Yamaha RX-V3800 El kitabı

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

RX-V3800

Printed in Malaysia WK69520

RX-V3800

AV Receiver

Ampli-tuner audio-vidéo

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

G

RX-V3800_G-cv.fm Page 1 Monday, June 4, 2007 11:14 AM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow ventilation space of at least

30 cm on the top, 20 cm on the left and right, and 20 cm on

the back of this unit.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in an environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign objects may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to

this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12

Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause

fire, damage to this unit, and/or personal injury. Yamaha will not

be held responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15

When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

16 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

17 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

18 Before moving this unit, press

A

MASTER ON/OFF to

release it outward to the OFF position to turn off this unit, the

main room, Zone 2 and Zone 3 and then disconnect the AC

power plug from the AC wall outlet.

19 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE plugging

into the AC wall outlet. Voltages are as follows:

................................. 110/120/220/230–240 V AC, 50/60 Hz

20 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

21 Excessive sound pressure from earphones and headphones can

cause hearing loss.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

Caution: read this before operating your unit.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

As long as this unit is connected to the AC wall outlet,

it is not disconnected from the AC power source even

if you turn off this unit by

A

MASTER ON/OFF. In

this state, this unit is designed to consume a very small

quantity of power.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or

coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical

and electronic equipment, at their end-

of-life, should be disposed of separately

from your household waste.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

1 En

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

English

Notices...................................................................... 2

Features ................................................................... 3

Supplied accessories .................................................. 4

Getting started ........................................................ 5

Quick start guide .................................................... 6

Connections........................................................... 12

Optimizing the speaker setting for your

listening room (YPAO)..................................... 37

Using the automatic setup (Auto Setup).................. 37

Playback ................................................................ 41

Basic procedure ....................................................... 41

Selecting audio input jacks (AUDIO SELECT)...... 42

Selecting the MULTI CH INPUT component......... 42

Using your headphones............................................ 42

Muting the audio output........................................... 43

Playing video sources in the background

of an audio source................................................ 43

Using the sleep timer ............................................... 43

Operating the amplifier functions of this unit by using

the graphical user interface (GUI) screen............ 44

Sound field programs ........................................... 45

Selecting sound field programs ............................... 45

Sound field program descriptions............................ 45

Using CINEMA DSP 3D mode............................... 50

Enjoying unprocessed input sources........................ 50

Using audio features ............................................. 51

Enjoying pure hi-fi sound ........................................ 51

Adjusting the tonal quality....................................... 51

Adjusting the speaker level...................................... 52

Enjoying multi-channel sources in 2-channel stereo

... 52

FM/AM tuning ...................................................... 53

Automatic tuning ..................................................... 53

Manual tuning.......................................................... 53

Automatic preset tuning........................................... 54

Manual preset tuning ............................................... 54

Selecting preset stations........................................... 55

Exchanging preset stations ...................................... 55

Radio Data System tuning (Europe model only)

... 56

Displaying the Radio Data System information ...... 56

Selecting the Radio Data System program type

(PTY SEEK mode).............................................. 57

Using the enhanced other networks

(EON) data service .............................................. 58

Using iPod™.......................................................... 59

Controlling iPod™................................................... 59

Using Network/USB features............................... 61

Navigating the network and USB menus................. 61

Using a PC server or Yamaha MCX-2000 .............. 63

Using the Internet Radio.......................................... 64

Using a USB memory device

or a USB portable audio player ........................... 65

Using shortcut buttons ............................................. 65

Recording .............................................................. 67

Advanced sound configurations...........................68

Selecting decoders ................................................... 68

Graphical user interface (GUI) screen................70

Stereo/Surround (Stereo/Surround menu) ............... 71

Input Select .............................................................. 78

Manual Setup (Volume) .......................................... 81

Manual Setup (Sound) ............................................. 82

Manual Setup (Video) ............................................. 86

Manual Setup (Basic) .............................................. 88

Manual Setup (NET/USB)....................................... 91

Manual Setup (Option) ............................................ 93

Signal Info. (Input signal information).................... 96

Language ................................................................. 97

Saving and recalling the system settings

(System Memory) ..............................................98

Saving the current system settings........................... 98

Loading the stored system settings.......................... 99

Using examples...................................................... 100

Remote control features......................................103

Controlling this unit, a TV, or other components

...... 103

Setting remote control codes ................................. 105

Programming codes from other remote controls ... 107

Changing source names in the display window..... 108

Macro programming features ................................ 109

Clearing configurations ......................................... 112

Using multi-zone configuration..........................115

Connecting the Zone 2 and Zone 3 components

....... 115

Controlling Zone 2 or Zone 3 ................................ 116

Advanced setup....................................................120

Using the advanced setup menu ............................ 120

Troubleshooting...................................................124

Resetting the system............................................134

Glossary................................................................135

Sound field program information......................139

Parametric equalizer information .....................140

Specifications .......................................................141

Index.....................................................................143

z

(at the end of this manual)

Front Panel................................................................i

Remote Control ...................................................... ii

Sound output in each sound field program......... iii

GPL/LGPL...............................................................v

List of remote control codes ..................................ix

Contents

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

APPENDIX

“

A

MASTER ON/OFF” or “

1

DVD” (example) indicates

the name of the parts on the front panel or the remote control.

Refer to the attached sheet or the pages at the end of this

manual for the information about each position of the parts.

Notices

2 En

Note on source code distribution

This product includes software code subject to the GNU General

Public License (GPL) or the GNU Lesser General Public License

(LGPL). The copy, distribution, or change of this software code is

licensed under the terms of the GPL or the LGPL. The source

code is available at the following website:

http://www.global.yamaha.com/download/

The source code is also available on a physical media (such as a

CD-ROM) at actual cost.

Contact: AV products division, YAMAHA CORPORATION,

10-1 Nakazawa-cho, Naka-ku, Hamamatsu 430-8650,

Japan

In principle, the source code is offered for 3 years from the day of

purchase.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

Manufactured under license under U.S. Patent No’s:

5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535

& other U.S. and worldwide patents issued & pending. DTS is a

registered trademark and the DTS logos, Symbol, DTS-HD and

“iPod” is a trademark of Apple Inc., registered in the U.S. and

other countries.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

This receiver supports network connections.

“HDMI”, the “HDMI” logo, and “High-Definition Multimedia

Interface” are trademarks or registered trademarks of HDMI

Licensing LLC.

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

Notices

About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the

buttons on the front panel or the ones on the remote

control. In case the button names differ between the front

panel and the remote control, the button name on the

remote control is given in parentheses.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the

manual and product, the product has priority.

• This unit is equipped with GUI display menu language

switching capability. In this manual, the illustrations of the

GUI are examples when you set the GUI language to

English.

•“

A

MASTER ON/OFF” or “

1

DVD” (example)

indicates the name of the parts on the front panel or the

remote control. Refer to the attached sheet or the pages at

the end of this manual for the information about each

position of the parts.

• The symbol “☞ ” with page number(s) indicates the

corresponding reference page(s).

• The shape of the illustration (for example, speaker

terminals, input/output jacks, AC outlets, etc.) in this

manual may vary depending on the model.

iPod

TM

Features

3 En

INTRODUCTION

English

Built-in 7-channel power amplifier

◆ Minimum RMS output power

(20 Hz to 20 kHz, 0.04% THD, 8 Ω)

Front: 140 W + 140 W

Center: 140 W

Surround: 140 W + 140 W

Surround back: 140 W + 140 W

Sound field programs

◆ Proprietary Yamaha technology for the creation of sound

fields

◆ CINEMA DSP 3D mode for creating intensive and accurate

stereoscopic sound field

◆ Compressed Music Enhancer mode to improve the sound

quality of compression artifacts (such as the MP3 format) to

that of a high-quality multi-channel source playback

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

Digital audio decoders

◆ Dolby TrueHD, Dolby Digital Plus decoder

◆ DTS-HD Master Audio, DTS-HD High Resolution Audio

decoder

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx

decoder

◆ DTS NEO:6 decoder

Sophisticated FM/AM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

◆ Radio Data System capability (Europe model only)

HDMI™ (High-Definition Multimedia Interface)

◆ HDMI interface for standard, enhanced or

high-definition video as well as multi-channel digital audio

based on HDMI version 1.3a

◆ Automatic audio and video synchronization (lip sync)

information capability

◆ Deep Color video signal (30/36 bits) transmission capability

◆ High refresh rate and high resolution video signals capability

◆ High definition digital audio format signals capability

◆ Analog video to HDMI digital video up-conversion

(composite video ↔ S-video ↔ component video → HDMI

digital video) capability for monitor out

◆ Analog video up-scaling from 480i (NTSC)/576i (PAL) or

480p/576p to 720p, 1080i or 1080p

iPod controlling capability

◆ DOCK terminal to connect a Yamaha iPod universal dock

(such as the YDS-10, sold separately), which supports iPod

(Click and Wheel), iPod nano, and iPod mini

Network features

◆ NETWORK port to connect a PC and Yamaha MCX-2000 or

access the Internet Radio via LAN

◆ DHCP automatic or manual network configuration

USB features

◆ USB port to connect a USB memory device or a USB portable

audio player

Other features

◆ YPAO (Yamaha Parametric Room Acoustic Optimizer) for

automatic speaker setup

◆ 192-kHz/24-bit D/A converter

◆ GUI (graphical user interface) menus that allow you to

optimize this unit to suit your individual audio/video system

◆ GUI display menu language switching capability

(English, Japanese, French, German, Spanish and Russian)

◆ 6 or 8-channel additional input jacks for discrete multi-

channel input

◆ Analog video interlace/progressive conversion from 480i

(NTSC)/576i (PAL) to 480p/576p

◆ S-video signal input/output capability

◆ Component video input/output capability includes

(3 COMPONENT VIDEO INs and 1 MONITOR OUT)

◆ Optical and coaxial digital audio signal jacks

◆ Pure Direct mode for pure hi-fi sound for all sources

◆ Adaptive dynamic range controlling capability

◆ Adaptive DSP effect level controlling capability

◆ Remote control with preset remote control codes, learning,

macro and buttons and display backlight capability

◆ ZONE 2/ZONE 3 custom installation facility

◆ Zone switching capability between the main zone and

ZONE 2/ZONE 3 using ZONE CONTROLS

◆ Zone 2 video output and displaying OSD (on-screen display)

capability

◆ System Memory capability for saving and recalling multiple

system parameter settings

◆ Sleep timer

Features

4 En

Check that you received all of the following parts.

The form of the supplied accessories varies depending on the models.

Supplied accessories

Note

ON

OFF

CLEAR

LEARN

RENAME

MACRO

REC

FREQ/TEXT EON MODE - PTY SEEK - START

NET RADIO

USB

PC/MCX

VOLUME

EFFECT

STRAIGHT

A/B/C/D/E

SRCH MODE

PURE DIRECT

PRESET/CH

SET MENU

B

AND

LEVEL

CLASSICAL LIVE/CLUB ENTERTAIN MOVIE

STEREO

ENHANCER

SUR. DECODE

3D DSP

TV

SOURCE

AMP

SELECT

TUNER

MD/TAPE DVD BD/HD DVD PHONO

DTV/CBL DVR VCR

CD CD-R

MULTI CH IN

V-AUX/DOCK

SLEEP

AUDIO SEL

POWER

STANDBY

NET/USB

2

+

–

ENTER

MENU

TITLE

MUTE

4

3

ENT

+

10

09

5

1

7

6

8

SYSTEM MEMORY

CH

TV VOL

MEMORY

POWER

–

+

–

+

DISPLAY

AUDIO

TV MUTE

TV INPUT

AV

TV

RETURN

Remote control

Batteries (6)

(AAA, LR03)

AM loop antenna

Optimizer microphoneSpeaker terminal wrench Power cable

(Two for Asia model)

Indoor FM antenna

TUNER

CD

CD-R

MD/TAPE DVD BD/HD DVD

NET/USB

DTV/CBL

VCR

V-AUX/DOCK

DVR

POWER

STANDBY

A/B/C/D/E

PRESET

VOLUME

ZONE 3

ZONE 2

ID2

ID1

MUTE

Zone 2/Zone 3

remote control

Getting started

5 En

INTRODUCTION

English

■ Installing batteries in the remote control

1 Press the part and slide the battery

compartment cover off.

2 Insert the four supplied batteries

(AAA, LR03) according to the polarity

markings (+ and –) on the inside of the

battery compartment.

3 Slide the cover back until it snaps into place.

■ Installing batteries in the Zone 2/Zone 3

remote control

1 Take off the battery compartment cover.

2 Insert the two supplied batteries (AAA, LR03)

according to the polarity markings

(+ and –) on the inside of the battery

compartment.

3 Snap the battery compartment cover back

into place.

• Change all of the batteries if you notice the following

conditions:

– the operation range of the remote control decreases.

– the transmit indicator (P) does not flash or its light becomes

dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• We strongly recommend that you use alkaline batteries.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2

minutes, or if exhausted batteries remain in the remote control,

the contents of the memory may be cleared. When the memory

is cleared, insert new batteries, set up the remote control code

and program any acquired functions that may have been

cleared.

■ VOLTAGE SELECTOR

(Asia and General models only)

Rotate the VOLTAGE SELECTOR clockwise or

counterclockwise to the correct position using a straight

slot screwdriver.

Voltages are as follows:

...................... AC 110/120/220/230–240 V, 50/60 Hz

Getting started

1

3

2

1

3

2

Notes

Caution

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local voltage BEFORE

plugging the power cable into the AC wall outlet.

Improper setting of the VOLTAGE SELECTOR may

cause damage to this unit and create a potential fire

hazard.

230-

240V

VOLTAGE

SELECTOR

Voltage indication

Quick start guide

6 En

The following steps describe the easiest way to enjoy DVD movie playback in your home theater.

In these steps, you need the following supplied

accessories.

❏ AM loop antenna

❏ Indoor FM antenna

❏ Power cable

The following items are not included in the package of this

unit.

❏ Speakers

❏ Front speaker ..................................... x 2

❏ Center speaker ................................... x 1

❏ Surround speaker .............................. x 4

Select magnetically shielded speakers. The

minimum required speakers are two front speakers.

The priority of the requirement of other speakers is

as follows:

1. Two surround speakers

2. One center speaker

3. One (or two) surround back speaker(s)

❏ Active subwoofer ................................... x 1

Select an active subwoofer equipped with an RCA

input jack.

❏ Speaker cable ......................................... x 7

❏ Subwoofer cable ..................................... x 1

Select a monaural RCA cable.

❏ DVD player .............................................. x 1

Select DVD player equipped with coaxial digital

audio output jack and composite video output

jack.

❏ Video monitor.......................................... x 1

Select a TV monitor, video monitor or projector

equipped with a composite video input jack.

❏ Video cable ............................................. x 2

Select an RCA composite video cables.

❏ Digital coaxial audio cable .................... x 1

Quick start guide

Front right

speaker

Subwoofer

Surround back

right speaker

Surround left

speaker

Front left

speaker

Surround back left

speaker

Surround right

speaker

Center

speaker

Video monitor

DVD player

Enjoy DVD playback!

Step 1: Set up your speakers

☞ P. 7

Step 2: Connect your DVD player

and other components

Step 3: Turn on the power and

start playback

☞ P. 8

☞ P. 10

Preparation: Check the items

Quick start guide

7 En

INTRODUCTION

English

Place your speakers in the room and connect them to this

unit.

1 Place your speakers and subwoofer in the

room.

2 Connect speaker cables to each speaker.

3 Connect each speaker cable to the

corresponding speaker terminal of this unit.

1 Make sure that this unit and the subwoofer are

unplugged from the AC wall outlets.

2 Twist the exposed wires of the speaker cables

together to prevent short circuits.

3 Do not let the bare speaker wires touch each other.

4 Do not let the bare speaker wires touch any metal

part of this unit.

Be sure to connect the left channel (L), right channel

(R), “+” (red) and “–” (black) properly.

Front speakers and center speaker

Surround and surround back speakers

4 Connect the subwoofer cable to the

SUBWOOFER PRE OUT jack of this unit and

the input jack of the subwoofer.

Step 1: Set up your speakers

AC IN

AC OUTLETS

HOLDER

WRENCH

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

PRESENCE/ZONE 2/ZONE 3

SP1

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

ANTENNA

FM

GND

AM

75Ω UNBAL.

VIDEO

S VIDEO

MONITOR OUT

VIDEO

REMOTE

PHONO

GND

CD

IN(PLAY)

OUT(REC)

CD-R

HDMI

COMPONENT VIDEO

AUDIO

DOCK

NETWORK

DIGITAL INPUT

MULTI CH INPUT

PRE OUT

TRIGGER OUT

RS-232C

DIGITAL OUTPUT

ZONE OUT

SUB

WOOFER

SUB

WOOFER

CENTER

FRONT(6CH)

FRONT

SURROUND

PRESENCE

SUR.BACK/

SINGLE(SB)

ZONE 2

ZONE 3

ZONE

VIDEO

CD

DVD

DVR

COAXIAL

1

2

1

2

CD

+12V 16mA MAX.

BD/

HD DVD

DTV/

CBL

MD/

TAPE

DVD CD-R

OPTICAL

987

65

4

321

SB(8CH)

DVD

TAPE

MD/

(REC)

(PLAY)

IN

OUT

BD/HD DVD

VCR

DVR 1

DTV/CBL

OUT OUT

ININ

BD/HD DVD

DVD

DTV/CBL

MONITOR OUT

Y

P

R

Y

P

R

P

B

P

B

IN

OUT

IN

OUT

DVR

DTV/

CBL

DVD

BD/

HD DVD

OUT

+

++

A B C

R

L

R

L

R

L

+ + +

R

L

+ +

R

L

+ +

R

L

IN2

IN3

IN4

IN1

SUBWOOFER PRE OUT Speaker terminals

12 3 4

To the front left

speaker

To the front right

speaker

To the center speaker

Loosen Insert Tighten

Speaker terminal wrench

To the surround right

speaker

To the surround left

speaker

To the surround

back left speaker

To the surround back

right speaker

Input jack

AV receiverSubwoofer

Subwoofer cable

Quick start guide

8 En

1 Connect the digital coaxial audio cable to the

digital coaxial audio output jack of your DVD

player and the DVD DIGITAL INPUT COAXIAL

jack of this unit.

y

• When you connect a component that has only a SCART

jack, use an appropriate converter. The connection

between a converter and this unit depends on signals that

are available on the converter. For details, refer to the

instructions of your converter.

• This unit cannot transmit RGB signals.

2 Connect the video cable to the composite

video output jack of your DVD player and the

DVD VIDEO jack of this unit.

3 Connect the video cable to the VIDEO

MONITOR OUT jack of this unit and the video

input jack of your video monitor.

Step 2: Connect your DVD player

and other components

AC IN

AC OUTLETS

HOLDER

WRENCH

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

PRESENCE/ZONE 2/ZONE 3

SP1

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

ANTENNA

FM

GND

AM

75

Ω

UNBAL.

VIDEO

S VIDEO

MONITOR OUT

VIDEO

REMOTE

PHONO

GND

CD

IN(PLAY)

OUT(REC)

CD-R

HDMI

COMPONENT VIDEO

AUDIO

DOCK

NETWORK

DIGITAL INPUT

MULTI CH INPUT

PRE OUT

TRIGGER OUT

RS-232C

DIGITAL OUTPUT

ZONE OUT

SUB

WOOFER

SUB

WOOFER

CENTER

FRONT(6CH)

FRONT

SURROUND

PRESENCE

SUR.BACK/

SINGLE(SB)

ZONE 2

ZONE 3

ZONE

VIDEO

CD

DVD

DVR

COAXIAL

1

2

1

2

CD

+12V 16mA MAX.

BD/

HD DVD

DTV/

CBL

MD/

TAPE

DVD CD-R

OPTICAL

987

65

4

321

SB(8CH)

DVD

TAPE

MD/

(REC)

(PLAY)

IN

OUT

BD/HD DVD

VCR

DVR 1

DTV/CBL

OUT OUT

ININ

BD/HD DVD

DVD

DTV/CBL

MONITOR OUT

Y

P

R

Y

P

R

P

B

P

B

IN

OUT

IN

OUT

DVR

DTV/

CBL

DVD

BD/

HD DVD

OUT

+

A B C

R

L

R

L

R

L

+ + +

R

L

+ +

R

L

+ +

R

L

IN2

IN3

IN4

IN1

Make sure that this unit and the DVD

player are unplugged from the AC

wall outlets.

VIDEO MONITOR OUTDVD VIDEO

DVD DIGITAL INPUT

COAXIAL

AC IN

Digital coaxial

audio output

jack

Digital coaxial audio

cable

DVD DIGITAL INPUT

COAXIAL jack

DVD player

AV receiver

Composite video

output jack

Video cable

DVD VIDEO jack

DVD player

AV receiver

Video monitor

AV receiver

Video cable

VIDEO MONITOR OUT

jack

Video input

jack

Quick start guide

9 En

INTRODUCTION

English

4 Connect the supplied AM loop antenna and

indoor FM antenna to this unit.

The types of the supplied indoor FM antenna and the FM

antenna terminal of this unit are different depending on the

models.

Connecting the wire of the AM loop antenna

y

The wire of the AM loop antenna does not have any polarity

and you can connect either end of the wire to AM or GND

terminal.

Assembling the supplied AM loop antenna

5 Connect the supplied power cable to AC IN of

this unit and then plug the power cable and

other components into the AC wall outlet.

y

• This unit is equipped with AC OUTLET(S) that provide(s)

power to other components (except Korea model). See

page 32 for details.

• (Asia model only) Select one of the supplied power cables

suitable for the type of AC wall outlet in your location

before plugging this into the AC wall outlet.

Note

Indoor FM antenna

AM loop antenna

Open the lever

Insert

Close the lever

For further connections

• Using other kinds of speaker combinations

☞ P. 13

• Connecting a video monitor via various ways of

connection ☞ P. 23

• Connecting a DVD player via various ways of

connection ☞ P. 25

• Connecting a DVD recorder or a digital video

recorder ☞ P. 26

• Connecting a set-top box ☞ P. 26

• Connecting a CD player, an MD recorder, or a

turntable ☞ P. 27

• Connecting an external amplifier ☞ P. 28

• Connecting a DVD player via multi-channel analog

audio connection ☞ P. 29

• Connecting a Yamaha iPod universal dock ☞ P. 30

• Using the REMOTE IN/OUT jacks ☞ P. 30

• Using the VIDEO AUX jacks on the front panel

☞ P. 30

• Connecting FM/AM antennas ☞ P. 32

• Connecting this unit to your network ☞ P. 31

• Connecting a USB device ☞ P. 65

General connection information

• General information on jacks and cable plugs

☞ P. 20

• General information on HDMI ☞ P. 21

• Speaker impedance settings ☞ P. 33

Quick start guide

10 En

1 Turn on the video monitor connected to this

unit.

2 Press

A

MASTER ON/OFF inward to the ON

position on the front panel.

3 Rotate the

C

INPUT selector to set the input

source to “DVD”.

y

• The recommended sound field program is set for each

input source (DVD, etc.). You can also use various sound

field programs and other sound modes for playback. Refer

to the following pages for details:

– see pages 50 and 68 to use various sound field

programs

– see page 50 to turn on or off the sound effect

– see page 51 to use the pure direct mode for high

fidelity sound

• You can also set the input source to “TUNER” to use the

FM/AM tuning feature. For information on the FM/AM

tuning, see pages 53 to 55.

4 Start playback of the desired DVD on your

player.

5 Rotate

R

VOLUME to adjust the volume.

■ After using this unit...

Press

B

MAIN ZONE ON/OFF to set this unit to

the standby mode.

This unit is set to the standby mode and consumes a small

amount of power in order to receive infrared signals from

the remote control. To turn on this unit from the standby

mode, press

B

MAIN ZONE ON/OFF on the front panel

(or

9

POWER on the remote control). See page 33 for

details.

Step 3: Turn on the power and start

playback

Check the type of the connected speakers.

If the speakers are 6-ohm speakers, set “SPEAKER

IMP.” to “6Ω MIN” before using this unit (see

page 120). You can also use 4-ohm speakers as the

front speakers (see page 33).

Quick start guide

11 En

INTRODUCTION

English

n

What do you want to do with this unit?

Using various input sources

• Basic operations of this unit ☞ P. 41

• Enjoying FM/AM radio programs ☞ P. 53

• Enjoying Radio Data System programs ☞ P. 56

• Using your iPod with this unit ☞ P. 59

• Enjoying the contents stored on your PC ☞ P. 61

• Enjoying Internet radio programs and Podcasts

☞ P. 64

• Using USB devices with this unit ☞ P. 65

Using various sound features

• Using various sound field programs ☞ P. 45

• Using the Pure Direct mode for high fidelity sound

☞ P. 51

• Adjusting the tonal quality of the speakers

☞ P. 51

• Customizing the sound field programs ☞ P. 71

Adjusting the parameters of this unit

• Automatically optimizing the speaker parameters for

your listening room (Auto Setup) ☞ P. 37

• Setting the remote control ☞ P. 103

Additional features

• Displaying the current input source signal

information in the GUI ☞ P. 96

• Saving and recalling the system settings of this unit

(System Memory) ☞ P. 98

• Using headphones ☞ P. 42

• Using this unit in multiple rooms simultaneously

(multi-zone configuration) ☞ P. 115

• Automatically turning off this unit ☞ P. 43

Manually adjusting various parameters

of this unit

• Setting the language of the GUI menu ☞ P. 97

• Assigning the input/output jacks of this unit

☞ P. 79

• Setting the parameters for each input source

☞ P. 78

• Setting the parameters related to the volume level

☞ P. 81

• Adjusting the tonal quality of each channel manually

by using the parametric equalizer ☞ P. 82

• Adjusting the audio and video synchronization

☞ P. 84

• Muting the selected speaker channel ☞ P. 85

• Setting the parameters related to the video signals

☞ P. 86

• Setting the basic speaker configuration ☞ P. 88

• Setting the network parameters ☞ P. 91

• Setting the parameters of the multi-zone feature

☞ P. 93

• Protecting the various settings ☞ P. 95

Adjusting the advanced parameters

• Setting the speaker impedance of the connected

speakers ☞ P. 120

• Setting the language of the GUI menu ☞ P. 123

• Setting the video format of the connected video

monitor ☞ P. 123

• Setting the parameters of this unit to default values

☞ P. 134

Connections

12 En

A TRIGGER OUT jack

This is a control expansion terminal for custom

installation. Consult your dealer for details.

A RS-232C terminal

This is a control expansion terminal for factory use only.

Consult your dealer for details.

Connections

Rear panel

AC IN

AC OUTLETS

HOLDER

WRENCH

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

PRESENCE/ZONE 2/ZONE 3

SP1

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

ANTENNA

FM

GND

AM

75Ω UNBAL.

VIDEO

S VIDEO

MONITOR OUT

VIDEO

REMOTE

PHONO

GND

CD

IN(PLAY)

OUT(REC)

CD-R

HDMI

COMPONENT VIDEO

AUDIO

DOCK

NETWORK

DIGITAL INPUT

MULTI CH INPUT

PRE OUT

TRIGGER OUT

RS-232C

DIGITAL OUTPUT

ZONE OUT

SUB

WOOFER

SUB

WOOFER

CENTER

FRONT(6CH)

FRONT

SURROUND

PRESENCE

SUR.BACK/

SINGLE(SB)

ZONE 2

ZONE 3

ZONE

VIDEO

CD

D

VD

D

VR

COAXIAL

1

2

1

2

CD

+12V 16mA MAX.

BD/

HD DVD

DTV/

CBL

MD/

TAP E

DVD CD-R

OPTICAL

987

65

4

321

SB(8CH)

DVD

TAP E

MD/

(REC)

(PLAY)

IN

OUT

BD/HD DVD

VCR

DVR

DTV/CBL

OUT OUT

ININ

BD/HD DVD

DVD

DTV/CBL

MONITOR OUT

Y

P

R

Y

P

R

P

B

P

B

IN

OUT

IN

OUT

DVR

DTV/

CBL

DVD

BD/

HD DVD

OUT

+

++

A B C

R

L

R

L

R

L

+++

R

L

++

R

L

++

R

L

IN2

IN3

IN4

IN1

1

89 0 A B

23 4 567

Name Page

1 HDMI connectors

21

2 COMPONENT VIDEO jacks

23 – 26

3 Audio component jacks

27

REMOTE IN/OUT jacks

30

4 Video component jacks

23 – 26

5 ANTENNA terminals

32

6 VOLTAGE SELECTOR

(Asia and General models only)

32

7 AC IN

32

AC OUTLET(S)

32

8 DOCK terminal

30

9 NETWORK port

31

0 DIGITAL INPUT/OUTPUT jacks

24

B MULTI CH INPUT jacks

29

PRE OUT jacks

28

ZONE OUT jacks

115

Speaker terminals

15

WRENCH HOLDER

18

13 En

Connections

PREPARATION

English

The speaker layout below shows the speaker setting we recommend. You can use it to enjoy the CINEMA DSP and

multi-channel audio sources.

■ 7.1-channel speaker layout

7.1-channel speaker layout is highly recommended for playback the sound of high definition audio formats (Dolby

TrueHD, DTS-HD Master Audio, etc.) as well as the conventional audio sources with sound field programs. See page 15

for connection information.

y

We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 17 for

details.

Front left and right speakers

The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the

ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a

center speaker, you can do without it. Best results, however, are obtained with the full system.

Surround left and right speakers

The surround speakers are used for effect and surround sounds.

Surround back left and right speakers

The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions.

Subwoofer

The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is

effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the high fidelity

sound of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the

subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer

near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

Placing speakers

SW

FR

FL

SBR

SBL

SL

SR

C

60˚

30˚

SB

SBL

FL

FR

C

SL

SR

80˚

SL

1.8 m (6 ft)

Speaker indications

FL/FR: Front left/right

C: Center

SL/SR: Surround left/right

SBL/SBR: Surround back left/right

SW: Subwoofer

30 cm (12 in) or more

14 En

Connections

■ 6.1-channel speaker layout

See page 15 for connection information.

y

We recommend that you also add the presence speakers for the

effect sounds of the CINEMA DSP sound field program. See

page 17 for details.

Front left and right speakers

Center speaker

Surround left and right speakers

Subwoofer

The functions and settings of each speaker are the same as

those for the 7.1-channel speaker layout (see page 13).

Surround back speaker

Connect a single surround speakers to the SURROUND

BACK SINGLE speaker terminal and place the single

surround back speaker behind the listening position. The

surround back left and right channel signals are mixed

down and output at the single surround back speaker when

you set “Surround Back” to “Small x1” or “Large x1” (see

page 89).

■ 5.1-channel speaker layout

See page 15 for connection information.

y

We recommend that you also add the presence speakers for the

effect sounds of the CINEMA DSP sound field program. See

page 17 for details.

Front left and right speakers

Center speaker

Subwoofer

The functions and settings of each speaker are the same as

those for the 7.1-channel speaker layout (see page 13).

Surround left and right speakers

Connect the surround speakers to the SURROUND

speaker terminals even if you place the surround speakers

behind the listening position. For the smooth and

unbroken sound field behind the listening position, place

the surround left and right speakers farther back compared

with the placement in the 7.1-channel speaker layout. The

surround back channel signals are directed to the surround

left and right speakers when “Surround Back” is set to

“None” (see page 89).

SW

FR

FL

SB

SL

SR

C

1.8 m (6 ft)

60˚

30˚

SB

FL

FR

C

SL

SR

80˚

SL

Speaker indications

FL/FR: Front left/right

C: Center

SL/SR: Surround left/right

SB: Surround back left/right

SW: Subwoofer

SW

FR

FL

SL

SR

C

60˚

30˚

FL

FR

C

SL

SR

80˚

SL

1.8 m (6 ft)

Speaker indications

FL/FR: Front left/right

C: Center

SL/SR: Surround left/right

SW: Subwoofer

For other speaker combinations

You can enjoy multi-channel sources with sound field programs by using a speaker combination other than the 7.1/

6.1/5.1-channel speaker combinations.

Use the automatic setup feature (see page 37) or set the “Speaker Set” parameters in “Manual Setup” (see page 88) to

output the surround sounds at the connected speakers.

15 En

Connections

PREPARATION

English

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,

this unit cannot reproduce the input sources accurately.

• A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a

stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the

plain cable to the “–” (black) terminals.

• You can use the SP1 terminals to connect the Zone 2 or Zone 3 speakers as well as the presence speakers (see page 116).

■ For the 7.1-channel speaker setting

Connecting speakers

Caution

• Before connecting the speakers, make sure that this unit is turned off (see page 33).

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could

damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the

speakers away from the monitor.

• If you are to use 6-ohm speakers, be sure to set “SPEAKER IMP.” to “6ΩMIN” before using this unit (see

page 33). You can also use 4-ohm speakers as the front speakers (see page 120).

Notes

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

SUB

WOOFER

+

R

L

+ + +

R

L

+ +

R

L

+ +

R

L

Front speakers

Surround speakers

Subwoofer

Left

Center speaker

Surround back speakers

Right

Left

Right

Zone 2 or Zone 3

speakers

(see page 115)

16 En

Connections

■ For the 6.1-channel speaker setting

■ For the 5.1-channel speaker setting

Surround back speakers

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

SUB

WOOFER

+

R

L

+ +

L

+ +

R

L

+ +

R

L

Front speakers

Surround speakers

Subwoofer

Left

Center speaker

Left

Right

Zone 2 or Zone 3

speakers

(see page 115)

SPEAKERS

CENTER

BI-AMP

SURROUND BACK/

FRONT

SURROUND

ZONE 2/ZONE 3

SINGLE

SP2

SUB

WOOFER

+

R

L

+ + +

R

L

+ +

R

L

+ +

R

L

Front speakers

Surround speakers

Subwoofer

Center speaker

Left

Right

Zone 2 or Zone 3

speakers

(see page 115)

Front speakers for the

bi-amplification

connections

(see page 19)

17 En

Connections

PREPARATION

English

The presence speakers supplement the sound from the front speakers with extra ambient effects produced by the sound

field programs (see page 45). Presence left and right speakers function more effectively when the CINEMA DSP 3D

mode is active (see page 50). You can adjust the vertical position of dialogues with using the presence speakers (see

page 72). To use the presence speakers, connect the speakers to SP1 speaker terminals and then set “Presence” to “Yes”

(see page 89).

• If “Presence” is set to “None”, this unit cannot activate the CINEMA DSP 3D mode.

• You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously. This unit

automatically switches the presence speakers and surround back speakers depending on the input sources and the selected sound field

programs. You can set to prioritize either set of speakers using the “PR/SB Priority” parameter in “Basic” (see page 90).

■ Connecting presence left and right speakers

Using presence speakers

Notes

FR

PRPL

C

FL

1.8 m

(6 ft)

0.5 to 1 m (1 to 3 ft) 0.5 to 1 m (1 to 3 ft)

1.8 m

(6 ft)

Speaker indications

FL: Front left

FR: Front right

C: Center

PL: Presence left

PR: Presence right

SPEAKERS

PRESENCE/ZONE 2/ZONE 3

SP1

+ +

R

L

Presence speakers

Right Left

18 En

Connections

■ Connecting the speaker cable

1 Remove approximately 10 mm (0.4 in) of

insulation from the end of each speaker

cable and then twist the exposed wires of the

cable together to prevent short circuits.

2 Loosen the knob using the supplied speaker

terminal wrench.

3 Insert one bare wire into the hole on the side

of each terminal.

4 Tighten the knob to secure the wire using the

supplied speaker terminal wrench.

5 Hook the speaker terminal wrench onto the

WRENCH HOLDER on the rear panel of this

unit when not in use.

■ Connecting to the SP2 speaker

terminals

Connect Zone 2 or Zone 3 speakers to these terminals (see

page 115).

1 Open the tab.

2 Insert one bare wire into the hole on the

terminal.

3 Close the tab to secure the wire.

10 mm (0.4 in)

Speaker terminal wrench

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Sayfa yükleniyor...

Yamaha RX-V3800 El kitabı

Yamaha RX-V3800 El kitabı

diğer dillerde

İlgili makaleler

Diğer belgeler