Yamaha EAD10 Kullanım kılavuzu

Owner’s Manual

Electronic Acoustic

Drum Module

EN

Quick Guide

Features of the EAD10

page 6

page 10

S-1

EAD10 Owner’s Manual

For EAD10

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING: Do not place this product in a position where anyone

could walk on, trip over, or roll anything over power or connecting

cords of any kind. The use of an extension cord is not recommended!

If you must use an extension cord, the minimum wire size for a 25’

cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the

larger the current handling capacity. For longer extension cords, con-

sult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mount-

ing fixtures that are either supplied with the product or as optional

accessories. Some of these items are designed to be dealer assem-

bled or installed. Please make sure that benches are stable and any

optional fixtures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of

battery is approximately five years. When replacement becomes nec-

essary, contact a qualified service representative to perform the

replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery

being charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating

and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

SPECIAL MESSAGE SECTION

92-BP (bottom)

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Electronic Acoustic Drum Module

Model Name : EAD10

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC)

S-2

EAD10 Owner’s Manual

For AC adaptor and EAD10

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

S-3

EAD10 Owner’s Manual

For AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

(can_b_02)

CAN ICES-3 (B)/NMB-3(B)

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral trian-

gle is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manu-

facturer.

12 Use only with the cart, stand, tri-

pod, bracket, or table specified by

the manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during light-

ning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

S-4

EAD10 Owner’s Manual

(standby)

(weee_eu_en_02)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der

er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta.

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products, please contact your local municipality,

your waste disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

2

EAD10 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do

not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If some trouble

or malfunction occurs, immediately turn off the power switch of the instrument and

disconnect the AC adaptor from the outlet. When the AC adaptor is connected to

the AC outlet, keep in mind that electricity is flowing at the minimum level, even if

the power switch is turned off. When you are not using the instrument for a long

time, make sure to unplug the power cord from the wall AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting,

damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage is

printed on the name plate of the instrument.

• Use the specified adaptor (page 63) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument or

attempt to disassemble or modify the internal components in any way. If it should

appear to be malfunctioning, discontinue use immediately and have it inspected by

qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as water

seeps into the instrument, turn off the power immediately and unplug the power

cord from the AC outlet. Then have the instrument inspected by qualified Yamaha

service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For AC adaptor

For EAD10

Power supply/AC adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

3

EAD10 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other

property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in damage

to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally fall

over.

• Before moving the instrument, remove all connected cables, to prevent damage to

the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When you

are not using the product for a long time, make sure to unplug the power cord from

the wall AC outlet.

• Use the included module holder if you are installing the EAD10 on the hi-hat stand.

Also, make sure you use the wing bolts included with the module holder. Failure to

do so could cause damage to the internal components or result in the instrument

falling over.

• Be sure to securely tighten the clamp screw and module holder wing bolts when

setting up the EAD10. Also, do not loosen the clamp screw or module holder wing

bolts rapidly. Not doing so can cause parts to fall off the main unit, sensor unit, or

module holder resulting in injury.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and gradually

raise the volume controls while playing the instrument to set the desired listening

level.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a high

or uncomfortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Assembly

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

4

EAD10 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage

to data, or damage to other property, follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio, stereo equip-

ment, mobile phone, or other electric devices. Otherwise, the

instrument, TV, or radio may generate noise. When you use the

instrument along with an application on your iPad, iPhone or iPod

touch, we recommend that you set “Airplane Mode” to “ON” on that

device in order to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or

extreme cold or heat (such as in direct sunlight, near a heater, or in

a car during the day) to prevent the possibility of panel disfiguration,

damage to the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the instrument,

since this might discolor the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft and dry/slightly damp

cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids,

or chemical-impregnated wiping cloths.

 Saving data

• System settings (Reference Manual (Advanced)(PDF)) are stored

automatically and will not be lost when the power is turned off.

However, settings may be lost due to malfunction or improper oper-

ation. Save important data to an external device such as a USB

flash drive or a computer (pages 25 and 30). Please read page 30

before using a USB flash drive.

• Edits to Scenes, etc., are lost if not saved before the power is

turned off. Likewise, edits are lost when the auto power off function

turns the power off (page 29). Save data you want to keep to the

main unit, or to an external device such as a computer or USB flash

drive (pages 25 and 30). However, data stored in the main unit may

be lost due to malfunction or improper operation. Save important

data to an external device such as a USB flash drive or a computer

(pages 25 and 30). Please read page 30 before using a USB flash

drive.

• To protect against data loss through USB flash drive damage, we

recommend that you save your important data onto spare USB

flash drive or an external device such as a computer as backup

data.

Information

 About copyrights

• Copying of the commercially available musical data including but

not limited to MIDI data and/or audio data is strictly prohibited

except for your personal use.

• This product incorporates and bundles contents in which Yamaha

owns copyrights or with respect to which Yamaha has license to use

others’ copyrights. Due to copyright laws and other relevant laws,

you are NOT allowed to distribute media in which these contents

are saved or recorded and remain virtually the same or very similar

to those in the product.

* The contents described above include a computer program, Accompani-

ment Style data, MIDI data, WAV data, voice recording data, a score, score

data, etc.

* You are allowed to distribute medium in which your performance or music

production using these contents is recorded, and the permission of Yamaha

Corporation is not required in such cases.

 About this manual

• The illustrations and LCD screens as shown in this manual are for

instructional purposes only, and may appear somewhat different

from those on your instrument.

• Windows is a registered trademark of Microsoft® Corporation in the

United States and other countries.

• MacOS, iPhone and iPad are trademarks of Apple Inc., registered

in the U.S. and other countries.

• The company names and product names in this manual are the

trademarks or registered trademarks of their respective companies.

• The names of buttons, terminals, and the like from the EAD10’s

front, rear and top panels are enclosed in [ ] (square brackets).

 Latest Firmware Version

From time to time, Yamaha may update product firmware without

prior notice.

We recommend, therefore, that you check our web site (below) for

the latest version and keep your EAD10 firmware up to date.

http://download.yamaha.com/

The content of this Owner’s Manual applies to the newest version of

the firmware as of printing. Details regarding any functions added to

later versions will also be made available via the above web site.

 About the Pads

Within this Owner’s Manual, the optional external pads that may be

connected to the EAD10 are referred to by model name. Please note

that these model names were up-to-date as of printing of this man-

ual.

Details regarding any subsequently released models will be made

available via the following web site.

http://download.yamaha.com/

* Yamaha Corporation reserves the right to modify this URL at any

time without prior notice.

5

EAD10 Owner’s Manual

(bottom_en_01)

The model number, serial number, power requirements, etc., may be found on or near the

name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and retain this manual as a

permanent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

6

EAD10 Owner’s Manual

Quick Guide

Adjusting Volume and Sound Balance (page 13)

1.

Turn the [MASTER VOLUME] knob or [AUDIO/

CLICK VOLUME] knob.

Hit all drums and cymbals in the drum set to make sure

that the EAD10 is picking up the sound.

Changing Sounds (page 33)

1.

Turn the [SCENE] knob to select different

sounds (Scenes).

2.

Adjust the levels with the [REVERB],

[EFFECT], and [TRIGGER] knobs.

Practicing with the Metronome (Click) (page 39)

1.

Press the [ ] (Click) button.

2.

Press the button below “ ” to the start the

Metronome.

3.

Use the [+] or [–] buttons to adjust the tempo.

4.

Press the “ ” button again to stop the Metro-

nome.

1

Overall volume Volume control for the AUX

IN (auxiliary input) and Met-

ronome (click)—sounds

other than what you play

2

1

Adjusts the

Reverb depth

Adjusts the Trigger Sound

volume (with the default

setting, the Trigger sound is

added to the bass drum)

Adjusts the

Effect depth

132, 4

7

EAD10 Owner’s Manual

Quick Guide

Playing Along with a Favorite Song (page 24)

1.

Connect a portable music player to the [AUX

IN] jack.

2.

Start music playback on your portable

player.

3.

Play the drums while listening with head-

phones.

Recording Your Performance (page 41)

1.

Press the [RECORDER] button.

2.

Press the button below “” to start record-

ing.

3.

Play the drums.

4.

Press the button below “ ” to stop record-

ing.

2

1

3

12, 4

3

8

EAD10 Owner’s Manual

PRECAUTIONS 2

Quick Guide 6

Included Accessories 9

Features of the EAD10 10

How the EAD10 makes sound........................................... 11

About the Manuals 12

Printed Manual .................................................................. 12

Digital Manual (PDF) ......................................................... 12

Panel Controls and Functions 13

Main Unit ........................................................................... 13

Sensor Unit........................................................................ 15

About the Trigger Input Jacks............................................ 16

Setup Guide 17

Setting Up.......................................................................... 17

Connect with Other Devices and Expand the Fun............. 24

Turning On or Off............................................................... 25

Setting Up the Sensor Unit ................................................ 27

Changing the Overall Settings........................................... 29

Using a USB Flash Drive................................................... 30

Basic Guide 32

Performing with Various of Scenes ................................... 32

Creating Your Own Scene................................................. 35

Using the Click (Metronome) ............................................. 39

Recording Your Performance............................................ 41

Application Guide 48

Enhance Your Drum Set with Separately Sold Add-Ons... 48

Reference 55

Menu List........................................................................... 55

Troubleshooting................................................................. 58

Message List ..................................................................... 61

Specifications .................................................................... 63

Index.................................................................................. 64

Contents

9

EAD10 Owner’s Manual

Welcome

Thank you for purchasing this Yamaha product.

To get the most out of your EAD10, be sure to read this Owner’s Manual carefully.

And after reading through this manual, be sure to store it in a safe place

so that you can refer back to it again as needed.

Included Accessories

Owner’s Manual (this book)

AC adaptor

Module holder

Module holder wing bolts (× 2)

Connector cables (1 pair)

Cable bands (× 3)

Adhesive cushions (× 2)

10

EAD10 Owner’s Manual

Features of the EAD10

The EAD10 lets you easily change the sound of your acoustic drums into the sound of your liking.

Connect a smart phone to the EAD10 and enjoy playing the drums along with your favorite music.

Also, it can be used in a wide range of applications from practice, recording to live situations.

• Sensor Unit that mounts on the bass drum makes setup simple

• Built-in XY configured stereo mic provides high quality monitoring of the entire drum set with natu-

ral balance and stereo orientation

• Loud drums can be monitored with proper volume using headphones or earphones

• Change effect settings with a single knob and easily save and recall settings

• PCM tone generator makes it easy to change the sound of your bass drum by using a Triggered

sound — even in the middle of a performance

• Play a wide range of musical genres from contemporary to the by using the effects, your own sam-

ples or the internal Triggered sounds

• Recording and playback possible via USB flash drive or USB audio

• Left and right outputs allow you to easily connect to a PA

Main Unit Sensor Unit

Easy setup allows comfortable monitoring of your drum sound while playing

Transforms the sound of your drums into a sound of your liking

Use for recording or in-live situations

11

EAD10 Owner’s Manual

 How the EAD10 makes sound

The Sensor Unit sends two types of signals to the Main Unit; an audio signal captured with the mic

sensor, and a trigger signal captured with the trigger sensor.

The audio signal can be processed with Effects, while the trigger sensor can be used to play Trigger

Sounds depending on how you play your drums.

For more information on Trigger Sounds, Effects, and Reverb, please see “What is a Scene?” (page

32).

Mic sensor

Trigger sensor

Audio signal from

the drum set

Trigger signal from

the bass drum

(Mic sound &)

Effects

Trigger Sound

(internal Voices)

Reverb

Sensor Unit

Main Unit

12

EAD10 Owner’s Manual

About the Manuals

The following manuals are provided for using the EAD10. These manuals are intended for users

of the EAD10.

Owner’s Manual (this book)

Setup Guide

Explains how to attach and setup the EAD10 for producing sound.

Basic Guide

Describes the fundamentals needed to operate the EAD10.

Application Guide

Describes parameter settings and other more advanced uses.

Reference

Describes troubleshooting techniques and contains other reference materials.

Reference Manual (Advanced)

The Reference Manual provides a description of all of the functions that can be accessed by pressing the [MENU] but-

ton.

Data List

This provides lists of Scene and Effect names in the EAD10, and MIDI related information.

iPhone/iPad Connection Manual

Describes how to connect smart devices such as an iPhone and iPad.

Printed Manual

Digital Manual (PDF)

The digital format manuals listed above can be obtained from the Yamaha Downloads web page.

To do so, go to the web page using the following URL, enter “EAD10” in the “Model Name”

field, and then click “Search.”

Yamaha Downloads: http://download.yamaha.com/

13

EAD10 Owner’s Manual

Panel Controls and Functions

Main Unit

Top Panel

[AUDIO/CLICK VOLUME] knob

Adjusts the volume for AUX IN (aux-

iliary input) and Click functions—any

sound or audio you play along to.

Function Buttons 1–3

(page 33) ([F1], [F2], [F3])

Selects the functions that

appear at the bottom of each

screen.

Display (page 33)

Displays a variety of informa-

tion.

[SCENE] knob (page 33)

Switches between the dif-

ferent sound sets.

Or, returns to the Scene

screen from other screens.

NOTE

The knob can be used in the same manner as the

[–] and [+] buttons. For more information, refer to the

Reference Manual (Advanced) (PDF) (MENU/Utility/

General).

[ ] (Standby/On) switch (page 25)

Switches the power between standby (off) and

on.

[MENU] button

Accesses the advanced settings

screen. For more detailed informa-

tion, refer to the Reference Manual

(Advanced) (PDF).

[REVERB] knob (page 33)

Adjusts the reverb level.

[EFFECT] knob (page 33)

Adjusts the amount of Effect applied to the

audio signal from the mic sensor.

[TRIGGER] knob (page 33)

Adjusts the Trigger Sound volume.

[STORE] button (page 37)

Opens the Store screen. Stores Scenes

that you have created.

[–] button,

[+] button

Increases or

decreases the

value by one (1).

[ ] (Click) button (page 39)

Accesses the Click (Metronome)

screen. The button flashes in

sync with the Click tempo.

[RECORDER] button (page 41)

Accesses the Recorder (record/play-

back) screen. The button lights while

recording or during playback.

[EXIT] button

Cancels the action, or returns to the screen one level higher.

Press several times to return to the Scene screen.

NOTE

When in the Scene Screen, this button can also be used as a

Panic Button to stop any sounds.

[ ] (Sensor Unit) button

(page 27)

Accesses the Sensor Unit

screen. Set the mic sensor level

so that the button occasionally

flashes when hitting the drums

strongly.

[MASTER VOLUME] knob

Adjusts the overall volume.

14

EAD10 Owner’s Manual

Panel Controls and Functions

Rear Panel

[FOOT SW] Jack (page 48)

Connects a foot pedal or foot switch (sold sep-

arately).

FC5 HH65

etc.

FC7

TO SENSOR UNIT [A] jack

(page 17)

Connect to the [A] jack on the

Sensor Unit using the connec-

tor cable (included).

TO SENSOR UNIT [B] jack

Connect to the [B] jack on the

Sensor Unit.

For more information on the [qKICK/w]

to [y] jacks, see “About the Trigger Input

Jacks” (page 16).

Sensor Unit

Standard phone plug

(6.3 mm)

Stereo mini plug

(3.5 mm)

DC IN jack (page 17)

Use the AC adaptor that

came with the EAD10.

USB cable

[USB TO DEVICE] termi-

nal (page 30)

Connects a USB flash

drive.

Cannot be used with other

USB devices.

[USB TO HOST] terminal (page 25)

Connect a computer or smart device

such as an iPhone or iPad to send and

receive digital signals (audio and MIDI).

Additional parts are required for connect-

ing an iPhone or iPad. For more informa-

tion, refer to “iPhone/iPad Connection

Manual” (PDF).

Cord hook (page 17)

Wrap the AC adaptor cord

around this hook to prevent

accidental unplugging dur-

ing use.

Cord hook

AC adaptor cord

[AUX IN] (auxiliary

input) jack

(page 17)

Connect to the

headphone jack on

a smart phone or

portable music

player.

OUTPUT [R]/[L/MONO]

jacks (page 17)

Connect to powered speak-

ers or other such PA system.

These jacks are standard

phone type output jacks.

If mono output is required,

use only the [L/MONO] jack.

15

EAD10 Owner’s Manual

Panel Controls and Functions

Front Panel

Sensor Unit

NOTICE

Do not hit the Sensor Unit with the drumsticks. Doing so can damage the mic sensor resulting in inferior performance.

Standard stereo phone plug

(6.3 mm)

[PHONES] jack

Connects headphones. This output jack is a standard

stereo phone plug (6.3 mm). Use a 3.5 mm stereo

mini to (6.3 mm) stereo adaptor to connect head-

phones or earphones with a stereo mini plug (3.5 mm)

to the [PHONES] jack.

CAUTION

Do not use headphones for a long period of time at

high volume. Doing so can cause loss of hearing.

Mic Sensor

Captures the whole drum set’s

acoustic sound converting it into

an audio signal.

[A] jack

Connect to the TO SENSOR UNIT

[A] jack on the rear panel using

the connector cable (included).

Sends the trigger sensor signal.

[B] jack

Connect to the TO SENSOR UNIT

[B] jack on the rear panel using

the connector cable (included).

Sends the mic sensor signal.

Clamp screw (page 17)

Secures the Sensor Unit to

the bass drum hoop.

Trigger sensor

Converts vibrations produced

when the bass drum is hit

into a trigger signal.

16

EAD10 Owner’s Manual

Panel Controls and Functions

Trigger signals are received via the trigger input jacks. These are used for connecting separately sold accessories to the

EAD10. You can connect up to six pads or drum triggers.

[qKICK/w] through [y] jacks are located on the rear panel of the Main Unit.

Visit the web page below for more information on separately sold accessories that can be connected to each trigger input

jack.

For more information on connections of separately sold accessories, see “Enhance Your Drum Set with Separately Sold

Add-Ons” (page 48).

Yamaha Downloads: http://download.yamaha.com/

* Yamaha Corporation reserves the right to modify this URL at any time without prior notice.

About the Trigger Input Jacks

Standard stereo phone plug

(6.3 mm)

Trigger Input jacks

[qKICK/w]

The TO SENSOR UNIT [A] jack can

be as the [qKICK/w] jack (page 48).

This jack consists of a pair of mono

trigger inputs.

[eSNARE/r]

This jack consists of a pair of mono

trigger inputs. Connects drum triggers

such as the DT50S (sold separately)

(page 48).

DT50S

[t] and [y]

Connects DTX Series pads, etc.

(page 48).

Supports three-zone pads.

TP70S

XP80

PCY135

Using a commercially available Y-cable you

can connect two mono pads.

For example, you can connect a Sensor Unit

and a kick pad to the [qKICK/w] jack.

Stereo audio plug

Mono phone jack

 Y-cable

KU100

Sayfa yükleniyor...

Yamaha EAD10 Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Yamaha EAD10 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler