (not supplied) with

the holes in the stand bottom and secure it with the

four screws that come with the arm-type base,

wall mount hanger or other bases (not supplied).

When you adjust the stand, press the “PUSH" button on

the back of the stand.

PUSH button

Mounting pad

(sold separately)

(2)

(3)

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 3

English-4

Viewing the Connection Panel

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

The product colour and shape may vary depending on the model.

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 4

English-5

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting External A/V Devices

-

Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear of your set and the other ends to corresponding audio

out connectors on the A/V device.

Connecting Set-Top Box, VCR or DVD

- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)

and connect the VCR (or DVD) to your set.

Connecting Computer

- Connect the D- Sub cable (optional) to “PC IN” on the rear of your set and the other end to the

Video Card of your computer.

- Connect the stereo audio cable (optional) to “PC AUDIO IN” on the rear of your set and the other end to “Audio Out” of the

sound card on your computer.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

- The place of the Kensington Lock may be different depending on its model.

Television Standby button

Number buttons for direct

channel access

One/Two-digit channel selection

: Volume increase

: Volume decrease

Temporary sound switch-off

Selects the TV mode directly

Displays the main on-screen menu

Sound effect selection

Previous channel

P: Next channel

P: Previous channel

Available source selection

Use to see information on the

current broadcast

Exit the on-screen menu

Control the cursor in the menu

Automatic Power-off

Picture effect selection

Sound mode selection

Teletext Functions

Teletext hold

Exit from the teletext display

Teletext index

Teletext sub page

Teletext display/mix both teletext

information and the normal broadcast

Fastext topic selection

P: Teletext next page

P: Teletext previous page

Teletext mode selection (LIST/FLOF)

Teletext reveal

Teletext store

Teletext size selection

The performance of the remote control may be affected by bright light.

For details, refer to further instructions.

Viewing the Remote Control

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 5

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the lower-right panel.

2. Press the POWER button on the right side of the panel.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the panel.

When you switch the set on for the very first time, you will be asked to choose language in which the menus

are to be displayed.

4. To switch your set off, press the POWER button again.

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode

can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a standby indicator appears on the lower-right panel.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel

up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

Switching On and Off

Placing Your Television in Standby Mode

When the TV is initially powered on, several basic settings proceed

automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  button.

Press the ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected.

Press the ENTER button.

Please check that the antenna cable is connected correctly.

Plug & Play

English-6

1. Slide the cover out completely.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time. The remote control can be used up to about 23 feet from

the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 6

English-7



Language: Select your language.



Country: Select your country.



Auto Store: Automatically scans for and stores channels available in the local area.



Clock Set: Sets the current time for the TV clock.

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

button

to select “Setup”, then press the ENTER button.

2.

Press the  or 

button

to select

“Plug & Play”

, then

press the ENTER button.

3. This will change or reset the settings.

4. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

5. The “Auto Store” menu is displayed with the “Start” selected.

Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the ENTER button at any time to interrupt the memorization process.

6. Press the ENTER button.

Select the “Hour” or “Minute” by pressing the

 or 

button.

Set the “Hour” or “Minute” by pressing the

 or 

button.

You can also set the hour and minute by pressing the number buttons on the

remote control.

7. Press the ENTER button to confirm your setting.

SETTING THE CHANNELS

You can scan for the frequency ranges available to you (and availability

depends on your country). Automatically allocated programme numbers

may not correspond to actual or desired programme numbers.

However, you can sort numbers manually and clear any channels you do

not wish to watch.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”,

then press the ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”,

then press the ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process

and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

Storing Channels Automatically

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 7

English-8

You can store up to 100 channels, including those received via cable

networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish

to identify.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”,

then press the ENTER button.

2. Press the  or  button to select “Manual Store”,

then press the ENTER button.

3. Press the ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number

by pressing the  or  button and then press the ENTER button.

5. Press the  or  button to select “Colour System”,

then press the ENTER button.

6. Select the colour standard required by pressing the  or  button,

then press the ENTER button.

7. Press the  or  button to select “Sound System”,

then press the ENTER button.

8. Select the sound standard required by pressing the  or  button,

then press the ENTER button.

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored,

press the  or  button to select “Channel”.

Press the ENTER button. Select C (Air channel) or S (Cable channel)

by pressing the  or  button. Press the  button to select channel.

Select the required number by pressing the  or  button and then

press the ENTER button.

Channel mode: P (Programme mode)

C (Air channel mode)

S (Cable channel mode)

10. If you do not know the channel numbers,

press the  or  button to select “Search”. Press the ENTER button.

Search by pressing the  or  button and then

press the ENTER button.

11. Press the  or  button to select “Store”,

then press the ENTER button.

Press the  or  button to select “OK”, then press the ENTER button.

12. Repeat steps 3 to 11 for each channel to be stored.



Programme: Selects a program number for the channel.



Colour System: Sets the colour supporting system.



Sound System: Sets the sound supporting system.



Channel: Selects a channel.



Search: Scans for the frequency value for the channel.



Store: Saves your settings.

Storing Channels Manually

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 8

English-9

You can exclude the channels you chose from the channels you

scanned. When you scan through the stored channels, those you

have chosen to skip are not displayed.

All channels that you do not specifically choose to skip are displayed

during scanning.

1. Use the number buttons to directly select the channel that

will be added or deleted.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”,

then press the ENTER button.

3. Press the  or  button to select “Add/Delete”,

then press the ENTER button.

4. Repeatedly pressing the ENTER button will alternate between add

channel and delete channel.

5. Press the P or P buttons to switch to the appropriate channel,

then repeat above.

6. Press the EXIT button to exit.

You can view any channel (including an erased channel) by using the number buttons

on the remote control.

Editing the Channels

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have been

automatically stored.

Give easily remembered numbers to the channels that you watch

most often.

1. Press the MENU button to display the menu. Press the  or  button to

select “Channel”, then press the ENTER button.

2.

Press the  or  button to select “Sort”,

then press the ENTER button.

3.

Press the ENTER button to select “From”. Press the  or  button

until the channel number that you wish to change is displayed.

Press the ENTER button.

4.

Press the  or  button to select “To”, then press the ENTER button.

Press the  or  button until the new number by which you wish to

identify the channel is displayed.

Press the ENTER button.

5.

Press the  or  button to select “Store”,

then press the ENTER button.

Press the  or  button to select “OK”, then press the ENTER button.

The selected channel is exchanged with the one previously stored to the chosen

number.

6.

Repeat steps 3 to 5 for another channel to be sorted.

7.

Press the EXIT button to exit.

Sorting the Stored Channels

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 9

English-10

Channel names will be assigned automatically when channel information

is broadcast.

These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button to

select “Channel”, then press the ENTER button.

2.

Press the  or  button to select “Name”,

then press the ENTER button.

3.

If necessary, select the channel to be assigned to a new name by

pressing the

 or 

button. Press the

ENTER

button.

4.

The characters available are :

Letters of the alphabet (A~Z)

Numbers (0~9)

Special characters (

-

, space)

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.

Press the EXIT button to exit.

Assigning Channels Names

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the

 or 

button

Press the



button

Press the



button

Press the ENTER button

Fine tuned channels that have been saved are marked with an asterisk “*” on the

right-hand side of the channel number in the channel banner. And the channel number

turns red.

To reset the fine-tuning, select “Reset” by pressing the  or  button and then press

the

ENTER

button.

Use fine tuning to manually adjust a particular channel for optimal

reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”,

then press the ENTER button.

3. Press the  or  button to select “Fine Tune”,

then press the ENTER button.

4. Press the  or  button to adjust the fine tuning.

Press the

ENTER

button.

5. Press the EXIT button to exit.

Fine Tuning Channel Reception

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 10

English-11

SETTING THE PICTURE

You can select the type of picture which best corresponds to your

viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2.

Press the ENTER button to select “Mode”.

3.

Press the

 or 

button to select the desired picture effect.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.

 Standard: Selects the picture for optimum display in a normal environment.

 Movie: Selects the picture for comfortable display in a dark room.

 Custom: Select to view your favorite display settings.

(Refer to “Adjusting the Custom Picture” on page 11)

You can also press the

P.MODE button on the remote

control to select one of the

picture settings.

The Picture mode must be adjusted separately for each input source.

If you make any changes to these settings, the picture mode is automatically switched

to “Custom”.

Changing the Picture Standard

 Contrast: Adjusts the lightness and darkness between objects and the background.

 Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

 Colour: Adjusts the colours, making them lighter or darker.

 Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more

natural look.

Your set has several settings which allow you to control picture quality.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2.

Press the  or  button to select “Custom”,

then press the ENTER button.

3.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

4.

Press the

 or  button

to decrease or increase the value of a

particular item.

Press the ENTER button.

5.

Press the EXIT button to exit.

Adjusting the Custom Picture

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 11

English-12

Each broadcasting station has its own signal conditions, and so it is not

easy for you to adjust the volume every time the channel is changed.

This feature let you automatically adjust the volume of the desired

channel by lowering the sound output when the modulation signal is

high or by raising the sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Auto Volume”, then press the

ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the ENTER button.

4. Press the EXIT button to exit.

Adjusting the Volume Automatically

SETTING THE SOUND

You can select the type of the special sound effect to be used when

watching a given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the ENTER button to select “Mode”.

3.

Press the

 or 

button to select the desired sound effect.

Press the

ENTER

button.

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.

 Speech: Emphasizes voices over other sounds.

Changing the Sound Standard

You can also select these

options by simply pressing the

S.MODE button on the remote

control.

You can select the most comfortable colour tone to your eyes.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Colour Tone”, then press the

ENTER button.

3.

Press the

 or  button

to select the desired colour tone setting.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Colour Tone



Cool 2: Makes the colour temperature bluer than “Cool 1” menu.



Cool 1: Makes whites bluish.



Normal: Keeps whites white.



Warm1: Makes whites reddish.



Warm2: Makes the colour temperature redder than “Warm1” menu.

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 12

English-13

SETTING THE TIME

You can set the TV’s clock so that the current time is displayed when

you press the INFO button. You must also set the time if you wish to

use the automatic On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER button.

2. Press the ENTER button to select

“Time”.

3. Press the ENTER button to select “Clock Set”.

4.

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

To...

Move to “Hour” or “Minute”

Set the “Hour” or “Minute”

Press the ENTER button.

Press the...

 or  button.

 or  button.

Setting and Displaying the Current Time

You can select a time period of between 30 and 180 minutes after which

the television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER button.

2. Press the ENTER button to select

“Time”.

3. Press the  or  button to select “Sleep Timer”, then press the

ENTER button.

4. Press the  or  button repeatedly until the desired time appears

(Off, 30, 60, 90, 120, 150, 180). Press the

ENTER

button.

The TV automatically switches to standby mode when the timer reaches 0.

5. Press the EXIT button to exit.

Setting the Sleep Timer

Press the SLEEP button on

the remote control repeatedly

until the appropriate time

interval appears.

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 13

English-14

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER button.

2. Press the ENTER button to select

“Time”.

3. Press the  or  button to select “On Timer”, then press the

ENTER button.

4. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.

When finished, press the ENTER button to return.

5. Press the  or  button to select “Off Timer”,

then press the ENTER button.

6. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.

When finished, press the ENTER button to return.

7. Press the EXIT button to exit.

The first step is to set the television’s clock.

(refer to “Setting and Displaying the Current Time” on page 13)

You can also set hour and minute by pressing the number buttons on the remote control.

The "Activation" setting must be set to "On" in order for the timers to work.

Switching the Television On and Off Automatically

SETTING THE OTHERS

When you start using your set for the first time, you must select the

language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.

Press the  or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Language”,

then press the ENTER button.

3. Select a particular language by pressing the  or  button repeatedly.

Press the ENTER button.

You can choose one of 12 languages.

4. Press the EXIT button to exit.

Choosing Your Language

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 14

English-15

If no signal is being received or the signal is very weak, a blue screen

automatically replaces the noisy picture background. If you wish to

continue viewing the poor picture, you must set the "Blue Screen"

mode to "Off".

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Blue Screen”

then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”.

Press the ENTER button.

4. Press the EXIT button to exit.

Setting the Blue Screen Mode

You can select among external sources connected to

your TV’s input jacks.

1. Press the MENU button to display the menu.

Press the ENTER button to select “Input”.

2. Press the ENTER button to select “Source List”.

3. Select the required device by pressing the  or  button.

Press the ENTER button.

Selecting the Source

Press the SOURCE button on the remote control to toggel between all the available

source. TV mode can be selected by pressing the TV or P / button on the

remote control but you cannot select it by pressing the SOURCE button.

Name the device connected to the input jacks to make your input

source selection easier.

1. Press the MENU button to display the menu.

Press the ENTER button, to select “Input”.

2. Press the  or  button to select “Edit Name”, then press the

ENTER button.

3. Press the  or  button to input select input source that you wish to edit.

Press the ENTER button.

4. Press the  or  button to select the required device.

Press the ENTER button.

5. Press the EXIT button to exit.

Editing the Input Source Names

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 15

English-16

USING THE TELETEXT FEATURE

Most set channels carry “ teletext ”, pages of written

information that provide information such as:

Television programme times.

News bulletins and Weather forecasts.

Sports results.

Subtitles for the hard of hearing.

The teletext pages are organized according to six categories:

Part

A

B

C

D

E

F

Contents

Selected page number.

Broadcasting station identity.

Current page number or search status.

Date and time.

Text.

Status information.

Teletext Decoder

You can display teletext information at any time, but signal reception

must be good. Otherwise:

Information may be missing.

Some pages may not be displayed.

To activate the teletext mode and display the contents page:

1.

Using the P () or P () button, select the channel providing the

teletext service.

2.

Press the TTX/MIX () button to activate the teletext mode.

The contents page is displayed. It can be redisplayed at any time by pressing

the MENU () button.

3. Press the TTX/MIX () button again.

The actual broadcast will be displayed simultaneously with the teletext page

on the screen.

4. Press the TV() button again to exit from the Text display.

If any broken character appears while Text is being viewed, make sure that the

Text language is identical with the language in the “Setup” menu mode. If both languages

are different, select the same language with the Text language on the “Setup” menu.

Displaying the Teletext Information

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 16

English-17

Press the number buttons on the remote control to enter the page

number directly:

1.

Enter the three-digit page number listed in the contents by pressing the

corresponding numeric buttons.

2.

If the selected page is linked with several secondary pages, the secondary

pages are displayed in sequence. To freeze the display on a given page,

press the

()

. Press the

()

button again to resume.

3. Using the various display options:

To display...

Both teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next page

The previous page

Double-size letters in the:

 Upper half of the screen

 Lower half of the screen

Normal screen

Press the...

TTX/MIX ( )

INFO ( )

DUAL I-II ( )

P

()

P

()

 Once

 Twice

 Three times

Selecting a Specific Teletext Page

The various topics included in the teletext pages are colour-coded, and can

be selected by pressing the coloured buttons on the remote control.

1.

Display the teletext contents page by pressing the

TTX/MIX ()

button.

2. Press the coloured button corresponding to the topic that you wish to

select (The available topics are listed on the status information line).

3. Press the Red button to display the previous page.

Press the Green button to display the next page.

4. Press the TV () button again to exit from the Text display.

Using Fastext to Select a Teletext Page

You can store up to four teletext pages to display them later at leisure.

1. Select the LIST mode using the

SOURCE

()

button.

The

SOURCE

()

button is used to switch between the LIST and FLOF modes.

2. Press the coloured button corresponding to the page that will be replaced.

3. Enter the new page number using the numeric buttons.

4. Repeat steps 2 and 3 for each page to be stored, using a different

coloured button each time.

5. Press the SLEEP

()

button until the corresponding blocks blink.

Storing Teletext Pages

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 17

English-18

SETTING THE PC

The Windows display-settings for a typical computer are shown below. The actual screens on your PC

may be different depending upon your particular version of Windows and your particular video card.

Even if your actual screens look different, the same, basic set-up information will apply in almost all

cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and

Themes” and a display dialog-box will appear.

3. When the control panel window appears, click on “Display” and

a display dialog-box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution):

Optimum - LE15S51BP: 1024 X 768

LE20S52BP: 800 X 600

If a vertical-frequency option exists on your display settings dialog

box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK”

and exit the dialog box.

Setting up Your PC Software (Based on Windows XP)

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended. (All resolutions between the supported limits are supported)

Mode

VGA

SVGA

XGA

LE15S51BP

Resolution

720X400

640X480

800X600

1024X768

Horizontal

Frequency (kHz)

31.469

37.500

46.875

37.879

48.363

60.023

Vertical

Frequency (Hz)

70.087

59.940

75.000

60.317

60.004

75.029

Pixel Clock

Frequency (MHz)

28.322

25.175

31.500

49.500

40.000

65.000

78.750

Sync Polarity

(H/V)

- / +

- / -

+ / +

- / -

+ / +

BN68-00940F-01Eng.qxd 10/18/05 3:29 PM Page 18

Sayfa yükleniyor...

Samsung LE20S52BP Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Samsung LE20S52BP Kullanım kılavuzu

İlgili makaleler