Yamaha TSX-B72 Kullanım kılavuzu

G

En Fr De

OWNER'S MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Sv It Es

Nl

Ru

i En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture and cold. For proper

ventilation, allow the following minimum clearances.

Top: 15 cm (6 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room

with a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cable disconnected from a wall outlet or this unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press to set the system to

off, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the system off, then leave this

unit alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 Be sure to use the AC adaptor supplied with this unit.

Using an AC adaptor other than the one provided

may cause fire or damage to this unit.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off by . In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

There is a chance that placing this unit too close to a

CRT-based (Braun tube) TV set might impair picture

color. Should this happen, move this unit away from the

TV set.

Do not use this unit within 22 cm (9 inches) of persons

with a heart pacemaker implant or defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside

medical facilities.

We, Yamaha Music Europe GmbH hereby

declare that this unit is in compliance with the

essential requirements and other relevant

provisions of Directive 1999/5/EC.

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen, Germany

Tel: +49-4101-303-0

1 En

En

PREPARATION

■ Features

– High quality playback of Bluetooth enabled smartphone/tablet computer, and radio and external devices.

One touch pairing enabled by NFC technology.

– Firm bass sound and spacious stereo sound from 2.1 ch powered speaker (tweeter × 2, woofer × 1),

SR-Bass™ (Yamaha Swing Radiator Bass technology) and DSP in a compact unit.

– Easy user-intuitive interface by buttons with Guide LED and knob dials.

– Convenient operability enabled by using iPhone/Android smartphone as a remote control.

Supports the dedicated application, “DTA CONTROLLER.”

– USB port for supplying power.

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

■ Supplied accessories

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products, please contact your local

municipality, your waste disposal service or the point of sale where you purchased the items.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

NAMES OF PARTS AND THEIR FUNCTIONS .................................................................................... 2

BASIC FUNCTIONS................................................................................................................................... 4

USING USEFUL FUNCTIONS ................................................................................................................. 6

LISTENING TO RADIO STATIONS....................................................................................................... 8

CHARGING WITH THE USB PORT ......................................................................................................9

LISTENING TO EXTERNAL SOURCES ............................................................................................... 9

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT ................................................... 10

TROUBLESHOOTING ............................................................................................................................ 13

SPECIFICATIONS ................................................................................................................................... 15

Note

y

AC adaptor Power cable

(DC 15 V, 2.56A,

model number:

EADP-38EB A)

USB cap

Note

Keep the USB cap out of reach

of children so as to ensure that

it is not mistakenly swallowed.

CONTENTS

2 En

■ Front panel

■ Top panel

NAMES OF PARTS AND THEIR FUNCTIONS

1 Front panel display

2 SOURCE: Bluetooth, AUX, RADIO

3 VOLUME: Volume control

4 PRESET: Stores up to five favorite FM radio

stations (☞ P. 8).

5 Illumination sensor: Measures surrounding

illuminance. Do not cover this sensor when

DIMMER (d) is set to A (auto).

6 CHARGING: Supplies 5V/2.1A to a portable

device, such as a smartphone, when it is connected

with a USB cable (☞ P. 9).

7 (Bluetooth): Press this button:

– to terminate Bluetooth connection when it is

established (☞ P. 12).

– to establish connection with the component that

was most recently connected via Bluetooth

(☞ P. 12).

8 : Press to turn the system on/off.

Time is displayed even when the system is off.

y

• Press and hold for more than 3 seconds to set the

system to standby mode. All the information on the

front panel display is not displayed in standby mode.

This can reduce power consumption. To cancel standby

mode, press .

• Even in system off/standby mode, the alarm function is

available.

NAMES OF PARTS AND THEIR FUNCTIONS

3 En

En

■ Rear panel

9 ALARM: Alarm on/off (☞ P. 5)

0 SET: Alarm setting (☞ P. 4)

A NFC mark: Allows easy pairing with NFC

technology (☞ P. 11).

B SNOOZE/SLEEP (☞ P. 5)

C MEMORY (☞ P. 8)

D DIMMER: Sets the brightness of the top and front

panel

A (auto) 3 (brightest) 2 1 (darkest)

back to A

y

When A (auto) is set, the brightness of the top and front

panel is adjusted automatically according to the

brightness of the room.

E TUNING (☞ P. 8)

■ Extending rod antenna

15V : Connect the supplied

AC adaptor and power cable.

AUX: Connect an external

device. (☞ P. 9)

FM Rod Antenna

(See below.)

ALARM TYPE switch (☞ P. 4)

CLOCK switch (☞ P. 4)

• When you listen to FM, extend the

antenna.

• If FM reception is poor, change the

height or direction of the antenna, or

relocate the unit.

Notes

FM Rod Antenna

4 En

OPERATION

This unit can play back radio and/or beep sound at the set time.

■ Setting the time and sound

BASIC FUNCTIONS

Adjusting the clock

A Set CLOCK to SET.

B Set the time with TUNING.

C Set CLOCK to LOCK.

The time settings are lost approximately one

week after unplugging the unit.

Alarm setting

A Press SET.

B Set the alarm time with

TUNING.

An alarm will sound only once at the

specified time.

C Set ALARM TYPE.

• SOURCE+BEEP: radio (played

back from 3 minutes before the

alarm time) and beep sound (played

back at the alarm time)

• SOURCE: this unit plays back the

radio station you listened to last

time.

• BEEP: beep sound only

D Set the alarm volume.

E Press SET.

Alarm is set and the alarm indicator

( ) lights up.

Rear panel

Front panel display

flashes.

Note

Alarm indicator ( )

flashes and the front

panel display indicates

alarm mode.

Rear panel

BASIC FUNCTIONS

5 En

En

■ Switching the alarm on/off

At the set time, alarm sound plays back. During playback, operations below are available.

■ Using the snooze function

■ Stopping the alarm

You can set the time until the system turns off automatically when the sleep function is set to on.

Press ALARM.

When the alarm is on, the alarm

indicator ( ) lights up and alarm

time is displayed for a while.

Operations during playing back alarm sound

Press SNOOZE/SLEEP.

The alarm sound stops and resumes

after 5 minutes.

y

•If SOURCE+BEEP is set as the alarm type,

you can press SNOOZE/SLEEP once to

stop the beep sound, and twice to stop the

audio source. Five minutes after the audio

source is stopped, it will start fading in again

and the beep sound will resume.

• When the snooze function is activated, alarm

indicator flashes.

Press ALARM or .

y

• Unless you stop the alarm, the alarm stops

after 60 minutes automatically.

• When you stop the alarm, the alarm time

setting, etc., is saved for convenient use next

time.

Sleep setting

Select the sleep time.

You can set 30, 60, 90 or 120 minutes.

When the sleep function is on, the

sleep indicator ( ) lights up.

y

To cancel the sleep function, press SNOOZE/

SLEEP.

Sleep indicator ( ) and front

panel display flash.

Press repeatedly.

6 En

OPERATION

• If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.

• iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• Android and Google Play are trademarks of Google, Inc.

USING USEFUL FUNCTIONS

DTA CONTROLLER

With the DTA CONTROLLER application installed on your smartphone or tablet

computer, you can use further convenient features of Yamaha desktop audio systems.

To download the application, or obtain the latest information on it, access App Store or

Google Play via the QR codes listed below.

iPhone, iPad, iPod touch Android™

http://itunes.com/app/dtacontroller https://play.google.com/store/apps/

details?id=com.yamaha.av.dtacontr

oller

(U.S.A.)

https://itunes.apple.com/us/app/dta-

controller-us/id549333293?mt=8

Notes

USING USEFUL FUNCTIONS

7 En

En

Once you have set Weekly Alarm by “DTA CONTROLLER”, you can select the Weekly Alarm mode in the

alarm mode select display of this unit.

Alarm setting using DTA CONTROLLER

The Weekly Alarm mode cannot be selected

when all the days of the Weekly Alarm setting

are turned off. Turn on any day of the Weekly

Alarm setting.

A Press SET.

B Select the alarm mode with

TUNING.

C Press SET.

• If you have chosen Weekly Alarm

mode, this completes the alarm

setting. The alarm indicator ( )

and the Weekly Alarm indicator

( ) will light up.

D Set the alarm time with

TUNING.

E Set ALARM TYPE.

F Set the alarm volume.

G Press SET.

Alarm is set and the alarm indicator

( ) lights up.

y

The alarm setting will be saved even if the

alarm is turned off.

If the alarm is turned on again by pressing

ALARM, the alarm will sound with the

previous alarm settings.

One Day Alarm

Weekly Alarm

1d (One Day Alarm mode):

An alarm that sounds only once at the

specified time.

7d (Weekly Alarm mode):

An alarm whose time can be specified

for each day of the week (settable

only using “DTA CONTROLLER”).

Note

One Day Alarm

Weekly Alarm

Alarm indicator ( )

flashes and the front

panel display indicates

alarm mode.

Rear panel

8 En

You can store up to five favorite FM radio stations with the preset function.

LISTENING TO RADIO STATIONS

Tuning radio stations

A Set SOURCE to RADIO.

B For automatic tuning, press

and hold TUNING.

For manual tuning, press

TUNING repeatedly.

If you tune to a station manually during FM

reception, the sound is monaural.

Presetting radio stations

A Tune into a favorite radio

station.

B Press MEMORY.

C Select the PRESET number

you want to store to.

y

To cancel the preset, press TUNING again.

D Press MEMORY to complete.

Selecting preset radio stations

A Set SOURCE to RADIO.

B Select the preset radio station

with PRESET.

Note

9 En

En

Connecting a portable device such as a smartphone or tablet computer to the USB port on this unit charges the

connected device (power supply of up to 5V/2.1A is supported).

Prepare a USB cable that is compatible with the portable device and confirm that the device is supported for

charging via USB connection before use. In addition, read the documentation provided with the portable

device.

■ Playing back

CHARGING WITH THE USB PORT

A

Connect your portable device

to the USB port on this unit

using a commercially available

USB cable.

Charging automatically starts.

B Disconnect the USB cable

from the unit when charging

completes.

Check the charging status on the

portable device.

• Charging may not be possible depending on

the portable device.

• The USB port is for charging use only. The

USB port does not support audio playback.

• In standby mode, power supply stops, and

charging is not available.

• This unit does not function as memory

storage.

• Yamaha will not be held responsible for any

damage to the portable device or data loss

occurred while using this unit.

• Disconnect the USB cable immediately after

charging completes, since power continues to

be supplied to the connected device.

LISTENING TO EXTERNAL SOURCES

Playing back external sources

A Connect your portable audio

device to AUX using a

commercially available 3.5 mm

(1/8 in) mini plug cable.

Turn down the volume of this unit and your

portable audio device before connection.

B Set SOURCE to AUX.

C

Start playback on the connected

portable audio device.

USB cable from portable device

Top panel

Notes

Rear panel

Note

10 En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth

component (smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth

component.

Install in a stable place, being careful of the following points:

• Do not place on top of steel or other metal plates.

• Do not cover with a cloth, etc.

• Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP

compatible portable music player, mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft).

• Make sure there are no obstacles between this unit and the Bluetooth component.

Pairing is an operation that registers the communicating component (subsequently called “the other

component”) with this unit. You will need to perform the pairing operation the first time you use your

Bluetooth component with this unit, or if the pairing settings have been deleted. Once pairing has been

completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing

is not successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” (☞ P. 13).

y

• This unit can be paired with up to eight other components. When pairing with the ninth component has succeeded, pairing

data for the component with the oldest connection date will be deleted.

• If this unit is connected via Bluetooth to another component, press (Bluetooth) on this unit to disconnect the Bluetooth

connection before you perform the pairing operation.

■ If using an iPhone/iPad/iPod touch

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Installation

Within 10 m (33 ft)

Pairing this unit with your Bluetooth component

A

Set

SOURCE

to (Bluetooth).

B On your iPhone/iPad/iPod

touch, turn [Settings]

[Bluetooth] on.

The Bluetooth connection list will

appear in [Devices].

(This procedure or display may differ

depending on the type of your iPhone/

iPad/iPod touch.)

C From the Bluetooth connection

list of the other component,

choose this unit (TSX-B72

Yamaha).

When pairing has been completed,

your iPhone/iPad/iPod touch will

indicate “Connected”.

The Bluetooth indicator on the front

panel display of this unit will light.

Bluetooth indicator

ABC

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

11 En

En

■ If using other than an iPhone/iPad/iPod touch

A Set SOURCE to (Bluetooth).

B Perform Bluetooth pairing on the other component.

For details, refer to the owner’s manual of the other component.

C From the Bluetooth connection list of the other component, choose this unit (TSX-B72

Yamaha).

When pairing has been completed, the Bluetooth indicator on the front panel display of this unit will light

for about 1 second.

y

If you are prompted for a passkey, enter the numerals “0000”.

■ Easy pairing

For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing

operation just by touching the NFC mark on this unit with your smartphone (you need to turn the system on and

turn on the NFC function of the connecting component beforehand).

A

Press to turn the system on.

B Perform the pairing operation

at the connecting component

(for details, please read the

owner’s manual of the

connecting component).

This unit is indicated as “TSX-B72

Yamaha” on the connecting

component.

y

• If you are prompted for a passkey, enter the

numerals “0000”.

• If the connection fails, move the

smartphone slowly on the NFC mark.

• If the smartphone is equipped with a case,

remove the case.

NFC

mark

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

12 En

Once pairing with a component has been completed, connecting with that component via Bluetooth will be

easy next time.

■ Connecting from this unit

Set SOURCE to (Bluetooth).

The Bluetooth indicator will blink on the front panel display; this unit will search for the other component

that was most recently connected via Bluetooth, and will then establish a connection (You must first turn on

the Bluetooth setting of the other component).

When the Bluetooth connection has been established, the Bluetooth indicator will light.

Yamaha does not guarantee all connections between this unit and Bluetooth component.

y

Pressing (Bluetooth) on the top panel of this unit also establishes connection with the component that was most recently

connected via Bluetooth; however, SOURCE is not automatically set to (Bluetooth).

■ Connecting from the other component

A In the Bluetooth settings of the other component, turn Bluetooth on.

B From the Bluetooth connection list of the other component, choose this unit (TSX-B72

Yamaha).

The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this

unit will light.

Bluetooth connections cannot be established from the other component when this unit is in standby mode. Turn the system on.

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth

connection will be disconnected.

• Press (Bluetooth) on the top panel of this unit.

• Turn the system off.

• Turn off the Bluetooth setting of the other component.

Listening to a Bluetooth component

A

Set

SOURCE

to (Bluetooth).

B Connect this unit and your other

component via Bluetooth.

C Play back music from your Bluetooth

component.

Take care that the volume setting of this unit is not too high. We

recommend that you adjust the volume on the other component.

y

• While the system is turned off, if you connect a Bluetooth

component to the unit and play back music, the system will

automatically turn on.

• If you disconnect the Bluetooth connection from your other

component while the playback source is set to Bluetoo th, this

unit will automatically turn off the system.

•If Bluetooth is selected as the playback source, this unit will

automatically turn off the system when 60 minutes have

elapsed without any Bluetooth connection nor any operation

performed.

Connecting an already-paired component via Bluetooth

Bluetooth

indicator

Note

Disconnecting a Bluetooth connection

13 En

En

Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed

below, or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the

nearest authorized Yamaha dealer or service center.

TROUBLESHOOTING

General

Problem Cause Solution

The speakers make no

sound.

The volume may be set to the minimum

level.

Adjust the volume level.

The source may be incorrect. Select the correct source.

Sound suddenly turns off.

The sleep function (☞ P. 5) may be set. Turn on the system and play the source again.

Sound is cracked/

distorted or there is

abnormal noise.

Input source volume is excessive, or

volume of this unit is excessive.

Adjust the volume with VOLUME, or adjust

the sound with the tone control of DTA

CONTROLLER.

The unit does not operate

properly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity, or power

supply may have dropped.

Set the system to off, and disconnect the

power cable. Wait about 30 seconds,

reconnect the power cable, and turn on the

system.

The system turns on but

immediately shuts off.

The power cable may be connected

improperly.

Make sure the power cable is plugged into the

wall outlet firmly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity.

Set the system to off, and disconnect the

power cable. Wait about 30 seconds,

reconnect the power cable, and turn on the

system.

A digital or high-frequency

equipment produces

noises.

The unit may be placed too close to the

digital or high-frequency equipment.

Place the unit farther away from the

equipment.

The clock setting has been

cleared.

The unit is left more than one week after

you disconnect the power cable from the

wall outlet.

Plug the power cable into the wall outlet

firmly, and set the clock again (☞ P. 4).

RADIO does not play at

the alarm time.

ALARM TYPE is set to BEEP.Set ALARM TYPE to SOURCE+BEEP or

SOURCE (☞ P. 4).

Clock flashes and the unit

cannot be operated.

CLOCK on the rear panel is set to SET,

and this unit is in clock setting mode.

Set CLOCK to LOCK.

Radio reception

Problem Cause Solution

Too much noise during

stereo broadcast.

The radio station you selected may be far

from your area, or the radio wave

reception is weak in your area.

Try manual tuning to improve the signal

quality (☞ P. 8) or change the height or

direction of the antenna, or relocate the unit

(☞ P. 3).

TROUBLESHOOTING

14 En

■ Resetting the unit

If the unit does not function properly, resetting the unit may solve the problem. To reset the unit, press and hold

for more than 10 seconds.

Bluetooth

Problem Cause Solution

Cannot make this unit

paired with the other

component.

The other component does not support

A2DP.

Perform pairing operations with a component

which supports A2DP.

A Bluetooth adaptor, etc. that you want to

pair with this unit has a password other

than “0000”.

Use a Bluetooth adaptor, etc. whose password

is “0000”.

This unit and the other component are too

far apart.

Move the other component closer to this unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

Cannot establish a

Bluetooth connection.

This unit is not registered on the other

component’s Bluetooth connection list.

Perform pairing operations again (☞ P. 10).

No sound is produced or

the sound is interrupted

during playback.

The Bluetooth connection of this unit with

the other component is disconnected.

Perform Bluetooth connection operations

again (☞ P. 12).

This unit and the other component are too

far apart.

Move the other component closer to this unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

The other component’s Bluetooth

function is off.

Turn on the Bluetooth function of the other

component.

The other component is not set to send

Bluetooth audio signals to this unit.

Check that the Bluetooth function of the other

component is set properly.

The pairing setting of the other

component is not set to this unit.

Set the pairing setting of the other component

to this unit.

The other component’s volume is set to

the minimum.

Increase the volume level.

USB port charging

Problem Cause Solution

Cannot charge the

connected portable USB

device.

An incompatible USB device is connected

to the unit. Or the USB device is not

connected to this unit properly.

Turn off the system and reconnect the USB

device to the unit. If it does not resolve the

problem, the USB device is not chargeable

with the unit.

15 En

En

■ PLAYER SECTION

AUX IN

• Input connector

............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack

■ AMPLIFIER SECTION

• Maximum output power..........................4 W + 4 W + 8 W

(6 Ω 1 kHz, 10% THD)

• Driver unit ...................4 cm (1 5/8 in) full-range driver × 2

5.5 cm (2 1/8 in) woofer + SR-Bass × 1

■ Bluetooth SECTION

• B luetooth version...........................................Ver. 2.1+EDR

• Supported protocols.....................................A2DP, AVRCP

• Supported codecs................................................SBC, AAC

• Wireless output.........................................Bluetooth Class 2

• Maximum communication distance

...................................... 10 m (33 ft) (without obstructions)

• Supported contents protection .................. SCMS-T method

■ TUNER SECTION

• Tuning range

FM....................................................87.5 to 108.0 MHz

■ CHARGING CONNECTOR SECTION

• Connector type..................................................USB type A

• Output rating.........................................................5 V/2.1 A

■ NFC (Near Field Communication)

SECTION

• Supported model

.............................NFC-ready Android device Ver. 4.1, 4.2

* Some models may not work or be different in the required

distance for connection.

■ GENERAL

• Power Supply........................... AC 100 to 240 V, 50/60 Hz

• Power consumption .....................................................22 W

• System off consumption .............................................1.9 W

• Standby consumption...................................... 0.5 W or less

• Dimensions (W × H × D)....................210 × 110 × 144 mm

(8 1/4 × 4 3/8 × 5 5/8 in)

• Weight......................................................... 1.4 kg (3.1 lbs.)

Specifications are subject to change without notice.

Bluetooth

• Bl uetooth is a technology for wireless communication

between devices within an area of about 10 meters (33 ft)

employing the 2.4 GHz frequency band, a band which can

be used without a license.

• Bl uetooth is a registered trademark of the Bluetooth SIG

and is used by Yamaha in accordance with a license

agreement.

Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices

is a radio band shared by many types of equipment. While

Bluetooth compatible devices use a technology

minimizing the influence of other components using the

same radio band, such influence may reduce the speed or

distance of communications and in some cases interrupt

communications.

• The speed of signal transfer and the distance at which

communication is possible differs according to the

distance between the communicating devices, the

presence of obstacles, radio wave conditions and the type

of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with Bluetooth

function.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K.

Model

SPECIFICATIONS

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED

IN ACCORDANCE WITH THE FOLLOWING

CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Make sure that neither core is connected to the earth

terminal of the three pin plug.

Note

i Fr

1 Pour utiliser l’appareil au mieux de ses possibilités,

lisez attentivement ce mode d’emploi. Conservez-le

soigneusement pour référence.

2 Installez cet appareil dans un endroit frais, bien aéré,

sec et propre - à l’abri de la lumière du soleil, des

sources de chaleur, des vibrations, des poussières, de

l’humidité et du froid. Pour une aération correcte,

tenez compte des distances minimales suivantes.

Au-dessus : 15 cm

À l’arrière : 10 cm

Sur les côtés : 10 cm

3 Placez l’appareil loin des équipements, moteurs et

transformateurs électriques, pour éviter les

ronflements parasites.

4 N’exposez pas l’appareil à des variations brutales de

température, ne le placez pas dans un environnement

très humide (par exemple dans une pièce contenant

un humidificateur) car cela peut entraîner la

condensation d’humidité à l’intérieur de l’appareil

qui elle-même peut être responsable de décharge

électrique, d’incendie, de dommage à l’appareil ou de

blessure corporelle.

5 Evitez d’installer l’appareil dans un endroit où des

objets peuvent tomber, ainsi que là où l’appareil

pourrait être exposé à des éclaboussures ou des

gouttes d’eau. Sur le dessus de l’appareil, ne placez

pas :

– d’autres appareils qui peuvent endommager la

surface de l’appareil ou provoquer sa

décoloration.

– des objets se consumant (par exemple, une

bougie) qui peuvent être responsables d’incendie,

de dommage à l’appareil ou de blessure

corporelle.

– des récipients contenant des liquides qui peuvent

être à l’origine de décharge électrique ou de

dommage à l’appareil.

6 Ne couvrez pas l’appareil d’un journal, d’une nappe,

d’un rideau, etc. car cela empêcherait l’évacuation de

la chaleur. Toute augmentation de la température

intérieure de l’appareil peut être responsable

d’incendie, de dommage à l’appareil ou de blessure

corporelle.

7 Ne branchez pas la fiche du câble d’alimentation de

l’appareil sur une prise secteur aussi longtemps que

tous les raccordements n’ont pas été effectués.

8 Ne pas faire fonctionner l’appareil à l’envers. Il

risquerait de chauffer et d’être endommagé.

9 N’exercez aucune force excessive sur les

commutateurs, les boutons et les cordons.

10 Pour débrancher la fiche du câble d’alimentation au

niveau de la prise secteur, saisissez la fiche et ne tirez

pas sur le cordon.

11 Ne nettoyez pas l’appareil au moyen d’un solvant

chimique, ce qui pourrait endommager la finition.

Utilisez un chiffon sec et propre.

12 N’alimentez l’appareil qu’à partir de la tension

prescrite. Alimenter l’appareil sous une tension plus

élevée est dangereux et peut être responsable

d’incendie, de dommage à l’appareil ou de blessure

corporelle. Yamaha ne saurait être tenue responsable

des dommages résultant de l’alimentation de

l’appareil sous une tension autre que celle prescrite.

13 Pour empêcher tout dommage causé par les éclairs,

déconnectez la câble d’alimentation et toute antenne

extérieure de la prise murale pendant un orage.

14 Ne tentez pas de modifier ni de réparer l’appareil.

Consultez le service Yamaha compétent pour toute

réparation qui serait requise. Le coffret de l’appareil

ne doit jamais être ouvert, quelle que soit la raison.

15 Si vous envisagez de ne pas vous servir de l’appareil

pendant une longue période (par exemple, pendant

les vacances), débranchez la fiche du câble

d’alimentation au niveau de la prise secteur.

16 Lisez la section intitulée « GUIDE DE

DÉPANNAGE » où figurent une liste d’erreurs de

manipulation communes avant de conclure que

l’appareil présente une anomalie de fonctionnement.

17 Avant de déplacer l’appareil, appuyez sur pour

éteindre le système puis débranchez la fiche du câble

d’alimentation au niveau de la prise secteur.

18 La condensation se forme lorsque la température

ambiante change brusquement. En ce cas, débranchez

la fiche du câble d’alimentation et laissez l’appareil

reposer.

19 La température de l’appareil peut augmenter en

raison d’une utilisation prolongée. En ce cas, coupez

l’alimentation de l’appareil et laissez-le au repos pour

qu’il refroidisse.

20 Installez cet appareil à proximité de la prise secteur et

à un emplacement où la fiche du câble d’alimentation

est facilement accessible.

21 Utilisez l’adaptateur secteur fourni avec cet appareil.

L’emploi de tout autre adaptateur secteur peut causer

un incendie ou endommager l’appareil.

ATTENTION : VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER

L’APPAREIL.

Cet appareil n’est pas déconnecté du secteur tant qu’il

reste branché à la prise de courant, même si l’appareil en

soi est éteint par la touche . Dans cet état, l’appareil

consomme une très faible quantité de courant.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE

DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET

APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

Il y a un risque possible de création d’interférences,

visibles sur les images en couleurs si cet appareil est placé

à côté d’un téléviseur à tube cathodique (tube de Braun).

Dans ce cas, éloigner l’unité du téléviseur.

Ne pas utiliser cet appareil à moins de 22 cm de

personnes ayant un stimulateur cardiaque ou un

défibrillateur.

Les ondes radio peuvent avoir une incidence sur les

équipements électroniques médicaux.

N’utilisez pas cet appareil à proximité d’équipements

médicaux ou à l’intérieur d’institutions médicales.

1 Fr

Fr

PREPARATION

■ Caractéristiques

– Lecture de qualité supérieure du smartphone/de la tablette compatible Bluetooth et des dispositifs radio et

externes.

Appariement par simple contact avec la technologie NFC.

– Son grave ferme et son stéréo spacieux depuis un haut-parleur à 2.1 canaux (haut-parleur d’aigus × 2,

haut-parleur de graves × 1), SR-Bass™ (technologie Yamaha Swing Radiator Bass) et DSP dans un

appareil compact.

– Interface à boutons facile et intuitive pour l’utilisateur avec DEL guides et molettes.

– Utilisation pratique activée par un smartphone iPhone/Android en guise de télécommande.

Prend en charge l’application dédiée « DTA CONTROLLER ».

– Port USB pour l’alimentation.

• indique les précautions d’utilisation de l’appareil et ses limitations fonctionnelles.

• donne des explications supplémentaires pour une meilleure utilisation.

■ Accessoires fournis

Information concernant la Collecte et le Traitement des déchets

d’équipements électriques et électroniques

Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou

électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et

électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la

réglementation nationale et aux Directives 2002/96/EC.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous

contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la

santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets.

Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et

électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de

vente où vous avez acheté les produits.

[Information sur le traitement dans d’autres pays en dehors de l’Union Européenne]

Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de

déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre

fournisseur et demander la méthode de traitement appropriée.

NOM ET FONCTION DES PIÈCES......................................................................................................... 2

FONCTIONS DE BASE.............................................................................................................................. 4

UTILISATION DES FONCTIONS UTILES............................................................................................ 6

ÉCOUTE DES STATIONS RADIO .......................................................................................................... 8

CHARGE AVEC LE PORT USB .............................................................................................................. 9

ÉCOUTE DE SOURCES EXTERNES......................................................................................................9

ÉCOUTE DE MUSIQUE AVEC VOTRE PÉRIPHÉRIQUE Bluetooth ............................................. 10

GUIDE DE DÉPANNAGE ....................................................................................................................... 13

CARACTÉRISTIQUES TECHNIQUES ................................................................................................ 15

Remarque

y

Adaptateur secteur Câble d’alimentation

(15 V CC, 2,56 A,

numéro de modèle :

EADP-38EB A)

Capuchon USB

Remarque

Tenez le capuchon USB hors de

portée des enfants afin d’éviter

toute ingestion accidentelle.

TABLE DES MATIÈRES

2 Fr

■ Panneau avant

■ Panneau supérieur

NOM ET FONCTION DES PIÈCES

1 Afficheur

2 SOURCE : Bluetooth, AUX, RADIO

3 VOLUME : Réglage du volume

4 PRESET : Mémorise jusqu’à cinq stations radio FM

favorites (☞ P. 8).

5 Capteur d’illumination : Mesure le niveau

d’illumination ambiante. Ne couvrez pas ce capteur

lorsque DIMMER (d) est réglé sur A (auto).

6 CHARGING : Alimente en 5 V/2,1 A un dispositif

portable, comme un smartphone, lorsque celui-ci

est branché avec un câble USB (☞ P. 9).

7 (Bluetooth): Appuyez sur cette touche :

– pour mettre fin à la connexion Bluetooth une fois

celle-ci établie (☞ P. 12).

– pour établir la connexion avec le dernier

périphérique connecté via Bluetooth

(☞ P. 12).

8 : Appuyez pour allumer/éteindre le système.

L’heure est affichée même lorsque le système est

éteint.

y

• Appuyez et maintenez enfoncé pendant plus de

3 secondes pour mettre le système en mode veille.

Toutes les informations de l’afficheur ne s’affichent

pas en mode veille. Cela peut réduire la consommation

d’électricité. Pour annuler le mode veille, appuyez sur

.

• Si le système est éteint/en mode veille, la fonction

d’alarme est disponible.

Sayfa yükleniyor ...

Yamaha TSX-B72 Kullanım kılavuzu

Bu kılavuz için de uygundur

Yamaha TSX-B72 Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler

Diğer Belgeler