Panasonic KXTS820FX Kullanma talimatları

Kategori
Telefonlar
Tip
Kullanma talimatları

Bu kılavuz için de uygundur

PNQX2346TA FM1206NF60517
Operating Instructions
Integrated Telephone System
Model No. KX-TS820FX
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
English
KX-TS820_Cover.fm 1 ページ 2017年5月10日 水曜日 午前11時11
2
Accessory information........................................................................... 3
For your safety ...................................................................................... 4
Important safety instructions ................................................................. 4
Specifications........................................................................................ 4
For best performance............................................................................ 5
Controls................................................................................................. 6
Connections .......................................................................................... 7
Setting up the unit before use ............................................................... 7
Making calls .......................................................................................... 8
Answering calls ..................................................................................... 8
Useful features during a call.................................................................. 9
Dial lock............................................................................................... 10
One-touch dialer.................................................................................. 11
Speed dialer........................................................................................ 13
Desk mount setup ............................................................................... 14
Wall mount setup................................................................................. 15
Troubleshooting................................................................................... 17
Index ................................................................................................... 18
Introduction
Preparation
Making/Answering Calls
One-Touch Dialer
Speed Dialer
Useful Information
Index
Table of Contents
KX-TS820FX.book Page 2 Thursday, January 13, 2011 4:16 PM
3
For your future reference
We recommend keeping a record of the following information to assist with any
repair under warranty.
Serial No. Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Note:
This equipment is designed for use on the Czech Republic and Slovakia analogue
telephone network.
In the event of problems, you should contact your equipment supplier in the first instance.
For use on other countries, please contact your equipment supplier.
Declaration of Conformity:
For information of Compliance with EU relevant Regulatory Directives,
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
http://www.ptc.panasonic.eu/doc
Accessory information
Supplied accessories
Attach your purchase receipt here.
No. Accessory item Quantity
1 Handset 1
2 Handset cord 1
3 Telephone line cord 1
1
23
Introduction
KX-TS820_Introduction.fm 3 ページ 2017年5月10日 水曜日 午前11時26分
Introduction
4
For your safety
To prevent severe injury and loss of
life/property, read this section
carefully before using the product to
ensure proper and safe operation of
your product.
WARNING
Installation
To prevent the risk of fire or electrical
shock, do not expose the product to rain
or any type of moisture.
Operating safeguards
Do not disassemble the product.
Do not spill liquids (detergents,
cleansers, etc.) onto the telephone line
cord plug, or allow it to become wet at
all. This may cause a fire. If the
telephone line cord plug becomes wet,
immediately pull it from the telephone
wall jack, and do not use.
CAUTION
Installation and location
Never install telephone wiring during an
electrical storm.
Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires
or terminals unless the telephone line
has been disconnected at the network
interface.
Use caution when installing or modifying
telephone lines.
This product is unable to make calls
when the dial lock feature is turned on
(only number stored in the emergency
button can be called).
Important safety
instructions
When using your product, basic safety
precautions should always be
followed to reduce the risk of fire,
electric shock, and injury to persons,
including the following:
1. Do not use this product near water, for
example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
3. Do not use the telephone to report a
gas leak in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
Specifications
Power source:
From telephone line
Dimensions (H x W x D):
Approx. 93 mm k 172 mm k 220 mm
Mass (Weight):
Approx. 426 g
Operating conditions:
0 °C–40 °C, 20 %j80 % relative air
humidity (dry)
Note:
Design and specifications are subject to
change without notice.
The illustrations in these instructions
may vary slightly from the actual product.
KX-TS820FX.book Page 4 Thursday, January 13, 2011 4:16 PM
Introduction
5
For best performance
Environment
The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
The product should not be exposed to
direct sunlight.
Do not place heavy objects on top of the
product.
The product should be kept away from
heat sources such as radiators, cookers,
etc. It should not be placed in rooms
where the temperature is less than 0°C
or greater than 40°C. Damp basements
should also be avoided.
Routine care
Wipe the outer surface of the product
with a soft moist cloth.
Do not use benzine, thinner, or any
abrasive powder.
Notice for product disposal,
transfer, or return
This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend
that you erase information such as
one-touch dial numbers from the
memory before you dispose of, transfer,
or return the product.
Information for Users on Collection
and Disposal of Old Equipment and
used Batteries
These symbols (
1
,
2
,
3
) on the
products, packaging, and/or
accompanying documents mean that
used electrical and electronic products
and batteries should not be mixed with
general household waste. For proper
treatment, recovery and recycling of
old products and used batteries,
please take them to applicable
collection points, in accordance with
your national legislation and the
Directives 2002/96/EC and 2006/66/
EC. By disposing of these products
and batteries correctly, you will help to
save valuable resources and prevent
any potential negative effects on
human health and the environment
which could otherwise arise from
inappropriate
waste handling.
For more information about collection
and recycling of old products and
batteries, please contact your local
municipality, your waste disposal
service or the point of sale where you
purchased the items.
Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact
your dealer or supplier for further
information.
Information on Disposal in other
Countries outside the European
Union
These symbols (1, 2, 3) are only
valid in the European Union. If you
wish to discard these items, please
contact your local authorities or dealer
and ask for the correct method of
disposal.
Note for the battery symbol
This symbol (2) might be used in
combination with a chemical symbol
(3). In this case it complies with the
requirement set by the Directive for
the chemical involved.
123
Cd
KX-TS820FX.book Page 5 Thursday, January 13, 2011 4:16 PM
6
Controls
FLASH
REDIAL
EMERGENCY
AUTO/LOWER
PRO
G
RAM
DIAL LOCK
E
FG H
AC DB
KM
PA
USE
A
B
C
D
E
F
JKL
G
H
I
M
N
O
T
U
V
P
Q
R
S
W
X
Y
Z
TO
NE
1
2
3
4
5
6
7
8
9
0
L
VOL.
I J
1 {PDIAL LOCK} (page 10)
2 {PROGRAM} (page 9, 10, 11,
13)
3
{
AUTO/LOWER
}
(page 11, 13)
4
RINGER indicator
(page 8)
5
{£}
(TONE) (page 9)
6
{PAU SE }
(page 8)
7
{FLASH} (page 9)
8
{REDIAL} (page 8, 9, 10)
9
VOL. (Volume) {4}{3}
(page 8)
:
{EMERGENCY}
(page 10, 11)
; One-touch dial buttons
(page 11)
< Dial key buttons/
Memory station numbers
(page 13)
= RINGER selector (page 8)
Preparation
KX-TS820FX.book Page 6 Thursday, January 13, 2011 4:16 PM
7
Preparation
Connections
Connect the handset cord (1) to the handset and the unit. Connect the
telephone line cord until it clicks into the unit and telephone line jack (2).
After line connection, lift the handset to check for a dial tone.
Use only a Panasonic handset for KX-TS820FX.
Use only the supplied telephone line cord. Using another telephone line cord may not
allow the unit to work properly.
* For DSL/ADSL service users
Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line
between the unit and the telephone line jack in the event of the following:
s noise is heard during conversations.
Setting up the unit before use
Dialing mode
If you cannot make calls, change this setting according to your telephone line
service.
The default setting is TONE.
TONE: For tone dial service.
PULSE: For rotary/pulse dial service.
1 Lift the handset.
2
{
PROGRAM
}
>
{
REDIAL
}
>
{
3
}
3 To select TONE, press {1}.
OR
To select PULSE, press {2}.
4 {PROGRAM}
A long beep sounds.
5 When finished, hang up.
LINE
1
2
DSL /ADSL filter *
To single-line telephone jack
KX-TS820FX.book Page 7 Thursday, January 13, 2011 4:16 PM
8
Making calls
1 Lift the handset and dial the
phone number.
2 When you finish talking, place the
handset on the cradle.
Adjusting the handset volume
(4 levels)
Press VOL.{3} or VOL.{4}
repeatedly while talking.
After hanging up, the volume level will be
saved.
To redial the last number dialed
(32 digits max.)
1 Lift the handset > {REDIAL}
Redial will dial the last number you
dialed manually.
Pause (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service.
Example: If you need to dial the line
access number “9” when making
outside calls with a PBX:
1 Lift the handset to start calling.
2 {9} > {PAU SE }
3 Dial the phone number.
Note:
A 3.5 second pause is inserted each
time {PAU S E} is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the unit
rings and the ringer indicator flashes
quickly. You can answer the call by
simply lifting the handset.
Note:
The ringer indicator will flash when
s a telephone number is dialed using
another phone which is in PULSE
mode and connected to the same
phone line, or
s someone picks up or hangs up
another phone connected to the same
phone line.
This is normal.
Adjusting the unit ringer volume
You can select the ringer volume to
HIGH, LOW or OFF. The default
setting is HIGH.
OFF HIGH
LOW
RINGER
Making/Answering Calls
KX-TS820FX.book Page 8 Thursday, January 13, 2011 4:16 PM
Making/Answering Calls
9
Useful features during
a call
Flash
{FLASH} allows you to use the
special features of your host PBX
such as transferring an extension call,
or accessing optional telephone
services.
Flash time
The flash time depends on your
telephone exchange or host PBX.
You can select:
80ms (milliseconds), 90ms, 100ms,
110ms, 160ms, 200ms, 250ms,
300ms, 400ms, 600ms, 700ms, or
900ms.
The default setting is 100ms.
1 Lift the handset.
2
{
PROGRAM
}
>
{
REDIAL
}
>
{
2
}
3 Press {0} to {9}, {£}, or {#} to
select the desired setting.
4 {PROGRAM}
A long beep sounds.
5 When finished, hang up.
For call waiting service
users
To use call waiting, you must first
subscribe to the call waiting service of
your service provider/telephone
company. This feature allows you to
receive calls while you are already
talking on the phone. If you receive a
call while on the phone, you will hear
a call waiting tone.
1 Press {FLASH} to answer the
2nd call.
2 To switch between calls, press
{FLASH}.
Note:
Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing
(for rotary/pulse service
users)
You can temporarily switch the dialing
mode to tone when you need to
access touch-tone services
(for example, answering services,
telephone banking services, etc.).
Press {£} (TONE) before entering
access numbers which require tone
dialing.
{1}: 80ms {2}: 90ms {3}: 100ms
{4}: 110ms {5}: 160ms {6}: 200ms
{7}: 250ms {8}: 300ms {9}: 400ms
{£}: 600ms {0}: 700ms {#}: 900ms
KX-TS820FX.book Page 9 Thursday, January 13, 2011 4:16 PM
Making/Answering Calls
10
Dial lock
This feature prohibits making outside
calls.
The default setting is OFF.
Important:
When dial lock is turned on, only
phone number stored in the memory
of the {EMERGENCY} can be dialed
(only 1 one-touch dial).
When dial lock is turned on, you can still
adjust the handset volume and answer
the second call by pressing {FLASH}.
When dial lock is turned on, you cannot
store or erase the {EMERGENCY}.
To turn the dial lock on/off
1 Lift the handset.
2 {PDIAL LOCK}
3 Enter the unit password
(default: 1111) > {PDIAL LOCK}
A long beep sounds.
4 When finished, hang up.
Note:
If dial lock is turned on, pressing the dial
button will cause an error beep to sound.
Changing the unit password
Important:
If you change the password, please
make note of your new password. The
unit will not reveal the password to you.
If you forget your password, consult your
nearest Panasonic service center.
1 Lift the handset.
2
{
PROGRAM
}
>
{
REDIAL
}
>
{
5
}
3 Enter the current 4-digit password
(default: 1111) > {PROGRAM}
A beep sounds.
If you have entered the wrong
password, error beep will sound.
Enter the correct password >
{PROGRAM}.
4 Enter the new 4-digit password
(0 to 9) > {PROGRAM}
A long beep sounds.
5 When finished, hang up.
KX-TS820FX.book Page 10 Thursday, January 13, 2011 4:16 PM
11
One-touch dialer
You can store up to 20 phone
numbers in the one-touch dial buttons
(10 numbers in UPPER memory
locations and 10 numbers in LOWER
memory locations). Do not press any
one-touch dial buttons before storing
to prevent misoperation.
UPPER memory locations
Storing phone numbers
1 Lift the handset > {PROGRAM}
2 Enter a phone number up to
32 digits.
If a pause is required for dialing,
press {PAUSE }. A pause stored in a
phone number counts as one digit.
If a wrong number is entered, hang
up and repeat step 1.
3 Press a one-touch dial button.
A long beep sounds.
4 When finished, hang up.
Note:
We recommend you program an
emergency number in the
{EMERGENCY}.
Emergency number is number stored in
the {EMERGENCY} that can be dialed
even when dial lock is turned on
(page 10).
Erasing a stored number
1 {PROGRAM}
2 Press the one-touch dial button.
A long beep sounds.
Dialing a stored number
1 Lift the handset.
2 Press the one-touch dial button.
3 When you finish talking, place the
handset on the cradle.
LOWER memory locations
Storing phone numbers
1 Lift the handset > {PROGRAM}
2 Enter a phone number up to
32 digits.
If a pause is required for dialing,
press {PAU SE}. A pause stored in a
phone number counts as one digit.
If a wrong number is entered, hang
up and repeat step 1.
3 {AUTO/LOWER} > Press a
one-touch dial button.
A long beep sounds.
4 When finished, hang up.
Erasing a stored number
1 {PROGRAM}
2 {AUTO/LOWER} > Press the
one-touch dial button.
A long beep sounds.
Dialing a stored number
1 Lift the handset.
2 Press {AUTO/LOWER}
3 Press the one-touch dial button.
4 When you finish talking, place the
handset on the cradle.
One-Touch Dialer
KX-TS820FX.book Page 11 Thursday, January 13, 2011 4:16 PM
One-Touch Dialer
12
Index card
Use the index card to record the
names/phone numbers stored to the
one-touch dial buttons.
Cover
Index
Card
KX-TS820FX.book Page 12 Thursday, January 13, 2011 4:16 PM
13
Speed dialer
You can store up to 10 numbers in the
memory stations. The dialing buttons
{0} to {9} function as memory station
numbers. Do not press any memory
stations before storing to prevent
misoperation.
Storing phone numbers
1 Lift the handset > {PROGRAM}
2 Enter a phone number up to
32 digits.
If a pause is required for dialing,
press {PAUSE }. A pause stored in a
phone number counts as one digit.
If a wrong number is entered, hang
up and repeat step 1.
3 {AUTO/LOWER}
>
Press a
memory station number (
{
0
}
to
{
9
}
).
A long beep sounds.
4 When finished, hang up.
Note:
If a phone number is stored in a dial key
which already contains a phone number,
the old number is erased.
We recommend you make a note of
which phone numbers are stored in
which dial keys.
Erasing a stored number
1 Lift the handset.
2 {PROGRAM} > {AUTO/
LOWER}
3 Press a memory station number
({0} to {9}) for the phone number
to be erased.
A long beep sounds.
4 When finished, hang up.
Dialing a stored number
1 Lift the handset.
2 {AUTO/LOWER}
>
Press the
memory station number (
{
0
}
to
{
9
}
).
3 When you finish talking, place the
handset on the cradle.
Speed Dialer
KX-TS820FX.book Page 13 Thursday, January 13, 2011 4:16 PM
14
Desk mount setup
This unit can be used in 2 positions.
Low desk position (default)
High desk position
s You can adjust the wall mount adaptor to slope this unit.
s Changing to the high desk position.
1. Press the tab in the direction of the arrow
(1), then remove the wall mount adaptor
(2).
2. To attach the wall mount adaptor to high
( ), push it in the direction of arrows
((1) and (2)) as shown.
B
A
A
AA
B
A
A
B
B
AA
BB
Useful Information
KX-TS820FX.book Page 14 Thursday, January 13, 2011 4:16 PM
15
Useful Information
Wall mount setup
This unit can be mounted on a wall phone plate.
1 Pull down the handset hook
until it locks, so the tabs holds
the handset.
2 Press the tabs in the direction of the arrows (1), then remove the wall mount
adaptor (
2).
3 Tuck the telephone line cord
inside the wall mount adaptor,
and push it in the direction of
the arrow.
AA
AA
Hi
g
h desk
p
osition
Low desk position
KX-TS820FX.book Page 15 Thursday, January 13, 2011 4:16 PM
16
Useful Information
4 Drive screws (not
included) into the wall
using the wall
template below.
Connect the
telephone line cord.
Mount the unit, and
then slide it down.
To temporarily set the handset down during a
conversation, place it as shown in this picture.
Wall Template
Screws
8.3 cm
To single-line
telephone jack
Hooks
8.3 cm
KX-TS820FX.book Page 16 Thursday, January 13, 2011 4:16 PM
17
Useful Information
Troubleshooting
Liquid damage
Caution:
To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
Problem Cause/solution
The unit does not work.
Check the connections (page 7).
The unit does not ring.
The RINGER selector is set to OFF. Set to HIGH or
LOW (page 8).
You cannot dial.
Check the dial tone. If there is no dial tone, check
the connections (page 7).
The dialing mode may be set incorrectly. Change
the settings (page 7).
Dial lock is turned on. To turn it off, see page 10.
{PROGRAM} or {PDIAL LOCK} may have been
pressed. Hang up the handset and try again.
You cannot store a phone
number in memory.
Confirm the handset is off the cradle.
Do not enter a phone number more than 32 digits
long, or the entered number and the previously
stored number will be cleared.
When using the dial lock (page 10), you cannot
store emergency number in the {EMERGENCY}.
You cannot redial by
pressing {REDIAL}.
If the last number dialed was more than 32 digits
long, the number will not be redialed correctly.
How to exit the program
setting?
Place the handset on the cradle.
Problem Cause/solution
Liquid or other form of
moisture has entered the
unit.
Disconnect the telephone line cord from the unit.
Leave the unit to dry for at least 3 days. After the
unit is completely dry, reconnect the telephone line
cord.
KX-TS820FX.book Page 17 Thursday, January 13, 2011 4:16 PM
18
Index
A Accessories: 3
Answering calls: 8
C Call waiting: 9
Connections: 7
Controls: 6
D Dial lock: 10
Dialing mode: 7
F Flash: 9
L LOWER memory: 11
M Making calls: 8
O One-touch dialer: 11
P Password: 10
Pause: 8
R Redial: 8
Rotary/pulse service: 9
S Speed dialer: 13
T Temporary tone dialing: 9
Troubleshooting: 17
U UPPER memory: 11
V Volume
Handset: 8
Ringer: 8
W Wall mount setup: 15
Index
KX-TS820FX.book Page 18 Thursday, January 13, 2011 4:16 PM
19
KX-TS820_Useful.fm 19 ページ 2017年5月17日 水曜日 午後12時33分
20
KX-TS820_Useful.fm 20 ページ 2017年5月17日 水曜日 午後12時33分
1 / 1

Panasonic KXTS820FX Kullanma talimatları

Kategori
Telefonlar
Tip
Kullanma talimatları
Bu kılavuz için de uygundur