Slide the hook on the nozzle
into the slot on the side of
vacuum cleaner. You can store
your vacuum cleaner in a verti-
cal position by sliding the hook
on the nozzle into the slot on
the underside of the vacuum
cleaner.
Raising the dust tank (24)
After turning off appliance and
unplug it.slide lever (18) and
hold the tank handle, then raise
the tank.
Opening the dust tank (25)
Please pull the hook (21)
behind the tank, then open the
tank cover.
Emptying the dust tank
As below, if these things
happen to your vacuum cleaner,
please turn off the appliance,
unplug it and remove hose.
Take out the dust tank (24) and
motor safety filter (22) from the
cleaner. Then empty the dust
tank (26) and clean the motor
safety filter (22).
• When the dust in the tank (19)
reaches the maximum line.
• When a great deal of dust has
clogged up the inner cover
(20).
• When the motor safety filter
(22) is full of dust.
Wash the dust tank (27) with
cold water.
Dry fully in shade so that mois-
ture is removed entirely.
If after emptying the dust
tank the suction is low,
clean the motor safety
filter.
Failure to do so could result
in product damage.
Closing the dust tank
According to the arrow’s
direction(30) on the top of tank
handle,please take the hook into
the hole on the handle and close
the dust tank by locking the
hook behind it.
Cleaning the motor safety
filter
The motor safety filter is situated
inside the appliance under the
dust tank.
Each time that you clean the
motor safety filter, we advise you
to take out the motor safety
filter(28).
Wash it with cold water (29) and
dry fully in shade so that mois-
ture is removed entirely.
And then place it again in the
vacuum cleaner.
The motor safety filter should be
cleaned at least once a month.
Fixing the dust tank
According to the arrow’s direc-
tion (31), please close the dust
tank correctly and then put it in
the vacuum cleaner.
- 19 -