Yamaha DVX-S301 El kitabı

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

GB

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Printed in China 3139 246 16161

DVX-S301/DVX-S302/DVX-S303

DVX-S300_GB_cv.fm Page 1 Tuesday, June 7, 2005 11:29 AM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

i

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2

Install this sound system in a well ventilated, cool, dry, clean place

with at least 10 cm on the top, 10 cm on the left and right, and 10

cm at the back of DVR-S300 and at least 1 m above, 30 cm

behind and on both sides of NX-SW300 or NX-SW301 for

adequate ventilation.

— away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, nor locate this unit in an environment with high

humidity (i.e., a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects

may fall onto this unit or where this unit may be exposed to

liquid dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user and/

or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit

with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury.

YAMAHA will not be held responsible for any damage

resulting from use of this unit with a voltage other than as

specified.

13 To prevent damage by lightning, keep the power cord out and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed. The

cabinet should never be opened for any reason.

15

When not planning to use this unit for long periods of time (i.e.,

vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

17 Before moving this unit, press STANDBY/ON to set the unit

in standby mode, then disconnect the AC power plug from the

wall outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power cable from the

outlet, then leave the unit alone.

19 When using the unit for a long time, the unit may become

warm. Turn the power off, then leave the unit alone for

cooling.

20 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

the standby mode. In this state, this unit is designed to

consume a very small quantity of power.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

ii

English

¶ The name plate is located on the bottom of the unit.

¶ La plaquette signalétique est placée sur le panneau de

fond de l’appareil.

¶ Das Typenschild ist an der Unterseite des Gerätes

angeordnet.

¶ Namnplåten sitter på apparatens undersida.

¶ La targhetta del nome del modello si trova sul fondo

dell’unità.

¶ La placa de características está en la parte inferior de la

unidad.

¶ Het typeplaatje kunt u vinden aan de onderkant van het

toestel.

¶ Çàâîäñêàÿ òàáëè÷êà ðàñïîëîæåíà íà íèæíåé ñòîðîíå

àïïàðàòà.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the

cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam. When this unit is

plugged into a wall outlet, do not place your eyes close

to the opening of the disc tray and other openings or

look inside.

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

784 nm (VCD/CD)

Output Power 7 mW (DVD/VCD/CD)

Beam divergence 60 degrees

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

INVISIBLE LASER RADIATION WHEN OPEN

DO NOT STARE INTO BEAM

CAUTION:

INVISIBLE LASER RADIATION WHEN OPEN

AVOID DIRECT EXPOSURE TO THE BEAM

DANGER:

SÉCURITÉ LASER

L'appareil utilise un laser. En raison des risques de

blessure des yeux, le retrait du couvercle ou les

réparations de l'appareil devront être confiés

exclusivement à un technicien d'entretien qualifié.

DANGER

Risque d'exposition au laser en cas d'ouverture. Eviter

toute exposition au faisceau. Lorsque cet appareil est

branché à la prise de courant, ne pas approcher les

yeux de l'ouverture du plateau changeur et des autres

ouvertures pour regarder à l'intérieur.

LASER

Type Laser à semi-conducteur

GaAIAs

Longueur d’onde 650 nm (DVD)

784 nm (VCD/CD)

Puissance de sortie 7 mW (DVD/VCD/CD)

Divergence de faisceau 60 degrés

AVERTISSEMENT

L’utilisation de commandes et l’emploi de réglages ou

de méthodes autres que ceux décrits ci-dessous,

peuvent entraîner une exposition à un rayonnement

dangereux.

VORSICHT MIT DEM LASER

Dieses Gerät enthält einen Laser. Um unnötige

Augenverletzungen zu vermeiden, sollten Sie alle

Wartungs- und Reparaturarbeiten einem qualifiziertem

Wartungstechniker überlassen.

GEFAHR

Sichtbare Laserstrahlen bei geöffneter Abdeckung.

Achten Sie darauf, nicht direkt in den Laserstrahl zu

blicken. Wenn das Gerät an die Wandsteckdose

angeschlossen ist, halten Sie die Augen von der

Öffnung des Disc-Fachs und der Öffnungen fern, und

blicken Sie in diesem Fall nicht in das Innere des

Gerätes

.

LASER

Typ Halbleiter-GaAlAs-Laser

Wellenlänge 650 nm (DVD)

784 nm (VCD/CD)

Ausgangsleistung 7 mW (DVD/VCD/CD)

Strahlstreuung 60 Grad

VORSICHT

Die Verwendung von Bedienelementen oder die

Einstellung bzw. die Ausführung von anderen als in

dieser Anleitung beschriebenen Vorgängen kann zu

Gefährdung durch gefährliche Strahlung führen.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

iii

LASERSÄKERHET

Apparaten använder sig av en laser. På grund av risken

för ögonskador bör ingen annan än en kvalificerad

reparatör öppna höljet eller försöka reparera apparaten.

FARA

Apparaten avger slig laserstrålning i öppet läge.

Undvik direkt ögonkontakt med strålen. Placera inte

ögonen nära öppningen till skivfacket eller någon

annan öppning och titta inte in i apparaten, medan

apparaten är ansluten till ett nätuttag.

LASER

Typ Halvledarlaser GaAlAs

Våglängd 650 nm (DVD)

784 nm (VCD/CD)

Uteffekt 7 mW (DVD/VCD/CD)

Stråldivergens 60 grader

OBSERVERA

Användning av reglage eller justeringar eller utförande

av åtgärder på annat sätt än så som beskrivs häri kan

resultera i farlig strålning.

SICUREZZA DEL LASER

Quest'unità impiega un laser. Poiché è possibile

causare lesioni agli occhi, solo personale qualificato di

assistenza tecnica deve aprire la copertura o cercare di

riparare questo dispositivo.

PERICOLO

Radiazioni laser visibili quando aperto. Evitare

l'esposizione diretta al raggio laser Quando quest'unità

è collegata ad una presa a muro, non avvicinare gli

occhi all'apertura del cassetto del disco o ad altre

aperture per guardare all'interno.

LASER

Tipo

Laser a semiconduttori al GaAlAs

Lunghezza d'onda 650 nm (DVD)

784 nm (VCD/CD)

Potenza d'uscita 7 mW (DVD/VCD/CD)

Divergenza raggi 60 gradi

ATTENZIONE

L’uso di controlli, regolazioni, operazioni o procedure non

specificati in questo manuale possono risultare in esposizione

a radiazioni pericolose.

SEGURIDAD CONTRA LA RADIACIÓN LÁSER

Esta unidad utiliza rayos láser. Debido a la posibilidad

de que se produzcan daños en los ojos, la extracción de

la cubierta de la unidad o las reparaciones solamente

deberán ser realizadas por un técnico cualificado.

PELIGRO

Esta unidad emite radiación láser visible cuando se

abre. Evite la exposición directa a los rayos láser.

Cuando esta unidad esté enchufada a una toma de

corriente, no ponga sus ojos cerca de la abertura de la

bandeja del disco ni otras aberturas para mirar al

interior.

LÁSER

Tipo Láser de semiconductor

GaA1As

Longitud de onda 650 nm (DVD)

784 nm (VCD/CD)

Potencia de salida 7 mW (DVD/VCD/CD)

Divergencia del rayo láser 60 grados

PRECAUCIÓN

El uso de los controles, los ajustes o los

procedimientos que no se especifican enste manual

pueden causar una exposición peligrosa a la radiación.

VEILIGHEIDSINFORMATIE BETREFFENDE DE

LASER

Dit apparaat is voorzien van een laser. Om oogletsel te

voorkomen, mag u het verwijderen van de afdekking en

het uitvoeren van reparaties aan deze inrichting uitsluitend

door een bevoegde servicemonteur laten uitvoeren.

GEVAAR

Zichtbare laserstraling indien geopend. Voorkom

rechtstreekse blootstelling aan de laserstraal.

Als dit toestel is aangesloten op een stopcontact, houdt

u uw ogen niet dicht bij de opening van de disclade en

andere openingen om naar binnen te kijken.

LASER

Type GaAlAs Halfgeleiderlaser

Golflengte 650 nm (DVD)

784 nm (VCD/CD)

Uitgangsvermogen 7 mW (DVD/VCD/CD)

Uitwijking straal 60 graden

LET OP

Gebruik van bedieningsorganen, instellingen of

procedures anders dan beschreven in dit document kan

leiden tot blootstelling aan gevaarlijke stralen.

БЕЗОПАСНОЕ ИСПОЛЬЗОВАНИЕ ЛАЗЕРА

Äàííîå óñòðîéñòâî ñîäåðæèò ëàçåð. Èç-çà îïàñíîñòè òðàâìû ãëàç, ñíèìàòü

êðûøêó èëè îáñëóæèâàòü äàííîå óñòðîéñòâî äîëæåí òîëüêî

ñåðòèôèöèðîâàííûé îáñëóæèâàþùèé ïåðñîíàë.

ОПАСНОСТЬ

Äàííîå óñòðîéñòâî â îòêðûòîì ñîñòîÿíèè èçëó÷àåò âèäèìûå

ëàçåðíûå ëó÷è. Íå äîïóñêàéòå íåïîñðåäñòâåííîãî âîçäåéñòâèÿ

ëàçåðíûõ ëó÷åé íà ãëàçà. Êîãäà äàííîå óñòðîéñòâî ïîäêëþ÷åíî ê

ðîçåòêå, íå ïðèáëèæàéòå ãëàçà ê îòâåðñòèþ ëîòêà äèñêà è äðóãèì

îòâåðñòèÿì, è íå ñìîòðèòå âíóòðü àïïàðàòà.

ЛАЗЕР

Òèï

Ïîëóïðîâîäíèêîâûé ëàçåð GaAlAs

Äëèíà âîëíû 650 nm (DVD)

784 nm (VCD/CD)

Âûõîäíîå íàïðÿæåíèå

7 mW (DVD/VCD/CD)

Îòêëîíåíèå ëó÷à 60 ãðàäóñîâ

ПРЕДОСТЕРЕЖЕНИЕ

Èñïîëüçîâàíèå îðãàíîâ óïðàâëåíèÿ èëè ïðîèçâåäåíèå íàñòðîåê èëè

âûïîëíåíèå ïðîöåäóð, íå óêàçàííûõ â äàííîé èíñòðóêöèè, ìîæåò

îòðàçèòüñÿ íà âûäåëåíèè îïàñíîé ðàäèàöèè.

1

2

3

4

5

6

English

INTRODUCTION ......................................... 2

Supplied accessories........................................ 5

FUNCTIONAL OVERVIEW ......................... 6

Top and front panels (DVR-S300).................. 6

Rear panel (DVR-S300).................................. 7

Rear panel (NX-SW300)................................. 8

Rear panel (NX-SW301)................................. 8

Remote control (For DVR-S300).................... 9

CONNECTIONS ........................................ 11

Roles and layout of the speakers................... 11

Placing the center speaker............................. 12

Placing the front/surround speakers.............. 13

Placing the subwoofer................................... 13

SYSTEM CONNECTIONS........................ 14

Connecting the speakers (DVX-S301).......... 14

Connecting the speakers (DVX-S302).......... 15

Connecting the speakers (DVX-S303).......... 16

Connecting the speaker cables ...................... 17

Connecting the subwoofer............................. 17

Connecting the DVD receiver and the

subwoofer .................................................. 18

OTHER CONNECTIONS........................... 19

Connecting a TV ........................................... 19

Connecting the FM/AM antennas................. 20

Connecting external AV components ........... 21

Connecting digital audio components........... 22

GETTING STARTED................................. 23

Inserting batteries into the remote control .... 23

Using the remote control............................... 23

Setting a TV .................................................. 24

Setting language preferences......................... 26

Setting speaker channels ............................... 27

DISC OPERATION ................................... 28

Playing discs.................................................. 28

Basic playback controls................................. 28

Selecting various repeat shuffle functions..... 29

Shuffle ........................................................... 29

Other operations for video playback

(DVD/VCD/SVCD)................................... 30

Playing MP3/JPEG/DivX® discs.................. 33

Playing Super Audio CDs ............................. 34

Special features for picture disc playback..... 35

DVD SETUP MENU OPTIONS................. 36

General setup menu ....................................... 36

Audio setup menu.......................................... 38

Video setup menu.......................................... 39

Preference setup menu................................... 41

TUNER OPERATIONS ............................. 44

Tuning radio stations ..................................... 44

Presetting radio stations................................. 44

SOUND CONTROLS ................................ 46

Selecting surround sound .............................. 46

Selecting digital sound effects....................... 46

Adjusting the treble/bass level....................... 46

Adjusting the volume level............................ 47

Night listening mode ..................................... 47

Switching to active mode .............................. 47

Switching to standby mode ........................... 47

OTHER FUNCTIONS................................ 48

Setting remote control codes ......................... 48

Controlling other components....................... 48

Dimming the display screen .......................... 49

Setting the sleep timer ................................... 49

Recording on an external AV component ..... 49

TROUBLESHOOTING.............................. 50

GLOSSARY .............................................. 52

SPECIFICATIONS .................................... 54

CONTENTS

1.INTRODUCTION

2.PREPARATION

3.BASIC OPERATION

4.OPERATIONS

5.ON-SCREEN MENU

6.OTHER FEATURES

INTRODUCTION

2

Thank you for purchasing this unit. This Owner’s Manual

explains the basic operation of this unit.

Notes about discs

– This receiver is designed for use with the following

discs: Super Audio CD (Super Audio CD), DVD-

Video, Video CD, Super Video CD, Audio CD, CD-

R, CD-RW, DVD-Audio, DVD+RW, DVD+R,

DVD-R, DVD-RW and DVD-RW (VR format).

This receiver can play:

– MP3 and picture (Kodak, JPEG) files recorded on

CD-R(W).

– JPEG/ISO 9660 format

– Maximum 30 character display

–DivX

®

disc on CD-R[W]/DVD+R[W]/

DVD-R[W](3.11, 4.x and 5.x)

– CD-R, CD-RW and DVD-RW (VR format) cannot

be played unless finalized.

– Some discs cannot be played depending on the

recording conditions, such as the PC environment

and application software. The characteristics and

condition of some discs; materials, scratches,

curvature, etc, may result in playback failure.

– Be sure to use only CD-R and CD-RW discs made

by reliable manufacturers.

– Do not use any non-standard shaped discs (heart-

shaped, etc.).

– Do not use discs with tape, seals, or paste on their

surface. Doing so may damage this receiver.

– Do not use discs affixed with labels printed by a

commercially available label printer.

Cleaning discs

– When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not

wipe in a circlar motion.

– Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic spray

intended for analog records.

Avoid high temperatures, moisture, water

and dust

– Do not expose the system, batteries or discs to

humidity, rain, sand or excessive heat (caused by

heating equipment or direct sunlight). Always keep

the disc tray closed to avoid getting dust on the lens.

Avoid condensation problem

– The lens may cloud over when the receiver is

suddenly moved from cold to warm surroundings,

making it impossible to play a disc. Leave the

receiver in the warm environment until the moisture

evaporates.

Disc care

– Write only on the printed side of a CD-R/

CD-RW and only with a soft felt-tipped pen.

– Handle the disc by its edge; do not touch the

surface.

Cabinet care

– Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution containing

alcohol, spirits, ammonia, or abrasives.

Choosing a suitable location

– Place the receiver on a flat, hard, and stable surface.

INTRODUCTION

Notes

3

INTRODUCTION

English

INTRODUCTION

1

Region codes

The unit is designed to support the Region Management

System. Check the region code number on the disc

package. If the number does not match the unit’s region

number (see the table below or the back of the unit), the

unit may be unable to play the disc.

Sound field features

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, “MLP

Lossless” and the double-D symbol are

trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are

registered trademarks of Digital Theater

Systems, Inc.

“DivX”, “DivX Certified”, and associated logos

are trademarks of DivXNetworks, Inc and are

used under license.

Destination

Region

code of

DVR-S300

Playable

discs

U.S.A. and

Canada models

U.K. and Europe

models

Australia

model

Korea, Asia and

Taiwan models

1 1

ALL

2 2

ALL

4 4

ALL

3 3

ALL

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Active Servo Processing Subwoofer System with built-in

power amplifier.

This subwoofer system (NX-SW300, NX-SW301) employes

Advanced YAMAHA Active Servo Technology which

YAMAHA has developed for reproducing higher quality

super-bass sound. This super-bass sound adds a more

realistic, theater-in-the-home effect to your stereo syetem.

4

INTRODUCTION

DVX-S301 DVX-S302

DVD receiver

(DVR-S300)

Subwoofer

(NX-SW301)

Center speaker

(NX-C301)

Front/Surround

speakers (x4)

(NX-S301)

DVD receiver

(DVR-S300)

Subwoofer

(NX-SW301)

Center speaker

(NX-C302)

Front/Surround

speakers (x4)

(NX-S302)

5

INTRODUCTION

English

INTRODUCTION

1

DVX-S303

■ Supplied accessories

DVD receiver

(DVR-S300)

Subwoofer

(NX-SW300)

Center speaker

(NX-C302)

Front/Surround

speakers (x 4)

(NX-S302)

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU

SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV

INPUT

MUTE

BASS

ENTER

TOP MENU/RETURN

ON SCREEN

PROG

REPEAT A - B

SHUFFLE

SCAN

PAGE

DIMMER

POWER

SLEEP

NIGHT

TV

System control cable

(4 m )

FM wire antenna

Video pin cable

Remote control

AM loop antenna

Speaker cables

(5 m x 3)

(15 m x 2)

Fasteners (2 sets)

Batteries (x 2)

Base(x 4)

(For NX-S302)

Screws (x 8)

Washers (x 8)

(For NX-S302)

Non-skid pad (1 set)

(For NX-SW301)

FUNCTIONAL OVERVIEW

6

■ Top and front panels (DVR-S300)

1 STANDBY/ON

Turns on the DVD receiver, or sets it to the standby

mode (see “Auto eco power standby mode” on

page 28).

2

Opens/closes the disc tray.

3 b / a , w / f

DVD/CD mode: selects the previous/next track or

chapter. Press and hold to fast forward or fast reverse.

TUNER mode: tunes the radio preset up/down.

4 e

DVD/CD mode: pauses disc playback.

5 INPUT

Selects and input source or sets the priority level for

the audio input signals.

6 VOLUME

Adjusts the volume level.

7 Disc tray

Load the disc in the disc tray.

8 System display panel

Shows information about the operational status of the

unit.

MULTI

Lights up when you play a multi-channel audio

source.

DOWNMIX

Lights up when you play discs that allow down mixing

of multi-channel audio sources.

It does not light up for discs that prohibit down

mixing, even if you play a multi-channel audio source.

9 h

DVD/CD mode: starts disc playback.

TUNER mode: starts preset radio station installation

in Plug & Play mode.

0 s

Exits an operation.

DVD/CD mode: stops playback.

TUNER mode: erases a preset radio station in Preset

mode if held more than two seconds, or stops preset

radio station installation in Auto Preset mode.

A Remote control sensor

Point the remote control towards this sensor.

B Head phone jack

Connects headphones.

FUNCTIONAL OVERVIEW

654321

B

A

0

9

8

7

FUNCTIONAL OVERVIEW

7

INTRODUCTION

1

English

■ Rear panel (DVR-S300)

(U.K. and Europe models)

1 AC power cord

Connect to a standard AC outlet.

2 AV MONITOR OUT terminal

(U.K. and Europe models only)

Connect to your TV (see page 19).

3 VIDEO output terminal

Connect to the video (composite) jack on your TV

(see page 19).

4 COMPONENT VIDEO OUT terminal

Connect the the Y P

B/CB PR/CR jacks on your TV (see

page 19).

5 LINE OUT terminal

Connect to the AUDIO IN jacks on your VCR.

6 TV IN terminal

Connect to the corresponding AUDIO OUT jacks on

your TV (see page 19).

7 AUX IN terminal

Connect to the AUDIO OUT jacks on your VCR or

cassette deck.

8 FM ANT terminal

Connect the FM antenna.

9 GND and AM ANT terminals

Connect the AM loop antenna.

0 S VIDEO output terminal

Connect to the S-video jack on your TV or VCR.

A OPTICAL DIGITAL IN terminal

Connect to the DIGITAL OUT jack on your digital

audio component.

B SYSTEM CONNECTOR terminal

Connect the subwoofer.

SYSTEM

CONNECTOR

AUX INTV INLINE OUT

S VIDEO

AV MONITOR OUT

(DVD ONLY)

VIDEO

OPTICAL

COMPONENT

Y

P

R PB

PCM/DTS

q

DIGITAL

DIGITAL INVIDEO OUT (DVD ONLY)

FM

ANT

AM

ANT

GND

TO SUBWOOFER

75Ω UNBAL

L

R

9821 4 5 6 73

B0A

FUNCTIONAL OVERVIEW

8

■ Rear panel (NX-SW300)

1 SYSTEM CONNECTOR terminal

Connect to the DVD receiver.

2 SPEAKER terminals

Connect to the speakers.

3 AC power cord

Connect to a standard AC outlet.

■ Rear panel (NX-SW301)

1 SYSTEM CONNECTOR terminal

Connect to the DVD receiver.

2 SPEAKER terminals

Connect to the speakers.

3 AC power cord

Connect to a standard AC outlet.

1 23

12

3

FUNCTIONAL OVERVIEW

9

INTRODUCTION

1

English

■ Remote control

(For DVR-S300)

For details on how to use the remote control, see page 23.

1 POWER (TV)

Turns on the TV, or sets it to the standby mode.

2 DIMMER

Selects different levels of brightness for the display

panel.

3 Numeric keypad (0 – 9)

Enters a track/title number of the disc.

Enters a number of a preset radio station.

4 REPEAT

Selects various repeat modes.

5 PROG

DVD/CD mode: starts programming.

TUNER mode: starts automatic/manual preset

programming if held for more than two seconds.

6 TOP MENU/RETURN

Returns to the previous menu.

Displays the top-level disc menu

(if available).

7 Cursors ( / / / )

Selects movement direction in the menu.

TUNER mode: press left or right to tune the radio

frequency.

TUNER mode: press up or down to select auto

tuning.

8 ENTER (OK)

Confirms a selection.

9 MENU

Enters or exits the disc contents menu.

For VCD version 2.0 only:

In stop mode, turns on/off playback control (PBC)

mode.

During playback, returns to the main menu.

0 s

Exits an operation.

DVD/CD mode: stops playback.

DVD/CD mode: holding down the button will open

and close the disc tray.

TUNER mode: erases a preset radio station if held

for more than two seconds.

A d PRESET u ( b / a )

DVD/CD mode: selects the previous/next track or

chapter. Press and hold to fast forward or fast

reverse.

TUNER mode: press to select a preset radio station.

B SUBTITLE

Selects a subtitle language.

Note

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU

SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV

INPUT

MUTE

BASS

ENTER

TOP MENU/RETURN

ON SCREEN

PROG

REPEAT A - B

SHUFFLE

SCAN

PAG E

DIMMER

POWER

SLEEP

NIGHT

TV

P

Q

R

S

t

U

V

W

X

Y

7

8

9

0

A

B

C

D

E

F

G

H

1

2

3

4

5

6

I

J

K

L

N

O

M

FUNCTIONAL OVERVIEW

10

C AUDIO

Selects an audio language (DVD) or an audio channel

(VCD).

D TV VOL (+ / –)

Adjusts the TV volume.

E TV CH (+ / –)

Switches the TV channel.

F TV INPUT

Switches the TV input.

G EFFECT

Selects a sound effect.

H Input selection buttons

Selects the appropriate active source mode.

TV mode: switches to TV input.

AUX mode: switches to AUX ANALOG/AUX

DIGITAL input.

TUNER mode: switches tuner (FM/AM) input.

DVD/CD mode: switches to DVD/CD mode.

I POWER ( )

Turns on the DVD receiver, or sets it to the standby

mode.

J SLEEP

Sets the sleep timer.

K SCAN

Scans each track/chapter on the disc.

L PAGE

Turns the pages of DVD-Audio still pictures.

M REPEAT A-B

Repeats a specific section on a disc.

N SHUFFLE

Plays tracks in random order.

O ON SCREEN

Displays the current status or disc information.

P SET UP

Enters or exits the system setup menu.

Q h

DVD/CD mode: starts disc playback.

R e

DVD/CD mode: pauses disc playback.

S NIGHT

Turns the Night mode on or off.

T ZOOM

Enlarges or reduces the TV screen picture.

U ANGLE

Selects a DVD disc camera angle (if available).

V VOL (+ / –)

Adjusts the volume level.

W TRE/BASS

Selects the TREBLE (high tone) or BASS (low tone)

sound mode.

Use the VOLUME control to change the tone level.

X MUTE

Mutes or restores the volume.

Y SURR

Selects multi-channel surround or stereo mode.

CONNECTIONS

11

English

PREPARATION

2

■ Roles and layout of the speakers

To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly.

The following show the recommended layout of the speakers.

For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance

from the listening position.

1 Front Speakers (L, R)

Place the front left/right speakers on both sides of your TV at equal distances.

Main roles: Produces front channel (stereo) sounds and effect sounds.

2 Center Speaker

Place on top of the TV or inside the TV rack so that the speaker and TV are aligned vertically.

Main role: Produces sounds oriented toward the center of the screen such as dialogues or vocal sounds.

3 Surround Speakers (L, R)

Place the surround left/right speakers behind the listening position. (For NX-S301, we recommend placing them at a height of 1.8 m

(6 feet) and pointing them at the listening position.)

Main roles: Produces surround sounds and effect sounds.

4 Subwoofer

Place the subwoofer near a front speaker and turn it slightly toward the center of the room to reduce wall reflections.

Main roles: Produces bass sounds and low frequency (LFE) sounds contained in Dolby Digital or DTS.

To avoid magnetic interference, do not position the front speakers too close to your TV.

Allow adequate ventilation around the DVD receiver and subwoofer.

Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location.

To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.

CONNECTIONS

1

2

3

4

3

+

–

+

–

DVD receiver

Center speaker

Front

speaker (R)

Surround

speaker (L)

Subwoofer

Surround

speaker (R)

Front

speaker (L)

DVX-S301

1

2

4

3

DVD receiver Center speaker

Front

speaker (R)

Subwoofer

Front

speaker (L)

Surround

speaker (R)

Surround

speaker (L)

DVX-S302/DVX-S303

Note

CONNECTIONS

12

■ Placing the center speaker

When placing the center speaker on top of the TV, use the

supplied fasteners to secure the speaker.

1 Peel off the seals on one side of the fasteners and

attach them to the bottom of the center speaker.

2 Peel off the seals on the other side of the fasteners and

attach them to the top of the TV.

– Do not place the speaker on the TV if the top of the

TV is uneven or narrower than the bottom surface

of the speaker. Doing so may cause the speaker to

fall. In this case, place the speaker inside a TV rack

or on a level floor.

– Before attaching the fasteners to the TV, clean the

surface with a dry cloth. A dirty or wet surface may

weaken the adhesive force and cause the speaker to

fall.

– Do not touch the bonding surfaces of the fasteners

after peeling off the seals. Doing so may weaken

the adhensive force and cause the speaker to

fall.this installation. Use metric screw threads only.

Attaching to a wall

You can attach the speakers to a wall using commercially

available screws (Diameter: 3.5 to 4 mm, Length: 25 mm

or more). Each speaker requires two screws.

1 Install two screws in the wall where you want to place

the speaker.

2 Hang the speaker on the screws using the holes in the

back of the speaker.

– To attach a speaker to a wall using screws, the wall

must be firm. Do not attach a speaker to a wall that

is made of weak materials such as plaster or

veneered woods. Doing so may cause the speaker

to fall.

– When connectiong the speakers, fix the speaker

cables in place so that cables do not loosen. If your

foot or hand accidentally gets caught on a loose

speaker cable, the speaker may fall.

– After attaching each speaker, check that the

speaker is fixed securely. YAMAHA will bear no

reponsibility for any accidents caused by improper

installations.

Notes

Fastener

Peel off

the seal

NX-C301

Fastener

Peel off

the seal

NX-C302

Notes

+

–

5 mm

Screws (3.5

to 4 mm dia.,

commercially

available)

20 mm or more

110 mm

NX-C301

+

–

5 mm

Screws (3.5

to 4 mm dia.,

commercially

available)

20 mm or more

151 mm

NX-C302

CONNECTIONS

13

English

PREPARATION

2

■ Placing the front/surround

speakers

Attaching to a wall

You can attach the speakers to a wall using commercially

available screws (Diameter: 3.5 to 4 mm, Length: 25 mm

or more). Each speaker requires two screws.

1 Install two screws in the wall where you want to place

the speaker.

2 Hang the speaker on the screws using the holes in the

back of the speaker.

– To attach a speaker to a wall using screws, the wall

must be firm. Do not attach a speaker to a wall that

is made of weak materials such as plaster or

veneered woods. Doing so may cause the speaker

to fall.

– When connectiong the speakers, fix the speaker

cables in place so that cables do not loosen. If your

foot or hand accidentally gets caught on a loose

speaker cable, the speaker may fall.

– After attaching each speaker, check that the

speaker is fixed securely. YAMAHA will bear no

reponsibility for any accidents caused by improper

installations.

Hanging on a wall (NX-S301)

You can hang the speakers on a wall using a commercially

available bracket and screws (Diameter: 6 mm). Attach a

bracket firmly to the rear of the speakers using screws.

Then mount a screw on the wall where the speaker is to be

hung and hook the speaker securely onto the mounted

screws.

Do not use screw threads neasured in inches for this

installation. Use metric screw threads only.

Attaching the base

Attach the base to the bottom of the front/surround

speakers (NX-S302) with the supplied base mounting

screws as shown below.

Placing the speakers (NX-S302) on the places such as hard

wooden floor may scratch the surface of the floor.

■ Placing the subwoofer

Attach the non-skid pads to the bottom of the subwoofer

(NX-SW301), and then place the subwoofer on a level

hard floor.

Using non-skid pads prevents the subwoofer from sliding

when it vibrates, and ensure quality sound production.

Notes

Note

+

–

5 mm

Screws (3.5

to 4 mm dia.,

commercially

available)

20 mm or more

40 mm

NX-S301

Note

Base

mounting

screws

NX-S302

Base

Washer

Peel off

the seal

SYSTEM CONNECTIONS

14

■ Connecting the speakers (DVX-S301)

– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.

– Please refer to the pages below for detailed information on how connect each speaker.

SYSTEM CONNECTIONS

Notes

SYSTEM

CONNECTOR

TO SUBWOOFER

L

R

+

–

+

–

+

–

+

–

+

–

Front speaker (R)NX-S301

(page 17)

Surround

speaker (R)

NX-S301

(page 17)

Center speaker

NX-C301

(page 17)

Subwoofer

(NX-SW301)

DVD receiver (DVR-S300)

Front speaker (L) NX-S301

(page 17)

Surround

speaker (L)

NX-S301

(page 17)

Tab

Red

Green

Tab

Gray

White

Blue

SYSTEM CONNECTIONS

15

English

PREPARATION

2

■ Connecting the speakers (DVX-S302)

– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.

– Please refer to the pages below for detailed information on how connect each speaker.

Notes

SYSTEM

CONNECTOR

TO SUBWOOFER

L

R

+

Front speaker (R)

NX-S302

(page 17)

Surround

speaker (R)

NX-S302

(page 17)

Center speaker

NX-C302

(page 17)

Subwoofer

NX-SW301

(page 17)

DVD receiver (DVR-S300)

Front speaker (L)

NX-S302

(page 17)

Surround

speaker (L)

NX-S302

(page 17)

Tab

Red

Green

Tab

Gray

White

Blue

Black

Red

Black

Red

Black

SYSTEM CONNECTIONS

16

■ Connecting the speakers (DVX-S303)

– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.

– Please refer to the pages below for detailed information on how to connect each speaker.

Notes

FRONT

CENTE R

SURROUN D

SYSTEM

CONNECTOR

TO SUBWOOFER

L

R

FRONT

CENTER

SURROUND

SPEAKERS

+

Subwoofer

NX-SW300

(page 17)

DVD receiver (DVR-S300)

Front speaker

(R)

NX-S302

(page 17)

Front speaker

(L)

NX-S302

(page 17)

Center speaker

NX-C302

(page 17)

Surround

speaker (R)

NX-S302

(page 17)

Surround

speaker (R)

NX-S302

(page 17)

To remove the speaker

cable plugs, see

“Connecting the

subwoofer” on page 17.

Red

Black

Red

Sayfa yükleniyor ...

Yamaha DVX-S301 El kitabı

Bu kılavuz için de uygundur

Yamaha DVX-S301 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler