LG LCF12P El kitabı

TABLE OF CONTENTS

1) MANUAL FOR MIDDLE EAST AFRICAN COUNTRIES.........2-73

1.1)ENGLISH......................................2-25

1.2)FRENCH.......................................26-49

1.3)ARABIC.......................................50-73

2) MANUAL FOR TURKEY ...................... .......74-109

2.1)ENGLISH......................................74-91

2.2)TURKISH......................................92-109

3) MANUAL FOR LATIN AMERICAN COUNTRIES..............110-165

3.1)ENGLISH ................ ....................110-127

3.2)SPANISH......................................128-165

www.lg.com

OWNER’S MANUAL

CEILING FAN

Read this owner’s manual thoroughly before operating the

appliance and keep it handy for reference at all times.

TYPE: CEILING FAN

MODEL : LCF12* (FC48G****)

EN ENGLISH FR FRANÇAIS AR ةيبرعلا

MFL70584103

Rev.00_030520

1

TABLE OF CONTENTS

This manual may contain images or content

different from the model you purchased.

This manual is subject to revision by the

manufacturer.

SAFETY INSTRUCTIONS ................................................. 3

IMPORTANT SAFETY INSTRUCTIONS ............................................ 3

PRODUCT OVERVIEW ...................................................... 8

Parts and Specifications...................................................................... 8

OPERATION ....................................................................... 9

Status Display Panel ........................................................................... 9

Remote Controller ............................................................................. 10

Using the Extra Function ................................................................... 12

SMART FUNCTIONS ....................................................... 13

LG ThinQ Application ........................................................................ 13

Smart Diagnosis ................................................................................ 14

MAINTENANCE ................................................................ 15

Recommended Maintenance Schedule ............................................ 15

TROUBLESHOOTING ..................................................... 16

2

3

SAFETY INSTRUCTIONS

EN

The following safety guidelines are intended to prevent unforeseen

risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as

described below.

This symbol is displayed to indicate matters and operations

that can cause risk. Read the part with this symbol carefully

and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can

cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury

or scalding to persons when using this product, follow basic

precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not

play with the appliance.

If unusual oscillating movement is observed, immediately stop using the

ceiling fan and contact the manufacturer, its service agent or suitably

qualified persons.

3

4

EN

Installation

• Electrical or installation work needs to be performed by a qualified

service personnel.

• The replacement of parts of the safety suspension system device

shall be performed by the manufacturer, its service agent or suitably

qualified persons.

• Do not install the appliance less than 2.5 m from the ground and 1 m

from the wall to the blades.

• Ensure that the ceiling hook or other safey suspension devices shall

sustain more than 10 times the appliance weight.

• Ensure that the shaft has been fully tighten to motor shaft and shackle.

• Firmly tighten the blade screws using a screwdriver.

• Do not install the appliance in a place where flammable liquids or

gases such as gasoline, propane, paint thinner, etc., are stored.

• Do not install the appliance somewhere exposed to direct sunlight.

• Do not install the appliance in an area prone to combustible gas leaks,

grease, or metal dust.

• If the supply cord is damaged, it must be replaced by manufacturer or

service personnel in order to avoid hazard.

Operation

• Connect this appliance as per the rated voltage and frequency printed

on the name plate.

• Do not touch the power switch with wet hands.

• Do not disassemble, repair, modify or touch the appliance while it is

operating.

• Do not insert hands or any objects into the appliance.

• Do not place any objects on the appliance.

4

5

EN

• Do not use or store flammable or combustible substances (ether,

benzene, alcohol, chemical, LPG, combustible spray, insecticide, air

freshener, cosmetics, etc.) near the appliance.

• If there is a gas leakage (isobutane, propane, natural gas, etc.),

do not touch the appliance or power switch and ventilate the area

immediately.

• Cut off the power supply if there is any noise, smell, or smoke coming

from the appliance.

• Do not expose the appliance to splashing water or rain.

• Do not touch, operate, or repair the appliance with wet hands.

• In case of flood, cut off the power switch and contact the LG

Electronics customer service center.

• Dispose of all packaging materials (such as plastic bags and styrofoam)

away from children. The packaging materials can cause suffocation.

Maintenance

• Before cleaning or performing maintenance, disconnect the power

supply and wait until the blade stops.

• Do not use an abrasive cloth, sponge, or a metal brush to clean the

appliance.

Battery

• A button/coin-shaped battery is used in the remote controller of the

appliance. If you accidentally swallowed the battery, go to the doctor

immediately for emergency treatment. If you fail to receive first aid

within 2 hours after you swallowed it, you may experience damage to

your internal organs or death in severe cases.

• Do not swallow the battery.

• If the battery tray is not secured firmly, stop using the appliance

instantly and keep it away from children.

• Replace the all batteries in the remote controller with new ones of the

same type. Do not mix old and new batteries or different types of batteries.

5

6

CAUTION

To reduce the risk of minor injury to persons, malfunction, or

damage to the product or property when using this product, follow

basic precautions, including the following:

Installation

• Do not install the appliance at a wet, high temperature, high humidity

area, high vibration, windy places.

• Do not install the appliance in freezing temperature.

• Do not install the appliance on or near items that may be damaged or

discolored by heat or humidity.

• Do not install the appliance near curtains.

• Do not install the appliance within 1 m of a TV or stereo equipment. It

may cause interference.

• After installation make sure the appliance does not tremble extremely.

Operation

• Do not use the appliance in place of a vent hood. Doing so will shorten

the appliance’s lifespan.

• Do not operate in an area with unstable voltage, the appliance may

automatically shut down to protect appliance components.

• This appliance is intended to be used in household and domestic

applications only and must not be used for commercial purposes.

EN

6

7

Maintenance

• Replace all the blades if any of them breaks or cracks.

• Never use strong cleaning agents or solvents when cleaning the

appliance. Use a smooth cloth.

• Use a sturdy stool or ladder, when cleaning, maintaining or repairing

the ceiling fan at height.

Battery

• Do not modify the battery arbitrarily.

• Misplaced battery may cause an explosion.

• Do not recharge or take apart the battery.

• Do not throw the battery in the fire for disposal or leave it near the heat.

• Remove and store the battery in a safe location if you don’t intend to

use the remote controller for a long time.

EN

7

8

PRODUCT OVERVIEW

EN

Parts and Specifications

Exterior

Specifications

Parameters Values

Input Voltage AC 220-240 V 1 Ø

Rated Frequency 50 Hz

Sweep 1200 mm

Typical Input Power 30 W

Speed Control Through Remote and Power Switch

Remote Battery CR2025 3V

Weight 3.7 kg (Net)

NOTE

• Specified weight may differ from actual weight.

8

9

EN

Status Display Panel

1

2

5

3

4

*Broken Line ( ): Optional

OPERATION

Receiver for Remote Controller Signal

Face the remote controller to the Receiver, the remote signal will pass through it.

Wi-Fi (Optional)

When the appliance is connected to a Wi-Fi network,

is displayed on the display screen.

Sleep Mode

When the sleep mode is selected, all display except the

will be off after displaying for 3 seconds.

Fan Speed

Whenever press Speed button (

) on the remote controller, fan speed will be changed.

(Speed 4)(Speed 3)(Speed 2)(Speed 1)

Timer

Whenever press Timer button (

) on the remote controller, the setting time will be changed.

2hr 4hr 6hr 8hr Off

NOTE

• Only when the functions operate, the display will light on.

• The appearance or functions of the appliance may differ depending on the model.

9

10

EN

Remote Controller

Inserting Battery

1

With the backside of the remote controller facing

up, remove the battery tray from the remote

controller.

2

Insert the battery provided with the appliance

to the tray.

• The (+) electrode of the battery must face

upward.

3

Insert the battery tray to the remote controller.

NOTE

• If the battery runs out of charge, replace it with a

new one (CR2025).

• If the remote controller does not work as expected,

try to replace the battery or check the polarity (+, -)

of the battery. If the problem continues, contact the

service centre.

• Dispose of the used battery according to the

environmental regulations.

10

11

EN

Remote Controller Features

1

2

3

4

5

Start/Stop

Speed

Controls the fan speed.

Display

Turn on/off the display lightings.

Timer

Set time to power off.

Sleep

Turn on/off the sleep mode.

• When you enter sleep mode, the wind speed decreases by one step every hour. In case of “Speed1”, it

is maintained.

Wi-Fi

Press this button during 3 seconds for paring. For unparing, press 3 seconds again.

• Turning off Wi-Fi

− Press and hold the Start/Stop button and the Wi-Fi button at the same time for more than 3 seconds

to turn off Wi-Fi. After finishing the product registration and while Wi-Fi is off, press and hold the

Wi-Fi button for more than 3 seconds just once to turn on Wi-Fi and to control the product using the

registered smartphone.

NOTE

• When operating the fan, you have to set up the regulator with 5 step (maximum) only.

• If you miss your remote controller, you can operate the fan by using wall switch on/off.

• The appearance or function of the remote controller may vary depending on the model.

1 time Return to previous step before you switch on/off.

2 times Speed 1

3 times Speed 2

4 times Speed 3

5 times Speed 4

11

12

EN

Operating Method

5 m

45°

CAUTION

• Do not step on or apply pressure.

• Do not store or use near water or in high humidity.

• Do not store or use near an open flame or

heating devices such as space heaters or ovens.

Otherwise the battery could explode.

NOTE

• To use the remote controller, direct the signal

sending area of the remote controller toward the

signal reception area of the appliance.

• The remote works best within 5 m and 45° to the

left or right of the sensor in front of the appliance.

• Pressing multiple buttons at the same time may

cause the remote controller to malfunction.

• The remote controller may not work properly where

there is a strong light, such as those from a 3-wave

length fluorescent lamp or a neon sign.

• If you lost the remote controller, you can purchase

a new one in a nearby service centre.

Using the Extra Function

Sleep Mode

Use the sleep mode to make more silent and display

lighting off.

1

Press the Start/Stop button.

2

Press the Sleep button to select the Sleep

mode.

NOTE

• After setting this mode, the fan speed will reduce

next step automatically and to fan speed 1 finally.

• In Sleep mode, you can adjust the fan speed

manually using the Speed button.

• The Sleep mode will be kept until pressing the

Sleep button once.

12

13

LG ThinQ Application

The LG ThinQ application allows you to

communicate with the appliance using a smartphone.

LG ThinQ Application Features

Smart Diagnosis

If you experience a problem while using the

appliance, this smart diagnosis feature will help you

diagnose the problem.

Settings

Allows you to set various options on the appliance

and in the application.

NOTE

• If you change your wireless router, Internet service

provider, or password, delete the registered

appliance from the LG ThinQ application and

register it again.

• The application is subject to change for appliance

improvement purposes without notice to users.

• Functions may vary by model.

Before using LG ThinQ Application

This feature is only available on models with Wi-Fi

function.

1

Check the distance between the appliance and

the wireless router (Wi-Fi network).

• If the distance between the appliance and the

wireless router is too far, the signal strength

becomes weak. It may take a long time to

register or installation may fail.

2

Turn off the Mobile data or Cellular Data on

your smartphone.

3

Connect your smartphone to the wireless

router.

NOTE

• To verify the Wi-Fi connection, check that Wi-Fi

icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks

only. To check your network frequency, contact your

Internet service provider or refer to your wireless

router manual.

• LG ThinQ is not responsible for any network

connection problems or any faults, malfunctions, or

errors caused by network connection.

• If the appliance is having trouble connecting to the

Wi-Fi network, it may be too far from the router.

Purchase a Wi-Fi repeater (range extender) to

improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may

be interrupted because of the home network

environment.

• The network connection may not work properly

depending on the Internet service provider.

• The surrounding wireless environment can make

the wireless network service run slowly.

• The appliance cannot be registered due to

problems with the wireless signal transmission.

Unplug the appliance and wait about a minute

before trying again.

• If the firewall on your wireless router is enabled,

disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a

combination of English letters and numbers. (Do

not use special characters.)

• Smartphone user interface (UI) may vary

depending on the mobile operating system (OS)

and the manufacturer.

• If the security protocol of the router is set to WEP,

you may fail to set up the network. Please change it

to other security protocols (WPA2 is recommended)

and register the product again.

SMART FUNCTIONS

EN

13

14

EN

Installing LG ThinQ Application

Search for the LG ThinQ application from the Google

Play Store or Apple App Store on a smartphone.

Follow instructions to download and install the

application.

Wireless LAN Module

Specifications

Model LCW-003

Frequency

Range

2412 - 2472 MHz

Output

Power (Max)

IEEE 802.11b: 18.37 dBm

IEEE 802.11g: 17.67 dBm

IEEE 802.11n: 17.67 dBm

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained in

this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

to [email protected]. This offer is valid for a

period of three years after our last shipment of this

product. This offer is valid to anyone in receipt of this

information.

Smart Diagnosis

This feature is only available on models with the

or logo.

Use this feature to help you diagnose and solve

problems with your appliance.

NOTE

• For reasons not attributable to LGE’s negligence,

the service may not operate due to external factors

such as, but not limited to, Wi-Fi unavailability,

Wi-Fi disconnection, local app store policy, or app

unavailability.

• The feature may be subject to change without prior

notice and may have a different form depending on

where you are located.

Using LG ThinQ to Diagnose Issues

If you experience a problem with your Wi-Fi equipped

appliance, it can transmit troubleshooting data to a

smartphone using the LG ThinQ application.

• Launch the LG ThinQ application and select the

Smart Diagnosis feature in the menu. Follow the

instructions provided in the LG ThinQ application.

14

15

EN

CAUTION

• Do not spray water on or into appliance. Doing so will cause appliance failure.

• Do not bend the blade while cleaning.

• Do not use alkaline detergents to clean the appliance.

• Do not attach stickers or use sulfuric acid, hydrochloric acid, or organic solvents such as thinners, lamp oil, or

acetone on the appliance’s surface. Doing so may damage the surface.

• Wipe away dirt with a clean soft cloth, ordinary soap and water.

• Ensure the ceiling fan is cut-off from power supply before removing the guard.

Recommended Maintenance Schedule

Parts Frequency

Check and clean every one year.

Ceiling Fan

Check for any damage and corrosion every year.

Shaft Assembly

Check for any damage and corrosion every year.

Shackle Assembly

Keep the blades clean and check every month.

Blade Assembly

Keep the guides clean and check every month.

Guide

MAINTENANCE

15

16

EN

TROUBLESHOOTING

Before Calling for Service

Please check the following before you contact the service center. If the problem persists, contact your local

service center.

Problem Possible Causes & Solution

When supply power but

not power on, can’t hear

the beep.

Power is not supplied.

• Turn on the power switch.

Appliance is making noise.

Install location is too close to the wall or ceiling.

• Check the distance and reinstall at proper location.

Installation is not good.

• Check each assemble parts are proper and firmly tightened.

Sleep lighting is flickering

continuously.

Fan is locked.

• Use a regulator to turn off the power and turn on one minute later.

• If the same problem occurs, power off and call to service center.

Ceiling Fan not Working.

The voltage conditions are unstable.

• Check Voltage Condition, If unstable contact local Electrician.

Ceiling fan suddenly turns

off and turns on.

The installed environment is very windy.

• It’s the normal process of finding the right wind speed for your environment.

So fan can stop and re-adjust during high external wind.

When press a button on

remote controller, can’t

hear the beep.

Remote controller power is not supplied.

• Check the direction of remote controller battery or change it.

Remote controller is not

working.

Too far to communicate with sensor.

• Move close to the appliance and try again.

Your home appliance

and smartphone is not

connected to the Wi-Fi

network.

The password for the Wi-Fi that you are trying to connect to is incorrect.

• Find the Wi-Fi network connected to your smartphone and remove it, then

register your appliance on LG ThinQ.

Mobile data for your smartphone is turned on.

• Turn off the Mobile data of your smartphone and register the appliance using

the Wi-Fi network.

The wireless network name (SSID) is set incorrectly.

• The wireless network name (SSID) should be a combination of English letters

and numbers. (Do not use special characters.)

The router frequency is not 2.4 GHz.

• Only a 2.4 GHz router frequency is supported. Set the wireless router to

2.4 GHz and connect the appliance to the wireless router. To check the

router frequency, check with your Internet service provider or the router

manufacturer.

The distance between the appliance and the router is too far.

• If the distance between the appliance and the router is too far, the signal

may be weak and the connection may not be configured correctly. Move the

location of the router so that it is closer to the appliance.

16

Customer’s Copy

Name of Purchaser ________________________________________________________

Invoice No. & Date ________________________________________________________

Model ________________________________________________________

Serial No. ________________________________________________________

Name & Address of the Seller

(LG / Authorised Dealer)

________________________________________________________

Customer’s Copy

Name of Purchaser ________________________________________________________

Invoice No. & Date ________________________________________________________

Model ________________________________________________________

Serial No. ________________________________________________________

Name & Address of the Seller

(LG / Authorised Dealer)

________________________________________________________

-------------------------------------------------------------------------------------------------------------------------------

-------------------------

17

Memo

18

Memo

19

Sayfa yükleniyor ...

LG LCF12P El kitabı

LG LCF12P El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler