8 9
switching it on.
• To remove the accessory, press the two buttons on the two sides of the
accessory at the same time, using your thumb and index nger (FIG. 1).
• To position the accessory, place it onto the appliance head until it clicks
in.
• Plug in the appliance, switch on using the on/o switch (0/I). The
indicator light starts to ash according to the chosen accessory :
Ø 25 mm - Ø 35 mm
• Select the temperature/timer setting according to your hair type using
the I-II-III button. The appliance adjusts automatically depending on
the chosen accessory (Ø 35 mm or Ø 25 mm). See table below:
Setting Hair type
Ø 35 mm
Volume and
loose curls
Ø 25 mm
Tight curls
I
Fine, bleached,
and/or damaged
hair
190°C / 8 sec. 210°C / 10 sec.
II
Normal hair or
dyed
200°C / 10 sec. 220°C / 12 sec.
III Thick or wavy hair 210°C / 12 sec. 230°C / 14 sec.
• The indicator light stops ashing when the appliance has heated up to
the selected temperature. The appliance is now ready to use.
• Select the adjustment of the direction of the curl, according to the
desired result using the button:
- For an even, more sophisticated style, adjust the appliance to the
position, to create curls to the left side of the head. Then adjust the
appliance to the position, to create curls on the right side of the
head.
- For a softer, more natural style, adjust the appliance to the “A”
(automatic) position. This adjustment will create alternating curls, rst in
one direction and then the opposite.
Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair that is no wider than 3cm. Ensure that there
are no tangles in the section.
• Bring the appliance close to the hair and position it in the correct
direction: the cavity formed by the cylinder downwards (FIG. 2 and 3)
and facing the head (FIG. 4 and 5).
• With your free hand, take hold of the tip of the section of hair and place it
in the opening, in the funnel situated between the two handles (FIG. 6).
Please note: To prevent the appliance from blocking, ensure that you
have no hair lying across the edges.
Also ensure that you are not pulling your hair before activating the
handles (FIG. 7 and 8).
If these precautions are not respected, you risk catching your hair
in the appliance.
• Once the section of hair is in place, close the handles to allow the hair to
automatically enter into the appliance.
• Keep the handles closed until the beeping stops (FIG. 9) (after 3, 4, 5 or
6 beeps with a 1 second interval + 4 consecutive beeps depending on
the selected setting). See table below.
Setting
Ø 35 mm
Volume and loose curls
Ø 25 mm
Tight curls
I
3 beeps w/ 1 sec interval
+ 4 consecutive beeps
4 beeps w/ 1 sec interval
+ 4 consecutive beeps
II
4 beeps w/ 1 sec interval
+ 4 consecutive beeps
5 beeps w/ 1 sec interval
+ 4 consecutive beeps
III
5 beeps w/ 1 sec interval
+ 4 consecutive beeps
6 beeps w/ 1 sec interval
+ 4 consecutive beeps
• Gently release the hair from the appliance by opening the handles
(FIG. 10). Do not pull on the appliance to free the hair. If you do this,
you will ruin the curl eect.
• Allow your hair to cool before handling or combing it.
• Repeat all over the head until you have the number of curls you want.
• After use, switch o and unplug the appliance. Allow to cool before
storing.
Protection system
The appliance is tted with a protection system. If hair becomes tangled,
the appliance emits an audible signal, it blocks, and stops heating.
If this occurs, release the handles, ensuring that the appliance and
section of hair are correctly positioned, then simply re-close the handles
to deactivate the security system and re-start the appliance.
17_C1500E_IB.indd 8-9 8/29/17 8:44 AM