Yamaha ISX-803 El kitabı

Kategori
Alıcı
Tip
El kitabı

Bu kılavuz için de uygundur

INTEGRATED AUDIO SYSTEM
SYSTÈME AUDIO INTÉGRÉ
G
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
i En
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit in a well ventilated, cool, dry, clean place
– away from direct sunlight, heat sources, vibration, dust,
moisture and cold. For proper ventilation, allow the
following minimum clearances.
Top: 15 cm (6 in)
Rear: 2.5 cm (1 in)
Sides: 10 cm (4 in)
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes
from cold to hot (or vice versa), and do not locate this
unit in an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside this
unit, which may cause an electrical shock, fire, damage to
this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not
place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e., candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage
other than specified.
13 To prevent damage by lightning, keep the power cable
and outdoor antennas disconnected from a wall outlet or
this unit during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
15 When not planning to use this unit for long periods of
time (i.e., vacation), disconnect the AC power plug from
the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit
is faulty.
17 Before moving this unit, press to set the system to off,
and disconnect the AC power plug from the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the system off, then leave this unit
alone for cooling.
20 Install this unit near the wall outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
Keep the batteries in a location out of reach of
children. Batteries can be dangerous if a child were to
put in his or her mouth.
If the batteries grow old, the effective operation range
of the remote control decreases considerably. If this
happens, replace the batteries with two new ones as
soon as possible.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as
alkaline and manganese batteries) together. Read the
packaging carefully as these different types of
batteries may have the same shape and color.
Exhausted batteries may leak. If the batteries have
leaked, dispose of them immediately. Avoid touching
the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
If you plan not to use the unit for a long period of
time, remove the batteries from the unit. Otherwise,
the batteries will wear out, possibly resulting in a
leakage of battery liquid that may damage the unit.
Do not throw away batteries with general house
waste. Dispose of them correctly in accordance with
your local regulations.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off by . In this state, this unit is designed
to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
There is a chance that placing this unit too close to a CRT-
based (Braun tube) TV set might impair picture color.
Should this happen, move this unit away from the TV set.
1 En
English Français Deutsch Svenska Italiano Español Nederlands Русский
NAMES OF PARTS AND THEIR FUNCTIONS.........................2
ADJUSTING THE CLOCK.........................................................5
INSTALLING “DTA CONTROLLER” ........................................6
LISTENING TO CD AND USB DEVICES..................................7
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE.....10
LISTENING TO DAB STATIONS (ISX-803D) .........................13
LISTENING TO FM STATIONS...............................................15
LISTENING TO EXTERNAL SOURCES .................................16
USING THE ALARM FUNCTION ............................................17
USING THE SLEEP TIMER .....................................................21
TONE CONTROL (REMOTE CONTROL ONLY) ....................21
ADJUSTING BRIGHTNESS OF FRONT PANEL DISPLAY ...21
TROUBLESHOOTING.............................................................22
NOTES ON DISCS AND USB DEVICES.................................25
SPECIFICATIONS ...................................................................26
Play back music on external devices such as audio/data CDs and USB devices (USB flash drives), and tune in to the DAB (ISX-803D
only)/FM radio.
•By the Bluetooth technology, you can enjoy clear sound without wired connections. One touch pairing enabled by NFC technology.
Use your favorite music or set of beeps as an alarm. The music you select is played at a volume of your own choice at the set alarm time,
giving you the best possible start to the day (IntelliAlarm function) ( P. 17).
Store/call up to five of your favorite DAB (ISX-803D only)/FM stations easily.
The 3-band equalizer (bass, middle, treble) can be set so that music sounds exactly how you want it.
Two types of clocks (with hour hands) that match the design of the unit can be shown.
About this manual
The illustrations of the main unit used in this manual are of the ISX-803D, unless otherwise specified.
The DAB/DAB+ tuning feature is only available on the ISX-803D.
If both the unit and remote control buttons can be used to operate a feature, the manual will describe steps using the buttons on the unit.
indicates precautions for use of the unit and its feature limitations.
indicates supplementary explanations for better use.
Insert the batteries into the remote control in the correct direction
(+ and –).
Point the remote control at the remote control signal receiver (on
the front panel) and use within the range shown below.
CONTENTS
Features
Supplied accessories
How to use the remote control
Note
y
Power cable Remote control
USB cap
DAB/FM antenna
(for ISX-803D)
Bracket
Pole
Base
Support
Cable clamp
Screw set
Note
Use these items to assemble the
stand. Read the separate
Assembly Guide for information
on how to assemble the stand.
Note
Keep the USB cap out of
reach of children so as to
ensure that it is not
mistakenly swallowed.
Batteries x 2
(AA, R6, UM-3)
Owner’s Manual
(this manual)
Assembly Guide
FM antenna
(for ISX-803)
6 m (20')
2 En
a (Power)
Press to turn on the system or enter standby mode. Time is
displayed on the front panel even when the system is in standby
mode.
y
Press and hold on the top of the unit for more than 3 seconds to set
the system to Eco Standby mode. No information on the front panel is
displayed in this mode. This can reduce power consumption. To cancel
Eco Standby mode, press again.
Even in standby mode or Eco Standby mode, the alarm function is
available.
b NFC mark
Allows easy pairing with NFC technology.
c USB port
Connect a USB device ( P. 9).
d VOLUME/+
Adjust the volume.
e SOURCE
Switch the source to be played.
f ALARM
Turns the alarm on/off, and allows various alarm settings to be
adjusted ( P. 18, 19).
g SNOOZE/SLEEP
Set the sleep timer or switch the alarm to snooze mode
( P. 19, 21).
h PRESET
Store/call up radio stations, or switch the playback folder
(when playing music on data CDs or USB devices).
i /
Skip the playback track/file, or tune the radio.
Holding the button down while playing a track/file will search
backward/forward the track/file.
j /
Play/pause the track being played.
k
Eject the CD ( P. 7, 8).
l Disc slot
Insert a CD ( P. 7, 8).
m DAB information display (ISX-803D only)
Display DAB information ( P. 13).
n DISPLAY (ISX-803D only)
Switch the DAB information display ( P. 14).
NAMES OF PARTS AND THEIR FUNCTIONS
Top panel
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
DISPLAY
nm13245678 jlk9
Auto Standby
With the Auto Standby function, the unit behaves as described below when the system is turned on (default setting):
This unit enters standby mode when playback of CD/USB is paused, when no signal is input from the tuner or a connected device, or when playback
continues at quite a low volume for a certain period of time (about 20 minuets).
This unit enters standby mode when no operation is performed for more than 8 hours.
Activating/Deactivating Auto Standby
1 1 Plug in the unit while pressing and holding .
2
2 Keep holding .
Auto Standby status changes, blinking the following indicators:
When activating Auto Standby: and the , ALARM, and PRESET buttons on the top panel blink for 3 seconds.
When deactivating Auto Standby: Only on the front display blinks for 3 seconds.
3 En
NAMES OF PARTS AND THEIR FUNCTIONS
English
1 Play/shuffle/repeat indicator
Displays the playback mode ( P. 7, 9).
b Remote control signal receiver
c Clock indicator
Shows the clock hour hand ( P. 5).
d Source indicator
Shows selected source. (The DAB indicator is only displayed
on the ISX-803D.)
e Bluetooth indicator
Turns on if this unit is connecting via Bluetooth ( P. 10, 12).
f Sleep indicator
Turns on if the sleep timer has been set ( P. 21).
g Alarm indicator
Turns on if the alarm has been set ( P. 17).
The Weekly Alarm indicator ( ) also turns on if Weekly
Alarm has been set.
h Multi-function indicator
Displays various information, including the clock time, track
number being played or FM station.
i Illumination sensor
Detects ambient lighting. Do not cover this sensor.
a ALARM TYPE
Switches the alarm type ( P. 18).
b CLOCK
Switches the type of clock display or allows the time to be set
( P. 5).
c DIMMER
Adjusts the brightness of the front panel display ( P. 21).
d AUX
Connects an external device.
e DAB/FM antenna terminal (ISX-803D)/
FM antenna terminal (ISX-803)
Connects the supplied DAB/FM antenna or an outdoor antenna.
Notes
The antenna should be stretched out. If radio reception is poor, change
the height, direction, or placement of the antenna.
If you use a commercially available outdoor antenna instead of the
supplied DAB/FM antenna, reception may be better.
f Terminal cover
Remove the terminal cover before connecting external devices
to AUX, and/or connecting the DAB/FM antenna to antenna
terminal.
Front panel display
2
56
3
4
8
7
1
9
Rear panel
AUX
75 Ω
DAB
/
FM ANT
AUX
75 Ω
FM ANT
1
6
2 3
5
4
4
5
ISX-803ISX-803D
AUX
75
Ω
DAB
/
FM ANT
A
UX
75
Ω
DAB
/
FM ANT
Supplied
DAB/FM
antenna
ISX-803D
If you pass the outdoor antenna cable and/or external device cable through the pole of the stand, read the separate Assembly Guide.
NAMES OF PARTS AND THEIR FUNCTIONS
4 En
a Remote control signal transmitter
b (Power)
Press to turn on the system or enter standby mode.
c ALARM
Switches the alarm on/off.
d SNOOZE/SLEEP
Set the sleep timer or switch the alarm to snooze mode
( P. 19, 21).
e Source button
Switch the source to be played.
f (Repeat)/ (Shuffle)
Play music on an audio/data CD or USB device in repeat/
shuffle ( P. 7, 9).
g /
Switch the playback folder when playing music on data CDs or
USB devices.
h
Play/pause.
Apply the setting.
i /
Skip the playback track/file.
Holding the button down while playing a track/file will search
backward/forward the track/file.
j
Stop playback.
k +10
Skip 10 tracks/files.
l VOLUME +/
Adjust the volume.
m MUTE
Mute/resume the sound.
n EQ LOW/MID/HIGH
Adjust the bass, middle or treble sound quality ( P. 21).
o PRESET /
Select a preset radio station.
p MEMORY
Store the radio station ( P. 15 ).
q TUNING /
Tune the radio.
Remote control
Bluetooth
1
q
p
o
4
6
j
5
3
2
7
9
n
l
k
m
8
5 En
English
1 Move the CLOCK switch on the rear panel to SET.
2 Set the time with / .
3 Move the CLOCK switch on the rear panel to
CLOCK1 or CLOCK2 to end the time setting.
y
Pressing SNOOZE/SLEEP in step 2 will switch between the 12 and
24 hour clock display.
The “PM” indicator will be shown only when you select the 12 hour clock
display.
Note
The time settings will be reset if the unit is not powered for more than one
week.
Move the CLOCK switch on the rear panel to switch the clock type.
Clock display mode 1 (CLOCK 1)
Clock display mode 2 (CLOCK 2)
ADJUSTING THE CLOCK
Setting the time
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
2
Top panel
SET
Rear panel
Set time (flashing)
Switching the clock type
CLOCK 2
CLOCK 1
Rear panel
Eg: 10:50
Analog clock
hour hand
(hour)
Minute
Eg: 10:50
Minute
Hour
6 En
Installing DTA CONTROLLER application on a mobile device, such as a smartphone or tablet computer, allows you to use a variety of
additional convenient features of this unit.
Features
Turning on the unit or setting the unit to standby mode
Adjusting volume
Setting of the alarm function (IntelliAlarm) ( P. 20)
Playing back songs stored in an iPhone
Note
If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.
INSTALLING “DTA CONTROLLER”
The mobile device needs to be connected with the unit via Bluetooth connection ( P. 10).
Google Play
TM
http://itunes.com/app/dtacontroller
https://play.google.com/store/apps/
details?id=com.yamaha.av.
dtacontroller
7 En
English
1 Press SOURCE to set CD as the playback source.
If a CD is already inserted, playback will start.
2 Insert the audio CD into the disc slot with the label
side facing toward the front of the unit.
Playback starts automatically. The track number is shown for a
while when starting playback or skipping tracks.
Use the following buttons to control the unit while playing
back tracks on audio CDs.
Note
CDs cannot be inserted or ejected when the system is in Eco Standby
mode ( P. 2).
LISTENING TO CD AND USB DEVICES
The unit will operate as follows when playing back tracks/files on CD/USB devices.
If the CD/USB device being played back is stopped, the track that was being played back will start playing from the beginning of the
track the next time playback begins.
If you press on the remote control while playback is stopped, the next time playback begins, the unit will play tracks as follows:
For audio CD: from the first track of the CD.
For data CD/USB device: from the first track of the folder that contains the track that was played last.
This system enters standby mode automatically if 20 minutes have elapsed without any playback and no operation is performed after
CD/USB device playback is stopped.
y
For details on playable discs and files, refer to “NOTES ON DISCS AND USB DEVICES” ( P. 25 ).
Listening to an audio CD
Using the remote control
Press CD.
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
12
Top panel
Label side
CD
Track number
Button Function
Top
Panel
/
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
Eject the CD
Remote
control
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
Stop
Repeat playback ( P. 9 )
Shuffle playback ( P. 9 )
+10 Skip 10 tracks/files
LISTENING TO CD AND USB DEVICES
8 En
1 Press SOURCE to set CD as the playback source.
If a CD is already inserted, playback will start.
2 Insert the data CD into the disc slot with the label
side facing toward the front of the unit.
Playback starts automatically. The folder/file number is shown
for a while when starting playback or skipping tracks.
Use the following buttons to control the unit while playing
back tracks on data CDs.
Listening to a data CD
Using the remote control
Press CD.
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
12
Top panel
Label side
Folder number
File number
Button Function
Top
Panel
/
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
PRESET Change the playback folder
Eject the CD
Remote
control
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
Stop
/ Change the playback folder
Repeat playback ( P. 9 )
Shuffle playback ( P. 9 )
+10
Skip 10 tracks/files within the
same folder
9 En
LISTENING TO CD AND USB DEVICES
English
1 Press SOURCE and set USB as the playback
source.
If a USB device is already connected, playback will start.
2 Connect a USB device to the USB port.
Playback starts automatically. The folder/file number is shown
for a while
when starting playback or skipping tracks.
Use the following buttons to control the unit while playing
back tracks on USB devices.
y
Stop playback before removing the USB device.
The playback mode can be checked with the play/shuffle/repeat indicator on the front panel display.
y
If the selected source contains folders, each folder will be played in repeat/
shuffle mode.
Repeat playback
Press (Repeat) on the remote control to select a playback
mode from the following.
: 1 track
:
All tracks within the folder (data CD/USB device only)
:All tracks
No display: Repeat mode off
Shuffle playback
Press (Shuffle) on the remote control to select a playback
mode from the following.
:
All tracks within the folder (data CD/USB device only)
:All tracks
No display: Shuffle mode off
Listening to a USB device
Using the remote control
Press USB.
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
21
Top panel
Folder number
File number
Button Function
Top
Panel
/
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
PRESET Change the playback folder
Remote
control
Play/Pause
/
Skip
Search backward/forward
(press and hold down)
Stop
/ Change the playback folder
Repeat playback ( P. 9 )
Shuffle playback ( P. 9 )
+10
Skip 10 tracks/files within the
same folder
Repeat/shuffle playback
Repeat
Shuffle
Remote control
10 En
This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (smartphone, digital audio
player, etc.). Please also refer to the owner’s manual of your Bluetooth device.
Pairing is an operation that registers the communicating device (hereafter called “the connecting device”) with this unit. You’ll need to
perform the pairing operation the first time you use your Bluetooth device with this unit, or if the pairing settings have been deleted. Once
pairing has been completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing is not
successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” ( P. 23).
y
This unit can be paired with up to eight connecting devices. When pairing with the ninth device has succeeded, pairing data for the device with the oldest
connection date will be deleted.
If this unit is connected via Bluetooth to another device, hold down the SOURCE button on this unit or Bluetooth on the remote control to disconnect the
Bluetooth connection before you perform the pairing operation.
If using an iPod touch/iPhone/iPad
1 Press the SOURCE button to switch the playback
source to Bluetooth.
2 On your iPod touch/iPhone/iPad, turn [Settings]
[Bluetooth] on.
The Bluetooth connection list will appear in [Devices].
(This procedure or display may differ depending on the type of
your iPod touch/iPhone/iPad.)
3 From the Bluetooth connection list of the connecting
device, choose this unit (ISX-803 Yamaha/ISX-803D
Yamaha).
When pairing has been completed, your iPod touch/iPhone/
iPad will indicate “Connected”.
The Bluetooth indicator on the front panel display of this unit
will light.
If using other than an iPod touch/iPhone/iPad
1 Press the SOURCE button to switch the playback
source to Bluetooth.
2 Perform Bluetooth pairing on the connecting device.
For details refer to the owners manual of the connecting
device.
3 From the Bluetooth connection list of the connecting
device, choose this unit (ISX-803 Yamaha/ISX-803D
Yamaha).
When pairing has been completed, the B luetooth indicator on
the front panel display of this unit will light for about 1
second.
y
If you are asked to enter a password, enter the numerals “0000”.
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
Pairing this unit with your Bluetooth device
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1
Top panel
Bluetooth indicator
Using the remote control
Press Bluetooth.
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1
Top panel
Bluetooth indicator
Using the remote control
Press Bluetooth.
11 En
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
English
Easy pairing
For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing operation just by holding the
smartphone over the NFC mark (you need to turn the system on and turn on the NFC function of the smartphone beforehand).
1 Press the SOURCE button to switch the playback
source to Bluetooth.
2 Connect this unit and your connecting device via
Bluetooth.
3
Play back music from your
Bluetooth
device.
Note
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the connecting device.
y
If you connect via Bluetooth from your connecting device and play
back music while the system is in standby mode, the system will
automatically turn on.
If you disconnect the Bluetooth connection from your connecting
device while the playback source is set to Bluetooth, the system will
automatically enter standby mode.
If Bluetooth is selected as the playback source, the system will
automatically enter standby mode when 20 minutes have elapsed
without any Bluetooth connection nor any operation performed.
1 Press to turn the system on.
2 Hold the smartphone over the NFC mark.
3 Perform the pairing operation at the smartphone
(for details, please read the owner’s manual of the
smartphone).
This unit is indicated as “ISX-803 Yamaha”/“ISX-803D
Yamaha” on the smartphone.
y
If you are prompted for a passkey, enter the numerals “0000”.
If the connection fails, move the smartphone slowly on the NFC
mark.
If the smartphone is equipped with a case, remove the case.
NFC
mark
Listening to a Bluetooth device
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1
Top panel
Using the remote control
Press Bluetooth.
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
12 En
Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
1 Press the SOURCE button to switch the playback
source to Bluetooth.
The Bluetooth indicator will blink on the front panel display;
this unit will search for the connecting device that was most
recently connected via Bluet ooth, and will then establish a
connection (You must first turn on the Bluetooth setting of the
connecting device).
When the Bluetooth connection has been established, the
Bluetooth indicator will light.
Note
Yamaha does not guarantee all connections between this unit and
Bluetooth device.
Connecting from the connecting device
1 In the Bluetooth settings of the connecting device, turn Bluetooth on.
2 From the Bluetooth connection list of the connecting device, choose this unit (ISX-803 Yamaha/ISX-803D
Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this unit will light.
Connecting with the NFC function
When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a Bluetooth connection.
Note
Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby mode. Turn the system on.
If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth connection will be disconnected.
Hold down the SOURCE button on this unit or Bluetooth on the remote control.
Set the system to standby mode.
Turn off the Bluetooth setting of the connecting device.
Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.
Connecting an already-paired device via Bluetooth
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1
Top panel
Bluetooth indicator
Using the remote control
Press Bluetooth.
Disconnecting a Bluetooth connection
13 En
English
DAB (Digital Audio Broadcasting) and DAB+ use digital signals for clearer sound and more stable reception compared to analog signals.
DAB+ is based on the original DAB standard but uses a more efficient audio codec.
DAB and DAB+ are broadcast in blocks of data called “ensembles” containing up to several radio stations that are simultaneously broadcast.
DAB and DAB+ can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the DAB information display.
“DAB” described in this manual may also refer to “DAB+”.
Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial scan is performed
automatically.
1
Press
SOURCE
and set DAB as the playback source.
The initial scan starts. During the scan, the degree of progress
is displayed on the DAB information display.
Scan is completed.
“Completed” and the number of receivable DAB stations
appear on the DAB information display.
Note
To perform the initial scan manually, press and hold PRESET for
more than 4 seconds and then press PRESET when the scan starting
screen is displayed.
If the initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
1
Press
SOURCE
and set DAB as the playback source.
2 Press / to tune the DAB station.
While receiving DAB, switch on the DAB information display.
When the unit does not receive a DAB signal, “Off Air” is
displayed instead of the DAB station name.
LISTENING TO DAB STATIONS (ISX-803D)
Preparing for DAB reception
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1 1
Top panel
Using the remote control
Press RADIO to switch between DAB/FM.
Tuning DAB stations
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
12
Top panel
Using the remote control
Press TUNING /
1
2
4
3
a Signal strength indicator:
Shows current signal strength.
b Secondary indicator:
Some stations have sub (secondary) stations. If a
secondary station is playing, the secondary indicator is
displayed.
c DAB station name
d DAB station Information ( P. 14)
LISTENING TO DAB STATIONS (ISX-803D)
14 En
1 Select DAB information by pressing DISPLAY
repeatedly.
Information is displayed in the order shown below.
Use the preset function to store your favorite 5 stations.
1 Press / to tune into your favorite DAB station.
2 Press and hold down PRESET.
3 Press PRESET and select the preset number to
store the DAB station.
4 Press and hold down PRESET to store the preset
station.
This stores the DAB station.
1 Press SOURCE and set DAB as the playback
source.
2 Press PRESET repeatedly to select the preset DAB
station.
Switching DAB station information
SET BEEP
SOURCE
+
BEEP
SOURCE
CLOCK
ALARM TYPE
2
1
LABEL SIDE
PRESET
DISPLAY
N
OOZE
SLEEP
1
Top panel
Text information
¨ Ensemble name
( is displayed before the ensemble name.)
¨ Status 1 (channel label and frequency)
¨ Status 2 (DAB or DAB+ and signal quality)
¨ Back to the top.
Storing DAB stations (preset)
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
234 1
Top panel
Using the remote control
Press and hold down MEMORY.
Using the remote control
Press PRESET /.
Using the remote control
Press MEMORY.
DAB
Preset
number
Selecting preset DAB stations
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1 2
Top panel
Using the remote control
Press PRESET /.
15 En
English
Note
If you tune to an FM station manually, the sound will be in monaural.
1 Press SOURCE and set FM as the playback source.
2 Press / to tune the FM station.
Use the preset function to store your favorite 5 stations.
1 Press / to tune into your favorite FM station.
2 Press and hold down PRESET.
3 Press PRESET and select the preset number to
store the FM station.
4 Press and hold down PRESET to store the preset
station.
This stores the FM station.
LISTENING TO FM STATIONS
Selecting the FM station
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
12
Top panel
Using the remote control
Press RADIO.
Tuning type Operation
Top
panel
Automatic
tuning
Press and hold down
or .
Manual
tuning
Press or repeatedly.
Remote
control
Automatic
tuning
Press and hold down
TUNING or .
Manual
tuning
Press TUNING or
repeatedly.
FM
Reception
frequency
Storing FM stations (preset)
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
234 1
Top panel
Using the remote control
Press and hold down MEMORY.
Using the remote control
Press PRESET /.
Using the remote control
Press MEMORY.
FM
Preset
number
LISTENING TO EXTERNAL SOURCES
16 En
1 Press SOURCE and set FM as the playback source.
2 Press PRESET repeatedly to select the preset FM
station.
Set the system to standby mode before connecting audio cables.
Remove the terminal cover before connecting external devices.
1 Connect external audio device to AUX on the rear
panel using a commercially available 3.5 mm (1/8 in)
stereo mini plug cable.
Note
Turn down the volume of the unit and your external audio device before
connection.
2 Press to turn the system on.
3 Press SOURCE and set AUX as the playback
source.
4 Start playback on the connected external audio
device.
Selecting a preset FM station
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
1 2
Top panel
Using the remote control
Press PRESET /.
LISTENING TO EXTERNAL SOURCES
AUTO SET
DIMMER
C
L
2
1
VOLUME
USB LA
B
SOURCE ALARM SNOO
Z
2
3
Top panel
Using the remote control
Press AUX.
AUX
75 Ω
FM ANT
AUX
75 Ω
DAB
/
FM ANT
AUX
ISX-803D
ISX-803
17 En
English
The unit includes an alarm function (IntelliAlarm) that plays back music sources or set of beeps (built-in alarm) at the set time in a variety of
different methods. The alarm function has following features.
3 types of alarms
Select from 3 alarm types, combining music and beep sounds.
Various music sources
Audio CD, data CD, USB device and radio can be selected. The following can also be selected depending on the audio source:
Snooze
The snooze function can be enabled to replay the alarm after 5 minutes.
USING THE ALARM FUNCTION
SOURCE + BEEP
The selected audio source and beep sound are played at the set time. This mode is recommended for
the best possible start to the day.
3 minutes before the set time: the source music begins to fade in and the volume gradually increases
as the alarm time approaches.
Alarm time: a beeping sound also begins playing.
SOURCE
The selected audio source is played at the set time. The volume fades in gradually and increases to
the set volume.
BEEP Only beep sound is played back at the set time.
Source Playback method Function
Audio CD
Selected track The selected track is played repeatedly.
Resume The track you listened to last time is played back.
Data CD/USB
Folder The selected folder is played repeatedly.
Resume The track you listened to last time is played back.
Radio
Preset station The selected preset radio station is played.
Resume The radio station you listened to last time is played back.
USING THE ALARM FUNCTION
18 En
Note
The alarm setting will be erased if the system enters standby mode without
properly completing it.
1 Press and hold ALARM.
The alarm indicator ( ) and set alarm time will flash
.
2 Press / to set the alarm time.
3 Select the alarm type with the ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 17.
4 (when alarm types other than BEEP are selected)
Press SOURCE to select music source.
Sources other than AUX and Bluetooth can be selected.
Notes
If CD/USB has been selected, connect/insert the audio source (audio/
data CD, USB device) to the unit.
If source cannot be played back at the time set for the alarm (eg. CD
is not inserted), the beep sound is played back.
5 (when alarm types other than BEEP are selected)
Specify the track, folder or radio station to be
played.
Press PRESET to select the track (audio CD), folder (data
CD/USB device) or radio station to be played.
y
When “0” is set, the playback resumes from the track/radio station you
listened to last time (resume).
6 Set the alarm volume by pressing VOLUME –/+
.
7 Press ALARM to complete setting the alarm.
The alarm will be set, and the alarm indicator ( ) will
light up.
Set the alarm time and alarm type
Using the remote control
Press / .
AUTO SET BEEP
SOURCE
+
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB LABEL SIDE
SOURCE PRESETALARM SNOOZE
SLEEP
17
2465
Top panel
Alarm indicator
Alarm time
BEEP
SOURCE+
BEEP
SOURCE
Rear panel
Using the remote control
Press the USB, CD, or RADIO button to select the
music source.
Using the remote control
Press PRESET /.
Alarm volume
1 / 1

Yamaha ISX-803 El kitabı

Kategori
Alıcı
Tip
El kitabı
Bu kılavuz için de uygundur