6 ARZUM
7ARZUM
• Youcanchopupto500gramsoffoodin10
seconds by using your appliance. Such foods may
be those including dry fruits and hard vegetables
such as carrots and celeries, and soft vegetables
such as onions, garlic, and parsleys, as well as
various cheeses, ham, salami, cooked meats
without bones, cooked or uncooked fishes, or
various fruits.
• Beforeoperatingyourunit,
remove the seeds of those
fruits such as peaches,
apricots, plums, etc., and peel
those dried fruits/nuts such as
almonds, hazelnuts, walnuts,
etc. Prefer to use meat without
bones and nerves.
• Youcanbreakicethanks
to the double-folded and double-sided stainless steel blades of your
Arzum Maximin cup in cup chopper.
• Afteryouhavefinishedyourwork,immediatelyrinsethebowl,
transparent intermediate cover, and cutting blades, and wipe dry them
withacloth.Becarefulwhilecleaningbladesastheyaresharp.
Mixing and Beating
• Afterdetachingthemainbody/motorunitand
transparent intermediate cover from the bowl,
locate the beater onto its housing (the centering
spindle) in the bowl.
• Putanymaterialtobemixedorbeatenintothe
bowl.
• Placethetransparentintermediatecovertightly
onto the glass bowl with a capacity of 1500 ml.
Locatethemainbody(motor)onthistransparent
intermediate cover so that it can be inserted into
theslots.Afterensuringthatthemainbodyis
secured on the transparent intermediate cover,
connect the mains plug to the wall socket and
initiate the blades by depressing the operation
switch.
Chopping
• Afterremovingthemainbodyandtransparentintermediatecoverfrom
the bowl, remove also the protective case from blades and then place
the double-sided stainless steel blades, one on top of the other, and
then locate them onto its housing (the centering spindle) in the bowl.
• Putanymaterialtobechoppedintothebowl(iflarge,dividinginto2or
3 pieces).
• Placethetransparentintermediatecover
onto its place of the bowl, the holes of the
transparent intermediate cover must come to
handle of the bowl.
• Thisunitdoesnotoperate,unlessthe
transparent intermediate cover is located onto
the bowl.
•Locatethemainbody(motorunit)onthe
intermediate cover and after ensuring that
the main body is secured on its slot properly,
connect the mains plug to the wall socket and
initiate the blades by pressing the operation
switch.
• Ifyoupushtheoperationswitchatintervalsinsteadofcontinuously,
you get quickly a better chopping result.
• Ifanynon-choppedpiecesareleftafteroperation,mixsuchmaterials
with a spatula and try again 2-3 times at intervals.
• Afterchoppingoperation,removethemainbodyandtransparent
intermediatecoverfromthebowl.Youcanpourthematerialsafter
taking the cutting blade out by holding the plastic part.
EN