3. Before juicing, first confirm juicing net and rotor clutched in position, and no
hard contact between juicing net cutter and transparent cover. Put the
transparent cover on, fasten tight the handle, then turn on the machine.
4. Before being used, the motor works in running-in phase, there may be slight
peculiar smell and spark, this is normal, after the motor works for some period,
the above phenomenon will disappear.
5. During juicing, make sure there is not too full juice and residue in the middle
seat and residue cup, if too full, please cut off power supply, clean up,
then use again.
6. During using, do not open the cup cover. In case power supply is on, do not
put hand or any ware into the mixing cup or feed port, otherwise, harmful
accident may occur or this machine maybe damaged.
7. In order to prolong service life of this machine, over-temperature protective
device is mounted in the motor. If the motor works for a long time or overloaded,
when over warning temperature, power supply will automatically cut off. After
the motor stops, pull out plug of power supply, wait for the motor to cool
(about for 30 min), use again.
8. During operating, please do not leave, never let children operate this machine.
9. When this machine works in mixing, mincing or grinding conditions, no-loaded
or over loaded work is strictly prohibited.
10. After operation, do not pour the food out until pull out the plugof power supply.
11. Cutters are very sharp, in order to avoid danger, when cleaninga cutter,
please put the cutter under water tap for washing, do not wash it with hand.
12. This machine must not be used for others beyond regulated purposes.
13. In case of damaged power supply cord, in order to avoid danger, replacement
must be performed by the manufacturer or its service department or similar
professional persons.
MAINTENANCE AND CLEANING
1. This machine shall be often used, so as to keep the motor dry and clean.
2. If not using for a long time, please store this machine at a dry and well-ventilated
place so as to prevent the motor from being damped and going moldy.
3. No washing the main machine. When cleaning, only wipe with wet cloth. Other
components may be washed directly with water,such as pushing bar, cover,
middle seat, residue cup, juice nozzle cover.