Yamaha V4.0 El kitabı

EN

OWNER’S MANUAL

Version 4.0

DME Designer Owner’s Manual

2

Getting Started with DME Designer

In this manual the abbreviation “DME” refers to the DME64N/DME24N/DME8i-C/DME8o-C/DME4io-C/

DME8i-ES/DME8o-ES/DME4io-ES. The abbreviation “DME Satellite” refers to the DME8i-C/DME8o-C/

DME4io-C/DME8i-ES/DME8o-ES/DME4io-ES.

Your DME, SP2060, ICP1 and the DME Designer software, let you build a custom audio system

installation that can support an incredible variety of conditions. You can build an entire system from

input to output with the DME Designer software, then send the system data to the DME and SP2060

which become independent processors.

An amazing variety of applications are possible, including audio installations, sub-mixing, speaker

system control, matrix/routing, and multi-effect processing.

SPECIAL NOTICES

• The software and this Owner’s Manual are the exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and the

software.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may

appear somewhat different from the screens which appear on your computer.

• Future upgrades of application and system software and any changes in specifications and

functions will be announced separately.

•Windows

®

is the registered trademark of Microsoft

®

Corporation.

NOTE

Here the abbreviation “DME” does not include the “DME32.”

NOTE

This manual is based on the English version of operating system. Illustrations, command names, window names, and similar

information are from that version. Some items may differ from what you see on the computer screen, depending on which

operating system you are using.

DME Designer Owner’s Manual

3

The DME Audio System Network

In an audio system including one or more DME units and/or SP2060 units, the “control space” is

logically organized using the concepts of “Area”, “Zone”, and “Device Group”. The space covered by

the entire system is the “Area”, while independent sonic spaces within that Area are called “Zone”.

A group of DME or SP2060 units assigned to the same function are considered a “Device Group”.

An Area is comprised of one or more Zones, and each Zone can include up to 32 Device Groups.

A single Device Group can include as many as 16 devices. Each Device Group has one “Group

Master”.

NOTE

Meter response may deteriorate as the number of meters displayed in a single device group in DME Designer increases. In

such cases meter response can be improved by dividing the device group.

See “Zone Window” (page 298) for details on deleting devices from a device group.

NOTE

DME and SP2060 units cannot be combined in the same Device Group.

NOTE

All devices in a Device Group must be on the same subnet.

NOTE

A single device group cannot be controlled from multiple computers (multiple instances of DME Designer).

Area

Zone1

Zone2

Zone1

Device Group1

Device Group2

Device Group1

Device1

(Group Master)

Device2

(Slave)

DME Designer Owner’s Manual

4

The DME Designer Software Application

The DME Designer software application provides a convenient, central interface for the creation and

control of DME-based audio systems.

By connecting the computer on which the DME Designer application is running to a Group Master it

becomes possible to control multiple devices simultaneously.

With DME Designer, DME audio systems can be designed and configured via a comprehensive block-

diagram interface on the computer screen.

The main concepts used in the creation of DME audio systems are “Components”, “Configurations”,

“Preset Parameters”, and “Scenes”.

 Components

Any independent signal-processing block, such as an equalizer, compressor, input/output module, or

external device control object is a “Component”.

 Configurations

A “Configuration” is group of components, including their placement and interconnections.

 Preset Parameters

The set of parameters for all components in a Configuration is know as the Configuration’s “Preset

Parameters”.

DME Designer Owner’s Manual

5

 Scenes

A Configuration and its Preset Parameters are a “Scene”.

DME settings as well as Configuration and Preset Parameter settings are sent from the DME Designer

application running on the computer to the Device Master via USB or Ethernet, allowing each device

to function as a separate processor, independently from the computer. It is also possible to keep the

DME Designer application on line and control the devices in real time.

It is possible to use the DME Designer to create Configurations that include multiple devices when the

appropriate devices are connected.

Although it is possible to have multiple Zones in an Area, multiple Device Groups in a Zone, and

multiple Scenes and Configurations in a Device Group, only one Area, Zone, Device Group and

Configuration can be active and editable via the DME Designer at any one time. The active elements

are known as the Current Zone, Current Device Group, Current Scene, and Current Configuration.

Scenes1

Scenes2

Scenes

999

MATRIX MIXER

PARAMETRIC EQ

DELAY DELAYCROSSOVER

2WAY

COMP/LIMITER

PARAMETRIC EQ

DELAY CROSSOVER

2WAY

COMP/LIMITER

COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

16 x 8

8 BAND

= Components

Example: GATE

• Attack

• Decay

• Range

• Threshold

• Key in

• Hold

Scenes

Composition of scene

Preset

Parameters

Configurations

DME Designer Owner’s Manual

6

Data Handled by a DME Audio System

 DME Data Structure

* Some settings not included.

Common Overall Data

Scene Link Settings Settings required for linked scene operation between multiple

groups.

Data for Each Device Group

User Defined Button Settings Settings required for component parameter control from the

DME64N/DME24N or ICP1 panel.

Up to 24 parameters can be registered for control.

Global Parameter Link Settings Settings required for linked operation of the same types of

parameters between multiple devices.

Data Used by the Scene Manager

MIDI program Change Settings Settings required to allow scene selection via MIDI commands.

Scenes The information required to switch audio data processing

setups.

Scenes include configurations and preset data.

The Scene Manager facilitates registration and management of

scene data.

Up to 999 scenes can be registered, and registered scenes are

managed by their scene numbers.

Data for Each Device

Configurations A combination of the audio signal processing, audio input/

output, and external device control components and their

interconnections, created to create the desired audio system.

Local Parameter Link

Settings

Settings that allow linked operation between similar types of

internal DME parameters.

Component Link

Settings

Settings that allow linked operation between similar types of

internal DME components.

External Device

Settings

Settings required to allow control of component parameters from

external devices.

Independent settings are required for each device.

The external devices that can be used are as follows:

• MIDI Controller (MIDI Control Change, Parameter Change).

•GPI Controller.

• DAW Controller.

• AMX, Crestron, and other remote controllers.

• PM5D or other compatible mixing console (controlling DME

internal head amp)

Preset Parameters The settings for the components in a configuration.

Audio processing setups can be switched by changing the

preset parameters.

Components included in the preset parameter set are as follows:

• GEQ, MatrixMixer, and other audio signal processing

components.

• Internal AD/DA (DME24N), Cascade (DME64N), and Mini-YGDAI

card I/O components*.

• Components for external devices such as the AD8HR and AD824

remote head amplifiers.

Wave file Audio files to be played back by the Wav File Player.

File Storage Project files and other file types can be stored.

DME Designer Owner’s Manual

7

 SP2060 Data Structure

Common Overall Data

Scene Link Settings Settings required for linked scene operation between multiple devices.

Data for Each Device

Scenes The information required to switch audio data processing setups.

Scenes include configurations and preset data, The last Library name

recalled is specified.

The Scene Manager facilitates registration and management of scene

data.

Up to 99 scenes can be registered for 12 preset areas and 87 user

areas, and registered scenes are managed by their scene numbers.

Configurations A combination of the audio signal processing, audio input/output, and

external device control components and their interconnections, created

to create the desired audio system.

Local Parameter Link

Settings

Settings that allow linked operation between similar types of internal

SP2060 parameters.

Preset Parameters The settings for the components in a configuration.

Audio processing setups can be switched by changing the preset

parameters.

Preset parameters can be recalled by SP2060 units, but not edited.

Data for Each Component

Library Settings specific to the speakers to be used.

In addition to the preset data provided, settings can be created by the

DME Designer.

DME Designer Owner’s Manual

8

One DME unit/Device Group

No.

001

002

003

004

005

006

....

Configuration

Output Processor for Dome

...

Scene Name

All On

Opening

Band Set 1

Band Set 2

Band Set 3

...

Preset Parameters

All On

BGM & MC

Band 1

Band 2

Band 3

Microphone

Mixer

External Head Amp

etc...

Power Amp

Processor

etc...

Input

External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)

Audio signal

Notes

Device Group

Output

Control signal

Data explanation

Setting preset parameters

LCD Display

Dome Low

Dome Mid

Dome Hi

....

Assigned Parameter

Crossover: Output Low: Level

Crossover: Output Mid: Level

Crossover: Output High: Level

(No Assign)

User Defined Button Scene Manager

Specifies the parameter to be changed.

Specifies the configuration

and preset parameters combination.

Configuration

Output Processor for Dome

Local parameter link settings

External device settings

MY8-AE

(Input)

MY8-AE

(Output)

Cross-

Over

EQ

Delay EQ Dyn

Delay

All On Component value

BGM & MC

Band 1

Band 2

Band 3

Preset parameters for output processor

Set the value

Two DME units/Device Group

(When one DME unit doesn’t provide sufﬁcient processing power, up to 16 DME units can be used)

DME#2

Configuration

Output Processor

for Hall

Local parameter link settings

External device settings

All On

BGM & MC

Band

Device Group

LCD Display

Dome Low

Dome Mid

Dome Hi

Hall Low

Hall Mid

Hall Hi

....

Assigned Parameter

#1: Crossover: Output Low: Level

#1: Crossover: Output Mid: Level

#1

:

Crossover

:

Output High

:

Level

#2: Crossover: Output Low: Level

#2: Crossover: Output Mid: Level

#2

:

Crossover

:

Output High

:

Level

No.

001

002

003

004

005

006

....

Configuration

Output Processor for Dome

...

Scene Name

All On

Opening

Band Set 1

Band Set 2

Band Set 3

...

Preset parameters

All On

BGM & MC

Band 1

Band 2

Band 3

Configuration

Output Processor for Hall

...

Preset parameters

All On

BGM & MC

Band

User Defined Button

Scene Manager

DME#1

Configuration

Output Processor

for Dome

Local parameter link settings

External device settings

All On

BGM & MC

Band 1

Band 2

Band 3

Preset parameters Preset parameters

External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)

Microphone

Mixer

External Head Amp

etc...

Power Amp

Processor

etc...

Input Output

DME#1

DME#2

For DME#2

For DME#1

Specifies the parameter to be linked between DME units.

Global Parameter Link

For DME#1 For DME#2

Audio signal

Notes

Control signal

Data explanation

Setting preset parameters

Selects the parameter to be

edited from two DME units.

Specifies the configuration and preset

data combination in each DME

DME Designer Owner’s Manual

9

NOTE

Separate SP2060 units normally handle scenes independently, but the Scene Link function can be set from the DME

Designer to allow linked scene operation. See “Scene Link Manager” on page 151.

DME Designer Owner’s Manual

10

Main Changes from V1.0 to V1.1

 Main Panel Window

• Instead of the former Parameter Link function, there are now two functions: a Global Link function

that links parameters within all DMEs in a zone and a Local Link function that links parameters

within a single DME unit. (page 94)

• The Synchronization function can now not only send data from DME Designer to the DME unit,

but can also synchronize by reading data from the DME unit. (page 97)

• Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input

function. (page 114)

• DME unit events can now be recorded by the Event Logger function and displayed in the Event

Logger window. (page 177)

• The time for executing an event can now be set by using the Event Scheduler function.

(page 139)

• Parameters in the current configuration can now be listed on the display and printed out by using

the Parameter List function. (page 144)

• The Wav File Manager can manage Wave files played by the Wav File Player. (page 151)

• Settings can be made by the DAW Control function that are used for controlling DMEs from a

DAW controller. (page 157)

• DME unit data can now be saved as a backup file by using the Backup function. (page 157)

 Designer Window

• The port name display can now be switched between long name display and short name display.

(page 206)

• DME64N cascade connections can now be set. (page 221)

• Priority items can now be set when compiling configurations by using the [Compile Priority]

function in the “Preferences” dialog box. (page 220)

• Delay time can now be displayed for each component by using the Show Signal Delay function.

(page 305)

• Monitoring points can now be edited by using the “Monitoring Point List” dialog box. (page 306)

• The status of connections in a configuration can now be analyzed in advance by using the

Analyze function, without connecting the DME unit. (page 308)

• You can now set the action that occurs when you double-click a user module object. You can also

turn user module security ON or OFF, and set a password. (page 246)

• Libraries with component parameters saved in them can now be recalled from the context menu

for a component object. (page 236)

• A new rule for wiring prohibits connections to terminals that would short the terminator.

 Component Editor/Component

• A status bar has been added to the component editor. It displays the component name,

component ID, and parameter IDs for parameters that are being edited. (page 320)

• A Snap function has been added that records parameters in the editor temporarily. Parameter

sets can then be switched by using the Snap buttons. (page 362)

• The meter’s peak hold function can now be turned ON or OFF. (page 359)

• A Wav File Player component has been added for playing Wave files. (page 430)

• An effect component called SPX has been added that supports many different effect

applications, such as reverb, delay, and modulation effects, along with complex combinations of

multiple effects. (page 471)

• A Slot Out component editor has been added. (page 488)

• An Undo/Redo function is now available when using the design mode. It can undo the most

recent operation (control movement/resize/deletion).

DME Designer Owner’s Manual

11

Changes from V1.1 to V1.2

 Main Panel Window

• The synchronization algorithm has been refined for faster synchronization.

• Synchronization now can be executed from DME to DME Designer without any break in the

sound.

• In the following cases, synchronization can be executed from DME Designer to DME without any

break in the sound:

The second or later synchronization after starting DME Designer* and when differences in data

between the DME and DME Designer are limited to parameters within components, AD824/

AD8HR/DME24N AD/DA setting data, or Mini-YGDAI card setting parameters.

* If the file was saved when DME Designer was closed, there will be no break in sound even in the first

synchronization after saving.

• Compile speed has been increased.

Up to three times faster when AutoDelayCompensation is turned On.

Up to two times faster when AutoDelayCompensation is turned Off.

• Synchronization is possible when no Mini-YGDAI card or a different Mini-YGDAI card is installed

in the DME unit (a confirmation message will appear).

• An option to automatically close the dialog after synchronization has been added. (page 99)

• A progress bar has been added to the Synchronization dialog. (page 51)

• A message appears to warn when synchronization will cause muting.

• The following operations can be performed while on line:

- Scene storage.

- Scene name changes.

- Fade ON/OFF and Fade Mode changes.

- Fade time changes.

- Parameter link setting changes.

• When a scene store is executed, that scene becomes the current scene.

• Wave files can be saved as DME data files, and are included in import/export operations.

(page 44)

• Wave files can be saved in the Wav file library.

• Event Log events can be output via GPI. (page 79)

• The on-line indicator appears as a button which can be used to switch between on-line and

off-line. (page 59)

• Scene edits cause the EDIT indicator to appear. (page 57)

• An auto file save function (Auto Save, post synchronization) has been added. (page 73)

• Different zones can be specified for use by different users. (page 158)

• Scene parameters related to User Defined Button, Program Change, GPI In and GPI Out can be

set via the Scene Manager. (page 82)

• [Select All] and [Clear All] buttons have been added to the Scene Manager Recall Safe dialog

box. (page 86)

• User Control can be created for individual users as well as security levels. (page 91)

• A Remote Control Setup List has been added. (page 139)

This list can be used to make detailed settings for a new software protocol that allow the DME to

be controlled from AMX, Crestron, and similar devices.

Refer to the “DME-N Remote Control Protocol Specifications” document for details about the

communication protocol. Information about the “DME-N Remote Control Protocol Specifications”

document can be found at the Yamaha pro Audio website (URL below).

http://www.yamahaproaudio.com/

• It is possible to specify whether listed events will be executed by the Event Scheduler.

(page 139)

DME Designer Owner’s Manual

12

• The order of same-time events can be changed in the Event Scheduler. (page 139)

• Exceptions can be specified for Event Scheduler execution day/time. (page 107)

• Event Scheduler execution times can be specified in 1-second increments. (page 106)

• Head amp gain and Mini-YGDAI Card can be set via GPI, MIDI, User defined Button, DAW

Control.

• Parameter values, scene recall, GPI output, Wave file playback, and head amp gain can be set

via the User Defined Buttons. (page 132)

• The Component Lock function dialog is separate from the Parameter List dialog. (page 150)

• Shortcuts can be freely set as required. (page 156)

• Files can be saved in the DME unit. (page 70)

• A [Close All Editor Windows] button has been added to the Window menu. (page 69)

• External head amp parameters will be recognized by the DME unit when either the DME or the

external head amp (AD824, AD8HR) are turned on. Execute a scene recall to send DME settings

an external head amp.

• This manual is now separate from the DME Designer installer, and can not be accessed from the

DME Designer menus.

 Designer Window

• The following operations can be carried out via the shortcut keys.

- Navigator

- Activate Navigator

- Activate Toolkit

- Activate Design Window

- Select Left Port and Start Wiring

- Select Right Port and Start Wiring

- Wire Auto Single to Right

- Wire Auto Multi to Right

- Wire Auto Single to Left

- Wire Auto Multi to Left

- Delete Wire

• It is now possible to simultaneously edit multiple objects of the same type.

Example: Change the thickness or color of multiple wires at once.

• Files related to user modules (user module files, library files, user module editor files) can be

combined and exported/imported as a single file.

• Port colors can be independently specified for each port type. (page 219)

• Default wire thicknesses and types can be independently specified for each port type.

• An automatic hot-spot connection function has been added. (page 285)

• Port display has been added to External Device, Picture, DME, and ICP1 objects.

• When drawing wires the keyboard cursor keys can be used to move the mouse cursor, and the

<Enter> key can be used to create nodes.

• When drawing wires <Shift> key plus <> key and <Shift> key plus <> key combinations can

be used to automatically connect horizontally-aligned hot spots.

• DME object ports can be freely specified.

• Compilation of configurations with loop connections is possible when Auto Delay Compensation

is On.

• The name has been changed from “Foot Monitor” external device to “Floor Monitor.”

• Addition External Device types have been provided.

• External Devices can be double-clicked to open a file saved by other applications. (page 233)

• Picture objects can be double-clicked to open a specified editor. (page 249)

• Text objects can be double-clicked to open a specified editor. (page 252)

DME Designer Owner’s Manual

13

• User module port labels can be edited. (page 246)

• Graphics can be placed to represent user modules. (page 247)

• The Legend field automatically resizes to accommodate project names and titles of different

lengths.

• A Generic “MY-Others” setting has been provided to accommodate third-party Mini-YGDAI

cards.

 Component Editor Window

• Undo and Redo are now shortcut compatible.

• A scroll bar appears when the size of the component editor window is reduced.

• The size and position of the component editor window are memorized.

• An option to allow mouse-over zooming of the edit box has been added. (page 323)

• A [Back] button that allows switching between related parent and child windows has been

added. (page 320)

• A [Close All Editor Windows] button has been added to the contextual menu.

• Source Selector, Speaker Processor, Limiter, Slot In, Cascade In, and Cascade Out components

have been added.

• The Delay algorithm has been revised. (page 399

- LEVEL and MUTE are effective when Delay is Off for each channel.

- The name of the overall Delay [On] parameter has been changed to [All Bypass].

• The bus send level range for Delay, Matrix, and Matrix Mixer components has been changed to

-∞ through 0.0 dB.

• Snap copy is possible. (page 363)

• Snap can be retained until the application is quit or another file is opened.

• Security status is displayed in the user module editor status bar.

• Multiple controllers can be selected by clicking while holding the <Ctrl> key when the editor is in

the design mode. (page 337)

• [Picture], [Text], [Box], [Ellipse], and [Frame] have been added to the tool palette of the user

module editor and user control editor design mode. (page 325)

• Controller properties can be accessed by double-clicking controllers in the user module editor or

user control editor design mode. (page 344)

• Picture and Text objects can be clicked to open a specified editor in the user module editor or

user control editor.

• The User Module Editor and User Control Editor offer a greater range of customization options for

color, size. etc., of the placed controls.

 MIDI Setup

• A MIDI Setup minimize function has been added.

 V1.2 Precautions

• When using project files (*.daf) created by version 1.1.5 or earlier, synchronize from the DME

Designer to the DME unit for the first synchronization.

• Project files (*.daf) created using version 1.2 will not open properly on version 1.1.

IN

Input

Mute

Input

Level

Input

Mute

Input

Level

On

Delay On

Delay All Bypass

OUT

Mute Level

On Mute Level

IN

Delay

DME Designer Owner’s Manual

14

Changes from V1.2 to V2.0

 General

• Support added for DME8i-C/DME8o-C/DME4io-C, SP2060 units and MY16-CII.

• “Device Groups”, or groups of the same type of device, have been added at the lowest Zone

level.

• It is now possible to have one master device per device group rather than one master device per

zone. This means that it is possible to have multiple master devices in a single zone.

• Group masters can now be assigned regardless of the IP address. This makes it possible to have

multiple device groups at a single network address.

• Configurations can be created and deleted for each device group.

 Component

• A Feedback Suppressor component has been added. (page 419)

• The Speaker Processor component PEQ “Q” parameter now goes to “63”. (page 464)

 Main Panel Window

• Firmware and component data can now be updated simultaneously. (page 186)

• A Recovery Update function that allows recovery from program corruption has been added.

(page 188)

• A Component Link function that allows simultaneous linking of all component parameters has

been added. (page 94)

• Scene Link function that allows simultaneous control of multiple devices in different device

groups has been added. (page 151)

• A Protect function has been added to the scene manager. (page 82)

• Card settings are no longer included in scene data.

• A Utility window has been added to allow editing of device utility settings. (page 167)

• The Local Parameter Link display order has been changed. (page 94)

• Parameter Link operation can now be turned on or off for each device group. (page 94)

• Compilation and analysis is now possible even if no connections have been made.

• Navigator window hide/show can now be selected from the main window.

• The Event Logger can now display only the event data for a specified device. (page 75)

• The GPI terminal names have been changed from [CH] to [PORT].

 Designer Window

• A hand tool for window movement has been added. The hand tool can be selected via the hand/

arrow icon in the toolbar, or from the [Tools] menu. The hand tool can also be temporarily

selected by holding the spacebar on your keyboard.

• Window magnification and reduction can now be controlled via the mouse wheel while holding

the keyboard “Ctrl” key.

• Horizontal scrolling can be controlled via the mouse wheel while holding the keyboard “Shift” key.

• The Edit Mode on/off can now be changed from the tool bar. (page 192)

• Scene information now appears in DME objects, and the Scene Manager can be launched from

the scene information display. (page 82)

• An [On-line] button has been added to DME objects, and synchronization is now possible.

(page 59)

• Sampling frequency display has been added to the resource meter window. (page 196)

• Sampling frequency display has been added to the configuration window status bar. (page 301)

• The sampling frequency is now displayed during analysis.

DME Designer Owner’s Manual

15

• Double-clicking the component name now opens the properties window.

• Organization of the Tool Kit window has been changed. (page 198)

• A [Draw Image] checkbox that displays or hides the worksheet background image file has been

added to the Sheet properties. (page 263)

• [Configuration Manager] has been added to the contextual menu that appears when a DME or

SP2060 object is right-clicked. (page 217,page 226)

• [Recall Component Library] and [Store Component Library] now appear in the contextual menu

that appears when a component is right-clicked, even when the Edit Mode is OFF.

• The Compile Settings can now be edited for each DME unit. (page 220)

• Only one Zone window is now provided for multiple configurations.

• The [Export DXF] and [Preferences] commands have been moved from the [Print] menu to the

[Tools] menu.

• [Configuration] has been changed to [Configuration Manager] in the [Tools] menu.

• When [Prohibit Diagonal Connections] in the [Tools] menu is active it is possible to select 2

diagonal points and those points will automatically be connected by a combination of horizontal

and vertical wires.

 Component Editor Window

• A [Level Meter Enable] command that displays or hides the meter values has been added to the

contextual menu. Hiding the meters can result in increased communication speed in some

cases. (page 360)

• A [Display Order] function that allows the order of the controllers to be changed as required has

been added to the User Control Editor and User Module Editor. (page 325)

• An [Add Component to Component Link] command has been added to the controller contextual

menu.(page 360)

• The registered group is now displayed in the [Add Parameter to Parameter Link] submenu of the

contextual menu of controllers registered for Parameter Link operation.(page 368)

• Increased speed when selecting and dragging a large number of controllers in the User Control

Editor and User Module Editor

• It is now possible to switch from the Navigator window to Zone display while online.

 V2.0 Precautions

Please use DME Designer V2.0 with DME64N/24N V2.0 or later, DME8i-C/DME8o-C/DME4io-C V2.0

or later, and SP2060 V1.1 or later.

See the Yamaha Pro Audio website for compatibility details (http://www.yamahaproaudio.com/).

When DME64N/24N and DME8i-C/DME8o-C/DME4io-C are used together in the same device

group, faster communication speed as well as smoother DME Designer meter display can be

obtained by assigning a DME8i-C/DME8o-C/DME4io-C unit as the device group master.

DME Designer Owner’s Manual

16

Changes from V2.0 to V3.0

 General

• DME8i-ES/DME8o-ES/DME4io-ES support.

• The DME Designer and DME-N Network Driver installers have been combined, so the

appropriate DME-N Network Driver version is now installed automatically with the DME Designer

application.

• The following connections to the Slave DME units are now possible when a DME Satellite unit is

assigned as the Device Group Master:

- USB/Ethernet connection to the computer (DME Designer).

- Cascade connection to control from the PM5D console (DME64N only).

 Component

• Ambient Noise Compensator component added (page 379).

• Audio Detector component added (page 381).

• Auto Gain Control component added (page 382).

• Auto Mixer II component added (page 431).

• Simple Mixer component added (page 450).

• Room Combiner component added (page 460).

• Matrix Mixer and Router component variations added.

 Main Panel Window

• To allow project information to be easily reproduced on a different computer, it is now possible to

export and import all necessary files at once, rather than only project files with the “.daf”

extension (page 45).

• A Device Information window that lists the status of all devices has been added (page 190).

• It is now possible to individually set each user control to determine whether it will open

automatically when the project file is opened (page 91).

• In accordance with the above change, the Startup User Control item has been removed from the

Security dialog box.

• It is now possible to assign Direct Parameter Value to the GPI input function, and assign Direct

Parameter Value and Audio Detector to the GPI output function (page 112, page 122).

• An option that automatically saves the project file (.daf extension) in the DME unit when going

online has been added (page 98).

• It is now possible to control internal DME-24N/DME8i-C/DME4io-C/DME8i-ES/DME4io-ES head

amps from a PM5D or other compatible mixing console (page 141).

• Remote control from AMX, Crestron, and similar controllers is now possible via Ethernet

connection only for DME Satellite units. (page 171).

• The display format of the parameter values displayed in the Remote Control Setup List and

Parameter List dialog box can now be switched between the internal settings and the values

displayed in the editor windows (page 139, page 147).

• The Event Logger window can now display additional error messages shown on the DME display

panel (page 80).

• It is now possible to set the DME unit so that the internally stored event log is not erased

(page 77).

• Improvements have been made to the additional error message information shown in the Event

Logger window.

• The DME unit internal clock and DME Designer time display now support daylight saving time

(DST) (page 180).

• Firmware updates can now be applied to entire device groups, for improved speed and

efficiency.

DME Designer Owner’s Manual

17

 Designer Window

• It is now possible to set a “clear” background color for text, box, and ellipse objects (page 252,

page 254, page 256).

• Password entry is now required when opening a User Module Properties dialog box or saving/

exporting in a user module to which security has been applied.

• Linked software applications can now be launched from the Slot component contextual menu

(page 240).

• User module templates that use the same library are now categorized and displayed as user

module groups (page 310).

• Image files are now included in User Module exports.

• Component and parameter links can now be copied when DME objects, components, and user

modules are copied/pasted or duplicated.

• Parameter links are now saved when User Module data is saved/exported.

• When already-placed picture files are replaced, they will be updated and displayed correctly

without the need to restart the DME Designer application.

 Component Editor Window

• [Line] and [Scene Recall] tools have been added to the User Module Editor and User Control

Editor design modes, allowing placement of lines and scene recall buttons (page 332).

• In the User Module Editor and User Control Editor it is now possible to convert placed sliders to

knobs, and vice-versa (page 343).

• More options are available for customizing the controls listed below in the User Module Editor

and User Control Editor:

- A property dialog box has been added for sliders, allowing customization of direction, scale,

color, size, and other parameters (page 345).

- Level meter size can be customized (page 347).

- A property dialog box has been added for slider level meters, allowing customization of

direction and size (page 348).

- Knob color and knob background color can be customized (page 344).

- Text background color can be customized (page 352).

- A property dialog box has been added for indicators, allowing customization of color and size

(page 348).

 V3.0 Precautions

Use DME Designer V3.0 only with DME64N/24N V3.0 or later, DME Satellite V3.0 or later, and/or

SP2060 V1.2 or later. Refer to the Yamaha Pro Audio website (http://www.yamahaproaudio.com/)

details on combinations.

When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME

Satellite unit as the device group master. Synchronization cannot be performed if a DME64N/24N is

assigned as the device group master.

When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or later, and DME-

N Network Driver V1.2 or later.

DME Designer Owner’s Manual

18

Changes from V3.0 to V3.5

 Component

• Program Ducker component added (page 412).

• (V3.5.1) During installation it is possible to select and install speaker library data for third-part

speakers into the Speaker Processor component library.

 Main Panel Window

• MIDI Setup has been discontinued. Communication ports can now be directly selected via the

[Setup] menu [Communication Port] item. (page 155)

• (V3.5.1) [SP2060 Backup] has been added to the main panel window [Hardware] menu, allowing

internal SP2060 data to be transferred to a computer for backup. Multiple SP2060 units can be

restored from the backup data. (page 184)

 Designer Window

• Improvements in the compiler algorithm achieve greater DSP resource utilization efficiency.

(page 98, page 305, page 308)

• MY16-ES64, MY16-EX, and MY16-MD64 I/O cards can now be specified for slot installation.

• The TX6n/TX5n/TX4n, ACD1, SB168-ES, IMX644, IPA8200, and NEXO products can now be

specified as external devices. V3.5.1 adds the IM8, MSR250, and other devices.

• When cascade connecting DME64N units across device groups, unit numbers are automatically

assigned when a connection is made between the [CAS IN] and [CAS OUT] terminals in the

Zone window.

 Others (Firmware V3.09 changes)

• When controlling DME units remotely from a PM5D using the DME Control function, it is now

possible to set an ID number other than “2” for the group master DME unit. In this case the PM5D

firmware must be updated to V2.20 or later.

• It is now possible to replace the default DME64N/24N startup screen (normally the model name)

with an original graphic file. (page 71)

 V3.5 Precautions

Use DME Designer version V3.5 with DME64N/24N or DME Satellite units running firmware version

between V3.0 and V3.8, and SP2060 units running firmware version V1.2 or later. Refer to the

Yamaha Pro Audio website (http://www.yamahaproaudio.com/) details on combinations.

When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME

Satellite unit as the device group master. Synchronization cannot be performed if a DME64N/24N is

assigned as the device group master.

When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or later, and DME-

N Network Driver V1.2 or later.

When using the Windows 7 operating system, use only USB-MIDI Driver V3.0.4 or later, and DME-N

Network Driver V1.2.1 or later.

DME Designer Owner’s Manual

19

Changes from V3.5 to V3.8

 New Features

• The DME64N/24N (V3.8x or later) can now be controlled via Ethernet connection from certain

external control devices.

• The DME64N/24N (V3.8x or later) can now be assigned as the device group master when the

device group is formed by combining the DME64N/24N (V3.8x or later) and the DME Satellite.

• A new [Show Unconnected Node] button which displays unconnected nodes has been added

into the Designer window toolbar.

• The window sizes of User Control Editor/User Module Editor can now be enlarged more than the

display resolution of computers. When a size is set that is larger than the display resolution of

computers in the “User Control Editor Settings” dialog box which can be selected in the context

menu, a scroll bar is displayed.

• New library data has been added into the Preset Library of the Speaker Processor.

• The following devices can now be set for the external devices: M7CL-48ES, DSR series, S5, NS-

AW series, NS-IC series, KMS-710, CD-S300RK, CD-C600RK, Gooseneck Microphone and

Boundary Microphone.

 Changes

• The layout of the Remote functions and MIDI functions have been changed through revisions of

the operation of the Utility dialog.

 Fixed Bugs

• Fixed problems in which the Remote Control settings were not applied to the DME Designer

appropriately when synchronizing.

• Fixed a problem in which the meter laid out in User Control might not move.

• Fixed a problem in which the window might not be displayed when the external display status

was changed.

• Fixed a problem in which the parameters of both Recall Safe and Global Link, might not be

displayed appropriately when Scene Recall was executed.

 V3.8 Precautions

• Use DME Designer version V3.8.0 with DME64N/24N or DME Satellite units running firmware

version V3.0 or later, and SP2060 units running firmware version V1.2 or later.

• Use the latest DME Designer to update the DME firmware to the latest version.

• DME Designer cannot be used to update firmware version 3.5 or earlier to version 3.8 or later, or

to downgrade from version 3.8 or later to version 3.5 or earlier (this does not apply to the SP2060

or ICP1). Contact your Yamaha dealer.

• Save an up-to-date DME project file (*.daf). Don’t update unless an up-to-date “.daf” file has

already been saved on your computer. Without the “daf” file, you will not be able to restore DME

operation.

• When DME64N/24N units running firmware version 3.5 or earlier and DME64N/24N or DME

Satellite units running firmware versions 3.8 or later are combined in the same device group,

DME64N/24N units running firmware version 3.5 or earlier cannot be designated as the group

master.

• If the Program Ducker component is used, both DME firmware and DME Designer versions must

be V3.5 or later.

DME Designer Owner’s Manual

20

Changes from V3.8 to V4.0

 New Features

• The MY4-AEC card can now be selected for I/O card slots. AEC components, which are available

when the card is installed, have been added.

• The “Partial Recall” function has been added. Scenes can now be recalled on a per component

basis. By utilizing both Recall Safe and the new Partial Recall functions, components to be

recalled or not recalled can now be selected precisely.

• Configurations can now be duplicated in the “Configuration Manager” window.

• In the Main Panel window, configuration names are now displayed, and configurations may be

selected.

• The VS4, VS6, and NS-IC600 can now be specified as external devices.

 Changes

• The Remote V3.5 tab and the MIDI V3.5 tab in the “Utility” dialog box have been deleted.

• The [Cancel] button has been added in the “Project File has been modified. Save?” dialog box

which is displayed before closing DME Designer to cancel closing procedure.

 Fixed Bugs

• Fixed a problem in which SP2060 configurations could be edited when the “Configuration

Manager” dialog box was opened via [Tools] menu [Configuration Manager] item.

• Fixed a problem in which configurations could be edited while online when the “Configuration

Manager” dialog box was opened via the context menu displayed by right clicking a DME object

in the Designer window.

• Fixed a problem in which the compiling procedure would occasionally complete successfully

even though an error should occur when an IN port was connected to multiple OUT ports.

• Fixed a problem in which the compiling procedure would occasionally not complete when

compiling was executed on a complex configuration with multiple SPX components.

• Fixed a problem in which the compiling procedure would occasionally not complete when

compiling was executed on a complex configuration having an SPX component with an output

connected to any other component.

• Fixed a problem in which the [+48V Master] indicator didn't light in the AD8HR component editor.

• Fixed a problem in which DME Designer could occasionally freeze when closing the application

by means other than clicking [Exit] in the [File] menu of the Main Panel window.

• Fixed a problem in which parameter links remained functional for parameters of different types

which should not be linked after the effect type was changed for an SPX component having

linked parameters.

• Fixed problems in which Scene Store and Recall functions might not work when Parameter Link

settings were no longer appropriate due to editing the Configuration.

 V4.0 Precautions

• Use DME Designer V4.0 with DME64N/24N or DME Satellite units running firmware V4.0 or later,

and SP2060 units running firmware V1.2 or later.

• Use the latest DME Designer to update the DME firmware to the latest version.

• DME Designer V4.0 cannot be used to update firmware V3.5 or earlier to V4.0 or later, or to

downgrade from V4.0 or later to V3.5 or earlier (this does not apply to the SP2060 or ICP1).

Contact your Yamaha dealer.

• The DME firmware V3.8 can be updated to V4.0 using DME Designer V4.0.

Sayfa yükleniyor ...

Yamaha V4.0 El kitabı

Bu kılavuz için de uygundur

Yamaha V4.0 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler