Samsung HT-J5150 Kullanım kılavuzu

5.1CH Blu-ray™

Home Entertainment System

User manual

HT-J5150

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

HT-J5150_TK-0309.indd 1HT-J5150_TK-0309.indd 1 2015-03-09  3:37:222015-03-09  3:37:22

2 - English

Safety Information

~

The slots and openings in the cabinet and in the back

or bottom are provided for necessary ventilation. To

ensure reliable operation of this apparatus, and to

protect it from overheating, these slots and openings

must never be blocked or covered.

- Do not place this apparatus in a confined space,

such as a bookcase, or built-in cabinet, unless

proper ventilation is provided.

- Do not place this apparatus near or over a radiator

or heat register, or where it is exposed to direct

sunlight.

- Do not place vessels (vases etc.) containing water

on this apparatus. A water spill can cause a fire or

electric shock.

~

Do not expose this apparatus to rain or place it near

water (near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, etc.). If this apparatus accidentally gets wet,

unplug it and contact an authorized dealer immediately.

~

This apparatus uses batteries. In your community,

there might be environmental regulations that require

you to dispose of these batteries properly. Please

contact your local authorities for disposal or recycling

information.

~

Do not overload wall outlets, extension cords or

adaptors beyond their capacity, since this can result in

fire or electric shock.

~

Route power-supply cords so that they are not likely to

be walked on or pinched by items placed on or against

them. Pay particular attention to cords at the plug end,

at wall outlets, and the point where they exit from the

apparatus.

~

To protect this apparatus from a lightning storm, or

when it is left unattended and unused for long periods

of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage

to the set due to lightning and power line surges.

~

Before connecting the AC power cord to the DC

adaptor outlet, make sure the voltage designation of

the DC adaptor corresponds to the local electrical

supply.

~

Never insert anything metallic into the open parts

of this apparatus. Doing so may create a danger of

electric shock.

~

To avoid electric shock, never touch the inside of this

apparatus. Only a qualified technician should open this

apparatus.

~

Make sure to plug the power cord in until it is firmly

seated. When unplugging the power cord from a wall

outlet, always pull on the power cord's plug. Never

unplug by pulling on the power cord. Do not touch the

power cord with wet hands.

~

If this apparatus does not operate normally - in

particular, if there are any unusual sounds or smells

coming from it - unplug it immediately and contact an

authorized dealer or service centre.

~

Maintenance of Cabinet.

- Before connecting other components to this

product, be sure to turn them off.

- If you move your product suddenly from a cold place

to a warm place, condensation may occur on the

operating parts and lens and cause abnormal disc

playback. If this occurs, unplug the product, wait for

two hours, and then connect the plug to the power

outlet. Then, insert the disc, and try to play back

again.

~

Be sure to pull the power plug out of the outlet if the

product is to remain unused or if you are leaving the

house for an extended period of time (especially when

children, elderly, or disabled people will be left alone in

the house).

- Accumulated dust can cause an electric shock, an

electric leakage, or a fire by causing the power cord

to generate sparks and heat or the insulation to

deteriorate.

~

Contact an authorized service centre for information

if you intend to install your product in a location with

heavy dust, high or low temperatures, high humidity,

chemical substances, or where it will operate 24 hours

a day such as in an airport, a train station, etc. Failing

to do so may lead to serious damage of your product.

~

Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or

equipment damage. (Class l Equipment only.)

~

To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently, the

wall outlet and power plug must be readily accessible

at all times.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that important

literature concerning operation and

maintenance has been included with

this product.

HT-J5150_TK-0309.indd 2HT-J5150_TK-0309.indd 2 2015-03-09  3:37:262015-03-09  3:37:26

3 - English

Safety Information

~

Do not allow children to hang on the product.

~

Store the accessories (battery, etc.) in a location safely

out of the reach of children.

~

Do not install the product in an unstable location such

as a shaky self, a slanted floor, or a location exposed

to vibration.

~

Do not drop or strike the product. If the product is

damaged, disconnect the power cord and contact a

service centre.

~

To clean this apparatus, unplug the power cord from

the wall outlet and wipe the product using a soft,

dry cloth. Do not use any chemicals such as wax,

benzene, alcohol, thinners, insecticide, air fresheners,

lubricants, or detergent. These chemicals can damage

the appearance of the product or erase the printing on

the product.

~

Do not expose this apparatus to dripping or splashing.

Do not put objects filled with liquids, such as vases on

the apparatus.

~

Do not dispose of batteries in a fire.

~

Do not plug multiple electric devices into the same wall

socket. Overloading a socket can cause it to overheat,

resulting in a fire.

~

There is danger of an explosion if you replace the

batteries used in the remote with the wrong type of

battery. Replace only with the same or equivalent type.

WARNING :

~

TO PREVENT THE SPREAD OF FIRE,

KEEP CANDLES AND OTHER ITEMS

WITH OPEN FLAMES AWAY FROM

THIS PRODUCT AT ALL TIMES.

~

To reduce the risk of fire or electric

shock, do not expose this appliance to rain or

moisture.

CLASS 1 LASER PRODUCT

This product is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

CAUTION :

~

INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED, AVOID EXPOSURE TO

BEAM.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

HT-J5150_TK-0309.indd 3HT-J5150_TK-0309.indd 3 2015-03-09  3:37:272015-03-09  3:37:27

4 - English

Contents

GETTING STARTED

5 Accessories

5 Speaker Components

6 Front Panel

6 Rear Panel

7 Remote Control

CONNECTIONS

8 Connecting the Speakers

11 Connecting to a TV and External Devices

SETTINGS

12 The Initial Settings Procedure

12 The Home Screen at a Glance

13 Accessing the Settings Screen

13 Settings Menu Functions

16 Radio Setup

17 Upgrading Software

PLAYING CONTENT

18 Switching the Source Device

18 Playing Commercial Discs

18 Playing a Disc with User Recorded Content

19 Playing Files on a USB Device

20 Controlling Video Playback

22 Playing a Pre-Recorded Commercial Audio Disc

22 Controlling Music Playback

23 Playing Photo Content

24 Using the Special Effects Remote Control

Buttons

APPENDIX

25 Additional Information

26 Disk and Format Compatibility

31 Troubleshooting

34 Specifications

35 Licences



Figures and illustrations in this User Manual

are provided for reference only and may

differ from actual product appearance.



An administration fee may be charged if

either

a. an engineer is called out at your request

and there is no defect in the product (i.e.

where you have failed to read this user

manual)

b. you bring the unit to a repair centre and

there is no defect in the product (i.e.

where you have failed to read this user

manual).



The amount of such administration charge

will be advised to you before any work or

home visit is carried out.

HT-J5150_TK-0309.indd 4HT-J5150_TK-0309.indd 4 2015-03-09  3:37:282015-03-09  3:37:28

5 - English

Getting Started

Check the box for the accessories and speaker components listed or shown below.

Accessories

~

Remote Control

~

Batteries (AAA size)

~

User Manual

Power Cable FM Antenna

Speaker Components

Screw (5x15) x 16 Centre

Front x 2

Surround x 2

Stand x 4 Stand Base x 4 Speaker Cable x 4 Subwoofer

Getting Started

HT-J5150_TK-0309.indd 5HT-J5150_TK-0309.indd 5 2015-03-09  3:37:282015-03-09  3:37:28

6 - English

Getting Started

Front Panel

DISPLAY ICONS

FUNCTION STOP PLAY/PAUSE

OPEN/

CLOSE

VOLUME

CONTROL

POWER

5V 0.5A

USBREMOTE CONTROL SENSOR

DISPLAY

DISC TRAY

✎

When the product is on, do not let children touch the product's surface. It will be hot.

✎

To upgrade the product's software through the USB jack, you must use a USB flash drive.

✎

When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the /

6

button

on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and

then press the

E

button.

✎

If you are playing content from a USB device on your TV through the home cinema, you cannot select the

BD/DVD mode with the FUNCTION button. To select the BD/DVD mode, stop the content you are playing

on the TV, and then select the BD/DVD mode.

Rear Panel

SURROUND

COOLING FAN

* FM ANTENNA

AUX IN

HDMI OUT

SPEAKER OUTPUT

CONNECTORS

POWER CORD EXTERNAL DIGITAL

AUDIO IN (OPTICAL)

* Connecting the FM Antenna

1. Connect the supplied FM antenna to the FM ANT Jack.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a

wall or other rigid surface.

✎

Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation.

Do not obstruct the cooling fan or ventilation holes.

✎

This product does not receive AM broadcasts.

HT-J5150_TK-0309.indd 6HT-J5150_TK-0309.indd 6 2015-03-09  3:37:302015-03-09  3:37:30

7 - English

Getting Started

Remote Control

Tour of the Remote Control

Turn the product on and off.

Adjust the volume.

Press numeric buttons to operate

options.

Press to skip backwards or forwards.

Selects the disc subtitle language.

Press to move to the Home screen.

Select on-screen menu items

and change menu values.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Press to view the disc menu.

Press to use the Tools menu.

Press to play a disc or files.

Press to direct the audio signal to the

home cinema speakers or TV speaker.

(See page 24)

Select the desired DSP/EQ audio

mode.

Press to stop a disc or files.

Cut off the sound temporarily.

Use the RDS function to

receive FM stations.

Press to search backwards or

forwards.

Press to pause playing.

Allows you to repeat a title,

chapter, track or disc.

Use to enter the Popup menu/

Title menu.

Select MONO or STEREO for radio

broadcasts.

Search for active FM stations and

to change channels.

Use to display the playback

information when playing

a Blu-ray/DVD disc or files.

To open and close the disc tray.

Press to exit the menu.

Press to select Home Cinema's

mode. (BD/DVD, D. IN, AUX,

etc.).

Use to set a preset radio frequency.

TOOLS

RETURN

EXIT

INFO

SUBTITLE HOME

REPEAT

1

2

3

7

89

DISC MENU

PTY - PTY SEARCH PTY +

RDS DISPLAY TA

TITLE MENU

0

POPUP

4

56

MUTE

MO/ST

TUNER

MEMORY

DSP/EQTV SOUND

ABCD

TUNING

DOWN

UP

VOLUME

-

+

FUNCTION

Installing batteries in the Remote Control

✎

Make sure to match the "+" and "–" ends of the batteries with

the diagram inside the compartment.

✎

Assuming typical usage, the batteries last for about one year.

✎

The remote control can be used up to approximately

7 meters from the product in a straight line.

Battery size: AAA

HT-J5150_TK-0309.indd 7HT-J5150_TK-0309.indd 7 2015-03-09  3:37:322015-03-09  3:37:32

8 - English

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Surround (L)

Surround (R)

Product

Centre

Subwoofer

Front (L)

Front (R)

Position of the product

Place it on a stand or cabinet

shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be

located about 2.5 to 3 times the

TV's screen size away from the

TV. For example, if you have a 46

inch screen, locate the listening

position 2.92 to 3.50 meters from

the screen.

Front Speakers

Place these speakers in front of your listening position, facing inwards (about

45°) toward you. Place the front speakers so that their tweeters will be at the

same height as your ear. Align the front face of the front speakers with the front

face of the centre speaker or place them slightly in front of the centre speakers.

Centre Speaker

It is best to install the centre speaker at the same height as the front speakers.

You can also install it directly over or under the TV.

Surround Speakers

Place these speakers to the side of your listening position. If there isn't enough

room, place these speakers so they face each other. Position them about 60 to

90cm above your ear, facing slightly downward.

* Unlike the front and centre speakers, the surround speakers are used mainly

for sound effects. Sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

* The appearance of your speakers may differ from the illustrations in this manual.

* Each speaker has a coloured label on its back or underside. Each cable has a single coloured band

near its end. Match the band on each cable to the speaker label by colour, and then connect the

cable to the speaker. See page 9 for exact instructions.

HT-J5150_TK-0309.indd 8HT-J5150_TK-0309.indd 8 2015-03-09  3:37:342015-03-09  3:37:34

9 - English

Connections

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and connect

it to the Stand.

2. Use the driver to combine the screws on the 3

marked holes.

3. Straighten a supplied speaker wire and put in

the hole on the centre of Stand Base.

4. Connect the upper Speaker to the assembled

Stand.

5. Insert a screw clockwise into the hole on the

rear of the speaker using a screwdriver.

And then connect a speaker cable.

6. This is the appearance after the speaker is

installed.

Follow this steps to install other speaker.

Speaker Cable Connections

* Front/

Surround Speakers

only

1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each

bundle to the coloured sticker on the bottom of each speaker.

2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of

the speaker plugs to the colours of the speaker jacks. When connecting, make sure to match label colour

on the back of speaker.

5

2

4

6

1

3

Stand Base

Stand

Speaker

Stand

HT-J5150_TK-0309.indd 9HT-J5150_TK-0309.indd 9 2015-03-09  3:37:352015-03-09  3:37:35

10 - English

Connections

SURROUND

Front Speaker (R)

Subwoofer

Centre Speaker

Front Speaker (L)

Surround Speaker (L)

Surround Speaker (R)

✎

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

| CAUTION |



If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever

you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each

speaker on a screw or nail.



Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien

substances into the duct (hole) of the subwoofer speaker.



Do not hang the subwoofer on the wall by the duct (hole).

HT-J5150_TK-0309.indd 10HT-J5150_TK-0309.indd 10 2015-03-09  3:37:362015-03-09  3:37:36

11 - English

Connections

Connecting to a TV and External Devices

OPTICAL OUT

AUDIO OUT

HDMI IN (ARC)

SURROUND

Method 1 Method 2

R

Red

W

White

External Devices

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack

on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema with only

this cable connected. See page 14 in this manual and the section on ARC in your TV's user's manual for

details.

Connecting to External Devices

Two methods of connecting external devices to your home cinema are explained below.

Method 1 AUX IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on

the external analogue component.



Select the AUX mode.

~

Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite

Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the Optical

Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital

optical cable.



Select the D. IN mode.

✎

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

✎

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

✎

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

Selecting an External Device to Use

To select an external device after you have connected it, press the FUNCTION button. Each time you press the

button, the mode changes in this order : BD/DVD



D. IN



AUX



FM

HT-J5150_TK-0309.indd 11HT-J5150_TK-0309.indd 11 2015-03-09  3:37:372015-03-09  3:37:37

12 - English

Settings

The Initial Settings Procedure

~

The Home menu will not appear if you do not

configure the initial settings.

~

The OSD (On Screen Display) may change in

this product after you upgrade the software

version.

~

The access steps may differ depending on the

menu you selected.

1. Turn on your TV after connecting the product,

and then turn on the product. When you turn

on the product for the first time, the product

automatically displays the Setup Language

screen.

2. Press the ▲▼ buttons to select the desired

language, and then press the

E

button.

3. The TV Aspect Ratio screen appears. Press

the ▲▼ buttons to select a TV aspect ratio, and

then press the

E

button.

You have four choices:

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and 4:3 pictures (the old, standard format) in 4:3

pillar box format with black bars on the left and

right.

16:9 Full - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen,

analogue TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in letter box format that retains

the 16:9 aspect ratio but puts black bars above

and below the picture.

4:3 Pan-Scan - For older, standard screen,

analogue TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in Pan-Scan format that fills

the screen, but cuts off the left and right sides of

the picture and enlarges the middle vertically.

4. The "Initial settings completed." screen

appears, and then the Home screen appears.

✎

If you want to display the Setup screen again

and make changes, select the Reset option. (See

page 16)

✎

If you use an HDMI cable to connect the product

to an Anynet+ (HDMI-CEC)-compliant Samsung

TV and 1.) You have set the Anynet+ (HDMI-CEC)

feature to On in both the TV and the product and

2.) You have set the TV to a language supported

by the product, the product will select that

language as the preferred language automatically.

The Home Screen at a Glance

PLAY DISC

Change

Device

Function

No Disc

Settings

PHOTOS VIDEOS MUSIC

1

345

2

1

PLAY DISC

The disc currently in the tray is displayed.

Press

E

to start playing the disc.

2

PHOTOS/VIDEOS/MUSIC

Play photos, videos, or music content from a

Disc or a USB device.

3

Change Device

Displays a list of external devices connected to the

main unit. Switch to the desired device.

4

Function

Use for switching to an external device or to

the radio. You can use the remote control’s

FUNCTION button and the main unit’s button

for mode switching.

HT-J5150_TK-0309.indd 12HT-J5150_TK-0309.indd 12 2015-03-09  3:37:392015-03-09  3:37:39

13 - English

Settings

5

Settings

Set various functions to suit your personal

preferences.

Accessing the Settings Screen

1. Select Settings on the Home screen, and then

press

E

. The Settings screen appears.

Settings

Picture

Sound

System

Language

Security

Support

TV Aspect Ratio : 16:9 Original

BD Wise : Off

Resolution : Auto

Movie Frame (24 fps) : Off

HDMI Colour Format : Auto

HDMI Deep Colour : Off

Progressive Mode : Auto

2. To access the menus, sub-menus, and options

on the Settings screen, please refer to the

remote control illustration. (See below)

✎

If you leave the product in the stop mode for more

than 5 minutes without using it, a screen saver

appears on your TV. If the product is left in the

screen saver mode for more than 20 minutes, the

power automatically turns off.

Buttons on the Remote Control Used

for the Settings Menu

TOOLS

RETURN

EXIT

INFO

SUBTITLE HOME

REPEAT

TUNER

24

3

1

HOME Button : Press to move to the Home

screen.

2

RETURN Button : Press to return to the

previous menu.

3

E

(

ENTER) / DIRECTION Button :

~

Press ▲▼◄► to move the cursor or

select an item.

~

Press the

E

button to activate the

currently selected item or confirm a

setting.

4

EXIT Button : Press to exit the current

menu.

Detailed Function Information

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the ▲▼◄► buttons to select the

function, menu item, or option. The explanation will

usually appear on the bottom of the screen.

A short description of each Settings function starts

on this page. Additional information on some of the

functions is also in the Appendix of this manual.

Settings Menu Functions

Picture

TV Aspect Ratio

Lets you adjust the output of the product to the

screen size of your TV. (See page 25)

BD Wise

BD Wise is Samsung’s latest inter-connectivity

feature. When you connect a Samsung product

and a Samsung TV with BD Wise to each other

via HDMI, and BD Wise is on in both the product

and TV, the product outputs video at the video

resolution and frame rate of the Blu-ray/DVD Disc.

Resolution

Lets you set the output resolution of the HDMI

video signal to BD Wise, Auto, 1080p, 1080i,

720p, 576p/480p. The number indicates the

number of lines of video per frame. The i and

p indicate interlaced and progressive scan,

respectively. The more lines, the higher quality.

HT-J5150_TK-0309.indd 13HT-J5150_TK-0309.indd 13 2015-03-09  3:37:402015-03-09  3:37:40

14 - English

Settings

Movie Frame (24 fps)

Setting the Movie Frame (24 fps) feature to Auto lets

the product adjust its HDMI output to 24 frames per

second automatically for improved picture quality if

attached to a 24 fps compatible TV.

~

You can enjoy the Movie Frame (24 fps) feature

only on a TV supporting this frame rate.

~

Movie Frame is only available when the product

is in the HDMI 1080p output resolution modes.

HDMI Colour Format

Lets you set the colour space format for the HDMI

output to match the capabilities of the connected

device (TV, monitor, etc).

HDMI Deep Colour

Lets you set the product to output video from the

HDMI OUT jack with Deep Colour. Deep Colour

provides more accurate colour reproduction with

greater colour depth.

Progressive Mode

Lets you improve picture quality when viewing

DVDs.

Sound

Speaker Settings

Lets you adjust the following speaker settings and

turn the speaker test on and off so you can test

the speakers.



Level

: Lets you adjust the relative loudness of

each speaker from 6dB to -6dB. For example, if

you like deep bass, you can increase the loudness

of the subwoofer by 6dB.



Distance

: Lets you adjust the relative distance

of each speaker from the listening position up to

9 meters. The farther the distance, the louder the

speaker will be.



Speaker Test

:

Lets you run the Speaker Test

function so you can test your adjustments. Setting

Speaker Test to On turns the Speaker Test on.

Setting it to Off turns it off.

Speaker Selection

Lets you select which speakers you want active,

either the TV's speakers or the home cinema's

speakers.

Equaliser Mode

Set Equaliser Mode on to use the equaliser.

Equaliser Settings

Lets you set the equaliser.

✎

Equaliser Settings only appears when

Equaliser Mode is On.

Audio Return Channel

Lets you direct the sound from the TV to the Home

Cinema speakers. Requires an HDMI connection

and an Audio Return Channel (ARC) compatible

TV.

~

If Audio Return Channel is set to on and you

are using an HDMI cable to connect the product

to the TV, digital optical input will not work.

~

If Audio Return Channel is set to Auto and you

are using an HDMI cable to connect the product

to the TV, ARC or digital optical input is selected

automatically.

Digital Output

Lets you set the Digital Output to match the

capabilities of the AV receiver you’ve connected to

the product. For more details, please refer to the

digital output selection table. (See page 30)

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital,

Dolby Digital Plus, and Dolby TrueHD audio.



Auto:

Automatically controls the dynamic range of

Dolby TrueHD audio, based on information in the

Dolby TrueHD soundtrack. Also turns dynamic range

control off for Dolby Digital and Dolby Digital Plus.



Off: Leaves the dynamic range uncompressed,

letting you hear the original sound.



On: Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder

and the volume of loud sounds is reduced.

HT-J5150_TK-0309.indd 14HT-J5150_TK-0309.indd 14 2015-03-09  3:37:412015-03-09  3:37:41

15 - English

Settings

Downmixing Mode

Lets you select the multi-channel downmix method

that is compatible with your stereo system. You can

choose to have the product downmix to Normal

Stereo or to Surround Compatible.

Audio Sync

When the product is attached to a digital TV, lets

you adjust the audio delay so that the audio syncs

with the video. You can set the delay between 0

and 300 milliseconds.

System

Setup

Lets you re-run the Setup procedure. (See page

12)

Quick start

You can turn on the power quickly by decreasing

the boot time.

✎

If this function is set to On, Standby power

consumption will be increased. (About 12W ~

20W)

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked

operations with other Samsung products that have

the Anynet+ feature and lets you control those

products with one Samsung TV remote. To operate

this function, you must connect this product to an

Anynet+ Samsung TV using an HDMI cable.

BD Data Management

Enables you to manage the downloaded contents

you accessed through a Blu-ray disc and stored

on a flash drive.

You can check the device's information including

the available storage size, delete the BD data, or

change the Flash memory device.

DivX® Video On Demand

View DivX® VOD Registration Codes to purchase

and play DivX® VOD contents.

Language

Lets you select the language you prefer for the On-

Screen Menu, Disc Menu, etc.

~

The selected language will only appear if it is

supported on the disc.

Security

The default PIN is 0000. Enter the default PIN to

access the security function if you haven't created

your own PIN.

BD Parental Rating

Prevents playback of Blu-ray Discs with a rating

equal to or above a specific age rating unless you

enter the PIN.

DVD Parental Rating

Prevents playback of DVDs with a rating above a

specific numerical rating unless you enter the PIN.

Change PIN

Changes the 4-digit PIN used to access security

functions.

Support

Software Upgrade

For more information about this function, see page

17.

Contact Samsung

Provides contact information for assistance with

your product.

HT-J5150_TK-0309.indd 15HT-J5150_TK-0309.indd 15 2015-03-09  3:37:412015-03-09  3:37:41

16 - English

Settings

Reset

Reverts all settings to their defaults. Requires that

you enter your security PIN. The default security

PIN is 0000.

Radio Setup

~

To listen to the radio, you must connect the

supplied FM antenna.

Operating the Radio with the Remote Control

1. Press the FUNCTION button to select FM.

2. Tune to the desired station.

~

Preset Tuning 1 : Press the

5

button to

select PRESET, and then press the

TUNING

UP, DOWN button to select a preset station.

- Before you can tune to preset stations, you

must add preset stations to the product's

memory.

~

Manual Tuning : Press the

5

button to

select MANUAL, and then press the TUNING

UP, DOWN button to tune in to a lower or

higher frequency.

~

Automatic Tuning : Press the

5

button to

select MANUAL, and then press and hold

the

TUNING UP, DOWN button for a few

seconds to automatically search the band.

Selecting Mono or Stereo

Press the MO/ST button.

~

Each time you press the button, the sound

switches between STEREO and MONO.

~

In a poor reception area, select MONO for a clear,

interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1. Press the FUNCTION button to select FM.

2. Press the TUNING UP, DOWN button to scroll

the FM frequencies, and then select <89.10>.

3. Press the

TUNER MEMORY button (the yellow

C button at the bottom of the remote).

4. Press the TUNER MEMORY button again

within about 5 seconds. The station is stored in

memory.

✎

If you press the

TUNER MEMORY

button

repeatedly without changing the station, the

inputted station may be overwritten.

5. To preset another station, repeat steps 2 to 4.

~

To tune in to a preset station, press the

TUNING UP, DOWN button.

✎

To delete all Preset FM stations at once, press the

TITLE MENU button for about 5 seconds in FM

Manual mode until DEFAULT PRESET appears

on the display.

About RDS Broadcasting

Using the RDS (Radio Data System) to receive

FM stations

RDS allows FM stations to send an additional signal

along with their regular program signals.

For example, the stations send their station names,

as well as information about what type of program

they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS

service, the RDS indicator lights up on the display.

Description on RDS function

~

PTY (Program Type) : Displays the type of program

currently being broadcast.

~

PS NAME (Program Service Name) : Indicates the

name of broadcasting station and is composed of

8 characters.

~

RT (Radio Text) : Decodes the text broadcast by

a station (if any) and is composed of maximum 64

characters.

~

CT (Clock Time) : Decodes the real time clock from

the FM frequency. Some stations may not transmit

PTY, RT or CT information therefore this may not

be displayed in all cases.

~

TA (Traffic Announcement) : TA ON/OFF it shows

that the traffic announcement is in progress.

✎

RDS may not operate correctly if the station tuned

is not transmitting RDS signal properly or if the

signal strength is weak.

HT-J5150_TK-0309.indd 16HT-J5150_TK-0309.indd 16 2015-03-09  3:37:422015-03-09  3:37:42

17 - English

Settings

To show the RDS signals

You can see the RDS signals the station sends on the

display.

Press the

RDS DISPLAY button while listening to an

FM station.

~

Each time you press the button, the display change

to show you the following information : PS NAME



RT



CT



Frequency

PS (Program

Service)

While searching, <PS NAME>

appears and then the station

names will be displayed.

<NO PS> appears if no signal is

sent.

RT (RadioText)

While searching, <RT> appears

and then text messages the

station sends will be displayed.

<NO RT> appears if no signal is

sent.

Frequency

Station frequency (non-RDS

service)

About characters shown in the display

When the display shows PS,or RT signals,the

following characters are used.

~

The display window cannot differentiate upper case

and lower case letters and always uses upper case

letters.

~

The display window cannot show accented letters,

<A,> for instance, may stands for accented <A’s>

like <À, Â, Ä, Á, Å and Ã.>

PTY (Program Type) indication and

PTY-SEARCH function

One of the advantages of the RDS service is that

you can locate a particular kind of program from the

preset channels by specifying the PTY codes.

To search for a program using the PTY codes

~

Before you start!

- The PTY Search is only applicable to preset

stations.

- To stop searching any time during the process,

press

5

button while searching.

- There is a time limit in doing the following steps.

If the setting is cancelled before you finish, start

from step 1 again.

- When pressing the buttons on the primary

remote control, make sure that you have selected

the FM station using the primary remote control.

1

2

3

PTY - PTY SEARCH PTY +

RDS DISPLAY TA

4

56

+

1. Press the PTY SEARCH button while listening

to an FM station.

2. Press the

PTY- or PTY+ button until the PTY

code you want appears on the display.

~

The display gives you the PTY codes

described to the right.

3. Press the

PTY SEARCH button again, while the

PTY code selected in the previous step is still on

the display.

~

The centre unit searches 15 preset FM

stations, stops when it finds the one you have

selected, and tunes in that station.

Upgrading Software

The Software Upgrade menu allows you to upgrade

the product’s software for performance improvements

or additional services.

~

Never turn the product off or back on manually

during the update process.

~

The update is complete when the product turns

off after restarting. Press the

POWER button to

turn on the updated product for your use.

1. Visit Samsung's website on a computer and

download the update package to a USB device.

✎

Save the update package in the USB device's

top-level folder. Otherwise, the product will not be

able to locate the update package.

2. Connect the USB device with the update

package to the product.

3. Select Support > Software Upgrade >

By USB. The software is updated using the

update package on the USB device.

✎

There should be no disc in the product when you

upgrade the software using the USB Host jack.

✎

When the software upgrade is done, check the

software details in the Software Upgrade menu.

HT-J5150_TK-0309.indd 17HT-J5150_TK-0309.indd 17 2015-03-09  3:37:422015-03-09  3:37:42

18 - English

Playing Content

Your home cinema can play content located on

Blu-ray/DVD/CD discs and USB devices.

Switching the Source Device

If two or more external devices are connected to

the main unit, you can use any of the three methods

described below to change the source device.

Method 1

From the Home screen, use the ▲▼◄► buttons to

move to Change Device, and then press

E

.

The Change Device popup window will appear. Use

the ▲▼ buttons to move to the desired device, and

then press

E

.

Method 2

If you move to PHOTOS, VIDEOS, MUSIC or other

file-based contents, a list of folders and files will

appear. Press the RED (A) button to display the

Change Device popup window, use the ▲▼ buttons

to move to the desired device, and then press

E

.

Method 3

When a device is connected for the first time, a

popup window appears. In the popup, you can

change the source device by using the ◄► buttons,

and then pressing

E

.

Playing Commercial Discs

1. Press the



button to open the disc tray.

2. Place a disc gently into the disc tray with the

disc’s label facing up.

3. Press the



button to close the disc tray.

Playback starts automatically.

4. If playback does not start automatically, press

the

6

button on the remote.

Disc Storage & Management

~

Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where data

has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

~

Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a soft

cloth.

- When cleaning, wipe gently from the

inside to the outside of the disc.

- Disc Storage



Do not keep in direct sunlight.



Keep in a cool ventilated area.



Keep in a clean protective jacket and store

vertically.

Playing a Disc with User Recorded

Content

You can play multimedia files you have recorded on

Blu-ray, DVD, or CD discs.

1. Place a user recorded disc into the disc tray with

the disc’s label facing up, and then close the

tray.

2. Use the ◄► buttons to select the type of

content you want to view or play - PHOTOS,

VIDEOS, or MUSIC - and then press the

E

button.

OR

2

-1

. Select PLAY DISC from the Home screen.

The PLAY DISC screen appears. Use the ▲▼

buttons to select the desired content type,

Photos, Videos, or Music.

HT-J5150_TK-0309.indd 18HT-J5150_TK-0309.indd 18 2015-03-09  3:37:432015-03-09  3:37:43

19 - English

Playing Content

3. A screen appears listing the contents of the disc.

Depending on how the contents are arranged,

you will see either folders, individual files, or

both.

4. If necessary, use the ▲▼◄► buttons to select

a folder, and then press the

E

button.

5. Use the ▲▼◄► buttons to select a file to view

or play, and then press the

E

button.

6. Press the

RETURN button one or more times to

exit a current screen, exit a folder, or to return to

the Home screen.

Press the EXIT button to return directly to the

Home Screen.

7. Go to pages 20~24 for instructions that

explain how to control playback of videos,

music, and pictures on a disc.

Playing Files on a USB Device

There are two methods you can use to play or view

multimedia files located on a USB device through

your product.

Method 1 : If you connect a USB device while

the product is turned on

1. The "New device connected." pop-up appears.

PLAY DISC

Change

Device

Function

No Disc

Settings

PHOTOS VIDEOS MUSICPLAY DI

SC

C

hange

De

v

ice

Fu

n

c

t

io

n

No Dis

c

S

etting

s

P

H

O

T

OS

VIDE

OS

M

US

I

C

New device connected.

STORAGE DEVICE

Photos

Videos

Music

> Move " Enter ' Return

✎

If the pop-up does not appear, go to Method 2.

2. Use the ▲▼ buttons to select Photos, Videos,

or Music and then press the

E

button.

Depending on how the contents are arranged,

you will see either folders, individual files, or

both.

3. If necessary, use the ▲▼◄► buttons to select

a folder, and then press the

E

button.

4. Select a file to view or play, and then press the

E

button.

5. Press the

RETURN button to exit a folder or the

EXIT button to return to the Home screen.

6. Go to pages 20~24 for instructions that

explain how to control playback of videos,

music, and pictures on a USB device.

Method 2 : If the product is turned on after

you connect a USB device

1. Turn the product on.

2. Press Change Device and select a USB device.

3. Use the ◄► buttons to select PHOTOS,

VIDEOS, or MUSIC on the Home screen, and

then press the

E

button.

4. If necessary, use the ▲▼◄► buttons to select

a folder, and then press the

E

button.

5. Select a file to view or play, and then press the

E

button.

6. Press the

RETURN button to exit a folder or the

EXIT button to return to the Home screen.

7. Go to pages 20~24 for instructions that

explain how to control playback of videos,

music, and pictures on a USB device.

✎

If you insert a disc while playing a USB device, the

device mode changes to "Disc" automatically.

HT-J5150_TK-0309.indd 19HT-J5150_TK-0309.indd 19 2015-03-09  3:37:442015-03-09  3:37:44

20 - English

Playing Content

Controlling Video Playback

You can control the playback of video content located

on a Blu-ray/DVD disc or USB device. Depending on

the disc or contents, some of the functions described

in this manual may not be available.

Buttons on the Remote Control used

for Video Playback

SUBTITLE HOME

REPEAT

DISC MENU

TITLE MENU

0

POPUP

1

2

3

1

Playback related buttons

The product does not play sound in Search, Slow,

or Step mode.

~

To return to normal speed playback, press the

6

button.

6

Starts playback.

5

Stops playback.

7

Pauses playback.

Fast

Motion

Play

During playback, press the

3

or



button.

Each time you press the

3

or



button, the playback speed will

change.

Slow

Motion

Play

In pause mode, press the



button.

Each time you press the



button,

the playback speed will change.

Step

Motion

Play

In pause mode, press the

7

button.

Each time you press the

7

button,

a new frame appears.

Skip

Motion

Play

During playback, press the

1

or

2

button.

Each time you press the

1

or

2

button, the disc moves to the

previous or next chapter or file.

2

Using the disc menu, title menu, popup

menu, and title list

DISC MENU

During playback, press this button to display the

Disc menu.

TITLE MENU

During playback, press this button to display the

Title menu.

~

If your disc has a playlist, press the

GREEN (B)

button to go to the playlist.

POPUP MENU

During playback, press this button to display the

Popup menu.

3

Repeat Playback

1. During playback, press the REPEAT button

on the remote control.

2. Press the ▲▼ buttons to select Off, Title,

Chapter, All or Repeat A-B, and then press

the

E

button.



Repeat A-B

1. Press the

E

button at the point where you

want repeat play to start (A).

2. Press the

E

button at the point where you

want repeat play to stop (B).

3. To return to normal play, press the REPEAT

button again.

4. Press the

E

button.

✎

Depending on the disc, the screen may not

display all repeat options.

✎

The screen may not display Chapter or Title

immediately. Continue to press the ▲▼ buttons

until your choice is inside the applicable field.

✎

To return to normal play, press the REPEAT

button again, press the ▲▼ buttons to select

Off, and then press the

E

button.

✎

The screen may not display Repeat A-B

immediately. Continue to press the ▲▼ buttons

until Repeat A-B is inside the applicable field.

✎

You must set point (B) at least 5 seconds of

playing time after point (A).

HT-J5150_TK-0309.indd 20HT-J5150_TK-0309.indd 20 2015-03-09  3:37:452015-03-09  3:37:45

Sayfa yükleniyor ...

Samsung HT-J5150 Kullanım kılavuzu

Samsung HT-J5150 Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler

Diğer Belgeler