Yamaha DVD-S657 El kitabı

DVD AUDIO/VIDEO SA-CD PLAYER

LECTEUR DE DVD AUDIO/VIDEO SA-CD

DVD-S657

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

G

DVD-S657

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Hungary

3139 246 15093

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

i

Important notes for users in the

U.K.

Mains plug

This apparatus is fitted with an approved 13

Amp plug. To change a fuse in this type of plug

proceed as follows:

1

Remove fuse cover and fuse.

2

Fix new fuse which should be a BS1362 5 Amp,

A.S.T.A. or BSI approved type.

3

Refit the fuse cover.

If the fitted plug is not suitable for your jack

outlets, it should be cut off and an appropriate

plug fitted in its place.

If the mains plug contains a fuse, this should

have a value of 5 Amp. If a plug without a fuse

is used, the fuse at the distribution board should

not be greater than 5 Amp.

Note: The severed plug must be disposed to avoid

a possible shock hazard should it be inserted into

a 13 Amp jack elsewhere.

How to connect a plug

The wires in the mains lead are coloured with

the following code: blue = neutral (N),

brown = live (L).

●

As these colours may not correspond with the

colour markings identifying the terminals in your

plug, proceed as follows:

– Connect the blue wire to the terminal

marked N or coloured black.

– Connect the brown wire to the terminal

marked L or coloured red.

– Do not connect either wire to the earth

terminal in the plug, marked E (or e) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain

that the cord grip is clamped over the sheath of

the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require

consent. See Copyright Act 1956 and The

Performer’s Protection Acts 1958 to 1972.

VAROITUS

Muiden kuin tässä esitettyjen toimintojen säädön tai

asetusten muutto saattaa altistaa vaaralliselle säteilylle

tai muille vaarallisille toiminnoille.

DK

Advarsel: Usynlig laserstråling ved åbning når

sikkerhedsafbrydere er ude af funktion. Undgå

utsættelse for stråling.

Bemærk: Netafbryderen STANDBY/ON er

sekundært indkoblet og ofbryder ikke strømmen fra

nettet. Den indbyggede netdel er derfor tilsluttet til

lysnettet så længe netstikket sidder i stikkontakten.

N

Observer: Nettbryteren STANDBY/ON er sekundert

innkoplet. Den innebygdenetdelen er derfor ikke

frakoplet nettet så lenge apparatet er tilsluttet

nettkontakten.

S

Klass 1 laseraparat

Varning! Om apparaten används på annat sätt än i

denna bruksanvisning specificerats, kan användaren

utsättas för osynlig laserstrålning, som överskrider

gränsen för laserklass 1.

Observera! Strömbrytaren STANDBY/ON är

sekundärt kopplad och inte bryter inte strömmen från

nätet. Den inbyggda nätdelen är därför ansluten till

elnätet så länge stickproppen sitter i vägguttaget.

SF

Luokan 1 laserlaite

Varoitus! Laitteen käyttäminen muulla kuin tässä

käyttöohjeessa mainitulla tavalla saattaa altistaa

käyttäjän turvallisuusluokan 1 ylittävälle

näkymättömälle lasersäteilylle.

Oikeus muutoksiin varataan. Laite ei saa olla alttiina

tippu-ja roiskevedelle.

Toiminnanvalitsin STANDBY/ON on kytketty

toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.

Sisäänrakennettu verkko-osa on kytkettynä

sähköverkkoon aina silloin, kun pistoke on

pistorasiassa.

VARO!

AVATTAESSA JA SUOJALUKITUS

OHITETTAESSA OLET ALTTIINA

NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄ TEESEEN.

VARNING

!

OSYNLIG LASERSTRÅLNING NÄR DENNA

DEL ÄR ÖPPNAD OCH SPÄRREN ÄR

URKOPPLAD. BETRAKTA EJ STRÅLEN.

ii

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein

may result in hazardous radiation exposure.

ATTENTION

L’emploi de commandes, de réglages ou un

choix de procédures différents des

spécifications de cette brochure peut entraîner

une exposition à d’éventuelles radiations pouvant

être dangereses.

ACHTUNG

Die Verwendung von Bedienungselementen oder

Einstellungen oder die Durchführung von

Bedienungsvorgängen, die nicht in dieser

Anleitung aufgeführt sind, kann zu einem Kontakt

mit gefährlichen Laserstrahlen führen.

OBSERVERA

Användning av kontroller och justeringar eller

genomförande av procedurer andra än de som

specificeras i denna bok kan resultera i att du

utsätter dig för farlig strålning.

ATTENZIONE

Uso di controlli o regolazioni o procedure non

specificamente descritte può causare

l’esposizione a radiazioni di livello pericoloso.

PRECAUCIÓN

El uso de los controles o los procedimientos de

ajuste o utilización diferentes de los

especificados en este manual pueden causar

una exposición peligrosa a la radiación.

VOORZICHTIG

Gebruik van bedieningsorganen of instellingen,

of uitvoeren van handelingen anders dan staan

beschreven in deze handleiding kunnen leiden

tot blootstelling aan gevaarlijke stralen.

ПРЕДУПРЕЖДЕНИЕ

Использование органов управления или

настроек или выполнение процедур, отличных

от описанных в данном руководстве, могут

привести к опасному облучению.

INVISIBLE LASER RADIATION WHEN OPEN

DO NOT STARE INTO BEAM

CAUTION:

INVISIBLE LASER RADIATION WHEN OPEN

AVOID DIRECT EXPOSURE TO THE BEAM

DANGER:

The unit is not disconnected from the AC power source as long

as it is connected to the wall outlet, even if this unit itself is

turned off. This state is called the standby mode. In this state, this

unit is designed to consume a very small quantity of power.

L’appareil n’est pas isolé de la source d’alimentation aussi

longtemps qu’il reste branché sur une prise murale, même

lorsqu’il est éteint. Il est alors dit en mode «Veille». Dans ce

mode, l’appareil consomme très peu de courant.

Das Gerät ist nicht vom Netz getrennt, solange der Netzstecker

noch mit der Wandsteckdose verbunden ist, selbst wenn das

Gerät ausgeschaltet wurde. Dieser Betriebszustand wird als

Bereitschaftsmodus bezeichnet. In diesem Zustand nimmt das

Gerät eine sehr geringe Menge Strom auf.

Enheten är inte urkopplad från nätet så länge som den är

ansluten till vägguttaget även om enheten i sig självt är avstängd.

Detta kallas för beredskapsläge och i detta tillstånd konsumerar

apparaten minimalt med ström.

L’unità non è scollegata dall’impianto elettrico di casa sintanto

che rimane collegata ad una presa di corrente anche se è spenta.

Questo modo viene chiamato “modo di attesa”. In esso, l’unità

consuma una quantità molto bassa di energia per mantenere in

memoria le impostazioni da voi fatte.

Aunque el propio aparato se encuentre apagado, éste no se

desconectará de la fuente de CA siempre que se mantenga

enchufado a la toma de corriente. Este estado recibe el nombre

de “modo de espera”. En este estado, este aparato ha sido

diseñado para consumir una cantidad muy pequeña de energía.

De stroomtoevoer naar het toestel is niet afgesloten zolang de

stekker nog in het stopcontact zit, zelfs niet als het toestel zelf

uitgeschakeld is. Deze toestand wordt “standby” (waak- of

paraatstand) genoemd. Het toestel is ontworpen om in deze

toestand.

Данное устройство не отсоединено от источника

переменного напряжения до тех пор, пока оно

подключено к настенной розетке, даже если само

данное устройство выключено. Это состояние

называется режимом готовности. В этом состоянии

данное устройство потребляет очень малое

количество электроэнергии.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL

ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.

VARNING

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA

DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARO!

AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

NÄKYMÄTTÖMÄLLE LASER SÄ TEILYLLE. ÄLÄ KATSO

SÄTEESEEN.

VORSICHT

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG

WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL

AUSSETSEN.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

ATTENTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS

D’OUVERTURE. EXPOSITION DANGEREUSE AU

FAISCEAU.

ПРЕДУПРЕЖДЕНИЕ

ПРИ ОТКРЫТИИ УСТРОЙСТВА ВЫ МОЖЕТЕ

ПОДВЕРГНУТЬСЯ ВОЗДЕЙСТВИЮ ВИДИМОГО И

НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ.

ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА.

iii

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2

Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, or cold. In a

cabinet, allow about 2.5cm (1 inch) of free space

all around this unit for adequate ventilation.

3

Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4

Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in

an environment with high humidity (i.e., a room

with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5

Avoid installing this unit in a location where

foreign objects may fall onto this unit or where

this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may

cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical

shock to the user and/or damage to this unit.

6

Do not cover this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

7

Do not plug in this unit to a wall outlet until all

connections are complete.

8

Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9

Do not use excessive force on switches, knobs

and/or cords.

10

When disconnecting the power cord from the

wall outlet, grasp the plug; do not pull the cord.

11

Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12

Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from

use of this unit with a voltage other than as

specified.

13

To prevent damage by lightning, disconnect the

power cord from the wall outlet during an

electrical storm.

14

Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reason.

15

When not planning to use this unit for long

periods of time (i.e., vacation), disconnect the AC

power plug from the wall outlet.

16

Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

17

Before moving this unit, press STANDBY/ON to

set the unit in standby mode, then disconnect the

AC power plug from the wall outlet.

When playing DTS encoded CDs, excessive noise will

be heard from the analog stereo outputs. To avoid

possible damage to the audio system, the consumer

should take proper precautions when the analog

stereo outputs of the player are connected to an

amplification system. To enjoy DTS Digital

Surround™ playback, an external 5.1-channel DTS

Digital Surround™ decoder system must be

connected to the digital output of the player.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the

cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc tray

and other openings or look inside.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

1

English

Contents

Introduction

Region Codes..............................................................3

Supplied accessories..................................................3

Notes about discs ......................................................3

Cleaning discs..............................................................3

Patent information.....................................................3

Functional Overview

Front Panel ..................................................................4

Rear Panel....................................................................5

Remote Control.........................................................6

Preparation

General Notes on connections ..............................7

Digital Connections...................................................7

Analog Connections..................................................8

6ch discrete jacks..................................................................8

MIXED 2CH jacks................................................................8

Video Connections....................................................9

S-Video terminal <A>.......................................................9

Composite Video terminal <B>..................................9

Component Video terminal <C> ..............................9

SCART Connection <D>...............................................9

Getting Started

Inserting batteries into the Remote Control ... 10

Using the remote control.............................................10

Turning on the power............................................ 10

Selecting the color system that corresponds to

your TV ..................................................................... 10

Setting language preference.................................. 11

Setting the OSD Language...........................................11

Setting the Audio, Subtitle and Disc menu

language...................................................................................12

Setting Speaker Channels......................................12

Disc Operations

Basic Playback........................................................... 14

General Operation..................................................14

Pausing playback.................................................................14

Selecting track/chapter ...................................................14

Searching backward/forward.......................................14

Stopping playback..............................................................14

Selecting various repeat/shuffle functions.......... 15

Repeat......................................................................................15

Repeating a section within a chapter/track.........15

Shuffle.......................................................................................15

Operations for video playback (DVD/VCD/SVCD) .... 15

Using the Disc Menu.......................................................15

Zooming in............................................................................16

Resuming playback from the last stopped

point..........................................................................................16

On-Screen Display (OSD)...........................................16

Special DVD Features ............................................17

Playing a Title.......................................................................17

Camera Angle......................................................................17

Audio........................................................................................17

Subtitles...................................................................................17

Special VCD & SVCD Features............................18

Playback Control (PBC).................................................18

Preview Function ...............................................................18

DVD-Audio Features..............................................19

Changing pages...................................................................19

Playing bonus groups.......................................................19

DVD-Video mode ............................................................19

SA-CD (Super Audio CD) ....................................20

Playing a disc.........................................................................20

Changing the SA-CD playback area and layer.....20

Playing MP3/DivX/JPEG/Kodak Picture CD......... 21

General Operation...........................................................21

Selecting a folder and track/file..................................21

Repeat......................................................................................21

Special picture disc features..................................22

Preview Function (JPEG)...............................................22

Zoom picture.......................................................................22

Playback with multi-angles............................................22

Scan Effect..............................................................................22

Playing MP3 music and JPEG picture

simultaneously .....................................................................22

2

Contents

Setup Menu

General Setup Menu............................................... 23

Selecting DVD-Audio/Video mode........................23

Locking/Unlocking the disc for viewing.................23

Dimming player’s front panel display .....................23

Programming disc tracks (not for Picture

CD/MP3)................................................................................24

OSD Language....................................................................24

Screen Saver.........................................................................24

Sleep Timer...........................................................................25

DivX

®

VOD registration code..................................25

Audio Setup Menu .................................................. 25

Setting the analog output..............................................25

Setting the Digital output..............................................26

Speaker Setup......................................................................26

CD Upsampling..................................................................26

Night Mode...........................................................................27

Video Setup Menu................................................... 27

TV Type..................................................................................27

Setting the TV Display....................................................27

Progressive ............................................................................28

Picture Setting......................................................................28

Switching the YUV/RGB................................................29

Preference Setup Menu ......................................... 29

Audio, Subtitle, Disc Menu ..........................................29

Restricting playback by Parental Control.............29

PBC (Playback Control).................................................30

MP3/JPEG Menu.................................................................30

Playback of VR Format...................................................30

Changing the Password..................................................32

Restoring to original settings.......................................32

Language Codes....................33

Troubleshooting....................35

Glossary .................................37

Specifications.........................39

3

English

Introduction

Thank you for purchasing this unit. This

Owner’s Manual explains the basic

operation of this unit.

DVD discs must be labeled for

ALL regions or Region 2 in

order to play on this Player. You

cannot play discs that are labeled

for other regions.

– Remote control

– Batteries (two AA size) for remote

control

– Audio pin cable

– Video pin cable

– Owner’s Manual

– This unit is designed for use with DVD

video, Video CD, Super video CD,

DVD-Audio, Super Audio CD (SA-CD),

Audio CD, CD-R, CD-RW, DVD+RW,

DVD+R, DVD-R, DVD-RW and DVD-

RW (VR format).

This unit can play:

– MP3, picture (Kodak, JPEG) files on CD-

R(W).

– JPEG/ISO 9660 format

– Maximum 30 characters display.

– DivX

®

disc on CD-R[W]/DVD+R[W]/

DVD-R[W] (3.11, 4.x and 5.x)

– Dual layer DVDs

– CD-R, CD-RW, DVD+R/RW, DVD-R/

RW and DVD-RW (VR format) cannot

be played unless finalized.

– Some discs cannot be played depending

on the recording conditions such as PC

environment and application software.

The characteristics and condition of the

discs; materials, scratches, curvature,

etc., may result in failure.

– Be sure to use only CD-R and CD-RW

discs made by reliable manufacturers.

– Do not use any non standard shaped

discs (heart, etc.).

– Do not use disc with tape, stickers, or

paste on it. Doing so may damage the

unit.

– Do not use a disc which has been

printed on its surface by a commercially

available label printer.

• When a disc becomes dirty, clean it

with a cleaning cloth. Wipe the disc

from the center out. Do not wipe in a

circular motion.

• Do not use solvents such as benzine,

thinner, commercially available cleaners,

or antistatic spray intended for analog

records.

Manufactured under license from

Dolby Laboratories.

“Dolby”, “Pro Logic”, and the

double-D symbol are trademarks

of Dolby Laboratories.

“DTS” and “DTS Digital

Surround” are registered

trademarks of Digital Theater

Systems, Inc.

DivX, DivX Certified, and

associated logos are trademarks

of DivXNetworks, Inc and are

used under license.

Region Codes

Supplied accessories

Notes about discs

ALL

2

Cleaning discs

Patent information

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and

other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation, and is intended for home

and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

02_EN_body_DVD-S657_G.fm Page 3 Friday, April 15, 2005 10:55 AM

4

Functional Overview

Front Panel

A.DRCT ML.CH D.MIX

STANDBY/ON

– turns on this unit or sets it to the

standby mode

Disc tray

B PLAY

– starts playback

/ OPEN/CLOSE

– opens or closes the disc tray

9 STOP

– stops playback

; PAUSE

– pauses playback

DVD-AUDIO indicator

– lights up when the player detects

DVD-Audio signals

SA-CD indicator

– lights up when the player detects

SA-CD signals

PROGRESSIVE indicator

– lights up when the unit enters

Progressive mode

Front panel display

– shows information about the

operational status of the unit

A.DRCT

– lights up when you enter the AUDIO

DIRECT mode by pressing the AUDIO

DIRECT button on the remote control

during audio disc playback

ML.CH

– lights up when you play multi-channel

audio source

D.MIX

– lights up when you play the discs that

allow down mixing of the multi-channel

audio sources

5

English

Functional Overview

Caution: Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

Rear Panel

AV terminal

– connects to a TV with a

SCARTcable

S VIDEO output

– connects to an S-Video input on your

AV receiver

AC Power Cord

– connects to a standard AC outlet

COAXIAL digital audio output

– connects to a digital (coaxial) input of

your AV receiver or stereo system

VIDEO output

(composite video out)

– connects to a video input on your

AV receiver

COMPONENT video outputs

– connect to an AV receiver with Y

P

B/CB PR/CR inputs

OPTICAL digital audio output

– connects to a digital (optical) input on

your AV receiver or stereo system

6ch discrete output

– connect to the 6ch input jacks

on your AV receiver

MIXED 2CH output

– connect to the audio jacks on

your AV receiver or stereo

system

6

Functional Overview

* Press and hold button for about two seconds.

Remote Control

B/

|

– turns on this player or sets it

to the standby mode

numeric buttons

– selects numbered items in the

currently displayed menu

ON SCREEN

– accesses or clears the player’s

On Screen Display menu

SETUP

– accesses or clears the player’s

setup menu

T

– searches forward*

– moves to the next chapter or

track

SUBTITLE

– selects the language for

subtitles

ANGLE

– selects the DVD camera angle

ZOOM

– enlarges the video image

AUDIO

– selects the audio language or

format selector

– changes the Hybrid SA-CD

playback layer

REPEAT

– repeats the chapter, track,

title ordisc

A-B

– repeats a specific segment

SHUFFLE

– plays tracks in random order

SCAN

– plays the first 6 seconds or

less of each track/chapter on

the disc

AUDIO DIRECT

– switches video output on and

off during audio disc playback

PAGE

– turns the pages of

DVD-Audio still pictures

DIMMER

– use to select from 3 different

brightness levels

for the display

SOUND MODE

– selects a sound mode: Stereo,

V

irtual Surround or Multi-channel

– changes the SA-CD

playback area

TOP MENU/RETURN

– displays the top-level disc

menu (DVD)

– moves back to the previous

menu (VCD)

MENU

– accesses the disc’s menu

(for DVDs)

– switches PBC on/off

(for VCDs)

1 2 3 4

– (left/right/up/down) selects an

item in the currently displayed

menu

ENTER/OK

– acknowledges the menu

selection

S

– searches backward*

– moves to the previous chapter

or track

STOP ( 9 )

– stops playback

PLAY ( B )

– starts playback

PAUSE ( ; )

– pauses playback temporarily

– frame-by-frame playback

7

English

Preparation

Never make or change connections with

the power switched on.

• Depending on the equipment you wish

to connect, there are various ways you

could connect this unit. Possible

connections are shown in the following

drawings.

• Please refer to the manuals of other

equipment as necessary to make the

best connections.

• Do not connect this unit via your VCR.

The video quality could be distorted by

the copy protection system.

• Do not connect this unit’s audio out

jack to the phono in jack of your audio

system.

This unit has COAXIAL and OPTICAL

digital out jacks. Connect one or both of

them to your AV receiver equipped with

Dolby digital, DTS, or MPEG decoder

using a commercially available cable.

You will need to set this unit’s digital

output to ALL (see page 26

“DIGITAL OUTPUT”).

Note:

– If the audio format of the digital output

does not match the capabilities of your

receiver, the receiver will produce a strong,

distorted sound or no sound at all. Make

sure to select the appropriate audio format

at menu screen included on the disc.

Pressing AUDIO once or more may change

not only audio languages but also audio

formats, and the selected format appears

for several seconds on the status window.

– SA-CD audio signals are not output from

the DIGITAL OUT jacks.

– If you wish to enjoy Dolby Digital, DTS, and

MPEG format, you must connect this player

to an AV receiver that supports these

formats.

General Notes on connections

Digital Connections

COAXIAL

IN

OPTICAL

IN

C

O

AV receiver

Left front

speaker

Right surround

speaker

Center

speaker

Subwoofer

Right front

speaker

Left surround

speaker

Surround

back speaker

8

Preparation

This player has two types of analog output

jacks.

6ch discrete jacks

To reproduce multi-channel Super Audio

CD and DVD-Audio, connect these jacks

to your AV receiver’s multi channel input

jacks using commercially available audio

pin cables.

MIXED 2CH jacks

Use the audio/video cable supplied with

this player to connect the L (left) and R

(right) jacks to the corresponding input

jacks of your audio component, such as a

stereo amplifier. You can connect a

subwoofer to the SUBWOOFER jack.

Analog Connections

R L

FRONT

RL

SURROUND

CENTER

SUBWOOFER

AV receiver

Left surround

speaker

Left front

speaker

Surround

back speaker

Right front

speaker

Right surround

speaker

Subwoofer

Center

speaker

1 CD/DVD

RL

L

R

L

Subwoofer

Stereo

amplifier

Left

speaker

Right

speaker

9

English

Preparation

If your AV receiver has video output jacks,

connect your receiver (and then to your

TV) so that you can use one TV for several

different video sources (LD, VCR, etc.) by

simply switching the input source selector

of your receiver.

The player has four types of video output

jacks. Use one of them in accordance with

the input jacks of the equipment to be

connected.

S-Video terminal <A>

S (separate) video connection achieves a

clearer picture than composite video

connection by separating color and

luminance when transmitting signals. Use

commercially available S-video cable.

Receiver (and TV) with S-video input is

required.

Composite Video terminal <B>

Use the supplied video pin cable when

connecting the player to an AV receiver.

Component Video terminal <C>

Component video connection achieves

high fidelity in reproducing colors (better

performance than S-video connection),

separating video signal into luminance (Y,

terminal color-coded as green), and color

difference (Pb, blue/Pr, red). Use

commercially available coaxial cables.

Receiver (and TV) with component input is

required. Observe the color of each jack

when connecting. If your receiver does not

have component output jacks, connecting

the player’s component output directly to

your TV’s component input can reproduce

better video image.

Note:

– You need to set this unit’s component

output to YUV (see page 29 “Switching the

YUV/RGB”).

SCART Connection <D>

If your TV has only terminal for video

input, and you want to connect it directly

to this unit, you can use this unit’s SCART

output jack.

Note:

– Ensure that the “TV” indication on SCART

cable is connected to the TV set and “DVD”

indication on SCART cable is connected to

this unit.

Video Connections

VIDEO

OUT

VIDEO

IN

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

OUT

S VIDEO

IN

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

YPBCB PRCR

V

S

AV receiver

Video pin

cable

10

Getting Started

1

Open the battery compartment.

2

Insert the supplied two batteries type R06

or AA, following the indications (+ –)

inside the compartment.

3

Close the cover.

Using the remote control

Handling the remote control

• Do not spill water or other liquids on

the remote control.

• Do not drop the remote control.

• Do not leave or store the remote

control in the following types of

conditions:

– high humidity such as near a bath

– high temperature such as near a heater

or stove

– extremely low temperature

– dusty places

1

Connect the AC power cord to the power

outlet.

2

Turn on the TV and your AV receiver.

3

Select the appropriate input source at the

AV receiver that was used to connect to

this unit. Refer to the equipment owner’s

manual for details.

4

Turn this unit on.

5

Set the TV to the correct Video IN channel

(eg. EXT1, EXT2, AV1, AV2, AUDIO/

VIDEO, etc. Refer to your TV owner’s

manual for details).

➜

The front display lights up and the

default screen appears on the TV.

This DVD Player is compatible with both

NTSC and PAL. Select the color system

that matches your TV.

1

Press

SETUP

.

2

Press

2

repeatedly to select [VIDEO

SETUP PAGE].

3

Press

34

to highlight [TV TYPE], then

press

2

.

Step1: Inserting batteries

into the Remote Control

2

1

3

2

30

°

30°

Point the remote control

at the sensor, within

approximately 6 m

(20 feet) of the unit.

Remote control

sensor

Step2: Turning on the power

Step3: Selecting the color

system that corresponds to

your TV

VIDEO SETUP PAGE

TV TYPE PAL

TV DISPLAY NTSC

PROGRESSIVE MULTI

PICTURE SETTING

COMPONENT

11

English

Getting Started

4

Press

34

to highlight one of the options

below:

PAL

Select this if the connected TV is PAL

system. It will change the video signal of an

NTSC disc and output in PAL format.

NTSC

Select this if the connected TV is NTSC

system. It will change the video signal of a

PAL disc and output in NTSC format.

MULTI

Select this if the connected TV is

compatible with both NTSC and PAL

(multi-system). The output format will be

in accordance with the video signal of the

disc.

5

Select an item and press

ENTER/OK

.

Notes:

– Before changing the current TV Standard

setting, ensure that your TV supports the

‘selected TV Type’ system.

– If there is not a proper picture on your TV,

wait for 15 seconds for auto recover.

You can select your own preferred

language settings.This DVD Player will

automatically switch to the language for

you whenever you load a disc. If the

language selected is not available on the

disc, the disc’s default language will be used

instead. The OSD language in the system

menu will remain once selected.

Setting the OSD Language

1

Press SETUP.

2 Press 1 2 to select [GENERAL SETUP

PAGE].

3 Press 34 to highlight [OSD LANGUAGE],

then press 2.

4 Press 34 to select a language and press

ENTER/OK.

CHANGING PAL TO NTSC

1. ENSURE THAT YOUR TV SYSTEM SUPPORTS

NTSC STANDARD.

2. IF THERE IS A DISTORTED PICTURE

DISPLAYED ON THE TV, WAIT 15 SECONDS

FOR AUTO RECOVER.

CancelOK

Step4: Setting language

preference

GENERAL SETUP PAGE

DVD-AUDIO ENGLISH

DISC LOCK DANSK

DISPLAY DIM DEUTSCH

PROGRAM ESPAÑOL

OSD LANGUAGE FRANÇAIS

SCREEN SAVER ITALIANO

SLEEP NEDERLANDS

DIVX(R) VOD CODE NORSK

TIPS: To return to the previous menu, press 1.

To remove the menu, press SETUP.

12

Getting Started

Setting the Audio, Subtitle and

Disc menu language

1 Press STOP ( 9

) twice, then press

SETUP.

2 Press 2 repeatedly to select

[PREFERENCE PAGE].

3 Press 34 to highlight one of the options

below at a time, then press 2.

– ‘AUDIO’ (disc’s soundtrack)

– ‘SUBTITLE’ (disc’s subtitles)

– ‘DISC MENU’ (disc’s menu)

4 Press 34 to select a language and press

ENTER/OK.

If the language you want is not in the

list, then select [OTHERS],

then use the numeric buttons on the

remote to enter the 4-digit language code

(see page 33 “Language Codes”) and press

ENTER/OK.

5 Repeat steps 3–4 for other options

settings.

You can adjust the delay times (for center

and surround speakers only) and the

volume level for individual speakers. These

adjustments let you optimize the sound of

your system to best suit your surroundings

and setup.

IMPORTANT!

Speaker settings are only available

for multi-channel audio output.

1 Press SETUP.

2 Press 2 repeatedly to select [AUDIO

SETUP PAGE].

3 Press 34 to highlight [SPEAKER SETUP],

then press 2.

4 Enter a submenu by pressing 2.

5 Press 34 to highlight one of the options

below, then press 2.

PREFERENCE PAGE

AUDIO ENGLISH

SUBTITLE CHINESE (SIMP)

DISC MENU FRENCH

PARENTAL SPANISH

PBC PORTUGUESE

MP3/JPEG NAV POLISH

VR LIST ITALIAN

PASSWORD TURKISH

Step 5: Setting Speaker

Channels

TIPS: To return to the previous menu, press 1.

To remove the menu, press SETUP.

AUDIO SETUP PAGE

ANALOG OUTPUT

DIGITAL AUDIO

SPEAKER SETUP

CD UPSAMPLING

NIGHT MODE

FRONT SPEAKER LARGE

CENTER SPEAKER SMALL

SURROUND SP

SUBWOOFER

SPEAKERS VOLUME

SPEAKERS DELAY

SPEAKER SETUP PAGE

13

English

Getting Started

[FRONT SPEAKER, CENTER

SPEAKER, SURROUND SP]

OFF

(only for CENTER and SURROUND

speakers)

Select when no speakers are connected.

LARGE

Select if the connected speakers can

reproduce low frequency signals below

120 Hz.

SMALL

Select if the connected speakers cannot

reproduce low frequency signals below

120 Hz.

[SUBWOOFER]

ON

Select when a subwoofer is connected.

OFF

Select when no subwoofer is connected.

[SPEAKERS VOLUME]

Volume level setting for individual

speakers (–6 dB ~ +6 dB).

[SPEAKERS DELAY]

Delay time settings in relation to the

listening position/distance for center and

surround speakers (0 MS~15 MS).

6 Press 1 2 to adjust the setting that best

suits your surround sound needs.

7 Press ENTER/OK to confirm.

Notes:

– Use a longer delay time setting when the

surround speakers are closer to the listener

than the front speakers.

–A test tone will be automatically generated

to help you judge the sound level of each

speaker.

0dB

FRONT LEFT

FRONT RIGHT

CENTER

SUBWOOFER

SURROUND L

SURROUND R

SPEAKERS VOLUME SETUP

0 MS

SPEAKERS DELAY SETUP

CENTER

SURROUND L

SURROUND R

TIPS: To return to the previous menu, press 1.

To remove the menu, press SETUP.

14

Disc Operations

IMPORTANT!

– If the inhibit icon ( or X) appears

on the TV screen when a button is

pressed, it means the function is

not available on the current disc or

at the current time.

– Depending on the DVD or VIDEO

CD, some operations may be

different or restricted.

– Do not push on the disc tray or put

any objects other than disc on the

disc tray. Doing so may cause the

disc player malfunction.

1 Press STANDBY/ON on the front panel

to turn on the DVD player.

2 Press OPEN/CLOSE / on the front

panel to open disc loading tray.

3 Place the chosen disc in the tray, with the

label facing up.

4 Press OPEN/CLOSE / again to close

the tray.

➜ After recognizing this disc, the player

begins to play back automatically.

➜ If you press PLAY ( B

) when the tray

is open, this unit closes the tray and

starts playback.

Unless otherwise stated, all operations

described are based on Remote Control

use.

Pausing playback

1 During playback, press PAUSE ( ;

).

➜ Playback will pause and sound will be

muted.

2 Press PAUSE ( ;

) again to select the

next picture frame.

3 To resume normal playback, press

PLAY ( B

).

Selecting track/chapter

• Press S / T or use the numeric

buttons to key in a track/chapter

number.

➜ If repeat mode is active, pressing S /

T will replay the same track/chapter.

Searching backward/forward

• Press and hold S / T, then press

PLAY ( B

) to resume normal

playback.

➜ While searching, pressing S / T

again will decrease/increase the search

speed.

Stopping playback

• Press STOP ( 9

).

Basic Playback

General Operation

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

15

English

Disc Operations

Repeat

• While playing a disc, press REPEAT

continuously to choose a ‘Play Mode’.

DVD-V/DVD-A

➔ RPT ONE (repeat chapter)

➔ RPT TT/GRP (repeat title/group)

➔ RPT ALL (repeat disc)

➔ RPT OFF (repeat off)

VCD/SVCD/CD

➔ RPT ONE (repeat track)

➔ RPT ALL (repeat disc)

➔ RPT OFF (repeat off)

MP3/DivX/SA-CD

➔ RPT ONE (repeat track)

➔ RPT FLD (repeat folder)

➔ RPT OFF (repeat off)

Note:

– For VCD, repeat playback is not possible if

the PBC mode is switched on.

Repeating a section within a

chapter/track

1 While playing a disc, press A-B at your

chosen starting point.

2 Press A-B again at your chosen end point.

➜ The section A and B can be set only

within the same chapter/track.

➜ The section will now repeat

continuously.

3 To exit the sequence, press A-B.

Shuffle

This function shuffles the playing order of

chapters or tracks within a title/group/

album (if the title/group/album has more

than one chapter or track) in random

order.

1 Press SHUFFLE during playback.

➜ SHUFFLE appears on the screen for

about two seconds.

2 To return to normal playback, press

SHUFFLE again.

Note:

– For SA-CD, this function works in the

currently selected area only.

Using the Disc Menu

Depending on the disc, a menu may appear

on the TV screen once you load in the disc.

To select a playback feature or item

• Use 1 234 or numeric buttons on

the remote, then press ENTER/OK to

start playback.

To access or remove the menu

• Press MENU on the remote.

Selecting various repeat/shuffle

functions

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

Operations for video playback

(DVD/VCD/SVCD)

16

Disc Operations

Zooming in

This function allows you to enlarge the

picture on the TV screen and to pan

through the enlarged picture.

1 During playback, press ZOOM repeatedly

to display the picture with different scales.

➜ Use 1 234 to pan through the

enlarged picture.

➜ Playback will continue.

2 Press ZOOM repeatedly to return to the

original size.

Resuming playback from the last

stopped point

Resume playback of the last 10 discs is

possible, even if the disc was ejected or the

power switched off.

1 Load one of the last 10 discs.

➜ “LOADING” appears.

2 Press PLAY ( B

) while the

“LOADING” message is displayed.

➜ The disc will be played back from the

last point.

To cancel resume mode

• In stop mode, press STOP ( 9

) again.

On-Screen Display (OSD)

OSD menu shows the disc playback

information (for example, title or chapter

number, elapsed playing time, audio/

subtitle language), a number of operations

can be done without interrupting disc

playback.

1 During playback, press ON SCREEN.

➜ A list of available disc information

appears on the TV screen.

DVD

VCD/SVCD

2 Press 34 to view the information and

press ENTER/OK to access.

3 Use the numeric buttons to input the

number/time or press

34 to make the

selection, then press ENTER/OK to

confirm.

➜ Playback will change to the chosen time

or to the selected title/chapter/track.

Title/Chapter/Track selection (DVD/

VCD)

1 Press 34 to select [TITLE] or

[CHAPTER] (DVD) or [TRACK] (VCD).

2 Press ENTER/OK.

3 Select a title, chapter or track number

using the numeric buttons.

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

MENU

BITRATE

TITLE 02/14

CHAPTER 02/14

AUDIO 5.1CH

SUBTITLE ENG

MENU

BITRATE

TRACK 02/14

DISC TIME 0:49:17

TRACK TIME 0:03:43

REPEAT OFF

Sayfa yükleniyor ...

Yamaha DVD-S657 El kitabı

Yamaha DVD-S657 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler