Simplicity 7800413 Kullanım kılavuzu

7102892

Revision A

Riding Mower

Model No. Description

7800413 EYK155420G Yard King CE Riding Mower, 15.5HP, 42"

en

Operator’s Manual – Riding mower

cs

Návod k použití – Malotraktor se sekačkou

nl

Gebruikershandleiding – Zitmaaier

fi

Käyttöohje – Ajettava ruohonleikkuri

fr

Manuel d’utilisation – Tondeuse autoportée

de

Bedienungsanleitung – Rasenmähertraktor

hu

Használati útmutató – Fűnyíró traktor

it

Manuale per l’operatore – Motofalciatrice

lv

Operātora rokasgrāmatā – Zāles pļāvējs – raiders

no

Bruksanvisning – Plentraktor

pl

Instrukcja obsługi – Kosiarka traktorowa

Operator’s Manual

Not for

Reproduction

Thank you for purchasing this quality-built YARD KING mower. We are pleased that you’ve placed your confidence in the

YARD KING brand. When operated and maintained according to the instructions in this manual, your YARD KING mower will

provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with mowers and how to

avoid them. Because Briggs & Stratton Power Products Group, LLC does not necessarily know all the applications this mower

could be used for, it is important that you read and understand these instructions. Keep this manual near the mower for

convenient reference.

This mower requires final assembly before use. Refer to the Assembly section of this manual for instructions on final

assembly procedures. Follow the instructions completely.

Where to Find Us

You never have to look far to find Briggs & Stratton support and service for your mower. There are over 30,000 Briggs &

Stratton authorized service dealers worldwide who provide quality service. You can also contact Briggs & Stratton Customer

Service by phone at (800) 528-5087, or on the Internet at www.murray.com.

Mower

Model Number _____________________________________

Serial Number _____________________________________

Engine

Model Number _____________________________________

Serial Number _____________________________________

Date Purchased

YARD KING is a trademark of Briggs & Stratton Power Products Group, LLC.

Briggs & Stratton Power Products Group, LLC

900 N. Parkway

Jefferson, WI 53549

No part of this material may be reproduced or transmitted in any

form by any means without the express written permission of Briggs

& Stratton Power Products Group, LLC.

Not for

Reproduction

1

2

3

A

B

C

D

E

F

G

H

I J

K

M

L

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

max 10°

max ±150N max ±90N

stop

(#1)

(#2)

(#3)

(#5)

(#6)

(#7)

(#8)

(#9)

(#10)

(#4)

Not for

Reproduction

2 murray.com

4

7

5

8

6

9

D

A

C

F

E

G

B

D

C

B

E

C

B

D

A

E

F

C

A

F

B

D

G

H

B

G

C

A

D

F

B

A

E

(#4)

(#9)

(#8)

(#7)

(#5)

(#3)

(#6)

(#1)

(#2)

Not for

Reproduction

English ċÅİ Nederlands Suomi Français Deutsch Õ¯ÝÇ Italiano -dĘĭ½čģĕ Norsk BÝÇċÅ½

3

Table of Contents

Operator Safety .................................. 4

International Pictorials ......................................... 4

Responsibility of the Owner ..................................... 4

Safe Operation Practices ........................................ 5

Assembly ...................................... 7

Install the Front Wheels ........................................ 7

Install the Seat ............................................... 7

Assemble the Steering Wheel .................................... 7

Maintenance Free Battery ....................................... 7

Important! Before You Start Mowing .............................. 8

Features and Controls ............................. 9

Location of Controls ........................................... 9

Attachments ................................................. 9

Operation ...................................... 10

Safety Interlock System Tests .................................... 10

Using The Controls ............................................ 10

Mowing ..................................................... 11

Before Starting the Engine ...................................... 12

Mowing and Bagging Tips ...................................... 13

Maintenance ................................... 14

Maintenance Chart ............................................ 14

Check Tire Pressure ........................................... 14

Maintenance Free Battery ....................................... 14

Storage ..................................................... 15

Order Replacement Parts ....................................... 15

Troubleshooting ................................. 16

Warranty ...................................... 18

WARNING

Battery posts, terminals and related accessories contain

lead and lead compounds, chemicals known to the State

of California to cause cancer and birth defects or other

reproductive harm. Wash hands after handling.

!

WARNING

Engine exhaust, some of its constituents, and certain

vehicle components contain or emit chemicals known to

the State of California to cause cancer or other reproductive

harm.

!

Not for

Reproduction

4 murray.com

Operator Safety

International Pictorials

IMPORTANT: The following pictorials are located on your

unit or on literature supplied with the product. Before you

operate the unit, learn and understand the purpose for each

pictorial.

NOTE: Illustrations and pictorials begin on page 1.

Safety Warning Pictorials (Figure 1)

A - WARNING.

B - IMPORTANT: Read Owner’s Manual Before Operating

This Machine.

C - WARNING: Thrown Objects. Keep Bystanders Away.

Read User Instructions Before Operating This Machine.

D - WARNING: Do Not Use This Machine On Slopes Greater

Than 10 Degrees.

E - DANGER: Keep People, Especially Children, Away From

Unit.

F - DANGER: No Step.

G - DANGER: Keep Feet And Hands Away From Rotating

Blade.

H - DANGER: Disconnect Spark Plug Wire Before Servicing

Unit.

I - WARNING: Hot Surface.

J - WARNING: Use Caution When Connecting Or

Disconnecting Accessories.

K - WARNING: Crushed Fingers.

L - IMPORTANT: Follow Instructions In Owner’s Manual To

Level The Deck.

M - WARNING: Stay Clear Of Mower Blade As Long As

Engine Is Running.

Control and Operating Pictorials (Figure 2)

A - Engine Start

B - Lights

C - Engine Stop

D - Engine Run

E - Engine Run

F - Brake

G - Parking Brake

H - Clutch

I - Slow

J - Fast

K - Choke

L - Oil

M - Blade Rotation Control

N - Raise

O - Fuel

Responsibility of the Owner

Know your product: If you understand the unit and how the

unit operates, you will get the best performance. As you read

this manual, compare the illustrations to the unit. Learn the

location and the function of the controls. To help prevent

an accident, follow the operating instructions and the safety

rules. Save these original instructions for future reference.

WARNING: Look for this symbol to indicate

important safety precautions. This symbol

indicates: “Attention! Become Alert! Your Safety Is

At Risk.”

WARNING: This cutting machine is capable of

amputating hands and feet and throwing objects.

Failure to observe the following safety instructions

could result in serious injury or death to the

operator or bystanders.

The responsibility of the owner is to follow the instructions

below.

Not for

Reproduction

5

Safe Operation Practices

For Ride-On (Riding) Rotary Mower Machines

Training

Read the instructions carefully. Be familiar with the 1.

controls and the proper use of the equipment.

Never allow children or people unfamiliar with these 2.

instructions to use the mower. Local regulations may

restrict the age of the operator.

Never mow while people, especially children, or pets 3.

are nearby.

Keep in mind that the operator or user is responsible 4.

for accidents or hazards occurring to other people or

their property.

Do not carry passengers. 5.

All drivers should seek and obtain professional 6.

and practical instruction. Such instruction should

emphasize:

the need for care and concentration when working a.

with ride-on machines;

control of a ride-on machine sliding on a slope will b.

not be regained by the application of the brake. The

main reasons for loss of control are:

insufficient wheel grip; t

being driven too fast; t

inadequate braking;t

the type of machine is unsuitable for its task; t

lack of awareness of the effect of ground t

conditions, especially slopes;

incorrect hitching and load distribution. t

Preparation

While mowing, always wear substantial footwear and 1.

long trousers. Do not operate the equipment when

barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to 2.

be used and remove all objects which may be thrown

by the machine.

WARNING – Petrol is highly flammable. 3.

Store fuel in containers specifically designed for a.

this purpose.

Refuel outdoors only and do not smoke while b.

refuelling.

Add fuel before starting the engine. Never remove c.

the cap of the fuel tank or add petrol while the

engine is running or when the engine is hot.

If petrol is spilled, do not attempt to start the d.

engine but move the machine away from the area

of spillage and avoid creating any source of ignition

until petrol vapours have dissipated.

Replace all fuel tanks and container caps securely. e.

Replace faulty silencers. 4.

Before using, always visually inspect to see that the 5.

blades, blade bolts and cutter assembly are not worn or

damaged. Replace worn or damaged blades and bolts

in sets to preserve balance.

On multi-blade machines, take care as rotating one 6.

blade can cause other blades to rotate.

Operation

Do not operate the engine in a confined space where 1.

dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artificial light. 2.

Before attempting to start the engine, disengage all 3.

blade attachment clutches and shift into neutral.

Do not use on slopes of more than 10 degrees. 4.

Remember there is no such thing as a “safe” slope. 5.

Travel on grass slopes requires particular care. To

guard against overturning:

do not stop or start suddenly when going up or a.

downhill;

engage clutch slowly, always keep machine in gear, b.

especially when travelling downhill;

machine speeds should be kept low on slopes and c.

during tight turns;

stay alert for humps and hollows and other hidden d.

hazards;

never mow across the face of the slope, unless the e.

mower is designed for this purpose.

Not for

Reproduction

6 murray.com

Operation (Continued)

Use care when pulling loads or using heavy equipment. 6.

Use only approved drawbar hitch points. a.

Limit loads to those you can safely control. b.

Do not turn sharply. Use care when reversing. c.

Use counterweight(s) or wheel weights when d.

suggested in the Instruction Book.

Watch out for traffic when crossing or near roadways. 7.

Stop the blades rotating before crossing surfaces other 8.

than grass.

When using any attachments, never direct discharge of 9.

material toward bystanders nor allow anyone near the

machine while in operation.

Never operate the mower with defective guards or 10.

shields, or without safety protective devices in place.

Do not change the engine governor settings or 11.

overspeed the engine. Operating an engine at excessive

speed may increase the hazard of personal injury.

Before leaving the operator’s position:12.

disengage the power take-off and lower the a.

attachments;

change into neutral and set the parking brake; b.

stop the engine and remove the key. c.

Disengage drive to attachments, stop the engine, 13.

and disconnect the spark plug wire(s) or remove the

ignition key:

before cleaning blockages or unclogging chute; a.

before checking, cleaning or working on the mower; b.

after striking a foreign object. Inspect the mower c.

for damage and make repairs before restarting and

operating the equipment;

if the machine starts to vibrate abnormally (check d.

immediately).

Disengage drive to attachments when transporting or 14.

not in use.

Stop the engine and disengage drive to attachment:15.

before refuelling; a.

before removing the grass catcher; b.

before making height adjustment unless adjustment c.

can be made from the operator’s position.

Reduce the throttle setting during engine run-out and, 16.

if the engine is provided with a shut-off valve, turn the

fuel off at the conclusion of mowing.

Before and when backing, look 17. behind and down for

small children.

Use extra care when approaching blind corners, shrubs, 18.

trees or other objects that may obscure vision.

Maintenance and Storage

On multi-blade machines, take care as rotating one 1.

blade can cause other blades to rotate.

When machine is to be parked, stored or left 2.

unattended, lower the cutting means unless a positive

mechanical lock is used.

Keep all nuts, bolts, and screws tight to be sure the 3.

equipment is in safe working condition.

Never store the equipment with petrol in the tank inside 4.

a building where fumes may reach an open flame or

spark.

Allow the engine to cool before storing in any 5.

enclosure.

To reduce the fire hazard, keep the engine, silencer, 6.

battery compartment and petrol storage area free of

grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or 7.

deterioration.

Replace worn or damaged parts for safety. 8.

If the fuel tank has to be drained, this should be done 9.

outdoors.

Not for

Reproduction

7

Assembly

All fasteners are in the parts bag. Do not discard any parts or

material until the unit is assembled.

WARNING: Before doing any assembly or

maintenance to the mower, remove the wire from

the spark plug.

NOTE: In this instruction book, left and right describe the

location of a part with the operator on the seat.

NOTE: Illustrations and pictorials begin on page 1.

NOTE: To assemble the following loose parts, use the

fasteners shown at full size in Figure 3.

Install the Front Wheels

Use a knife and cut the four sides of the container. Install the

front wheels (A) in the container (see Figure 4).

NOTE: Use a piece of wood about 4 feet (1.25 meters) long

to raise the front of the tractor. If a piece of wood cannot be

found, get another person to help lift the tractor. Be careful,

do not let the tractor fall.

Raise the front of the tractor. Set a support (block of 1.

wood) under the tractor.

Make sure the 2. valve stem (B) is to the outside of the

tractor. Slide the front wheel (A) on the spindle (C).

Fasten each front wheel with 3. washer (D), washer (G)

and cotter pin (E). Bend the ends of the cotter pin apart

to keep the front wheel on the spindle.

After the front wheels are installed, lift the tractor from 4.

the support. Roll the tractor off of the container.

If your tractor has 5. hub caps (F), install the hub caps.

Make sure the washers hold the hub caps in place.

Install the Seat

Carefully remove the plastic bag from the seat.1.

Align the holes in the 2. seat hinge (B) to the holes in

the seat (A) (see Figure 5). Fasten the seat to the seat

hinge with the fasteners (D) and (E).

Check the operating position of the seat. If the seat 3.

needs to be adjusted, loosen the two wing bolts (E).

Slide the seat forward or backward along the seat

adjusting holes (C). Tighten the wing bolts.

Assemble the Steering Wheel

Make sure the front wheels point forward.1.

Slide the 2. cover (C) over the steering post (B) (see

Figure 6). Make sure the collar of the cover is on top.

Slide the 3. steering wheel (A) onto the steering post.

Attach the steering wheel to the steering post with 4.

screw (D) and washer (E).

Some models have an 5. optional insert (F) in the parts

bag. Attach the insert to the center of the steering

wheel.

Maintenance Free Battery

IMPORTANT: Before you attach the battery cables to the

battery, check the battery date. The battery date tells if the

battery must be charged.

(Figure 7) Check the top of the 1. battery (A) for the

location of the battery date.

If the 2. battery (A) is put into service before the battery

date, the battery cables can be attached without

charging the battery (A). See “Install The Battery

Cables”.

If the 3. battery (A) is put into service after the battery

date, the battery (A) must be charged. See “Charge The

Battery”.

Charge The Battery (Figure 7)

WARNING: When you charge the battery, do not

smoke. Keep the battery away from any sparks. The

fumes from the battery acid can cause an

explosion.

Remove the 1. battery (A) and battery tray (C).

Remove the protective cap from the battery terminal. 2.

Use a 12 volt battery charger to charge the 3. battery (A).

Charge at a rate of 6 amperes for one hour. If you do

not have a battery charger, have an authorized service

centre charge the battery.

Install the 4. battery (A) and battery tray (C). Make sure

the positive (+) terminal (D) is on the left side.

Not for

Reproduction

8 murray.com

Install The Battery Cables (Figure 7)

WARNING: To prevent sparks, fasten the red cable

to the positive (+) terminal before you connect the

black cable.

Remove the protective cap from the battery terminal. 1.

Slide the 2. terminal cover (B) onto the red cable (E).

Fasten the red cable (E) to the positive (+) terminal

(D) with the fasteners (F) and (G).

Fasten the 3. black cable (H) to the negative (-) terminal

with the fasteners (F) and (G).

Important! Before You Start Mowing

Check the engine oil. t

Fill the fuel tank with petrol. t

Check the air pressure of the tires. t

Check the level of the mower housing. t

Attach the battery cables. t

Check Tire Pressure

Check the air pressure in the tires. Tires with too much air

pressure will cause the unit to ride rough. Also, the wrong

air pressure will keep the mower housing from cutting level.

The correct air pressure is: Front Tires 0,97 BAR (14 PSI),

Rear Tires 0,69 BAR (10 PSI). The tires were over inflated

for shipment.

Prepare The Engine

NOTE: The engine was shipped from the factory filled with

oil. Check the level of the oil. Add oil as needed.

See the engine manufacturer’s instructions for the type

of petrol and oil to use. Before you use the unit, read the

information on safety, operation, maintenance, and storage.

WARNING: Follow the engine manufacturer’s

instructions for the type of petrol and oil to use.

Always use a safety petrol container. Do not smoke

when adding petrol to the engine. When inside an

enclosure, do not fill with petrol. Before you add

petrol, stop the engine. Let the engine cool for

several minutes.

Not for

Reproduction

9

Features and Controls

NOTE: Illustrations and pictorials begin on page 1.

Location of Controls (Figure 8)

Blade Rotation Control (A) — Use the blade rotation control

to start and stop the rotation of the blade.

Clutch/Brake Pedal (B) — The pedal has two functions. The

first function is a clutch. The second function is a brake.

Headlight Switch (C) — The headlight switch is the first

part of the ignition switch. To use the lights with the engine

running, turn the key to the position for the lights.

Ignition Switch (C) — Use the ignition switch to start and

stop the engine.

Shift Lever (D) — Use the shift lever to change the speed of

the unit.

Lift Lever (E) — Use the lift lever to change the height of

cut.

Parking Brake Lever (F) — Use the parking brake lever to

engage the brake when you leave the unit.

Throttle Control Lever (G) — Use the throttle control lever

to increase or decrease the speed of the engine.

Attachments

This unit can use many different attachments. This unit

can pull attachments like a lawn sweeper, a lawn aerator,

or a hopper spreader. This unit can not use attachments

that engage the ground like a plough, a disk harrow, or a

cultivator.

For trailer and pull-behind attachments, the maximum weight

is 113 kg (250 lbs).

Not for

Reproduction

10 murray.com

Operation

Safety Interlock System Tests

WARNING: This unit is equipped with safety

interlock switches and other safety devices. These

safety systems are present for your safety. Do

not attempt to bypass safety switches, and never

tamper with safety devices.

Test 1 — Engine should NOT start if:

t #MBEFSPUBUJPODPOUSPMJTJOUIF&/("(&QPTJUJPO03

t #SBLFQFEBMJT/05GVMMZEFQSFTTFEQBSLJOHCSBLF

OFF).

Test 2 — Engine SHOULD start if:

t 0QFSBUPSJTTJUUJOHJOTFBU"/%

t #MBEFSPUBUJPODPOUSPMJTJOUIF%*4&/("(&QPTJUJPO

AND

t #SBLFQFEBMJTGVMMZEFQSFTTFEQBSLJOHCSBLF0/

Test 3 — Engine should SHUT OFF if:

t 0QFSBUPSSJTFTPGGTFBU

Test 4 — Check Blade Brake Stopping Time

Mower blades and mower drive belt should come to a

complete stop within five seconds after blade rotation control

is moved to DISENGAGE position. If the mower drive belt

does not stop within five seconds, see your dealer.

WARNING: If the unit does not pass a safety test, do

not operate it. See your authorized dealer.

Using The Controls

Use The Throttle Control (Figure 8)

Use the throttle control (G) to increase or decrease the

speed of the engine.

The FAST position is marked with a detent. For normal 1.

operation and when using a grass bagger, move the

throttle control to the FAST position. For maximum

charging of the battery and for a cooler running engine,

operate the engine in the FAST position.

The engine governor is set at the factory for maximum 2.

performance. Do not adjust the governor to increase

the speed of the engine.

Use The Blade Rotation Control (Figure 8)

Use the blade rotation control (A) to engage the blade(s).

Before you start the engine, make sure the 1. blade

rotation control (A) is in the DISENGAGE position.

Move the 2. blade rotation control (A) to the ENGAGE

position to rotate the blade(s).

NOTE: If the engine stops when you engage the

blade(s), the seat switch is not activated. Make sure

you sit in the middle of the seat.

Move the 3. blade rotation control (A) to the DISENGAGE

position to stop the blade(s). Before you leave the

operator’s position, make sure the blade(s) has stopped

rotating.

Before you ride the unit across a sidewalk or a road, 4.

move the blade rotation control (A) to the DISENGAGE

position.

WARNING: Always keep your hands and feet away

from the blade, deflector opening, and the mower

housing when the engine runs.

Use The Shift Lever

To change the forward speed or the direction of the unit,

follow the steps below.

CAUTION: Before you move the shift lever, completely push

the clutch/brake pedal forward to stop the unit. If the unit is

not stopped, the gearbox can be damaged.

Completely push the 1. clutch/brake pedal (B) forward

to stop the unit. Keep your foot on the pedal (see

Figure 8).

Move the 2. throttle control lever (G) to the SLOW

position.

To go forward, move the 3. shift lever (D) to a forward

speed setting. To go backward, move the shift lever to

reverse.

Slowly release the 4. clutch/brake pedal (B). Do not keep

your foot on the pedal.

Move the 5. throttle control (G) to the FAST position.

Not for

Reproduction

11

Use The Parking Brake

Completely push the1. clutch/brake pedal (B) forward

(see Figure 8).

Lift the 2. parking brake lever (F).

Remove your foot from the clutch/brake pedal and then 3.

release the parking brake lever. Make sure the parking

brake will hold the unit.

To release the parking brake, completely push the 4.

clutch/brake pedal (B) forward. The parking brake will

automatically release.

WARNING: Before you leave the operator’s

position, move the shift lever to the neutral (N)

position. Set the parking brake. Move the blade

rotation control to the DISENGAGE position. Stop

the engine and remove the ignition key.

Change The Cutting Height

To change the cutting height, raise or lower the lift lever (E)

as follows (see Figure 8).

Move the lift lever forward to lower the mower housing 1.

and back to raise the mower housing.

When you ride on a sidewalk or road, move the lift lever 2.

to the highest position and move the blade rotation

control to the DISENGAGE position.

Stop The Unit

Completely push the 1. clutch/brake pedal (B) forward

to stop the unit. Keep your foot on the pedal (see

Figure 8).

Move the 2. blade rotation control (A) to the DISENGAGE

position.

Move the 3. shift lever (D) to the NEUTRAL position.

Set the 4. parking brake (F).

WARNING: Make sure the parking brake will hold

the unit.

Move the 5. throttle control (G) to the SLOW position.

To stop the engine, turn the6. ignition key (C) to the OFF

position. Remove the key.

Transport The Unit

To transport the unit, follow the steps below.

Move the blade rotation control to the DISENGAGE 1.

position.

Raise the lift lever to the highest position.2.

Move the throttle control to a position between SLOW 3.

and FAST.

To go faster, move the shift lever to a faster speed.4.

Mowing

Operate With The Mower Housing

IMPORTANT: When you operate with the mower housing,

always operate with the throttle control in the FAST position.

Start the engine. 1.

Move the lift lever to a height of cut position. In high or 2.

thick grass, cut the grass in the highest position first

and then lower the mower housing to a lower position.

Move the throttle control to the SLOW position. 3.

Slowly move the blade rotation control to the ENGAGE 4.

position.

Push the clutch/brake pedal completely forward.5.

Move the shift lever to one of the speed settings. 6.

NOTE: When you mow in heavy grass or mow with a

bagger, put the shift lever in the slowest speed.

Slowly release the clutch/brake pedal.7.

Move the throttle control to the FAST position. If you 8.

need to go faster or slower, stop the unit and move the

shift lever to another speed setting.

Make sure the level of cut is still correct. After you 9.

mow a short distance, look at the area that was cut. If

the mower housing does not cut level, see authorized

dealer.

WARNING: For better control of the unit, select a

safe speed.

Not for

Reproduction

12 murray.com

Operate On Hills

WARNING: Do not ride up or down slopes that are

too steep to back straight up. Never ride the unit

across a slope.

Before you ride up or down a hill, move the shift lever 1.

to the slowest speed.

Do not stop or change speed settings on a hill. If you 2.

must stop, quickly push the clutch/brake pedal forward

and set the parking brake.

To start again, make sure the shift lever is in the 3.

slowest speed. Move the throttle control to the SLOW

position. Slowly release the pedal.

If you must stop or start on a hill, always have enough 4.

space for the unit to roll when you release the brake

and engage the clutch.

Be very careful when you change directions on a 5.

hill. When on a slope or in a turn on a hill, move the

throttle control to the SLOW position to help prevent an

accident.

Before Starting the Engine

Check The Oil

NOTE: The engine was shipped from the factory filled with

oil. Check the level of the oil. Add oil as needed. See the

engine manufacturer’s instructions for the type of petrol and

oil to use.

Make sure the unit is level. 1.

NOTE: Do not check the level of the oil while the engine runs.

Check the oil. Follow the procedure in the engine 2.

manufacturer’s instructions.

If necessary, add oil until the oil reaches the FULL mark 3.

on the dipstick. The quantity of oil needed from ADD to

FULL is shown on the dipstick. Do not add too much oil.

Add Petrol

WARNING: Always use a safety petrol container. Do

not smoke when adding petrol to the fuel tank. Do

not add petrol when you are inside an enclosure.

Before you add petrol, stop the engine and let the

engine cool for several minutes.

(Figure 9) Fill the fuel tank (A) to the FULL (B) position

with regular unleaded petrol. Do not use premium unleaded

petrol. Make sure the petrol is fresh and clean. Leaded petrol

will increase deposits and shorten the life of the valves.

Start The Engine

WARNING: The electrical system has an operator

presence system that includes a sensor switch for

the seat. These components tell the electrical

system if the operator is sitting on the seat. This

system will stop the engine when the operator

leaves the seat. For your protection, always make

sure this system operates correctly.

NOTE: The engine will not start unless you depress the

clutch/brake pedal and move the blade rotation control to the

DISENGAGE position.

Push the clutch/brake brake pedal completely forward. 1.

Keep your foot on the pedal.

Move the shift lever to the neutral (N) position.2.

Make sure the blade rotation control is in the 3.

DISENGAGE position.

Move the throttle control completely forward to the 4.

CHOKE or FAST position. Some models have a separate

choke knob. Pull the choke knob to the full CHOKE

position.

Turn the ignition key to the START position. 5.

NOTE: If the engine does not start after four or five

tries, move the throttle control to the FAST position.

Again try to start the engine. If the engine will not start,

see the Troubleshooting section.

Slowly move the throttle control to the SLOW position. 6.

To start a hot engine, move the throttle control to a 7.

position between FAST and SLOW.

Not for

Reproduction

13

Mowing and Bagging Tips

For a lawn to look better, check the cutting level of the 1.

mower housing. See authorized dealer.

For the mower housing to cut level, make sure the tires 2.

have the correct amount of air pressure.

Every time you use the unit, check the blade. If the 3.

blade is bent or damaged, immediately replace the

blade. Also, make sure the nut for the blade is tight.

Keep the blade(s) sharpened. Worn blades will cause 4.

the ends of the grass to turn brown.

Do not cut or bag grass that is wet. Wet grass will not 5.

discharge correctly. Let the grass dry before cutting.

Use the left side of the mower housing to trim near an 6.

object.

Discharge the cut grass onto the mowed area. The 7.

result is a more even discharge of cut grass.

When you mow large areas, start by turning to the right 8.

so that the cut grass will discharge away from shrubs,

fences, driveways, etc. After one or two rounds, mow in

the opposite direction making left turns until finished.

If the grass is very high, cut two times to decrease the 9.

load on the engine. First cut with the mower housing in

the highest position and then lower the mower housing

for the second cut.

For better engine performance and an even discharge 10.

of the cut grass, always operate the engine with the

throttle in FAST position.

When you use a bagger, operate the engine with the 11.

throttle in FAST position and the shift lever in first or

second gear.

For better cutting performance and a quality cut, mow 12.

with the shift lever in one of the slower speeds.

After each use, clean the bottom and top of the mower 13.

housing for better performance. Also, a clean mower

housing will help prevent a fire.

Not for

Reproduction

14 murray.com

Maintenance

Maintenance Chart

TRACTOR AND MOWER

Every 8 Hours or Daily

Check safety interlock system

Clean debris off tractor and mower deck

Clean debris from engine compartment

Every 25 Hours or Annually *

Check tire pressure

Check mower blade stopping time

Check tractor and mower for loose hardware

Every 50 Hours or Annually *

Clean battery and cables

Check tractor brakes

See Dealer Annually to

Lubricate tractor and mower

Check mower blades **

ENGINE

First 5 Hours

Change engine oil

Every 8 Hours or Daily

Check engine oil level

Every 25 Hours or Annually *

Clean engine air filter and pre-cleaner **

Every 50 Hours or Annually *

Change engine oil

Replace oil filter

Annually

Replace air filter

Replace pre-cleaner

See Dealer Annually to

Inspect muffler and spark arrester

Replace spark plug

Replace fuel filter

Clean engine air cooling system

* Whichever comes first

** Check blades more often in regions with sandy soils

or high dust conditions.

* Whichever comes first

** Clean more often in dusty conditions or when

airborne debris is present.

NOTE: Illustrations and pictorials begin on page 1.

Check Tire Pressure

Check the air pressure in the tires. Tires with too much air

pressure will cause the unit to ride rough. Also, the wrong

air pressure will keep the mower housing from cutting level.

The correct air pressure is: Front Tires 0,97 BAR (14 PSI),

Rear Tires 0,69 BAR (10 PSI).

Maintenance Free Battery

Remove The Battery (Figure 7)

To charge or clean the battery (A), remove the battery (A)

from the unit as follows.

WARNING: To prevent sparks, disconnect the black

battery cable (H) from the negative (-) terminal

before you disconnect the red cable (E).

WARNING: The battery contains sulphuric acid

which is harmful to the skin, eyes and clothing. If

the acid gets on the body or clothing, wash with

water.

Disconnect the 1. black cable (H) from the negative (-)

terminal.

Disconnect the 2. red cable (E) from the positive (+)

terminal (D).

Lift the 3. battery tray (C) and the battery (A) out of the

unit.

Not for

Reproduction

15

Charge The Battery (Figure 7)

WARNING: When you charge the battery, do not

smoke. Keep the battery away from any sparks. The

fumes from the battery acid can cause an

explosion.

Before you charge the 1. battery (A), remove the

battery (A).

To charge the 2. battery (A), use a 12 volt battery charger.

Charge at a rate of 6 amperes for 1 hour.

Install the 3. battery (A).

WARNING: To prevent sparks, fasten the red cable

to the positive (+) terminal before you connect the

black cable.

Fasten the 4. red cable (E) to the positive (+) terminal

(D) with the fasteners as shown.

Fasten the 5. black cable (H) to the negative (-) terminal

with the fasteners as shown.

Storage

WARNING: Never store the unit (with fuel) in an

enclosed, ventilated structure. Fuel vapors can

travel to an ignition source (such as a furnace,

water heater, etc.) and cause an explosion. Fuel

vapor is also toxic to humans and animals.

When Storing Fuel Or Equipment With Fuel In Tank

t 4UPSFBXBZGSPNGVSOBDFTTUPWFTXBUFSIFBUFSTPS

appliances that have pilot lights or other ignition sources

because they can ignite fuel vapors.

Equipment

Battery life will be increased if it is removed. Put in a cool,

dry place and fully charged about once a month. If the

battery is left in the unit, disconnect the negative cable.

Fuel System

Fuel can become stale when stored over 30 days. Stale fuel

causes acid and gum deposits to form in the fuel system or

on essential carburetor parts. To keep fuel fresh, use Briggs

& Stratton FUEL FIT® fuel stabilizer, available as a liquid

additive or a drip concentrate cartridge.

There is no need to drain gasoline from the engine if a fuel

stabilizer is added according to instructions. Run the engine

for 2 minutes to circulate the stabilizer throughout the fuel

system. The engine and fuel can then be stored up to 24

months.

If gasoline in the engine has not been treated with a fuel

stabilizer, it must be drained into an approved container.

Run the engine until it stops from lack of fuel. The use of a

fuel stabilizer in the storage container is recommended to

maintain freshness.

Engine Oil

While the engine is still warm, change the engine oil. See the

Engine Manual.

Before starting the unit after it has been stored:

t $IFDLBMMGMVJEMFWFMT$IFDLBMMNBJOUFOBODFJUFNT

t 1FSGPSNBMMSFDPNNFOEFEDIFDLTBOEQSPDFEVSFTGPVOE

in this manual.

t "MMPXUIFFOHJOFUPXBSNVQGPSTFWFSBMNJOVUFTCFGPSF

use.

Order Replacement Parts

Warranty service is available only through Authorized Service

Dealers. Locate your nearest dealer in our locator map at

www.murray.com.

Not for

Reproduction

16 murray.com

Troubleshooting

PROBLEM LOOK FOR REMEDY

Engine will not turnover

or start.

Brake pedal not depressed. Fully depress brake pedal.

PTO (electric clutch) switch is in

ON position.

Place in OFF position.

Cruise control engaged. Move knob to NEUTRAL/OFF position.

Out of fuel. If engine is hot, allow it to cool, then refill the fuel tank.

Engine flooded. Disengage the choke.

Fuse is blown. See authorized dealer.

Battery terminals require

cleaning.

See Maintenance Free Battery section.

Battery discharged or dead. Recharge or replace battery.

Wiring loose or broken. Visually check wiring. If wires are frayed or broken, see authorized dealer.

Solenoid or starter motor faulty. See authorized dealer.

Safety interlock switch faulty. See authorized dealer.

Water in fuel. See authorized dealer.

Gas is old or stale. See authorized dealer.

Engine starts hard or runs

poorly.

Fuel mixture too rich. Clean air filter.

Engine has other problem. See authorized dealer.

Engine knocks.

Low oil level. Check/add oil as required.

Using wrong grade oil. See the Engine Manual.

Excessive oil consumption.

Engine running too hot. See authorized dealer.

Using wrong grade oil. See the Engine Manual.

Too much oil in crankcase. Drain excess oil.

Engine exhaust is black.

Dirty air filter. See the Engine Manual.

Choke closed. Open choke.

Engine runs, but tractor will

not drive.

Ground speed control pedals

not depressed.

Depress pedals.

Transmission release lever in

PUSH position.

Move into DRIVE position.

Mower drive belt is broken. See authorized dealer.

Parking brake is engaged. Disengage parking brake.

Traction drive belt is broken or

slipping.

See authorized dealer.

Troubleshooting the Tractor

Not for

Reproduction

17

PROBLEM LOOK FOR REMEDY

Mower will not raise.

Lift linkage not properly attached

or damaged.

See authorized dealer.

Mower cut is uneven.

Mower not leveled properly. See authorized dealer.

Tractor tires not properly

inflated.

See Check Tire Pressure section.

Mower cut is rough

looking.

Engine speed too slow. Set to full throttle.

Ground speed too fast. Slow down.

Mower has other problem. See authorized dealer.

Engine stalls easily with

mower engaged.

Engine speed too slow. Set to full throttle.

Ground speed to fast. Slow down.

Dirty or clogged air filter. See the Engine Manual.

Cutting height set too low. Cut tall grass at maximum cutting height during first pass.

Discharge chute jamming. Cut grass with discharge pointing toward previously cut area.

Engine not up to operating

temperature.

Run engine for several minutes to warm-up.

Starting mower in tall grass. Start the mower in a cleared area.

Excessive mower vibration.

Mower has other problem. See authorized dealer.

Engine runs and tractor

drives, but mower will not

drive.

Blade rotation control not

engaged.

Engage blade rotation control.

Mower has other problem. See authorized dealer.

Troubleshooting the Mower

PROBLEM LOOK FOR REMEDY

Brake will not hold.

Internal brake worn. See authorized dealer.

Tractor steers hard or

handles poorly.

Steering linkage is loose. See authorized dealer.

Improper tire inflation. See Check Tire Pressure section.

Front wheel spindle bearings

dry.

See authorized dealer.

Troubleshooting the Tractor (Continued)

Not for

Reproduction

18 murray.com

BRIGGS & STRATTON POWER PRODUCTS GROUP, L.L.C. OWNER WARRANTY POLICY

LIMITED WARRANTY

Briggs & Stratton Power Products Group, LLC will repair and/or replace, free of charge, any part(s) of the equipment

that is defective in material or workmanship or both. Briggs & Stratton Corporation will repair and/or replace, free of

charge, any part(s) of the Briggs and Stratton engine* (if equipped) that is defective in material or workmanship or both.

Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser.

This warranty is effective for the time periods and subject to the conditions stated below. For warranty service, ﬁnd the

nearest Authorized Service Dealer using our dealer locator at www.Murray.com.

There is no other express warranty. Implied warranties, including those of merchantability and ﬁtness for a particular

purpose, are limited to one year from purchase or to the extent permitted by law. Liability for incidental or consequential

damages are excluded to the extent exclusion is permitted by law.

Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do

not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may

not apply to you. This warranty gives you speciﬁc legal rights and you may also have other rights which vary from state to

state or country to country.

WARRANTY PERIOD

The warranty period begins on the date of purchase by the ﬁrst retail consumer or commercial end user, and continues for the

period of time stated above. “Consumer use” means personal residential household use by a retail consumer. “Commercial

use” means all other uses, including use for commercial, income producing or rental purposes. Once product has experienced

commercial use, it shall thereafter be considered as commercial use for purposes of this warranty.

No warranty registration is necessary to obtain warranty on Briggs & Stratton products. Save your proof of purchase receipt. If you

do not provide proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the product

will be used to determine warranty eligibility.

ABOUT YOUR WARRANTY

We welcome warranty repair and apologize to you for being inconvenienced. Warranty service is available only through servicing

dealers authorized by Briggs & Stratton or BSPPG, LLC.

Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. This warranty

only covers defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper

maintenance or repair, normal wear and tear, or stale or unapproved fuel.

Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual. Using the product in

a way not described in the Operator’s Manual or using the product after it has been damaged will void your warranty. Warranty

is not allowed if the serial number on the product has been removed or the product has been altered or modiﬁed in any way, or if

the product has evidence of abuse such as impact damage, or water/chemical corrosion damage.

Improper Maintenance or Repair - This product must be maintained according to the procedures and schedules provided in the

Operator’s Manual, and serviced or repaired using genuine Briggs & Stratton parts. Damage caused by lack of maintenance or

use of non-original parts is not covered by warranty.

Normal Wear - Like all mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not

cover repairs when normal use has exhausted the life of a part or the equipment. Maintenance and wear items such as ﬁlters,

belts, cutting blades, and brake pads (engine brake pads are covered) are not covered by warranty due to wear characteristics

alone, unless the cause is due to defects in material or workmanship.

Stale Fuel - In order to function correctly, this product requires fresh fuel that conforms to the criteria speciﬁed in the Operator’s

Manual. Damage caused by stale fuel (carburetor leaks, clogged fuel tubes, sticking valves, etc) is not covered by warranty.

* Applies to Briggs and Stratton engines only. Warranty coverage of non-Briggs and Stratton engines is provided by the engine manufacturer.

Item Consumer Use Commercial Use:

Equipment 2 Years 90 Days

Engine* 2 Years 90 Days

Battery 1 Year 1 Year

EN

Not for

Reproduction

Sayfa yükleniyor...

Simplicity 7800413 Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Simplicity 7800413 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler