LG OLED55E6V-T El kitabı

Please read this manual carefully before operating your set and

retain it for future reference.

www.lg.com

P/NO : MFL69365705 (1606-REV01)

Printed in Korea

*MFL69365705*

Safety and Reference

2

ENGLISH

Safety instructions

Please read these safety

precautions carefully before using

the product.

WARNING

Do not place the TV and/or remote control in

the following environments:

• A location exposed to direct sunlight

• An area with high humidity such as a

bathroom

• Near any heat source such as stoves and

other devices that produce heat

• Near kitchen counters or humidiers where

they can easily be exposed to steam or oil

• An area exposed to rain or wind

• Near containers of water such as vases

Otherwise, this may result in re, electric

shock, malfunction or product deformation.

Do not place the product where it might be

exposed to dust. This may cause a re hazard.

Mains Plug is the TV connecting/disconnecting

device to AC mains electric supply. This plug

must remain readily attached and operable

when TV is in use.

Do not touch the power plug with wet hands.

Additionally, if the cord pin is wet or covered

with dust, dry the power plug completely or

wipe dust o. You may be electrocuted due to

excess moisture.

Make sure to connect Mains cable to compliant

AC mains socket with Grounded earth pin.

(Except for devices which are not grounded

on earth.) Otherwise possibility you may be

electrocuted or injured.

Insert power cable plug completely into wall

socket otherwise if not secured completely into

socket, re ignition may break out.

Ensure the power cord does not come into

contact with hot objects such as a heater. This

may cause a re or an electric shock hazard.

Do not place a heavy object, or the product

itself, on power cables.

Otherwise, this may result in re or electric

shock.

ENGLISH

3

Bend antenna cable between inside and

outside building to prevent rain from owing

in. This may cause water damaged inside the

Product and could give an electric shock.

When mounting TV onto wall make sure to

neatly install and isolate cabling from rear of

TV as to not create possibility of electric shock /

re hazard.

Do not plug too many electrical devices into a

single multiple electrical outlet. Otherwise, this

may result in re due to over-heating.

Do not drop the product or let it fall over when

connecting external devices. Otherwise, this

may result in injury or damage to the product.

Desiccant

Keep the anti-moisture packing material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can cause

suocation. Keep it out of the reach of children.

Do not let your children climb or cling onto the

TV.

Otherwise, the TV may fall over, which may

cause serious injury.

Dispose of used batteries carefully to ensure

that a small child does not consume them.

Please seek Doctor- Medical Attention

immediately if child consumes batteries.

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall

Socket while it is connected to the input

terminal on the wall. Additionally, do not touch

the power cable right after plugging into the

wall input terminal. You may be electrocuted.

(Depending on model)

4

ENGLISH

Do not put or store inammable substances

near the product. There is a danger of

combustion/explosion or re due to careless

handling of the inammable substances.

Do not drop metallic objects such as coins,

hair pins, chopsticks or wire into the product,

or inammable objects such as paper and

matches. Children must pay particular

attention. Electrical shock, re or injury can

occur. If a foreign object is dropped into the

product, unplug the power cord and contact the

service centre.

Do not spray water on the product or scrub

with an inammable substance (thinner or

benzene). Fire or electric shock accident can

occur.

Do not allow any impact, shock or any objects

to fall into the unit, and do not drop anything

onto the screen. You may be injured or the

product can be damaged.

Never touch this product or antenna during a

thunder or lighting storm.

You may be electrocuted.

Never touch the wall outlet when there

is leakage of gas, open the windows and

ventilate. It may cause a re or a burn by a

spark.

Do not disassemble, repair or modify the

product at your own discretion. Fire or electric

shock accident can occur.

Contact the service centre for check, calibration

or repair.

If any of the following occur, unplug the

product immediately and contact your local

service centre.

• The product has been impacted by shock

• The product has been damaged

• Foreign objects have entered the product

• The product produced smoke or a strange

smell

This may result in re or electric shock.

ENGLISH

5

Unplug the TV from AC mains wall socket if you

do not intend to use the TV for a long period of

time. Accumulated dust can cause re hazard

and insulation deterioration can cause electric

leakage/shock/re.

Apparatus shall not be exposed to dripping or

splashing and no objects lled with liquids,

such as vases, shall be placed on the apparatus.

Do not install this product on a wall if it could

be exposed to oil or oil mist. This may damage

the product and cause it to fall.

If water enters or comes into contact with TV,

AC adapter or power cord please disconnect

the power cord and contact service centre

immediately. Otherwise ,this may result in

electric shock or re.

Only use an authorized AC adapter and power

cord approved by LG Electronics. Otherwise, this

may result in re, electric shock, malfunction or

product deformation.

Never Disassemble the AC adapter or power

cord.

This may result in re or electric shock.

Be careful in handling the adapter to prevent

any external shocks to it.

An external shock may cause damage to the

adapter.

Make sure the power cord is connected securely

to the power plug on the TV. (Depending on

model)

CAUTION

Install the product where no radio wave occurs.

There should be enough distance between an

outside antenna and power lines to keep the

former from touching the latter even when the

antenna falls. This may cause an electric shock.

6

ENGLISH

Do not install the product on places such as

unstable shelves or inclined surfaces. Also avoid

places where there is vibration or where the

product cannot be fully supported. Otherwise,

the product may fall or ip over, which may

cause injury or damage to the product.

If you install the TV on a stand, you need to

take actions to prevent the product from

overturning. Otherwise, the product may fall

over, which may cause injury.

If you intend to mount the product to a wall,

attach VESA standard mounting interface

(optional parts) to the back of the product.

When you install the set to use the wall

mounting bracket (optional parts), x it

carefully so as not to drop.

Only use the attachments / accessories specied

by the manufacturer.

When installing the antenna, consult with a

qualied service technician. If not installed by

a qualied technician, this may create a re

hazard or an electric shock hazard.

We recommend that you maintain a distance

of at least 2 to 7 times the diagonal screen size

when watching TV. If you watch TV for a long

period of time, this may cause blurred vision.

Only use the specied type of battery. This

could cause damage to the remote control.

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and

leak.

Batteries should not be exposed to excessive

heat. For example, keep away from direct

Sunlight , open replace and electric heaters .

Do not place non-rechargeable batteries in

charging device.

Make sure there are no objects between the

remote control and its sensor.

ENGLISH

7

Signal from Remote Control can be interrupted

due to external/internal lighting eg Sunlight,

uorescent lighting. If this occurs turn o

lighting or darken viewing area.

When connecting external devices such as

video game consoles, make sure the connecting

cables are long enough. Otherwise, the product

may fall over, which may cause injury or

damage the product.

Do not turn the product On/O by plugging-

in or unplugging the power plug to the wall

outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an

electric shock.

Please follow the installation instructions

below to prevent the product from overheating.

• The distance between the product and the

wall should be more than 10cm.

• Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in a

cupboard).

• Do not install the product on a carpet or

cushion.

• Make sure the air vent is not blocked by a

tablecloth or curtain.

Otherwise, this may result in re.

Take care not to touch the ventilation openings

when watching the TV for long periods as the

ventilation openings may become hot. This

does not aect the operation or performance of

the product.

Periodically examine the cord of your appliance,

and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with

an exact replacement part by an authorized

servicer.

Prevent dust collecting on the power plug pins

or outlet. This may cause a re hazard.

Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits the

appliance.

8

ENGLISH

Do not press strongly upon the panel with a

hand or sharp object such as nail, pencil or pen,

or make a scratch on it, as it may causedamage

to screen.

Avoid touching the screen or holding your

nger(s) against it for long periods of time.

Doing so may produce some temporary or

permanent distortion/damage to screen.

When cleaning the product and its components,

unplug the power rst and wipe it with a soft

cloth. Applying excessive force may cause

scratches or discolouration. Do not spray with

water or wipe with a wet cloth. Never use glass

cleaner, car or industrial shiner, abrasives or

wax, benzene, alcohol etc., which can damage

the product and its panel. Otherwise, this may

result in re, electric shock or product damage

(deformation, corrosion or breakage).

As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn o this unit by SWITCH.

When unplugging the cable, grab the plug and

unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power

cord from the power board, as this could be

hazardous.

When moving the product, make sure you turn

the power o rst. Then, unplug the power

cables, antenna cables and all connecting

cables.

The TV set or power cord may be damaged,

which may create a re hazard or cause electric

shock.

When moving or unpacking the product,

work in pairs because the product is heavy.

Otherwise, this may result in injury.

Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

ENGLISH

9

If the product feels cold to the touch, there may

be a small “icker” when it is turned on. This is

normal, there is nothing wrong with product.

This panel is an advanced product that contains

millions of pixels. You may see tiny black dots

and/or brightly coloured dots (white, red, blue

or green) at a size of 1ppm on the panel. This

does not indicate a malfunction and does not

aect the performance and reliability of the

product.

This phenomenon also occurs in third-party

products and is not subject to exchange or

refund.

You may nd dierent brightness and colour

of the panel depending on your viewing

position(left/right/top/down).

This phenomenon occurs due to the

characteristic of the panel. It is not related

with the product performance, and it is not

malfunction.

Displaying a still image for a prolonged period

of time may cause image sticking. Avoid

displaying a xed image on the TV screen for a

long period of time.

Some horizontal lines may appear when the

Clear Panel Noise feature is performed. It is

normal and there is no need to be concerned.

Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning o the TV

is generated by plastic thermal contraction

due to tempera-ture and humidity. This

noise is common for products where thermal

deformation is required. Electrical circuit

humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit,

which supplies a large amount of current to

operate a product. It varies depending on the

product.

This generated sound does not aect the

performance and reliability of the product.

Do not use high voltage electrical goods near

the TV(e.g. electric mosquito-swatter). This may

result in product malfunction.

Viewing 3D imaging

(Only 3D models)

CAUTION

• Children should be supervised by an

adult when viewing 3D video. If a child

experiences eye fatigue, headaches or

blurred vision while watching 3D, they

should take a break, before they resume

watching 3D content.

• When viewing a 3D video, some may

experience discomfort such as a headache,

dizziness, fatigue, or blurred vision. In this

case, stop watching the 3D video and take

a rest.

10

ENGLISH

• If you watch a 3D video for a long time, you

may experience eye fatigue. In this case,

stop watching the 3D video and take a rest.

• Only use LG 3D glasses. Otherwise, you may

not be able to view 3D videos properly.

• Do not use 3D glasses instead of your

normal glasses, sunglasses, or protective

goggles.

• Do not keep your 3D glasses in extremely

high or low temperatures. It will cause

deformation.

• Do not use 3D glasses while walking or

moving around. It may cause an accident or

injury.

• Be careful not to poke your eye with the

frames of the 3D glasses.

• Do not watch 3D content if you have

photosensitive seizures, epilepsy, or heart

disease.

Preparing

NOTE

• If the TV is turned on for the rst time after

it was shipped from the factory, initialization

of the TV may take a few minutes.

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier

slightly from that shown in this manual.

• The available menus and options may dier

from the input source or product model that

you are using.

• New features may be added to this TV in the

future.

• The items supplied with your product may

vary depending on the model.

• Product specications or contents of this

manual may be changed without prior

notice due to upgrade of product functions.

• For an optimal connection, HDMI cables

and USB devices should have bezels less

than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the

USB cable or USB memory stick does not t

into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

• Use a certied cable with the HDMI logo

attached.

• If you do not use a certied HDMI

cable,

the screen may not display or a connection

error may occur. (Recommended HDMI

Cable

Types)

- High-Speed HDMI

®

/

TM

Cable (3m or less)

- High-Speed HDMI

®

/

TM

Cable with Ethernet

(3m or less)

CAUTION

• Do not use any unapproved items to ensure

the safety and product life span.

• Any damage or injuries caused by using

unapproved items are not covered by the

manufacturer’s warranty.

• Some models have a thin lm attached on

to the screen and this must not be removed.

• When attaching the stand to the TV set,

place the screen facing down on a cushioned

table or at surface to protect the screen

from scratches.

ENGLISH

11

• Make sure that the screws are fastened

completely. (If they are not fastened securely

enough, the TV may tilt forward after being

installed.) Do not use too much force and

over tighten the screws; otherwise screw

may be damaged and not tighten correctly.

• Make sure to wring any excess water or

cleaner from the cloth.

• Do not spray water or cleaner directly onto

the TV screen.

• Make sure to spray just enough of water or

cleaner onto a dry cloth to wipe the screen.

Separate purchase

Separate purchase items can be changed or

modied for quality improvement without any

notication. Contact your dealer to buy these

items. These devices only work with certain

models.

The model name or design may be changed

depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

(Depending on model)

AG-F***

Cinema 3D Glasses

AN-MR650

Magic Remote

AG-F***DP

Dual Play Glasses

AN-VC550

Smart Camera

Lifting and moving

the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for

safe transportation regardless of its type and

size.

• It is recommended to move the TV in

the box or packing material that the TV

originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the screen should

face away from you to avoid damage.

• Hold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

• When transporting a large TV, there should

be at least 2 people.

• When transporting the TV by hand, hold

the TV as shown in the following illustration.

12

ENGLISH

• When transporting the TV, do not expose

the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

• Do not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

• When handling the TV, be careful not to

damage the protruding buttons.

CAUTION

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not move the TV by holding the cable

holders, as the cable holders may break, and

injuries and damage to the TV may occur.

Using the button

(Depending on model)

You can simply operate the TV functions,

pressing or moving the buttons.

Joystick Button

Joystick Button

Basic functions

Power On (Press)

Power O (Press and hold)

1

Volume Control

Programmes Control

1 All running apps will close, and any recording

in progress will stop.

ENGLISH

13

Adjusting the menu

When the TV is turned on, press the button

one time. You can adjust the Menu items

pressing or moving the buttons.

Turns the power o.

Clears on-screen displays and returns

to TV viewing.

Changes the input source.

Accesses the settings menu.

Mounting on a

table

1 Lift and tilt the TV into its upright position on

a table.

• Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources

of heat, as this may result in re or other

damage.

Securing the TV to a

wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

• If there are bolts inserted at the eye-bolts

position, remove the bolts rst.

2 Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope. Make sure to keep

the rope horizontal with the at surface.

CAUTION

• Make sure that children do not climb on or

hang on the TV.

NOTE

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts and ropes are not provided.

You can obtain additional accessories from

your local dealer.

14

ENGLISH

Mounting on a wall

Attach an optional wall mount bracket at the

rear of the TV carefully and install the wall

mount bracket on a solid wall perpendicular

to the oor. When you attach the TV to other

building materials, please contact qualied

personnel. LG recommends that wall mounting

be performed by a qualied professional

installer.

We recommend the use of LG’s wall mount

bracket. LG’s wall mount bracket is easy to

move with cables connected. When you do not

use LG’s wall mount bracket, please use a wall

mount bracket where the device is adequately

secured to the wall with enough space to allow

connectivity to external devices. It is advised

to connect all the cables before installing xed

wall mounts.

10 cm

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are

described in the following table.

Separate purchase(Wall

mounting bracket)

Model OLED55/65B6*

OLED55/65E6*

OLED55/65C6*

VESA (mm)

(A x B)

300 x 200 400 x 200

Standard

screw

M6 M6

Number of

screws

4 4

Wall mount

bracket

OTW420B OTW420B

A

B

CAUTION

• Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

NOTE

• To remove the stand, hold the top and

bottom of stand, then pull it out while

also lowering it as shown below. (Only

OLED55/65E6*)

1

2

1

2

ENGLISH

15

• To install the wall mount, use the stand

assembly screws to attach the Wall mount

cover to the bottom of the product as shown

in the gure below. (Only when the item of

the following form is provided)

Provided item

Wall mount

cover

x 2

Connections

(notications)

Connect various external devices to the TV and

switch input modes to select an external device.

For more information of external device’s

connection, refer to the manual provided with

each device.

Available external devices are: HD receivers,

DVD players, VCRs, audio systems, USB storage

devices, PC, gaming devices, and other external

devices.

NOTE

• The external device connection may dier

from the model.

• Connect external devices to the TV

regardless of the order of the TV port.

• If you record a TV program on a DVD

recorder or VCR, make sure to connect the TV

signal input cable to the TV through a DVD

recorder or VCR. For more information of

recording, refer to the manual provided with

the connected device.

• Refer to the external equipment’s manual

for operating instructions.

• If you connect a gaming device to the TV,

use the cable supplied with the gaming

device.

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast

or brightness. If noise is present, change

the PC output to another resolution, change

the refresh rate to another rate or adjust

the brightness and contrast on the PICTURE

menu until the picture is clear.

• In PC mode, some resolution settings

may not work properly depending on the

graphics card.

• If ULTRA HD content is played on your

PC, video or audio may become disrupted

intermittently depending on your PC’s

performance. (Depending on model)

Antenna connection

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal

amplier properly to improve the image

quality.

• If the image quality is poor with an antenna

connected, try to realign the antenna in the

correct direction.

• An antenna cable and converter are not

supplied.

• Supported DTV Audio: MPEG, Dolby Digital,

Dolby Digital Plus, HE-AAC

• For a location that is not supported with

ULTRA HD broadcasting, this TV cannot

receive ULTRA HD broadcasts directly.

(Depending on model)

16

ENGLISH

Satellite dish

connection

(Only satellite models)

Connect the TV to a satellite dish to a satellite

socket with a satellite RF cable (75 Ω).

CI module connection

(Depending on model)

View the encrypted (pay) services in digital TV

mode.

• Check if the CI module is inserted into the

PCMCIA card slot in the right direction. If

the module is not inserted properly, this can

cause damage to the TV and the PCMCIA

card slot.

• If the TV does not display any video and

audio when CI+ CAM is connected, please

contact to the Terrestrial/Cable/Satellite

Service Operator.

USB connection

Some USB Hubs may not work. If a USB device

connected through a USB Hub is not detected,

connect it directly to the USB port on the TV.

Other connections

Connect your TV to external devices. For the

best picture and audio quality, connect the

external device and the TV with the HDMI cable.

Some separate cable is not provided.

•

General HDMI

ULTRA HD Deep Colour :

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2,

4:2:0)

- Off : Support 4K @ 50/60 Hz 8bit (4:2:0)

If the device connected to Input Port also

supports ULTRA HD Deep Colour, your picture

may be clearer.

However, if the device doesn’t support it, it may

not work properly.

In that case, connect the device to a different

HDMI port or change the TV’s HDMI ULTRA HD

Deep Colour setting to Off.

(This feature is available on certain models

which are supported ULTRA HD Deep Colour

only.)

NOTE

• Supported HDMI Audio format :

Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),

DTS (44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192

kHz)

(Depending on model)

Slim remote control

(Depending on model)

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly.

To replace coin batteries, turn the battery

cover counterclockwise by using a coin. Take

the battery cover o and insert the battery

(CR2032) facing forward

. Put the battery

cover on the remote control and turn it

clockwise to close. To remove the coin batteries,

perform the installation actions in reverse.

Make sure to point the remote control toward

the remote control sensor on the TV.

ENGLISH

17

EXIT

BACK

STB

PWR

A

B

A

(POWER) Turns the TV on or o.

You can turn your set-top box

on or o by adding the set-top box to the

universal remote control for your TV.

Adjusts the volume level.

Scrolls through the saved

programmes.

(MUTE) Mutes all sounds.

* By pressing and holding the

button,

audio descriptions function will be enabled.

(Depending on model)

B

Returns to the previous level.

Clears on-screen displays and returns to

last input viewing.

(HOME) Accesses the Home menu.

(INPUT) Changes the input source.

* Pressing and holding the button

displays all the lists of external inputs.

Selects menus or options and conrms

your input.

Navigation buttons (up/down/

left/right)

Press the up, down, left or right button to

scroll the menu.

Battery installation

WARNING

DO NOT INGEST BATTERY. CHEMICAL BURN

HAZARD.

CAUTION

• The battery used in this device may present

a re or chemical burn hazard if mistreated.

Do not recharge, disassemble, incinerate, or

heat above 100 °C. Replace the battery part

no. CR2032 only. Use of another battery may

present a risk of re or explosion. Dispose

of used battery. Keep battery away from

children. Do not disassemble or dispose of

in re.

• [The remote control supplied with] This

product contains a coin/button cell battery.

If the coin/button cell battery is swallowed,

it can cause severe internal burns in just

2 hours and can lead to death. Keep new

and used batteries away from children. If

the battery compartment does not close

securely, stop using the product and keep

it away from children. If you think batteries

might have been swallowed or placed

inside any part of the body, seek immediate

medical attention.

• If you have long nails, do not open the

battery cover by using your nger. Or else,

your nail could break.

18

ENGLISH

Magic remote

functions

When the message “Magic remote battery is

low. Change the battery.” is displayed, replace

the battery.

To replace batteries, open the battery

cover, replace batteries (1.5 V AA) matching

the

and ends to the label inside the

compartment, and close the battery cover. Be

sure to point the magic remote toward the

remote control sensor on the TV. To remove the

batteries, perform the installation actions in

reverse.

(Depending on model)

GUIDE

LIST

STB

TEXT

T.OPT

FOCUS

MENU

RECENT

EXIT

BACK

LIVE ZOOM

STB

PWR

6

mno

9

wxyz

3

def

2

abc

1

. @

4

ghi

8

tuv

7

pqrs

0

5

jkl

/

A

B

A

(POWER) Turns the TV on or o.

You can turn your set-top box

on or o by adding the set-top box to the

universal remote control for your TV.

Number buttons Enters numbers.

(Space) Opens an empty space on the

screen keyboard.

Accesses the saved programmes list.

(Screen Remote) Displays the Screen

Remote.

*Accesses the Universal Control Menu.

(Depending on model)

B

Adjusts the volume level.

P Scrolls through the saved programmes.

(MUTE) Mutes all sounds.

* By pressing and holding the

button,

audio descriptions function will be enabled.

(Depending on model)

(SEARCH) Search for content such as TV

programmes, movies and other videos, or

perform a web search by entering text in the

search bar.

(Voice recognition) (Depending on

model)

Network connection is required to use the

voice recognition function.

1. Press the voice recognition button.

2. Speak when the voice display window

appears on the TV screen.

ENGLISH

19

GUIDE

LIST

STB

TEXT

T.OPT

FOCUS

MENU

RECENT

EXIT

BACK

LIVE ZOOM

STB

PWR

6

mno

9

wxyz

3

def

2

abc

1

. @

4

ghi

8

tuv

7

pqrs

0

5

jkl

/

C

D

C

(HOME) Accesses the Home menu.

Shows the previous history.

Displays the set-top box Home

menu.

* When you are not watching via a set-top

box: the display changes to the set-top box

screen.

Wheel (OK) Press the center of the Wheel

button to select a menu. You can change

programmes by using the wheel button.

Navigation buttons (up/down/

left/right)

Press the up, down, left or right button to

scroll the menu.

If you press

buttons while the

pointer is in use, the pointer will disappear

from the screen and Magic Remote will

operate like a general remote control.

To display the pointer on the screen again,

shake Magic Remote to the left and right.

Returns to the previous level.

Clears on-screen displays and returns to

last input viewing.

Shows programmes guide.

D

Used for viewing 3D video. (Only 3D

models)

(INPUT) Changes the input source.

* Pressing and holding the button

displays all the lists of external inputs.

(Q. Settings) Accesses the Quick

Settings.

* Pressing and holding the button displays

the All Settings menu.

TELETEXT buttons (

, )

These

buttons are used for teletext.

Views the information of the current

programme and screen.

Control buttons (

) Controls media

contents.

You can zoom in on the area where

the remote control is pointed.

By zooming in on the selected

area, you can view it in full screen.

Coloured buttons These access special

functions in some menus.

(

: Red, : Green, : Yellow, : Blue)

20

ENGLISH

(Depending on model)

A

B

A

(POWER) Turns the TV on or o.

(STB POWER) You can turn your set-

top box on or o by adding the set-top box to

the universal remote control for your TV.

Number buttons Enters numbers.

(Space) Opens an empty space on the

screen keyboard.

Accesses the saved programmes list.

(Screen Remote) Displays the Screen

Remote.

*Accesses the Universal Control Menu.

(Depending on model)

B

Adjusts the volume level.

P Scrolls through the saved programmes.

(MUTE) Mutes all sounds.

* By pressing and holding the

button,

audio descriptions function will be enabled.

(Depending on model)

(SEARCH) Search for content such as TV

programmes, movies and other videos, or

perform a web search by entering text in the

search bar.

(Voice recognition) (Depending on

model)

Network connection is required to use the

voice recognition function.

1. Press the voice recognition button.

2. Speak when the voice display window

appears on the TV screen.

(HOME) Accesses the Home menu.

Shows the previous history.

Displays the set-top box Home

menu.

* When you are not watching via a set-top

box: the display changes to the set-top box

screen.

C

D

Sayfa yükleniyor...

LG OLED55E6V-T El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

LG OLED55E6V-T El kitabı

diğer dillerde

İlgili makaleler

Diğer belgeler