Iqua BHS-801 Kullanım kılavuzu

Bluetooth

®

Stereo headset

BHS -801

User Guide

BHS-801_Headset_UG_en_2.fm Page -1 Monday, September 25, 2006 2:20 PM

Contents

English ................................................................................................................ 1

Español ............................................................................................................. 15

Deutsch ............................................................................................................. 29

Français ............................................................................................................ 43

Italiano .............................................................................................................. 57

Nederlands ....................................................................................................... 71

Русский ............................................................................................................. 85

Türkçe ............................................................................................................... 99

Ελληνικα ......................................................................................................... 113

BHS-801_Headset_UG_en_2.fm Page 0 Monday, September 25, 2006 2:20 PM

1

EN

General Information

Thank you for purchasing Iqua Bluetooth

®

Wireless Headset BHS-801. Your new device is a

stylish product that enables you to communicate handsfree and comfortably with compatible

mobile phones that support Bluetooth wireless technology.

Overview of the product

1 Power on/off button

2 Indicator light

3 Volume up (+) button

4 Volume down (-) button

5 Call button

6 Earhook

7 Charger connector

1

2

3

4

5

6

7

BHS-801_Headset_UG_en_2.fm Page 1 Monday, September 25, 2006 2:20 PM

2

Sales package contents

1. Headset

2. 2 earhooks (one attached to the headset)

3. Stereo earpiece set

4. Earpiece adapter

5. Wall charger

with mini USB

connector

6. User Guide

7. Quick Guide

8. Carrying case

1

2

3

4

5

6

7

8

BHS-801_Headset_UG_en_2.fm Page 2 Monday, September 25, 2006 2:20 PM

3

EN

Getting Started

Wearing the headset

This headset is designed to comfortably fit your ear when

attached to one of the optional earhooks provided in the

sales package. See pictures on page 2 for reference.

1. To attach the earhook, insert the main body of the

headset into the earhook ring and push until it stops.

2. Place the headset in your ear with the microphone

angled at your mouth. Check that the size of the

earhook fits your ear and try another earhook if

necessary.

3. To remove the earhook, gently pull it away from the

headset.

Charging the battery

Before you use the headset, you must charge its battery for approximately 2 hours. Once the

battery is full, it will provide up to 10 hours of talk time and up to 150 hours of standby time.

1. Connect the charger cable to the connector in the headset.

2. Connect the charger into an electric outlet. A red light will turn on.

3. When the battery is fully charged, the red light will turn off.

BHS-801_Headset_UG_en_2.fm Page 3 Monday, September 25, 2006 2:20 PM

4

Switching on and off

To switch the headset on, press and hold down the button until you hear a beep and a

green light flashes several times.

To switch the headset off, press and hold down the button until you hear a beep and a

red light flashes several times.

Pairing the headset and your mobile phone

Using the headset for the first time

When the headset is powered on for the very first time, it will automatically enter pairing mode.

This is indicated by red and green lights flashing alternately. Follow the steps 2 to 4 below to

pair your mobile phone with the headset.

Using the headset later on

When the headset is powered on, it will automatically reconnect to the phone it was last

connected with. If the connection fails because the phone is not found, the headset will appear

not connected with green light flashing and you should finish pairing manually:

1. After the power has been switched on, press and hold down the Call button until the red

and green lights start flashing alternately.

2. Complete the pairing with your phone. Please refer to the manual of your phone for

details on how to search and pair. When the phone has found the headset, the phone will

show Iqua BHS-801 on its display.

BHS-801_Headset_UG_en_2.fm Page 4 Monday, September 25, 2006 2:20 PM

5

EN

3. To pair with the phone, enter the PIN code for the headset, which is 0000. After pairing,

the headset may try to connect with your phone automatically or you may have to

activate the connection manually from the phone menu.

4. Once pairing has been successfully completed, you will hear a low to high tone and a

green light will start flashing at a long interval. The headset is now ready for you to make

and receive calls. If the pairing has not been completed, you will hear a high to low tone

and the green light will start flashing at a short interval.

To cancel pairing after entering pairing mode, press and hold down the Call button until the

green and red light are no longer flashing.

To reset and clear the headset’s pairing list, switch the headset off and press and hold down

the and buttons for five seconds. You will hear a beep and the red light flashes twice.

For the latest compatibility information, please visit www.iqua.com.

BHS-801_Headset_UG_en_2.fm Page 5 Monday, September 25, 2006 2:20 PM

6

Call Functions

Answering a call

When your mobile phone rings, answer the call by briefly pressing the Call button on the

headset. A green light will start flashing to indicate an active call. You can also turn on the

automatic answering function of your mobile phone to make the headset answer calls

automatically.

Ending a call

To end an active call, press and hold down the Call button.

Rejecting a call

When you are receiving an incoming call that you do not want to answer, press and hold down

the Call button until you hear a beep to reject the call.

Muting and unmuting a call

To mute a call, press and hold down the button for two seconds until you hear two beeps.

To unmute the call, briefly press any of the buttons.

BHS-801_Headset_UG_en_2.fm Page 6 Monday, September 25, 2006 2:20 PM

7

EN

Redialing the last dialed number

To place a call to the last dialed number in stand-by mode, press and hold down the Call button

until you hear a beep.

Voice dialing (when supported by the phone)

To activate the voice dialing feature of your mobile phone:

1. Press and hold down the Call button for two seconds until you hear two beeps.

2. Speak the voice tag of the person you wish to call.

Please refer to your phone’s manual for details as some phone models do not support voice

dialing.

Adjusting the volume

To increase the volume, press the button.

To decrease the volume, press the button.

Transferring call from the headset to your mobile phone

To transfer an ongoing call from the headset to your mobile phone, press and hold down

the button until you hear a beep.

BHS-801_Headset_UG_en_2.fm Page 7 Monday, September 25, 2006 2:20 PM

8

Using the stereo headset

See pictures on page 2 for reference with the following instructions 1 to 3.

1. Remove the earhook from the headset body.

2. Connect the earpiece adapter to the headset body.

3. Connect the stereo earpiece set to the adapter.

4. You can modify the length of the neck strap by sliding the wire stopper up and down. See

fig 1 below.

5. Wear the neck strap around your neck and place the earpieces in your ears.

See fig. 2 below.

Fig 1.

Fig 2.

Movable wire stopper

BHS-801_Headset_UG_en_2.fm Page 8 Monday, September 25, 2006 2:20 PM

9

EN

While listening using the earpiece set, you can do any of the following:

• Adjust the volume using and buttons.

• Mute streaming by pressing and holding down button.

• Unmute streaming by pressing the or button.

• Answer, end or reject a call normally, as the streaming automatically stops at an

incoming call and you will start hearing the call through the headset. The streaming will

continue automatically after the call depending on the model of your phone. Please refer

to the manual of your phone for details.

Light indication summary

The headset’s LED can be either red or green. The different signals indicate:

• Red light flashing - low battery.

• Red light on - battery is charging.

• Red light off - charging complete.

• Red light flashing several times - power off.

• Red light flashing twice, green once - call muted.

• Green and red flashing alternately - in pairing mode.

• Green light flashing at a low interval - connection active.

• Green light flashing at a high interval - not connected.

• Green light flashing several times - power on.

• Green light flashing twice, red once - phone is ringing.

• Green light flashing fragmentally thrice within two seconds - call active.

BHS-801_Headset_UG_en_2.fm Page 9 Monday, September 25, 2006 2:20 PM

10

Product Specifications

Model: BHS-801

Size: 62.5 mm (L) x 25 mm (W) x 13 mm (H)

(with earhook 79x49x17)

Weight: 12 g

(with earhook)

Talk time: Up to 10 hours

Music playing time: 8 hours

Standby time: Up to 150 hours

Charging time: Within 2 hours

Supported Bluetooth profiles: Handsfree 1.0, Headset 1.1, and A2DP 1.0

Bluetooth Compliance: Bluetooth 1.2

Connection: Point-to-point

Paired Devices: Up to 8, one at a time

Battery: Internal rechargeable battery

Operating Temperature: -15ºC to +50ºC

Operating range: Up to 10 meters

Sales Package Contents: Headset, 2 earhooks, stereo earpiece, earpiece

adapter, wall charger, carrying case, user guide, quick

guide

BHS-801_Headset_UG_en_2.fm Page 10 Monday, September 25, 2006 2:20 PM

11

EN

Power Management

This product is powered by a built-in rechargeable battery which cannot be changed. Do not

attempt to replace the battery. Rechargeable battery can be charged and discharged

hundreds of times, but it will eventually wear out. After a period of time that will vary depending

on the use and usage conditions, you may find that the built-in battery will power your product

for only a couple of hours, requiring you to charge more frequently.

Do charge your device only with the charger provided in the sales package. Unplug the

charger when not in use. Do not leave the device connected to the charger for a longer period

than needed, since overcharging may shorten the battery lifetime.

If left unused, a fully charged battery will discharge itself over time.

Temperature extremes may affect the ability of the battery to charge. Always try to keep the

device between 15°C and 25°C (59 F and 77 F). Leaving the device in hot or cold places, such

as in a closed car in summer or in winter conditions, will reduce the capacity and lifetime of

the battery. A device with a hot or cold battery may not work for a while even when the battery

is fully charged. Battery performance is particularly limited in temperatures well below

freezing. Do not charge the battery in a humid environment.

BHS-801_Headset_UG_en_2.fm Page 11 Monday, September 25, 2006 2:20 PM

12

Care and Maintenance

– Switch off the device before putting it into your pocket or bag. Otherwise the device may

answer or make a call without you knowing it.

– Do not expose the device to liquid, moisture or humidity as it is not waterproof.

– Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

– Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

– Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

– Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

– Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

– Use a soft, clean, dry cloth to clean any lenses.

– Do not expose your device to contact with sharp objects as this will cause scratches and

damage.

– Do not stick anything inside the device as this may damage internal components.

– Do not dismantle the device or the charger as they do not contain serviceable parts and

taking apart the device may expose you to dangerous voltages or other hazards.

Act according to your local rules and do not dispose of this product as part of your

normal household waste. Dispose of this product in a separate collection system

meant for recycling of electrical and electronic products.

BHS-801_Headset_UG_en_2.fm Page 12 Monday, September 25, 2006 2:20 PM

13

EN

How to get service for my IQUA Product?

If you believe that you are entitled to a repair or replacement of your IQUA Product based on

your statutory rights under the applicable national laws relating to the sale of consumer

products or warranty given by the retailer, who has sold the IQUA Product to you, please

contact your retailer.

DECLARATION OF CONFORMITY

We (Iqua Ltd.) declare, under our sole responsibility, that the product (BHS-801) conforms

with the provisions of the following Council Directive: 1999/5/EC.

0523 FCC ID: TUFBHS-801 6574A-BHS801

IC:

BHS-801_Headset_UG_en_2.fm Page 13 Monday, September 25, 2006 2:20 PM

BHS-801_Headset_UG_en.fm Page 13 Monday, June 19, 2006 4:13 PM

15

ES

Información general

Gracias por adquirir el Auricular inalámbrico Bluetooth

®

BHS-801 de Iqua. Este nuevo

dispositivo es un producto elegante que le permite una cómoda comunicación en modo

manos libres con los teléfonos móviles compatibles que admiten la tecnología inalámbrica

Bluetooth.

Descripción del producto

1 Botón de encendido/

apagado

2 Indicador luminoso

3 Botón de aumento (+) del

volumen

4 Botón de reducción (-) del

volumen

5 Botón de llamada

6 Gancho

7 Conector del cargador

1

2

3

4

5

6

7

BHS-801_Headset_UG_es.fm Page 15 Monday, September 25, 2006 1:48 PM

16

Contenido del paquete de ventas

1. Auricular

2. Dos ganchos (uno acoplado al auricular)

3. Auricular de tapón estéreo

4. Adaptador para

auricular de tapón

5. Cargador de pared

con miniconector

USB

6. Guía del usuario

7. Guía rápida

8. Funda protectora

1

2

3

4

5

6

7

8

BHS-801_Headset_UG_es.fm Page 16 Monday, September 25, 2006 1:48 PM

17

ES

Inicio

Colocar el auricular

El diseño de este auricular está pensado para adaptarse

cómodamente a su oreja cuando se utiliza uno de los

ganchos que incluye el paquete de ventas. Para su

consulta, vea las imágenes de la página 16.

1. Para acoplar el gancho, inserte la unidad principal

del auricular en el anillo del gancho y presione hasta

que encaje en su sitio.

2. Colóquese el auricular en la oreja y oriente el

micrófono hacia su boca. Compruebe que el tamaño

del gancho es el apropiado para su oreja; de lo

contrario, pruebe con otro gancho.

3. Para quitarlo, tire de él con cuidado hasta separarlo

del auricular.

Cargar la batería

Antes de utilizar el auricular, es preciso cargar la batería durante unas 2 horas. Una vez

cargada por completo, proporcionará una autonomía de hasta 10 horas de conversación y

150 horas en modo de espera.

1. Conecte el cable del cargador al conector del auricular.

2. Conecte el cargador a una toma de corriente. Se encenderá una luz roja.

3. Cuando la batería esté cargada por completo, la luz roja se apagará.

BHS-801_Headset_UG_es.fm Page 17 Monday, September 25, 2006 1:48 PM

18

Encender y apagar

Para encender el auricular, mantenga pulsado el botón hasta que oiga un pitido y una

luz verde parpadee varias veces.

Para apagarlo, mantenga pulsado el botón hasta que oiga un pitido y una luz roja

parpadee varias veces.

Vincular el auricular al teléfono móvil

Uso del auricular por vez primera

La primera vez que se usa el auricular, el dispositivo accede automáticamente al modo de

vinculación. Esto se indica mediante el parpadeo de la luz verde y la luz roja de forma

alternativa. Siga los pasos 2 a 4 que se indican a continuación para vincular su teléfono móvil

al auricular.

Uso del auricular más adelante

Cuando se enciende el auricular, el dispositivo se vuelve a conectar automáticamente al

último teléfono con el que ha estado conectado. Si no se logra establecer la conexión porque

no se encuentra dicho teléfono, el auricular no se conectará, la luz verde empezará a

parpadear y deberá finalizar la vinculación manualmente:

1. Una vez encendido el dispositivo, mantenga pulsado el botón de llamada hasta que las

luces roja y verde empiecen a parpadear de forma alternativa.

2. Complete el proceso en su teléfono móvil. Consulte el manual de su teléfono para

obtener información sobre la búsqueda de dispositivos y el proceso de vinculación.

En cuanto el teléfono localice al auricular, la pantalla del teléfono mostrará el texto Iqua

BHS-801.

BHS-801_Headset_UG_es.fm Page 18 Monday, September 25, 2006 1:48 PM

Sayfa yükleniyor ...

Iqua BHS-801 Kullanım kılavuzu

Iqua BHS-801 Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler