Yamaha RX-V2067 El kitabı

Kategori
AV alıcıları
Tip
El kitabı
Owner’s Manual
AV Receiver English for Europe
En 2
BEFORE USE
About this manual
Supplied accessories
Check that you received all of the following parts.
Remote control
Simplified remote control
Batteries (AAA, R03, UM-4) x 4
Power cable
YPAO microphone
AM loop antenna
Indoor FM antenna
Language selection
This procedure allows you to select the language of
menus and messages on the TV screen.
1
Press hON SCREEN to display the ON
SCREEN menu.
2
Press iCursor B / C to select “Setup” and
press iENTER.
3
Press iCursor D / E to select the
“Language” and press iENTER.
4
Press iCursor B / C to select the favorite
language from the following options.
5
Press hON SCREEN to close the ON
SCREEN menu.
ON SCREEN
ENTER
SOU
R
C
E
R
ECEIVE
R
AV
AU
DI
O
4
3
1
2
7
5
6
-A
4
3
1
2
US
B
MU
LTI
N
ET
P
H
O
N
O
TUNER
D
OC
K
[
B
]
[
A
]
h
i
Some features are not available in certain regions.
This manual is created prior to production. Design and
specifications are subject to change in part as a result
of improvements, etc. In case of differences between
the manual and product, the product has priority.
hON SCREEN” (example) indicates the name of
the parts on the remote control. Refer to the “Remote
control” (
p. 12) for the information about each
position of the parts.
J
1 indicates that the reference is in the footnote.
Refer to the corresponding numbers on the bottom of
the page.
indicates the page describing the related
information.
Click on the “ ” at the bottom of the page to
display the corresponding page in “Part names and
functions.
Front panel
Rear panel
Front panel display
Remote control
English (English), (Japanese),
(French), (German), (Spanish),
(Russian)
En 3
CONTENTS
INTRODUCTION
Features and capabilities...................................................5
Using the TV OSD to operate the unit .............................6
Basic OSD menu operations.............................................6
Viewing or modifying content for the current input source
<Content window> ...........................................................6
Configuring settings for this unit
<ON SCREEN menu>......................................................6
Adjust settings for each input source <Option menu>.....7
Part names and functions..................................................8
Front panel........................................................................8
Front panel with the cover opened ...................................9
Rear panel.......................................................................10
Front panel display .........................................................11
Remote control ...............................................................12
Remote control with the cover open...............................13
On-screen display ...........................................................14
CONNECTIONS
Connecting speakers........................................................15
Speaker channels and functions......................................15
Speaker layout ................................................................16
Connecting speakers and subwoofers.............................20
Advanced speaker configuration ....................................23
Speaker layout utilizing an external power amplifier.....23
Connecting an external amplifier ...................................25
Connecting external components....................................26
Jacks and cables..............................................................26
Connecting a TV monitor...............................................27
Connecting BD/DVD players and other devices............30
Connecting game consoles or video camcorders............35
Connecting a multi-format player
or an external decoder ....................................................35
Connecting a SCENE link
playback-compatible device ...........................................36
Using the Trigger function to link
external component power..............................................36
Connecting audio/video recording devices .................... 37
Connecting to the network ............................................. 37
Connecting a USB storage device.................................. 38
Connecting the FM/AM antennas.................................. 39
Setting up the speaker parameters automatically
(YPAO).............................................................................. 40
PLAYBACK
Basic playback procedure ............................................... 47
Changing input settings with a single key
(SCENE function)............................................................ 49
Selecting a SCENE suited to an external component .... 49
Enjoying favorite sound field effect ............................... 50
Selecting sound programs and sound decoders.............. 50
Enjoying surround sound
with the CINEMA DSP function ................................... 50
Enjoying unprocessed playback
(Straight decoding mode)............................................... 51
Enjoying Hi-Fi Sound Quality (Pure Direct Mode) ....... 52
Enjoying stereo playback ............................................... 52
Enjoying compressed music source with better sound
quality (Compressed Music Enhancer) .......................... 52
Sound programs.............................................................. 53
Using the TV display to control this unit....................... 55
Basic operations via the TV screen display ................... 55
Configuring settings specific to an individual input
source (Option menu)...................................................... 57
Option menu display and setup ...................................... 57
Option menu................................................................... 58
Confirming and operating input sources
from the content window................................................. 61
Displaying the content window on the TV screen ......... 61
Switching the display between the Now Playing view
and the Browse view ...................................................... 61
FM/AM tuning................................................................. 62
Selecting a frequency for reception (Normal tuning) .... 62
Radio Data System tuning ............................................. 63
Navigating the FM/AM tuner
from the content window ............................................... 65
Playing back tunes on the PC......................................... 67
Windows Media Player setup......................................... 67
Playback of PC music contents...................................... 67
Playing back tunes on the USB storage devices............ 69
Playback of the USB storage device.............................. 69
Listening to the Internet Radio ...................................... 71
Listening to Internet Radio ............................................ 71
Using shortcut function................................................... 73
Playing back tunes from your iPod™/iPhone™........... 74
Connecting the Universal Dock for iPod ....................... 74
Controlling an iPod™/iPhone™ .................................... 74
Playing iPod™/iPhone™ from the menu screen
(Menu browse control)................................................... 75
Operating basic playback functions
via the remote control (Simple remote control)............. 76
Playing iPod™/iPhone™ with wireless connection ...... 76
Playing back tunes from Bluetooth™ components ...... 78
Connecting a Yamaha Bluetooth
Wireless Audio Receiver................................................ 78
Pairing Bluetooth™ components................................... 78
Using Bluetooth™ components..................................... 79
Controlling this unit by using the web browser
(Web Control Center)...................................................... 80
Displaying and operating Web Control Center .............. 80
En 4
SETUP
Configuring input sources (Input menu) .......................82
Configuring input sources ..............................................82
Input menu......................................................................83
Editing the SCENE function (Scene menu)...................85
Editing a scene................................................................ 85
Scene menu.....................................................................86
Simple registering as the SCENE...................................87
Setting sound program parameters
(Sound Program menu) ...................................................88
Editing sound programs..................................................88
CINEMA DSP parameters ............................................. 89
Parameters usable in certain sound programs ................91
Parameters usable in surround decoder .......................... 92
Setting various functions (Setup menu) .........................93
Operating the Setup menu ..............................................93
Setup menu .....................................................................94
Manages settings for speakers ........................................94
Setting the audio output function of this unit .................98
Setting this unit’s video output function....................... 100
Setting HDMI functions ...............................................101
Adjusting this unit’s network parameters.....................104
Setting this unit’s multi-zone function .........................105
Making the receiver easier to use ................................. 106
Language ......................................................................109
Confirming information of this unit
(Information menu) .......................................................110
Selecting information ...................................................110
Controlling the remote control
to operate various functions.......................................... 112
Keys connecting external components ......................... 112
Customizing the remote control ................................... 113
Setting remote control codes........................................ 113
Programming from other remote controls .................... 115
Changing source names in the display window ........... 117
Macro programming features ....................................... 118
Clearing configurations ................................................ 119
Simplified remote control............................................. 121
Extended functionality that can be configured
as needed (Advanced Setup menu)............................... 122
Displaying/Setting the Advanced Setup menu............. 122
Setting the impedance of speakers .............................. 122
Remote sensor .............................................................. 123
Avoiding crossing remote control signals
when using multiple Yamaha receivers ........................ 123
Changing TV format .................................................... 124
Removing HDMI video output up-scaling limits......... 124
Recovery and backup of the system settings................ 124
Initializing various settings for this unit....................... 124
Firmware update........................................................... 125
Firmware version.......................................................... 125
Using the HDMI Control function ............................... 126
Enjoying the contents in another room ....................... 130
Connecting Zone2 or Zone3......................................... 130
Controlling Zone2 or Zone3......................................... 132
Enjoying the music in all rooms................................... 132
APPENDIX
Troubleshooting ............................................................. 133
General......................................................................... 133
HDMI™ ....................................................................... 135
Tuner (FM/AM) ........................................................... 136
USB and Network ........................................................ 137
iPod™/iPhone™ .......................................................... 138
Bluetooth™.................................................................. 139
Remote control............................................................. 139
Glossary.......................................................................... 140
Audio information........................................................ 140
Sound program information ......................................... 141
Video information ........................................................ 142
Compatibility of the input and output video signals .... 142
Information on HDMI™............................................... 143
About trademarks ......................................................... 144
Specifications.................................................................. 145
Index ............................................................................... 147
En 5
INTRODUCTION
Built-in high-quality, high-power 7-channel amplifier
Multi-channel speaker configuration capability
2- to 7.1-channel speaker configurations .................................................................................................16
Presence speaker connections for playback with a richer sound field effect...........................................15
Bi-amplification connections for high-quality playback .........................................................................21
External amplifier connections for high-quality playback and expansion of channels ...........................23
Speaker impedance configuration............................................................................................................21
HDMI compatibility
8 HDMI input jacks (7 on the rear, 1 on the front) supporting 3D video signal input ............................30
2 selectable HDMI output jacks supporting Audio Return Channel and 3D video signal ......................28
Automatic setup for speaker acoustic parameters
(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................40
Extensive inputs (max. 13) for external playback components
BD/DVD/CD player connection ..............................................................................................................30
Game console / video camcorder connection ..........................................................................................35
Multi-format player / external decoder connection .................................................................................35
iPod/iPhone wired connection .................................................................................................................74
iPod/iPhone wireless connection .............................................................................................................76
Bluetooth component connection ............................................................................................................78
1-button input/sound program/setting switching (SCENE function)...................49
Built-in sound programs and surround decoders for playback variety of sources
Spatial sound playback with sound field effects (CINEMA DSP) ..........................................................50
Playback with no sound field effects (straight decoding) ........................................................................51
High-fidelity sound playback (Pure Direct).............................................................................................52
Enhanced sound playback for compressed sources (Compressed Music Enhancer)...............................52
Tuner playback
FM/AM broadcast....................................................................................................................................62
Radio Data System tuning .......................................................................................................................63
Playback and control via network
Playback of music on the PC and DLNA server......................................................................................67
Internet radio service playback ................................................................................................................71
Control this unit via network (Web Browser Control).............................................................................80
Playback of music on the USB storage devices ................................................... 69
Sophisticated on-screen display (OSD) for easy operation
Selection of input sources, scenes, and sound programs .........................................................................55
Navigation for the current input source (content window)......................................................................61
Setup for this unit (ON SCREEN menu) .................................................................................................82
Setup for each input source (Option menu) .............................................................................................57
Customizable remote control
Remote control code setup for operation of external components ........................................................113
Learning function from other remote controls.......................................................................................115
Programming macro for a series of operations......................................................................................118
Multi-room listening capability (Zone2/Zone3) ................................................... 130
Features and capabilities
Most of functions can be operated with on-screen display on the TV screen. Refer to “Using the TV
OSD to operate the unit” on the following pages for information on functions that can be controlled
using the on-screen display.
INTRODUCTION
En 6
This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and
Option menus, as well as the content window that displays the content of current input sources.
Basic OSD menu operations
Select an input source, scene and sound program
Select an input source ..............................................................................................................................55
Select a scene ...........................................................................................................................................55
Select a sound program............................................................................................................................56
Select a language
Change the language displayed on the TV screen <Language>............................................................109
Viewing or modifying content for the current input source
<Content window>
Operate the FM/AM tuner
Display preset stations for selection ........................................................................................................65
Display information on the station currently received.............................................................................65
Perform operations such as searching for and registering stations using the screen button ....................65
Operate the Internet radio
Display information on the station currently received.............................................................................71
Play back radio contents ..........................................................................................................................71
Bookmark Internet radio stations.............................................................................................................71
Operate the iPod music sources
Display the list of iPod music sources for selection ................................................................................75
Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............75
Configuring settings for this unit <ON SCREEN menu>
Configure an input source
Change the input source name <Rename/Icon Select> ...........................................................................83
Specify a format for digital audio signals <Decoder Mode> ..................................................................84
Enhance the sound of compressed audio <Enhancer> ............................................................................84
Output a video signal input from another input source
while playing a multi-channel audio signal <Video Out> .......................................................................84
Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................84
Play music sources on a PC using external controls <DMC Control>....................................................84
Customize a scene
Register or clear settings for a selected scene <Save>, <Load>, <Reset> ........................................86, 87
Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically
when a scene is selected <SCENE IR> ...................................................................................................86
Changing a scene name and icon <Rename/Icon Select> .......................................................................87
Adjust a sound program (sound program)
Adjust sound program parameters ...........................................................................................................88
Display settings information for this unit
Display audio signal information <Audio Signal>................................................................................110
Display video signal information <Video Signal> ................................................................................110
Display HDMI signal information <HDMI Monitor>...........................................................................110
Display network information <Network>..............................................................................................111
Display system information <System>..................................................................................................111
Display Zone information <Zone> ........................................................................................................111
Using the TV OSD to operate the unit
Continues to the
next page
INTRODUCTION
Using the TV OSD to operate the unit
En 7
Adjust acoustic parameters to match your speakers and listening environment
Specify speaker acoustic parameters automatically
(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................40
Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................95
Specify settings for each speaker <Configuration> .................................................................................95
Control volume control for each speaker <Level> ..................................................................................97
Apply speaker distance settings <Distance> ...........................................................................................97
Control equalizer sound quality <Parametric EQ>..................................................................................97
Adjust test tone speaker <Test Tone> ......................................................................................................98
Adjust audio signals output from this unit
Correct lag between audio and video signals <Lipsync> ........................................................................98
Select a dynamic range adjustment method <Dynamic Range> .............................................................99
Specify the maximum volume <Max Volume> .......................................................................................99
Specify the initial volume <Initial Volume>............................................................................................99
Restrict video signal in Pure Direct Mode <Pure Direct Mode>.............................................................99
Adjust DSP effect and volume level <Adaptive DSP Level> ..................................................................99
Adjust video signals output from this unit
Convert analog video signal to another type of signal <Analog to Analog Conversion> .....................100
Specify the resolution and aspect ratio of video signals and adjust video quality <Processing>..........100
HDMI settings
Assign the audio input source for the TV <TV Audio Input>...............................................................102
Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>............................102
Transmit HDMI audio/video to the TV during standby mode <Standby Through> .............................103
Change the output destination of HDMI input audio signals <Audio Output>.....................................103
Network settings
Specify this unit’s IP address <IP Address> ..........................................................................................104
Accept the commands over a LAN network when this unit is in the standby mode
<Network Standby> ...............................................................................................................................104
Specify the mac address filter for this unit <MAC Address Filter> ......................................................104
Enable listening in multiple rooms (multi-zone function)
Adjust Zone2/Zone3 volume <Zone2 Set/Zone3 Set> ..........................................................................105
Display the Zone2/Zone3 menu on the TV <Monitor Out Assign>......................................................105
Rename zones or scenes <Zone2 Scene Rename/Zone3 Scene Rename/Zone Rename>.....................106
Specify other functions for this unit
Enter standby mode automatically when no operations are performed <Auto Power Down> .............107
Assign jacks to the selected input source <Input Assignment> ............................................................107
Adjust the brightness of the front panel display <Dimmer> .................................................................108
Change the wall paper displayed on the TV screen <Wall Paper>........................................................108
Specify the function of the TRIGGER OUT jack for controlling external components
<Trigger Output1/Trigger Output2> ......................................................................................................108
Prohibit changes to settings <Memory Guard> .....................................................................................109
Adjust settings for each input source <Option menu>
Adjust bass and treble levels <Tone Control> .........................................................................................59
Enable low-volume background music <Adaptive DRC> ......................................................................59
Enjoying more spatial sound fields <CINEMA DSP 3D Mode>............................................................59
Adjust the vertical position of dialogues <Dialogue Lift> ......................................................................59
Select the 5.1-channel signal playback method <Extended Surround> ..................................................59
Adjust the volume of input sources <Volume Trim>...............................................................................60
Selecting a video adjustment preset <Video Adjustment> ......................................................................60
Selecting audio input jacks <Audio Select>............................................................................................60
Automatically search for and receive a traffic station <Traffic Program> ..............................................60
Shuffle or repeat playback <Shuffle/Repeat>..........................................................................................60
Connect / Disconnect Bluetooth component to this unit <Connect/Disconnect> ...................................60
Pairing Bluetooth component with this unit <Pairing> ...........................................................................60
INTRODUCTION
En 8
Front panel
a MAIN ZONE A (Power)
Switches this unit between on and standby mode.
b HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby mode.
When the Standby Through function is enabled and audio/video from
an external component connected with HDMI is output to a TV
during standby mode (
p. 103).
When an iPod/iPhone, which is placed in the Universal Dock for iPod,
is charging while the unit is in standby mode (
p. 84).
This indicator also lights up when the Yamaha Wireless System for
iPod is connected to this unit (
p. 76).
c Front panel display
Displays information on this unit (
p. 11).
d PURE DIRECT
Switches this unit to Pure Direct Mode (
p. 52).
e INPUT selector
Selects an input source from which to playback. Rotate this selector to
cycle through the input sources in order.
f VOLUME
Adjusts the volume level.
Part names and functions
Opening and closing the front panel door
To use controls or jacks behind the front panel door, gently press
the bottom of the door to open it. Keep the door closed when not
using controls or jacks behind the front panel door.
Continues to the
next page
a
e f
c db
INTRODUCTION
Part names and functions
En 9
Front panel with the cover opened
g ON SCREEN
Turns on and off the ON SCREEN menu.
h OPTION
Turns on and off the Option menu (
p. 57).
i TONE/BALANCE
Adjusts high-frequency/low-frequency output of speakers/headphones
in each zone (
p. 48, p. 132).
Adjusts the balance of the volume of the left and right channels in
Zone2 or Zone3 (
p. 132).
j STRAIGHT
Changes a sound program to straight decoding mode (
p. 51).
k PROGRAM l / h
Selects a sound program (
p. 50). Press the left or right key repeatedly
to cycle through sound programs.
l SCENE
Switches the input source, the sound program, and the HDMI OUT with
a single button (
p. 49, p. 85). When this unit is in standby mode,
press this key to switch on.
m MULTI ZONE
ZONE2
Switches to enable/disable the audio and video output to Zone2
(
p. 105, p. 130).
ZONE3
Switches to enable/disable the audio and video output to Zone3
(
p. 105, p. 131).
ZONE CONTROLS
Switches to Zone2 or Zone3 operation mode. This unit, or its remote
control, can be used to select input sources or adjust volume for an
external amplifier in another room or the built-in amplifier for speakers
in another room (
p. 132).
n INFO
Changes the information displayed on the front panel display (
p. 11).
o MEMORY
Registers FM/AM stations as preset stations (
p. 62). J1
p FM/AM
Sets the FM/AM tuner band to FM or AM (
p. 62). J1
q PRESET j / i
Selects an FM/AM preset station (
p. 63). J 1
r Cursor B / C / D / E, ENTER, RETURN
s USB port
For connecting a USB memory device or portable USB audio player (
p. 38).
t DISPLAY
Switches the display between the Now Playing view and the Browse
view.
u YPAO MIC jack
Connect the supplied YPAO microphone and adjust the speaker balance
automatically (
p. 40).
v PHONES jack
For plugging headphones in. Sound effects applied during playback can
also be heard through the headphones.
w VIDEO AUX jacks
For connecting game consoles to this unit temporarily (
p. 35).
x TUNING/CH jj / ii
Changes FM/AM tuner frequencies (
p. 62). J1
Cursor B / C / D / E Select menu items and change settings when
menus, etc., are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when menus are
displayed, or close the menu.
n
r
xt w
k
mg li o qnjh p
vus
JM
1 : Usable when you have selected TUNER input.
INTRODUCTION
Part names and functions
En 10
Rear panel
a PHONO jacks
For connecting a turntable (
p. 34).
b DOCK jack
For connecting an optional Universal Dock for iPod (such as YDS-
12), Wireless System for iPod (YID-W10), or Bluetooth Wireless
Audio Receiver (YBA-10) (
p. 74, p. 76, p. 78).
c NETWORK port
For connecting to a network (
p. 37).
d HDMI OUT 1-2 jacks
For connecting an HDMI - compatible TV to output audio/video
signals (
p. 28).
e MON.OUT/ZONE OUT jacks (S-VIDEO/VIDEO jacks)
For connecting a TV capable of receiving video input, and outputting
video signals to it (
p. 28, p. 29).
f COMPONENT VIDEO jacks
For connecting external components that support component video
output for video signal reception (
p. 31).
g HDMI input jacks
For connecting external components equipped with HDMI-
compatible outputs to receive audio/video signals (
p. 30).
h MONITOR OUT/ZONE OUT jacks (COMPONENT VIDEO
jacks)
For connecting TV that are compatible with component video signals,
using three cables to output video signal (
p. 28).
i REMOTE IN/OUT1-2 jacks
For connecting an external component that supports the remote
control function (
p. 36).
j TRIGGER OUT 1-2 jack
For connecting an external component that supports the trigger
function to operate it linked with operation of this unit (
p. 36).
k RS-232C terminal
This is a control expansion terminal for custom installation. Consult
your dealer for details.
l AV1-4 jacks
For connecting to external components equipped with audio/video
outputs to receive audio/video signals (
p. 31).
m ANTENNA jacks
For connecting AM and FM antennas (
p. 39).
n AV OUT jacks
For outputting audio/video signals received when analog inputs are
selected (
p. 37).
o AUDIO1-4 jacks
For connecting external components equipped with audio outputs to
receive audio signals (
p. 34).
p MULTI CH INPUT jacks
For connecting a player that supports a multi-channel output
(
p. 35).
q ZONE OUT jacks
Outputs sound of this unit to an external amplifier set in a different
room. (
p. 130).
r PRE OUT terminals
For connecting a subwoofer with built-in amplifier or an external
power amplifier (
p. 22, p. 25).
s SPEAKERS terminals
For connecting the front, center, surround and surround back speakers
(
p. 20). Connect the presence speakers (p. 20) or the speakers for
Zone2 and Zone3 (
p. 21) to the EXTRA SP jacks.
t AC IN
For connecting the supplied power cable.
HDMI OUT
12
ZONE OUT PRE OUT
ZONE 2
AV OUT
YP
B
P
R
SURROUND
SUR. BACK
CENTER
(FRONT)
1
2
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
ZONE 3
(SINGLE)
ZO
NE2
/
Z
O
NE
3
SU
RR
OU
ND
SU
RR
OU
ND BA
C
K
/
S
PEAKER
S
C
ENTE
R
AV
1
AV
2
AV
3
AV
4
HDMI
AV
5
AV
6
AV
7
S
IN
G
LE
F
R
O
NT
BI
-
AMP
EXTRA SP
2
A
V
3
A
V 4
C
A
L
O
PTICA
L
A
UDIO 1
(2 TV)
(3 CD)
A
UDIO
2
A
UDIO
3
A
UDIO 4
FRONT
S
URROUND
S
UR. BAC
K
S
UBWOOFER
CENTER
MU
LTI
C
H INP
U
T
COMPONENT VIDEO
COAXIA
L
e
f
Y
P
B
P
R
Y
P
B
P
R
C
D
IN
1
2
2
1
OU
T
IN
OUT
R
EMOT
E
TRI
GG
ER
O
U
T
+12V 0.1A MA
(1 BD
/
DVD
)
AV 1
A
V
2
A
B
Distinguishing the input and output jacks
The area around the audio/video output jacks is marked
in white to prevent connection errors. Use these jacks to
output audio/video signals to a TV or other external
component.
Output jacks
EXTRA SP1
ZONE2/ZONE3
ANTENNA
75
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
EXTRA SP2
12
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDIO 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
FRONT/
F. PRESENCE
AV OUT
abcd ef
YP
B
P
R
YP
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
(REAR)
(FRONT)
SUBWOOFER
1
2
RS-232C
IN
12
2
1
OUT IN OUT
REMOTE
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
ZONE 3
(SINGLE)
(1 BD/DVD)
AV 1
AV 2
A
B
ZONE2/ZONE3/
F.PRESENCE
GND
AM
FM
(4 RADIO)
bad g kjf
sl nmt
c
e h i
o p q r
INTRODUCTION
Part names and functions
En 11
Front panel display
a Tuner indicator
Light up according to the status of a received station (
p. 62).
b ZONE2/ZONE3 indicator
Lights up when the audio or video output to Zone2 or Zone3 is
enabled (
p. 132).
c SLEEP indicator
Blinks when the sleep timer is on (
p. 13, p. 132).
d PARTY indicator
Lights up when the party mode is active (
p. 105).
e Multi information display
Displays a range of information on menu items and settings.
f VOLUME indicator
Displays the current volume level.
g HDMI indicator
Lights up during normal HDMI communication.
IN indicator
Lights up when this unit detects the external component connected to
the HDMI input jack (
p. 30).
OUT 1/OUT 2 indicators
Indicate which HDMI OUT jack outputs audio/video signals
(
p. 28).
h ENHANCER indicator
Lights up when the Compressed Music Enhancer is active (
p. 52).
i CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
j CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated (
p. 51).
k Cursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
l MUTE indicator
Blinks when audio is muted.
m Speaker indicators
Indicate speaker terminals from which signals are output.
n ADAPTIVE DRC indicator
Lights when the adaptive dynamic range control feature is tuned on
(
p. 59).
Surround L speaker
Subwoofer 1
Surround R speaker
Center speaker
Surround back L
speaker
Surround back R
speaker
Surround back
speaker J1
Presence L speaker Presence R speaker
Front L speaker Front R speaker
Subwoofer 2
Switching information on the front panel display
The front panel can display sound programs and surround
decoder names as well as the active input source.
Press tINFO repeatedly to cycle through displayed
informations. J2
VOLUME
AV1

Standard
Input source name
Sound program (DSP program)
STEREO
TUNED
PARTY
ENHANCER
SLEEP
MUTE
VOLUME
ADAPTIVE
DRC
be fa c
ihj mknlgk
d
J
1 : “SB” is displayed when using a 6.1-channel configuration only.
J
2 : During FM/AM reception, the frequency is displayed instead of the input source.
INTRODUCTION
Part names and functions
En 12
Remote control
a Remote control signal transmitter
Transmits infrared signals.
b SOURCE A (SOURCE Power)
Switches an external component on and off.
c Display window
Displays remote control information.
d Input selector
Select an input source on this unit from which to playback.
e SCENE
Switch the input source and the sound program with a single button
(
p. 49). When this unit is in standby mode, press this key to switch
on.
f PROGRAM k / n
Selects a sound program (
p. 50). Press the up or down key
repeatedly to cycle through sound programs.
g External component operation keys
Operate recording, playback, and menu displays etc. for external
components (
p. 112). J1
h ON SCREEN
Turns on and off the ON SCREEN menu.
i Cursor B / C / D / E, ENTER, RETURN
j PRESET F / G
Selects a preset station when the FM/AM tuner is operated.
k TV control keys
Operate a monitor such as a TV.
l RECEIVER A (RECEIVER Power)
Switches this unit between on and standby mode.
m SOURCE/RECEIVER
Switches remote control key function to operate this unit or an
external component (
p. 112). Operate an external component when
this key glows green, or this unit when this key glows orange.
n VOLUME +/-
Adjust the volume level (
p. 47).
o MUTE
Turns the mute function of the sound output on and off (
p. 47).
p OPTION
Turns on and off the Option menu (
p. 57).
q DISPLAY
Switches the display between the Now Playing view and the Browse
view.
r Sound selection keys
Switch between the current sound field effect (sound program) and the
surround decoder (
p. 50).
LIVE
CLUB
CLASSICAL
PRESET
ENTERTAIN
STEREO
MOVIE
STRAIGHT
2
3
SOURCE
RECEIVER
AV
AUDIO
SCENE
TV
TV VOL TV CH
MUTE
RETURN DISPLAY
TOP MENU
POP-UP/MENU
VOLUME
PROGRAM
1
PURE
DIRECT
MUTE
INPUT
4
4
31
2
75
6
V-AUX
4
31
2
USB
MULTI
NET
PHONO
TUNER
DOCK
4
REC
ON SCREEN
OPTION
ENTER
[ B ]
[ A ]
a
c
b
h
i
p
q
n
j
k
f
m
o
l
d
e
g
g
r
AV1-7 AV1-7 jacks
V-AUX Front panel VIDEO AUX jacks
AUDIO1-4 AUDIO1-4 jacks
PHONO PHONO jacks
MULTI MULTI CH INPUT jacks
USB A USB storage device connected to the USB port.
NET Internet radio, a USB connected to the USB port,
or a PC connected to the NETWORK port.
DOCK A Universal Dock for iPod, Wireless System for
iPod, or Bluetooth Wireless Audio Receiver
connected to the DOCK jack.
TUNER FM/AM tuner
[A]/[B] Changes the external component to operate with
the gExternal component operation keys
without changing inputs. J1
Cursor B / C / D / E Select menu items and change settings when
menus, etc., are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when menus are
displayed, or close the menu.
J
1 : You can use gExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input
in advance if you want to operate external components (
p. 114).
INTRODUCTION
Part names and functions
En 13
Remote control with the cover open
s Sound selection keys
Switch between the current sound field effect (sound program) and the
surround decoder (
p. 50).
t INFO
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound program, the
surround decoder, the FM/AM tuner frequency, etc.).
u Numeric keys
Enter numbers.
v PARTY
Switches the party mode on and off (
p. 132).
w HDMI OUT
Switches the output jack connected to an HDMI compatible TV
(
p. 47).
x Radio control keys
Operates the FM/AM tuner. These keys are used when using the tuner
input.
y SLEEP
Switches this unit to standby mode automatically after a specified
period of time has elapsed (sleep timer). Press this key repeatedly to
set the time for the sleep timer function.
The SLEEP indicator lights up when the sleep timer is on.
z LEVEL
Adjusts the output level for each speaker (
p. 97).
A SETUP
Setup this remote control (
p. 113).
B ZONE
Switches the zone to be operated by the remote control between the
Main zone, Zone2, and Zone3 (
p. 132).
2
3
SOURCE
RECEIVER
AV
AUDIO
SCENE
MUTE
RETURN DISPLAY
TOP MENU
POP-UP/MENU
VOLUME
PROGRAM
1
4
4
31
2
75
6
V-AUX
4
31
2
USB
MULTI
NET
PHONO
TUNER
DOCK
4
ON SCREEN
OPTION
ENTER
FM
MEMORY
AM
INFO
3
TUN./CH
21
6
9
8
SLEEP
7
ENT
0
LEVEL
10
PARTY
ENHANCER
HDMI OUT
SUR.
DECODE
ZONE
SETUP
4
5
[ B ]
[ A ]
t
u
s
x
y
w
z
A
B
v
MEMORY Presets radio stations.
FM Sets the FM/AM tuner band to FM.
AM Sets the FM/AM tuner band to AM.
TUN./CH H / I Changes tuning frequencies.
120min. 90min.
60min.30min.Off
Installing batteries in the remote control
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert four AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Replace the batteries with new ones if the remote control can
only be operated within a narrow range.
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than 2 minutes, or leaving exhausted batteries in the remote
control, may clear the remote control codes. If this should occur,
replace the batteries with new ones, and set the remote control
codes.
b
a
c
Battery compartment
cover
Battery compartment
INTRODUCTION
Part names and functions
En 14
On-screen display
When a TV is connected to this unit, the supplied remote control can be used to specify and verify this
unit’s settings via menus and options displayed on the TV screen.
The following displays are available in the on-screen display.
ON SCREEN menu
Press hON SCREEN to display the ON
SCREEN menu.
Detailed settings for this unit can be
configured. Use this menu to select desired
settings, change their values, or check the
current status of this unit.
Refer to “SETUP” (
p. 82) for details.
Option menu
Press pOPTION to display the Option menu.
Configure the optional settings for each input
source. Settings such as “Tone Control” and
“Volume Trim” are applied to this unit
regardless of the input source.
Refer to “Configuring settings specific to an
individual input source (Option menu)”
(
p. 57) for details.
Content window
Press dInput selector to display the content
window.
Includes the Browse view and the Now
Playing view. The Now Playing view displays
the status of the source from which music is
currently played back. Adjust settings for
music content from the Browse view.
Refer to “Confirming and operating input
sources from the content window” (
p. 61)
for details.
En 15
CONNECTIONS
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
Front left and right speakers
The front speakers are used for the front channel sounds (stereo
sound) and effect sounds.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening
position in the front of the room. When using a projector screen,
the appropriate top positions of the speakers are about 1/4 of the
screen from the bottom.
Center speaker
The center speaker is for the center channel sounds (dialogue,
vocals, etc.).
Center speaker layout:
Place it halfway between the left and right front speakers. When
using a TV, place the speaker just above or just under the center of
the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Surround left and right speakers
The surround speakers are for effect and vocal sounds while
playing back more than 5.1-channel source. When used with no
surround back speaker while playing back more than 6.1-channel
source (including surround back channel), sound of surround back
channel is distributed between the left and right surround speakers.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides
facing the listening position. They should be placed between 60
degrees and 80 degrees from the listening position and with the
speaker tops at a height of 1.5 – 1.8 m from the floor.
Presence left and right speakers
The presence speakers are used for front effect sounds. When used
in combination with the sound programs (
p. 53), a sound with a
richer and more spatial presence is possible.
Presence speaker layout:
Place the left and right presence speakers 0.5 – 1 m to the outside
of the left and right front speakers respectively. The tops of the
presence speakers should be 1.8 m above the floor.
Surround back left and right speakers
The surround back speakers are for rear effect sounds while
playing back more than 6.1-channel source. When used with only
one surround back speaker while playing back more than 7.1-
channel source, sound of the left and right surround back channel is
mixed and output from a single speaker.
Surround back speaker layout:
When used with 7.1ch sound, arrange the left and right speakers
towards the listening position, to the rear of the listening position.
Arrange the left and right speakers at least 30 cm apart. The same
separation as with the front left and right speakers is optimum.
When used with 6.1ch sound, arrange these to the rear of the
listening position.
Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency
effect (LFE) sounds included in Dolby Digital and DTS. Use a
subwoofer that is equipped with built-in amplifier.
Subwoofer speaker layout:
Place it to the outside of the front left and right speakers facing
slightly inward to reduce echoes from the wall. You can use one or
two subwoofers and select the position of subwoofers from “Left +
Right,” “Front + Rear” and “Monaural x2” (
p. 96).
Connecting speakers
E.g.
E.g.
E.g.
E.g.
E.g.
E.g.
CONNECTIONS
Connecting speakers
En 16
Speaker layout
In addition to the 7.1-channel speaker layout, a variety of speaker configurations can be specified with
presence speaker connection, bi-amp connection or the Zone2/Zone3 function.
In addition, this unit is equipped with the “Power Amp Assign” function, which can be used to easily
apply the appropriate speaker settings to this unit according to speaker configuration.
Connection of speakers
Connect the speakers to the appropriate jacks shown in the table for each speaker layout. Refer to
“Connecting speakers and subwoofers” (
p. 20) for details on connecting speakers.
You can also use two subwoofers by connecting them to both SUBWOOFER1 (FRONT) and
SUBWOOFER2 (REAR) jacks. And, you can use the EXTRA SP1 jacks for Zone3 speakers and
EXTRA SP2 jacks for Zone2 by setting the assignment with “Power Amp Assign” (
p. 95).
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate the speakers. Use the Power Amp
Assign function to apply the appropriate settings shown in the table for each speaker layout. Refer to
“Power Amp Assign” (
p. 95) for details on setting.
Enjoying the 7.1 channel audio source
7.1-channel speaker layout (7 speakers + subwoofer)
Connections of speakers
Assigning a speaker configuration
Audio from a 7.1-channel audio source can be played back with no degradation with this speaker
configuration.
FRONT jacks Front L/R speakers SURROUND
BACK jacks
Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers
Power Amp Assign 7ch Normal (Default)
Front L speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R
speaker
Surround back R speaker
Surround back L speaker J1
30 cm
or more
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
CONNECTIONS
Connecting speakers
En 17
Adding the presence speakers for a richer sound field effect
Presence speaker layout (7 speakers + subwoofer + presence speakers)
Connections of speakers
Assigning a speaker configuration
Enjoying the audio source without surround back speakers
5.1-channel speaker layout (5 speakers + subwoofer)
Connections of speakers
Assigning a speaker configuration
This unit automatically selects the presence speakers or surround back speakers to output sounds
according to the selected sound program.
When the sound program is changed, the speakers that output the sound are switched between the
presence speakers and surround back speakers automatically. J2
FRONT jacks Front L/R speakers SURROUND
BACK jacks
Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers EXTRA SP1 jacks Presence L/R speakers
Power Amp Assign 7ch Normal (Default)
Front L
speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R
speaker
Presence R speaker
Presence
L speaker
Surround back
R speaker
Surround back L speaker J1
30 cm
or more
This unit can mix 7.1-channel audio source down to 5.1-channel sound. This enables 7.1-channel
sound without surround back speakers.
FRONT jacks Front L/R speakers SURROUND jacks Surround L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
Power Amp Assign 7ch Normal (Default)
Front L speaker
Front R speaker
Subwoofer
Center speaker
Surround L speaker
Surround R
speaker
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP1
jacks.
CONNECTIONS
Connecting speakers
En 18
Using the front speakers that support bi-amp connections for a
high quality sound
5.1-channel speaker layout (Front speakers (Bi-amp) + 3 speakers)
Connections of speakers
Assigning a speaker configuration
Using speakers in two rooms (Zone2 function)
7.1-channel speaker layout + Zone2 (7 speakers (in main zone) + subwoofer (in
main zone) + front speakers (in secondary zone))
Connections of speakers
Assigning a speaker configuration
Using the front speakers that support bi-amp connections reproduces a high quality sound.
FRONT jacks Front L/R speakers (bi-amp) SURROUND
BACK jacks
Front L/R speakers (bi-amp)
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers
Power Amp Assign 5ch BI-AMP
Front L speaker
(Bi-amp connection)
Front R speaker
(Bi-amp connection)
Center speaker
Surround L speaker
Surround R
speaker
Subwoofer
In addition to the main room, speakers in another room can also be controlled.
When the built-in amplifier assigned to speakers in another room is turned on, sound output
automatically switches from the surround back speakers to the speakers in the other room. J2
FRONT jacks Front L/R speakers SURROUND
BACK jacks
Surround back L/R speakers
CENTER jack Center speaker SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks Surround L/R speakers EXTRA SP1
jacks J3
Zone2 speakers
Power Amp Assign 7ch + 1ZONE
Front L speaker
Front R speaker
Center speaker
Subwoofer
Surround R speaker
Surround L speaker
Surround back L speaker J1
Surround back R
speaker
30 cm
or more
Front R speaker
Front L speaker
Main zone Zone2
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP1
jacks.
J
3 : EXTRA SP1 jacks can also be assigned to the Zone3 speakers with “Power Amp Assign” (p. 95).
CONNECTIONS
Connecting speakers
En 19
Using speakers in three rooms (Zone2 and Zone3 functions)
7.1-channel speaker layout + Zone2 + Zone3 (7 speakers (in main zone) +
subwoofer (in main zone) + front speakers (in secondary and tertiary zones))
Connections of speakers
Assigning a speaker configuration
In addition to the main room, speakers in other two rooms can also be controlled.
When the built-in amplifier assigned to speakers in another room is turned on, sound output
automatically switches from the surround back and/or surround speakers to the speakers in the other
rooms. J2, J3
Front L speaker
Front R speaker
Center speaker
Subwoofer
Surround R
speaker
Surround L speaker
Surround back L speaker J1
Surround back
R speaker
30 cm
or more
Zone2
Zone3
Front R
speaker
Front R
speaker
Front L speaker
Front L speaker
Main zone
FRONT jacks Front L/R speakers SUBWOOFER
(PRE OUT) jack
Subwoofer
CENTER jack Center speaker EXTRA SP1
jacks J4
Zone2 speakers
SURROUND jacks Surround L/R speakers EXTRA SP2
jacks J5
Zone3 speakers
SURROUND
BACK jacks
Surround back L/R speakers
Power Amp Assign 7ch + 2ZONE
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP1
jacks.
J
3 : Sound cannot be output from the surround speakers when it is output from the speakers connected to the EXTRA SP2 jacks.
J
4 : EXTRA SP1 jacks can also be assigned to the Zone3 speakers with “Power Amp Assign” (p. 95).
J
5 : EXTRA SP2 jacks can also be assigned to the Zone2 speakers with “Power Amp Assign” (p. 95).
CONNECTIONS
Connecting speakers
En 20
Connecting speakers and subwoofers
Connect your speakers to their respective terminals on the rear panel.
Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP1 jacks as shown in the diagram below.
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs (
p. 57),
sound with a richer and more spatial presence can be created.
CAUTION
Remove the power cable of this unit from the power outlet before connecting the speakers.
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
SURROUND SURROUND BACK/
CENTER
SINGLE
FRONT
BI-AMP
(FRONT)
1
A
V 2
A
V
3
A
V 4
HDMI
A
V
5
A
V
6
A
V
7
AV
3
AV 4
U
RROUN
D
SUR. BACK
S
UBWOOFE
R
C
ENTER
M
ULTI
C
H INPU
T
O
MP
O
NENT VIDE
O
MONITOR OUT/ZONE OUT
Z
O
NE
OUT
PRE
OUT
ZO
NE 2
F
RONT
/
F. PRE
S
EN
C
E
Y
P
B
P
R
P
R
Y
P
B
P
R
C
D
S
URROUN
D
S
UR. BACK
CENTE
R
(
REAR
)
SUBWOOFER
()()
2
R
S
-2
3
2
C
IN
1
2
2
1
OUT
IN
OU
T
R
EMOTE
TRIGGE
R
O
UT
+
12V
0
.1A MAX
.
E
XTRA
S
P1
ZO
NE
3
(SINGLE)
DVD
)
ZO
NE2
/
Z
ON
F.P R E
S
E
N
Subwoofer
Center speaker
Front speaker
Surround
speaker
Surround back
speaker
RL
RL RL
EXTRA SP1
ZONE2/ZONE3/
F.PRESENCE
A
C
IN
C
ENTE
R
AV
6
AV 7
F
RON
T
U
R. BA
CK
C
ENTE
R
(
REAR
)
(FRONT)
SUBWOOFER
()()
1
1
2
RS-232C
IN
1
2
2
1
O
U
T
I
N
O
UT
R
EMOTE
TRI
GG
E
R
O
UT
+
12
V
0
.1
A
MAX.
SINGLE)
Presence speaker
RL
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
0.5 – 1 m 0.5 – 1 m
PL PR
LR
1.8 m 1.8 m
Continues to the
next page
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

Yamaha RX-V2067 El kitabı

Kategori
AV alıcıları
Tip
El kitabı