Kenwood FDM315SS El kitabı

Kategori
Gıda işlemcileri
Tip
El kitabı
TYPE FDM31
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
Instrukcja obsługi
instruções
English 2 - 13
Nederlands 14 - 26
Français 27 - 39
Deutsch 40 - 52
Italiano 53 - 65
Português 66 - 78
Español 79 - 91
Dansk 92 - 103
Svenska 104 - 115
Norsk 116 - 127
Suomi 128 - 139
Türkçe 140 - 151
Česky 152 - 164
Magyar 165 - 176
Polski 177 - 190
Eλληνικά 191 - 205
Slovenčina 206 - 218
Українська 219 - 232
ÝY
prr pqq
1
3
2
1
4
8
9
7
6
5
10
15
16
17
18
19
20
2
3
4
5
6
9
7
13
11
10
12
8
21
23
24
25
22
26
27
a
b
c
d
e
e
d
c
b
a
14A Plastic blender C - standard
attachments
D - optional
attachments
14B Glass blender
c
b
a
a
b
15/16 18-19-20
21
22
17
c
b
a
50mm
30mm
b
d
c
a
b
b
a
b
a
c
23
24
25 26
26A
27+26
d
c
b
a
27
28
009
Safety
O
Read these instructions carefully and retain for future
reference.
O
Remove all packaging and any labels.
O
If the plug or cord is damaged it must, for safety reasons, be
replaced by Kenwood or an authorised Kenwood repairer in
order to avoid a hazard.
O
DO NOT touch the sharp blades. The blades and discs are
very sharp, handle with care. Always hold by the finger grip
at the top, away from the cutting edge, when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
O
DO NOT process hot ingredients.
O
Be careful if hot liquid is poured into the food processor
or blender as it can be ejected out of the appliance due to
sudden steaming.
O
Never leave the appliance unattended when it is operating.
O
Do not exceed the maximum capacities stated in the
recommended usage chart.
O
Do not operate your appliance for longer than the
times specified below without a rest period. Processing
continuously for longer periods can damage your appliance.
Function/Attachment Maximum
Operation Time
Rest Period
Between
Operations
Blender/Blend-Xtract 2GO 60 secs
Unplug the
appliance and
allow to cool
down for 15
minutes
Heavy mixtures in the
bowl (e.g. Dough)
60 secs
Mini Chopper/Mill 30 secs
Grinding Mill 60 secs
O
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
O
Always remove the knife blade before pouring contents from
the bowl.
O
Keep hands and utensils out of the processor bowl and
blender goblet whilst connected to the power supply. If food
needs to be pushed down use a suitable utensil such as a
spatula.
O
Always switch off the appliance and disconnect from
the supply if it is left unattended and before assembling,
disassembling or cleaning.
O
Never use your fingers to push food down the feed tube.
Always use the pusher supplied.
O
Never fit the blade assembly to the power unit without the
goblet/bottle or mill jar/lid fitted.
2
English
3
O
CAUTION: Before removing the lid from the bowl, blender or
mill from the power unit:
O
switch off;
O
wait until the attachment/blades have completely stopped;
O
be careful not to unscrew the blender goblet/bottle or mill
jar/lid from the blade assembly.
O
Do not use the lid to operate the processor, always use the
on/off speed control.
O
This appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
O
Never use an unauthorised attachment.
O
Never use a damaged appliance. Get it checked or repaired:
see ‘Service and Customer Care’.
O
Never let the power unit, cord or plug get wet.
O
Do not let excess cord hang over the edge of a table or
worktop or touch hot surfaces.
O
Children should be supervised to ensure that they do not play
with the appliance.
O
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
O
Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
O
Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
O
Misuse of your processor, blender or mill can result in injury.
O
The maximum rating is based on the mini chopper/mill
attachment that draws the greatest load. Other attachments
may draw less power.
Blender/Blend-Xtract 2GO
O
DO NOT process hot ingredients.
O
SCALD RISK: Hot ingredients must be allowed to cool to
room temperature before placing in the goblet/bottle or
before blending.
O
Always take care when handling the blade assembly and avoid
touching the cutting edge of the blades when cleaning.
O
Only operate the blender with the lid in place.
O
Only use the goblet/bottle with the blade assembly supplied.
O
Never run the blender empty.
O
Smoothie recipes - never blend frozen ingredients that have
formed a solid mass during freezing, break it up before adding
to the goblet/bottle.
Blend-Xtract 2GO
O
Never drink any hot liquids from the bottle.
O
When drinking through the lid, take care that the drink is
4
smooth. Some experimentation may be necessary to achieve
the desired result, particularly when processing firm or
unripened foods as you may find that some ingredients remain
unprocessed.
O
Do not blend frozen ingredients or ice cubes without liquid.
O
Never blend dry ingredients (e.g. spices, nuts) or run the
Blender empty.
Mill Attachments
O
Never fit the blade assembly to the power unit without the jar/
lid fitted.
O
Never unscrew the jar/lid while the mill is fitted to your
appliance.
O
Do not touch the sharp blades – Keep the blade assembly
away from children.
O
Never remove the mill until the blades have completely
stopped.
O
The appliance will not work if the mill is incorrectly fitted.
O
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
O
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
O
Do not process dried turmeric root as it is too hard and may
damage the blades.
Express Dice/Express Serve Attachment and Discs
O
The cutting grid and discs are very sharp; handle with care
when fitting, removing and cleaning. Always hold by the
finger grip away from the cutting edge when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
O
Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
O
Do not use excessive force to push food down the feed tube –
you could damage your attachment.
O
Before removing the lid, switch off wait until the cutting disc
has completely stopped.
O
Do not pour hot liquids down the feed tube.
Express Serve
O
Avoid contact with moving parts. Keep fingers out of the food
outlet opening.
O
Do not operate when using the Dicer or Discs without the
slinger plate fitted. If the slinger plate is not fitted food will
clog under the plate and not exit the food outlet, resulting
in damage to your attachment.
5
O
The citrus juicer is not designed to be used with the Express
Serve. Always use the citrus juicer with the main bowl.
Cleaning
O
Wipe the power unit and whisk drive head with a damp cloth,
then dry. Ensure that the interlock area
is clear of food
debris.
O
Do not immerse the power unit, blade assemblies or whisk
drive head in water.
O
The bowl, lid, pusher and all attachment/tool apart from the
blade assemblies and whisk drive head are suitable for both
handwashing and dishwashing.
O
The blade assemblies should be brushed clean and rinsed
under running water.
Before plugging in
O
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
O
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1 Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2 Wash the parts see ‘Care and Cleaning’.
Key
Processor
1
Pusher
2
Feed tube
3
Lid
4
Bowl
5
Detachable drive shaft
6
Power unit
7
Speed/pulse control
8
Safety interlocks
9
Cord storage (at back)
Weighing Function
10
Kg/lb button
11
On/zero button
12
Display screen
13
Weighing tray
14A Plastic Blender (if supplied)
a Blade assembly
b Sealing ring
c Goblet
d Filler cap
e Lid
14B Glass Blender (if supplied)
a Blade assembly
b Sealing ring
c Goblet
d Lid
e Filler cap
C Standard Attachments
15
Knife blade
16
Dough tool
17
Dual whisk
18
4mm slicing/grating disc
19
2mm slicing/grating disc
20
Extra fine grating disc
Attachments
Not all of the attachments listed below may be
included with your food processor. Attachments
are dependent upon the model variant. Refer
to ‘Service and customer care’ section for
information on how to buy an attachment not
included in pack.
D Optional Attachments
21
Citrus juicer (if supplied)
22
Glass mini chopper/mill (if supplied)
23
Plastic mini chopper/mill (if supplied)
24
Grinding mill (if supplied)
25
Blend-Xtract 2GO (if supplied)
26
Express Dice (if supplied)
27
Express Serve (if supplied)
6
To Use Your Food Processor
Illustrations
1 Fit the detachable drive shaft onto the power
unit.
2 Then fit the bowl by aligning the
on the
bowl with the
on the power unit, turn
clockwise until it locks
.
3 Fit an attachment over the bowl drive shaft.
O
Always fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid - ensuring the top of the drive
shaft/tool locates into the centre of the lid.
O
Do not use the lid to operate the processor,
always use the on/off speed control.
5 Plug in, switch on and select a speed. (Refer
to the recommended usage chart).
O
The processor will not operate if the bowl
or lid are not fitted correctly into the
interlock. Check that the feed tube and
bowl handle are situated to the right front
hand corner.
O
Use the pulse (P) for short bursts. The pulse
will operate for as long as the control is held
in position.
6 Reverse the above procedure to remove the
lid, attachments and bowl.
O
Always switch off and unplug before
removing the lid.
Important
O
Your processor is not suitable for crushing
or grinding coffee beans, or converting
granulated sugar to caster sugar.
O
When adding almond essence or flavouring
to mixtures avoid contact with the plastic as
this may result in permanent marking.
Weighing Function
Illustration
Your food processor is fitted with a built in
weighing function to allow ingredients to be
weighed straight into the bowl or blender goblet.
O
The Maximum weighing capacity is 3kg.
To Use The Weighing Function
1 Always fit the bowl, detachable drive shaft
and attachment or blender goblet onto the
power unit before adding ingredients.
2 Plug in – the display screen will remain blank.
3 Press the ON/ZERO button once and the
display screen will light up.
4 Press the (kg/lb) button to select either
grams or ounces. The display will default to
kg/g when first switched on.
O
The unit weighs in 1g increments and
teaspoon/tablespoon measures are
recommended for weighing small quantities.
O
To zero press the ON/ZERO button once.
5 Weigh the required ingredients straight into
the bowl or goblet.
6 After all the ingredients are weighed fit the lid
and select a speed to operate the processor.
O
The weight of any additional ingredients
added down the feed tube whilst the
processor is running will not be shown on the
display screen.
O
The display screen can be turned off manually
by pressing and holding down the ON/ZERO
button for a few seconds.
Refer to the troubleshooting guide if you
experience any problems with operating the
weighing function.
Weighing Tray
A removable weighing tray is supplied for
weighing ingredients without the bowl or
blender.
To use, place the tray on top of the power unit
and turn clockwise to secure. Then follow steps 2
to 4 under ‘To Use The Weighing Function’.
To remove, rotate the tray anti-clockwise and lift
off.
Using The Attachments
Refer to recommended usage chart
for each attachment.
14A
Plastic Blender (if supplied)
To Use Your Blender
Illustrations
1 Fit the sealing ring into the blade
assembly - ensuring the seal is located
correctly in the grooved area.
O
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly
and insert the blades into the goblet - turn
anti-clockwise until it is secure. Refer to
the graphics on the underside of the blade
assembly as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid onto the goblet and turn clockwise
until it clicks. Fit the filler cap.
5 Place the blender onto the power unit, align
the
on the blender with the on the
power unit and turn clockwise to lock .
O
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
7
14B
Glass Blender (if supplied)
To Use Your Blender
Illustrations
(1
1 Fit the sealing ring into the blade unit -
ensuring the seal is located correctly in the
grooved area.
O
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Screw the goblet onto the blade assembly.
Refer to the graphics on the underside of the
blade unit as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and push down to
secure. Fit the filler cap.
5 Place the blender onto the power unit, align
the
on the blender with the on the
power unit and turn clockwise to lock
.
O
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
Hints and Tips
O
When making mayonnaise, put all the
ingredients, except the oil, into the blender.
Remove the filler cap. Then, with the
appliance running, add the oil slowly through
the hole in the lid.
O
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
O
The processing of spices is not
recommended as they may damage the
plastic parts.
O
To blend dry ingredients - cut into pieces,
remove the filler cap, then with the appliance
running, drop the pieces down one by one.
Keep your hand over the opening. For best
results empty regularly.
15
Knife Blade
Follow the instructions under ‘to use your food
processor’.
Hints and Tips
O
For coarser textures use the pulse control.
O
Cut food such as meat, bread, vegetables
into cubes approximately 2cm.
O
Biscuits should be broken into pieces
and added down the feed tube whilst the
appliance is running.
O
Take care not to over-process.
O
When making pastry use fat straight from
the fridge cut into 2cm cubes.
O
For best results when processing sticky
fruit/ingredients such as dates, use 'Pulse'
first to break down the ingredients and then
continue processing on maximum speed.
16
Dough Tool
Use for yeasted dough mixes.
Follow the instructions under ‘To use your food
processor’.
Hints and Tips
O
Do not process for longer than 60 seconds.
O
Place the dry ingredients in the bowl and
add the liquid down the feed tube whilst the
appliance is running. Process until a smooth
elastic ball of dough is formed.
O
Re-knead by hand only. Re-kneading in the
bowl is not recommended as it may cause
the processor to become unstable.
17
Dual Whisk
Using The Whisk
1
Fit the drive shaft and bowl onto the power
unit.
2 Push each beater securely into the drive
head.
3 Fit the whisk by carefully turning until it
drops over the drive shaft.
4 Add the ingredients.
5 Fit the lid - ensuring the end of the shaft
locates into the centre of the lid.
Hints and Tips
Important
Use for light mixes only such as egg
whites and cream.
The whisk is not suitable for making all
in one cake mixes as these mixes are too
heavy and will damage it. Always use the
knife blade.
O
Best results are obtained when the eggs are
at room temperature.
O
Ensure the bowl and whisks are clean and
free from grease before whisking.
18
20
Discs
To Use The Cutting Discs
1 Fit the drive shaft and bowl onto the power
unit.
2 Holding by the centre grip, place the disc
onto the drive shaft with the appropriate side
uppermost.
3 Fit the lid.
4 Put the food in the feed tube.
8
5 Switch on and push down evenly with the
pusher
1
- never put your fingers in the
feed tube.
Hints and Tips
O
Use fresh ingredients
O
Do not cut food too small. Fill the width of
the feed tube fairly full.This prevents the food
from slipping sideways during processing.
O
When slicing or grating: food placed
upright comes out shorter than food placed
horizontally.
O
There will always be a small amount of waste
on the disc or in the bowl after processing.
21
Citrus Juicer (if supplied)
a Cone
b Sieve
To use the citrus juicer
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the
sieve handle is locked into position directly
over the bowl handle.
3 Place the cone over the drive shaft turning
until it drops all the way down.
4 Cut the fruit in half. Then switch on and press
the fruit onto the cone.
O
The citrus juicer will not operate if the sieve
is not locked correctly.
Hints and Tips
O
For best results store and juice the fruit
at room temperature and hand roll on a
worktop before juicing.
O
To help with juice extraction move the fruit
from side to side when juicing.
O
When juicing large quantities, empty the
sieve regularly to prevent the build up of
pulp and seeds.
22
/
23
Mini Chopper/Mill (if supplied)
a Jar
b Sealing ring
c Blade assembly
1
Put the ingredients into the jar.
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower
it into the jar, blades down.
4
Screw the blade assembly onto the jar until
finger tight. Refer to the graphics on the
underside of the blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit, align the
on the mill with the on the power unit
and turn clockwise to lock .
6
Select Maximum speed or use the pulse (P).
Hints and Tips
O
Baby food/purée - allow cooked food to
cool down to room temperature before
processing in the mill.
O
For best results the main bowl is
recommended when chopping herbs.
24
Grinding Mill (if supplied)
a Mill lid
b Grinding mill blade assembly
1 Place your ingredients into the blade
assembly.
2 Fit the lid and turn clockwise to lock.
3 Place the mill onto the power unit and turn
clockwise to lock.
4 Select maximum speed or use the pulse (P).
Hints and Tips
O
For optimum performance when processing
spices do not process more than 50g at a
time.
O
Whole spices retain their flavour for a much
longer time than ground spices so it is best
to grind a small quantity fresh at a time to
retain the flavour.
O
To release the maximum flavour and
essential oils whole spices are best roasted
prior to milling.
O
Do not process dried turmeric root in the
mill as it is too hard and may damage the
blades.
O
Cut ginger and coconut into small pieces
before processing.
O
For best results the main bowl is
recommended when chopping herbs.
25
Blend-Xtract 2GO
(if supplied)
a
Dispensing lid
b Bottle
c Sealing ring
d Blade assembly
1 Add ingredients to the bottle up to the
400ml level mark.
O
For best blending performance always add
ice/frozen ingredients to the bottle first.
O
When adding frozen ingredients (i.e. frozen
fruit, yoghurt, ice cream or ice) do not blend
more than 60g or 3 ice cubes.
O
Do not blend frozen ingredients without
liquid.
9
2 Fit the sealing ring to the blade unit, ensuring
the seal is located correctly in the grooved
area.
O
Leaking will occur if the seal is damaged or
incorrectly fitted.
3 Hold the underside of the blade unit and
lower it onto the bottle, blades down.
4 Screw the blade holder onto the bottle - turn
clockwise to lock.
O
Shake to disperse the ingredients.
O
Place the blender onto the power unit and
turn clockwise to lock.
5 Select maximum speed. Allow the ingredients
to blend until smooth.
O
Once your drink has reached the desired
consistency, you can use the pulse ‘P’ to
ensure all ingredients are thoroughly blended.
Hints and Tips
O
Note that when the bottle is filled to max
capacity (400ml), this is approximately two
servings.
O
If you do not intend to consume your drink
immediately, keep it refrigerated.
O
Ensure your drink is thin enough to be able
to drink from the dispensing lid. To make a
thinner drink add more liquid.
O
After blending, some drinks may not be
completely smooth due to seeds or the
fibrous nature of ingredients.
O
Some drinks may separate on standing,
therefore it is best to drink them straight
away. Separated drinks should be stirred
before drinking.
O
When the dispensing lid is fitted always keep
the bottle upright.
Using the drinking lid
1 Fit and lock the lid by turning clockwise.
2 When you want to drink,simply flip open the
lid cover. The drink can be consumed straight
from the bottle.
26
Express Dice (if supplied)
a Dicing disc
b Dicing grid
c Dicing pusher
Important
O
The dicing disc is designed only to be used
with the dicing attachment.
O
The dicing pusher should only be used with
the dicing grid. Using it without the dicing
grid fitted will result in damage to the bottom
of the pusher.
To use the Express Dice
1 Fit the drive shaft and bowl onto the power
unit.
2 Add the dicing disc and fit the lid.
3 Fit the dicing grid into the feed tube.
4 Switch on and use the dicing pusher to
process food items through the dicing grid.
Hints and Tips
O
To assist with processing place both hands on
top of the pusher and press down firmly.
O
For best results, use raw fresh fruit and
vegetables.
O
To prevent the food from jamming do not
pack the food tightly in the feed tube –
ideally the food should be cut no larger than:
50 X 30mm
O
If the food is too hard to push through the
grid cook for approximately 10-15 minutes,
then allow to cool in a refrigerator before
processing.
O
Always remove hard skins, stones, pips and
seeds etc., from food before processing.
Note:
O
Due to the various sizes and shapes of
foods, the diced results will contain some
misshapen pieces, this is normal.
O
Foods such as cheese, ham, and chorizo will
clog in the grid so are not recommended for
use with this attachment.
Cleaning the grid
Use the end of the pusher to dislodge any food
which may become trapped in the dicing grid.
26A
The Express Dice can also be used to
produce French fries, crudités and batons.
1 Fit the dicing grid without the dicing disc.
2 Then manually push the food through the
grid without switching the appliance on.
10
27
Express Serve
(if supplied)
a Express serve drive shaft
b Extension chute
c Base
d Slinger plate
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the small drive shaft to the main shaft –
the Express serve will not operate unless
fitted.
3 Fit the required attachment/disc - do not
apply excessive force. Refer to the Discs and
Express Dice sections for further information,
hints and tips.
4 Fit the lid.
Use in conjunction with the following:
18-19-20
26
Important - Dicer and Discs
O
If the food is not exiting the food outlet, switch
off and check that food is not clogging under
the disc and the slinger plate is fitted. Clear
any trapped food before continuing to process.
Care and Cleaning
O
Always switch off and unplug before cleaning.
O
Handle the blade and cutting discs with care
- they are extremely sharp.
O
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
O
Wipe with a damp cloth, then dry. Ensure
that
the interlock area
is clear of food debris.
O
Do not immerse the power unit in water.
O
Store excess cord in the storage area at the
back of the power unit
.
Cleaning Instructions - Refer
to the relevant illustration
28
.
Service and Customer Care
O
If you experience any problems with the
operation of your appliance, before requesting
assistance refer to the ‘Troubleshooting
Guide’ section in the manual or visit
www.kenwoodworld.com.
O
Please note that your product is covered
by a warranty, which complies with all legal
provisions concerning any existing warranty
and consumer rights in the country where the
product was purchased.
O
If your Kenwood product malfunctions or you
find any defects, please send it or bring it to
an authorised KENWOOD Service Centre.
To find up to date details of your nearest
authorised KENWOOD Service centre visit
www.kenwoodworld.com or the website
specific to your Country.
O
Designed and engineered by Kenwood in the
UK.
O
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH THE EUROPEAN DIRECTIVE ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
At the end of its working life, the product must
not be disposed of as urban waste. It must be
taken to a special local authority differentiated
waste collection centre or to a dealer providing
this service.
11
Recommended Usage Chart
Do not operate your appliance for longer than the times specified below without a rest period.
Do not exceed the maximum capacities stated in the chart below.
Processing continuously for longer periods can damage your appliance.
Processing information supplied is for guidance only and will vary depending on the exact recipe and
ingredients being processed.
Do not process hot ingredients
Tool/
Attachment
Function
(Secs)
All in one cake mixes 2 10 1.2kg total
weight
Pastry - rubbing fat into flour
Adding water to combine pastry
ingredients
2
1 – 2
10
10 – 20
300g flour
weight
Chopping fish and lean meat
Pâtés and terrines
2 10 – 30 400g max
lean beef
Chopping vegetables P 5 – 10 100 - 250g
Chopping nuts 2 30 – 60
100g – 200g
Herbs 2 20 – 30 30-50g
Mayonnaise 2 60 – 80 4 egg yolks
Pureeing soft fruit, cooked fruit and
vegetables
2 10 – 30 500g
Egg whites 2 60 – 120 2 – 6 (200g)
Whipping cream (Processing times may
vary, depending on fat content of cream)
2 60 – 120 250-500ml
Yeasted mixes 2 60 340g flour
weight
550g total
weight
Grating and slicing firm food items -
cheese, carrots, potatoes and foods of a
similar texture
2–
Do not fill
above the
maximum 1.2L
marked on
the bowl
Slicing softer food items - cucumbers and
tomatoes
1–
Grates Parmesan cheese 2
Use to squeeze the juice from citrus fruits
e.g.oranges, lemons, limes and grapefruits.
1–
12
Tool/
Attachment
Function
(Secs)
Cold liquids and drinks
(Add ice/frozen ingredients to goblet
last)
2 30 – 60
1.2 litre
Milkshake/Cold milk based mixtures 2 15 – 30 1 litre
Ice crushing P 30 – 40 6 ice cubes
(125g)
Batter mix
(Add liquid ingredients first)
1
2
10
50
1 litre
Nuts 2 10 – 30 50g
Coee beans 2 30 50g
Uncooked meat (beef steak) cut into 2cm
cubes
P570g
Processing spices
Black peppercorns, cardamom seeds,
cumin seeds, coriander seeds and fennel
seeds
2
30 – 60
50g
Grinding coee beans 2 50g
Chopping nuts P 50g
Processing garlic cloves, fresh chillies and
root ginger
P 30g
Fresh coconut 2/P 30 – 60 40g
Drinks & smoothies 2 30 – 60 400ml
Use to cut a variety of foods such as
carrot, courgette, cucumber, beetroot and
apples into cubes.
2–
Do not fill
above the
maximum
capacity
marked on
the bowl
Use to cut a variety of foods into French
Fries and crudités such as potato, carrot,
courgette and cucumber.
Manual
13
Troubleshooting Guide
Problem Cause Solution
The processor will not
operate.
No Power.
Bowl not fitted to power unit
correctly.
Bowl lid not locked on
correctly.
Check processor is plugged in.
Check bowl is located correctly and the
handle is situated towards the right front
hand corner.
Check that the lid interlock is located
correctly into the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit
breaker in your home.
Detachable drive shaft
not
fitted to power unit.
Fit the detachable drive shaft
onto the
power unit before fitting the bowl. The
bowl tools and attachments will not operate
unless the drive shaft is fitted.
Blender, Blend-Xtract
2GO or mill will not
operate
Blender, Blend-Xtract 2GO or
mill not locked on correctly.
Blender, Blend-Xtract 2GO or
mill not assembled correctly.
Blender, Blend-Xtract 2GO or mill will not
operate if fitted incorrectly to the interlock.
Check blade assembly is fully tightened into
the goblet/bottle/jar
Processor stops during
processing
Processor overloaded/
maximum capacities
exceeded.
Lid unlocked.
Check maximum capacities stated in the
recommended usage chart.
Check lid is locked correctly.
Blender, Blend-Xtract
2GO or multi mill leaking
from blade assembly
base.
Seal missing
Seal incorrectly fitted
Seal damaged.
Check seal is fitted correctly and not
damaged. To obtain a replacement seal see
‘Service and customer care’.
Unit unstable/heavy
vibrations and movement.
Sticky fruit/ingredients such
as dates being processed.
Speed selected too low.
For best results use 'Pulse' first to break
down the ingredients and then continue
processing on maximum speed.
Poor performance of
tools/attachments
Refer to hints in relevant ‘Using the attachment’ section. Check attachments
are assembled correctly.
Weighing Function
Display screen freezes
on [- - - -]
The display screen will freeze
during operation.
Display screen showing a
minus reading due to display
not ‘zeroed’ and either
ingredients or the bowl/lid/
attachment is removed.
Quantity weighed too small.
Normal operation.
Either zero the screen or replace the missing
ingredients or refit the bowl/lid/attachment.
Use teaspoon and tablespoon
measures for very small quantities.
Weight changed on
display
Power unit moved during
operation.
Always place the processor on a dry flat
surface prior to weighing.
Do not move the power unit during operation
of the weighing function.
Zero the display before weighing next
ingredients
Display screen turned o Power unit unplugged
The display screen will turn
o automatically if the same
weight reading is shown after
5 minutes.
Plug appliance in.
Press the ON/ZERO button once and the
display screen will light up.
Display showing [0 – Ld] Weighing function overloaded
Excessive force applied to
power unit.
Do not exceed the maximum weighing
capacity of 3Kg.
Do not subject the power unit to excessive
force as this may damage the weighing
sensor.
14
Veiligheid
O
Lees deze instructies zorgvuldig door en bewaar ze voor
toekomstig gebruik.
O
Verwijder de verpakking en alle labels.
O
Als de stekker of het snoer beschadigd is, moet het om
veiligheidsredenen door Kenwood of een door Kenwood
geautoriseerd reparatiebedrijf vervangen worden, om gevaar
te voorkomen.
O
Raak de scherpe mesjes niet aan. De messen en de schijven
zijn erg scherp; ga er dus voorzichtig mee om. Bij het
hanteren van de scherpe snijbladen, het legen van de
kom en tijdens schoonmaken altijd vasthouden aan de
vingergreep aan de bovenkant, weg van de snijkant.
O
Verwerk NOOIT hete ingrediënten.
O
Wees voorzichtig als er hete vloeistof in de keukenmachine
of blender wordt gegoten omdat deze door het apparaat
kan worden uitgeworpen door plotseling stomen.
O
Laat het apparaat nooit onbeheerd terwijl het aan staat.
O
Nooit de opgegeven maximumcapaciteit overschrijden: zie
tabel voor aanbevolen gebruik.
O
Gebruik uw apparaat nooit langer dan hieronder staat
aangegeven zonder een pauze. Als u het apparaat langere
tijd zonder pauze gebruikt, kan dat schade veroorzaken.
Functie / hulpstuk Maximale
inschakeltijd
Pauze tussen twee
inschakelingen
Blender/Blend-
Xtract 2GO
60 sec.
Haal de stekker uit
het stopcontact en
laat het apparaat
15 minuten afkoelen
Zware mengsels in
de kom (bijv. deeg)
60 sec.
Mini hakhulpstuk /
de molen gebruiken
30 sec.
Maalmolen 60 sec.
O
Til de keukenmachine niet bij het handvat op en draag hem
evenmin op die manier; hierdoor kan het handvat afbreken,
waardoor u letsel kunt oplopen.
O
Voordat u de inhoud uit de kom giet, dient u altijd eerst het
mes te verwijderen.
O
Houd uw handen en keukengereedschap uit de kom van de
keukenmachine en de beker van de blender, wanneer het
apparaat op het lichtnet is aangesloten. Als voedsel naar
beneden moet worden geduwd, gebruik dan een geschikt
gereedschap zoals een spatel.
O
Schakel het apparaat altijd uit en koppel het los van het
stopcontact als deze onbeheerd wordt achtergelaten en vóór
montage, demontage of reiniging.
Nederlands
Vouw voor het lezen a.u.b. de voorpagina met illustraties uit
1 / 1