Siemens VB558C0S0/04 Kullanma talimatları

Kategori
Fırınlar
Tip
Kullanma talimatları
/TYZX[IZOUTSGT[GR 
Instrucciones de uso ............................25
Instruções de serviço ........................... 48
Kullanma kιlavuzu ............................... 70
Built-in oven
Horno integrado
Forno de encastrar
Ankastre fırın
VB558C0S0
en
3
Table of contents
Instruct ion manual
8 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
( Important safety information . . . . . . . . . . . . . . . 4
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 5
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . . . . . . . . . . . . . . 6
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Environmentally-friendly disposal . . . . . . . . . . . . . . . . . 6
* Getting to know your appliance . . . . . . . . . . . . . 7
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Types of heating and functions . . . . . . . . . . . . . . . . . . 7
Temperature selector . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cooking compartment functions . . . . . . . . . . . . . . . . . 8
_ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Shelf positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Locking function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Telescopic rail set . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Special accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 10
K Before using for the first time. . . . . . . . . . . . . . 11
Setting the time on the clock . . . . . . . . . . . . . . . . . . . 11
Baking out the oven . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the accessories. . . . . . . . . . . . . . . . . . . . . . 11
Fitting the telescopic shelf set . . . . . . . . . . . . . . . . . . 11
1 Operating the appliance . . . . . . . . . . . . . . . . . . 12
Switching the oven on and off . . . . . . . . . . . . . . . . . . 12
Automatic safety switch-off function . . . . . . . . . . . . . . 12
O Time-setting options . . . . . . . . . . . . . . . . . . . . . 12
Overview of the time-setting options . . . . . . . . . . . . . 12
Operating the electronic clock . . . . . . . . . . . . . . . . . . 12
Setting the automatic timer . . . . . . . . . . . . . . . . . . . . 13
A Childproof lock. . . . . . . . . . . . . . . . . . . . . . . . . . 14
Activating the childproof lock . . . . . . . . . . . . . . . . . . . 14
Deactivating the childproof lock. . . . . . . . . . . . . . . . . 14
Q Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
List of basic settings . . . . . . . . . . . . . . . . . . . . . . . . . 14
Changing the basic settings. . . . . . . . . . . . . . . . . . . . 14
Setting energy-saving mode. . . . . . . . . . . . . . . . . . . .15
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Suitable cleaning agents . . . . . . . . . . . . . . . . . . . . . .15
Surfaces in the cooking compartment . . . . . . . . . . . .16
Keeping the appliance clean . . . . . . . . . . . . . . . . . . .16
Cleaning the cooking compartment . . . . . . . . . . . . . .16
p Rails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Detaching the shelf supports . . . . . . . . . . . . . . . . . . .17
Refitting the shelf supports. . . . . . . . . . . . . . . . . . . . .17
q Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Removing and installing the door panels . . . . . . . . . .18
Removing and fitting the appliance door . . . . . . . . . .18
3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 19
Fault messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Replacing the oven light bulb. . . . . . . . . . . . . . . . . . .20
4 Customer service. . . . . . . . . . . . . . . . . . . . . . . . 20
E number and FD number . . . . . . . . . . . . . . . . . . . . .20
J Tested for you in our cooking studio. . . . . . . . 21
Table of dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
User tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Test dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Produktinfo
Additional information on products, accessories,
replacement parts and services can be found at
www.siemens-home.bsh-group.com and in the online
shop www.siemens-home.bsh-group.com/eshops
en Intended use
4
8Intended use
I nt ended use
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for future
use or for subsequent owners.
This appliance is only intended to be fully fitted
in a kitchen. Observe the special installation
instructions.
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused by
incorrect connection is not covered under
warranty.
This appliance is intended for domestic use
only. The appliance must only be used for the
preparation of food and drink. The appliance
must be supervised during operation. Only
use this appliance indoors.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
This appliance is not intended for operation
with an external clock timer or a remote
control.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 15 years old and are
being supervised.
Keep children below the age of 8 years old at
a safe distance from the appliance and power
cable.
Always slide accessories into the cooking
compartment the right way round.
~ "Accessories" on page 9
(Important safety
information
Impor t ant saf et y informat i on
General information
:Warning – Risk of fire!
Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug it from the mains or
switch off the circuit breaker in the fuse box.
Risk of fire!
Loose food remnants, fat and meat juices
may catch fire. Before using the appliance,
remove the worst of the food remnants from
the cooking compartment, heating elements
and accessories.
Risk of fire!
A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
:Warning – Risk of burns!
The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of serious burns!
Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with care.
Risk of burns!
The telescopic shelves become hot when
the appliance is in use. Take special care
not to get burnt when they are pulled out.
:Warning – Risk of scalding!
The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
Causes of damage en
5
When you open the appliance door, hot
steam can escape. Steam may not be
visible, depending on its temperature. When
opening, do not stand too close to the
appliance. Open the appliance door
carefully. Keep children away.
Risk of scalding!
Water in a hot cooking compartment may
create hot steam. Never pour water into the
cooking compartment when the cooking
compartment is hot.
:Warning – Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
Risk of injury!
The hinges on the appliance door move
when opening and closing the door, and
you may be trapped. Keep your hands away
from the hinges.
Risk of injury!
Components inside the appliance door may
have sharp edges. Wear protective gloves.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact
the after-sales service.
Risk of electric shock and serious injury!
The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact with
hot parts of the appliance.
Risk of electric shock!
Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk of electric shock!
When replacing the cooking compartment
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Risk of electric shock!
A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
]Causes of damage
Causes of damage
General information
Caution!
Accessories, foil, greaseproof paper or ovenware on
the cooking compartment floor: do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor if a
temperature of over 50 ºC has been set. This will
cause heat to accumulate. The baking and roasting
times will no longer be correct and the enamel will
be damaged.
Aluminium foil: Aluminium foil in the cooking
compartment must not come into contact with the
door glass. This could cause permanent
discolouration of the door glass.
Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
Moisture in the cooking compartment: Over an
extended period of time, moisture in the cooking
compartment may lead to corrosion. Allow the
cooking compartment to dry after use. Do not keep
moist food in the closed cooking compartment for
extended periods of time. Do not store food in the
cooking compartment.
Cooling with the appliance door open: Following
operation at high temperatures, only allow the
cooking compartment to cool down with the door
closed. Do not trap anything in the appliance door.
Even if the door is only left open a crack, the front of
nearby furniture may become damaged over time.
Only leave the cooking compartment to dry with the
door open if a lot of moisture was produced whilst
the oven was operating.
Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains that
cannot be removed. If possible, use the deeper
universal pan.
Extremely dirty seal: If the seal is very dirty, the
appliance door will no longer close properly during
operation. The fronts of adjacent units could be
damaged. Always keep the seal clean. Never
operate the appliance if the seal is damaged or
missing. ~ "Cleaning" on page 15
Appliance door as a seat, shelf or worktop: Do not
sit on the appliance door, or place or hang anything
on it. Do not place any cookware or accessories on
the appliance door.
Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
en Environmental protection
6
7Environmental protection
En v i r o n ment al pr ot ec t i on
Your new appliance is particularly energy-efficient.
Here you can find tips on how to save even more
energy when using the appliance, and how to dispose
of your appliance properly.
Saving energy
Only preheat the appliance if this is specified in the
recipe or in the tables in the operating instructions.
Leave frozen food to defrost before placing it in the
cooking compartment.
Use baking tins that are dark-coloured, painted black
or have an enamel coating. These absorb the heat
particularly well.
Remove any unnecessary accessories from the
cooking compartment.
Open the appliance door as infrequently as possible
when the appliance is in use.
It is best to bake several cakes one after the other.
The cooking compartment stays warm. This reduces
the baking time for the second cake. You can place
two cake tins next to each other in the cooking
compartment.
For longer cooking times, you can switch the
appliance off 10 minutes before the end of the
cooking time and use the residual heat to finish
cooking.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment -
WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Getting to know your appliance en
7
*Getting to know your
appliance
Get t i ng to know your appl i ance
In this section, we will explain the indicators and
controls. You will also find out about the various
functions of your appliance.
Note: Depending on the appliance model, individual
details and colours may differ.
Control panel
You can set your appliance's various functions on the
control panel. Below, you will see an overview of the
control panel and the layout of the controls.
Buttons
You will find a brief explanation of the various buttons
below.
If a button is not operational, an audible signal will
sound.
--------
Display
The display is structured so that the information can be
read at a glance.
The value that you can currently set is in focus. It is
displayed in white lettering with a dark background.
--------
Types of heating and functions
Use the function selector to set the types of heating and
other functions.
To make sure you always use the right type of heating
to cook your food, we have explained the differences
and applications below.
(
Buttons and display
The buttons are touch keys with sensors
underneath. Simply touch a symbol to select the
function.
The display shows symbols for active functions
and the time-setting options.
0
Function selector
Use the function selector to set the heating
function or other functions. Your chosen heating
function or other function will light up.
You can turn the function selector clockwise or
anti-clockwise from the "Off" position.
8
Temperature selector
Use the temperature selector to set the
temperature for the heating function or select the
setting for other functions.
You can also turn the temperature selector
clockwise or anti-clockwise. It does not have an
"Off" position.
Button Explanation
v
Time-setting
options
Set the timer V, duration x,
end time y and clock time v
A
Minus Reduce the setting value
@
Plus Increase the setting value
=
Lighting Switch the interior lighting on/off
c1
Rapid heat-up Switch rapid heat-up on/off
Childproof lock Activate and deactivate the child-
proof lock in standby mode
Symbol Explanation
c
Rapid heat-up
V
Timer
x
Duration
y
End time
v
Clock time
‰‰:‰‰
Time
_
Temperature indicator
'
Childproof lock
H
Door lock
‰‰‰
Temperature
en Getting to know your appliance
8
--------
Note: For each heating function, the appliance specifies
a default temperature or level. You can accept this
value or change it in the appropriate area.
Temperature selector
Use the temperature selector to set the temperature.
The temperature that has been set will be shown on the
display.
Note: The temperature can be set in 1 degree
increments up to 100 °C, and in 5 degree increments
thereafter.
Temperature indicator
The temperature indicator bars show the heating-up
phases or residual heat in the cooking compartment.
Cooking compartment functions
Some functions make your appliance easier to use.
This, for example, enables the cooking compartment to
be well lit and a cooling fan to prevent the appliance
from overheating.
Opening the appliance door
If you open the appliance door during an operation, the
operation is paused. Operation continues to run when
you close the door.
Heating function Temperature/setting Use
Þ
"Off" position - In this position, the oven is switched off.
:
3D hot air 50-280 °C For cooking food on one or two levels. The fans distribute the heat from the ring-
shaped heating elements in the back panel evenly around the cooking compartment.
This heating function is used to measure the energy consumption in air recirculation
mode.
2
Air recirculation 50-280 °C For baking cakes and baked items on one level. The fans distribute the heat from the
heating elements evenly around the cooking compartment.
G
Pizza setting 50-280 °C For cooking fresh pizza and frozen products, e.g. chips or strudel.The heating ele-
ments and fans heat quickly and distribute the heat evenly around the cooking com-
partment.
?
Defrosting 30-60 °C For defrosting, e.g. meat, poultry, bread and cakes. The fan causes the warm air to
circulate around the food.
$
Bottom heating 50-280 °C Use when you want to cook the food for a little longer. The heat is emitted only from
below.
*
Centre-area grill Grill settings:
1 = low
2 = medium
3 = high
For grilling small amounts of steak, sausages, bread and pieces of fish. The centre
part of the grill heating element becomes hot.
(
Full-surface grill Grill settings:
1 = low
2 = medium
3 = high
For grilling flat items, such as steaks or sausages, for making toast, and for browning
food.
The whole area below the grill element becomes hot.
4
Circulated air grill 50-280 °C For baking or roasting meat, poultry and whole fish. The fan causes the hot air to cir-
culate around the food.
8
Top/bottom heating gentle 50-280 °C For gently cooking selected types of food (e.g. meat, vegetables) on one level with-
out preheating.
This heating function is unsuitable for food that rises as it bakes (e.g. bread).
This heating function is used to measure both the energy consumption in the conven-
tional mode and the energy efficiency class.
%
Top/bottom heating 50-280 °C For cakes, bakes and lean joints. Heat is emitted evenly from above and below.
Heating-up indica-
tor
The heating-up indicator displays the rising tem-
perature in the cooking compartment. When all
bars are filled, the optimal time for placing the
food in the oven has been reached.
In the grill and cleaning settings, the bars are all
already filled at the start.
The bars are not filled for the gentle top/bottom
heating heating type.
Residual heat
indicator
When the appliance is switched off, the tempera-
ture indicator shows the residual heat in the cook-
ing compartment. Once the temperature has
dropped to approximately 60 °C, the indicator
goes out.
Accessories en
9
Interior lighting
When you open the appliance door, the interior lighting
switches on.If the door remains open for longer than
15 minutes, the lighting switches off again.
In most operating modes, the interior lighting will switch
on as soon as the appliance is started. Once the
program is complete, the lighting will switch off.
Note: In "Top/bottom heating gentle" mode, the interior
lighting will be switched off automatically after
approx. 1 minute. It can be switched on using the
= button.
Cooling fan
The cooling fan switches on and off as required. The
warm air escapes above the door.
Caution!
Do not cover the ventilation slots, otherwise the oven
will overheat.
To cool the cooking compartment more quickly after
operation, the cooling fan continues to run for a certain
period afterwards.
_Accessories
Ac c e s s o r i e s
Your appliance is accompanied by a range of
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.
--------
Shelf positions
The baking tray and the baking and roasting shelf can
be moved into four different heights within the cooking
compartment. Always insert them as far as they will go
so that the accessories do not touch the door panel.
Ensure that you always insert the accessories into the
cooking compartment the right way round.
:Warning – Risk of fire!
Under no circumstances should a roasting tin, baking
tray, frying pan or any other form of cookware be
placed directly on the oven floor. This causes the floor
of the appliance to overheat and can seriously damage
the appliance.
Locking function
The accessories can be pulled out approximately
halfway before they lock in place.The locking function
prevents the accessories from tilting when they are
Accessories Description
Baking and roasting shelf
For cookware, cake tins, joints of
meat, grilled items and frozen food.
Universal pan
For moist cakes, pastries, frozen
meals and large roasts. The universal
pan can be used to catch dripping fat
when you are grilling directly on the
wire rack.
Enamel baking tray
For tray bakes and small baked prod-
ucts.
Telescopic rail set
You can use the pull-out rails to pull
the accessories out further.
Locking pins
For locking the hinges.
en Accessories
10
pulled out.The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that the lug
is at
the rear and is facing downwards. The open side must
be facing the appliance door and the curvature must be
at the bottom (i.e. ¾).
When inserting baking trays, ensure that the lug is at
the rear and is facing downwards. The sloping edge of
the accessory ƒ must be facing towards the appliance
door.
Example in the picture: Universal pan
Telescopic rail set
:Warning – Risk of burns!
The telescopic shelves become hot when the appliance
is in use. Take special care not to get burnt when they
are pulled out.
The pull-out rails allow you to pull accessories out
completely. When inserting the adapter for the baking
tray and roasting shelf, ensure that it locks into place in
front of the tab on the pull-out rails.
Special accessories
You can buy accessories from the after-sales service.
--------
D
D
D
D
E
Accessories Description
Enamelled baking tray For tray bakes and small baked items.
After-sales service number:
11012235
Universal pan For moist cakes, pastries, frozen
meals and large roasts.
The universal pan can be used to
catch dripping fat when you are grill-
ing directly on the wire rack.
After-sales service number:
11012236
Baking and roasting shelf For cookware, cake tins, joints of
meat, grilled items and frozen food.
After-sales service number:
00776605
Telescopic shelf set Telescopic shelf set for one level.
After-sales service number:
12006236
Before using for the first time en
11
KBefore using for the first
time
Be f o r e usi ng for the first ti me
In this section, you can find out what you must do
before using your oven to prepare food for the first time.
Remove the appliance packaging and dispose of it
appropriately.
Setting the time on the clock
Once the appliance is connected to a power supply,
‚ƒ:‹‹ will flash on the display and the v symbol will
be continuously lit. Set the time.
1. Use the A or @ button to set the time.
2. Press the v button.
Note: Once the period allowed for setting the clock
time has elapsed, the clock time will automatically
be saved.
The time has now been set.
Baking out the oven
Precleaning the oven
1. Remove the accessories and the shelf supports from
the cooking compartment. ~ "Rails" on page 17
2. Completely remove any leftover packaging, e.g.
small pieces of polystyrene, from the cooking
compartment.
3. Some parts are covered with a protective film.
Remove this scratch protection film.
4. Clean the outside of the appliance with a soft, damp
cloth.
5. Clean the cooking compartment with hot soapy
water.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed.
Note: Make sure that there is no leftover packaging,
such as polystyrene pellets, in the cooking
compartment. Before heating up the appliance, wipe
the smooth surfaces in the cooking compartment with a
soft, damp cloth.Keep the kitchen ventilated while the
appliance is heating.
1. Turn the function selector to %.
2. Turn the temperature selector to the maximum
temperature.
3. Switch the oven off after 1 hour.
Note: When the appliance is heating up for the first
time, you may hear crackling noises coming from the
oven.
Recleaning the oven
1. Clean the cooking compartment with hot soapy
water.
2. Refit the hook-in racks.
3. If necessary, clean the door panels. ~ "Appliance
door" on page 18
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
Fitting the telescopic shelf set
Instructions on fitting the telescopic shelf set are
enclosed with the set.
en Operating the appliance
12
1Operating the appliance
Oper at i ng the appl i ance
Switching the oven on and off
Switching on the oven
1. Use the function selector to set the heating function.
Note: Each function has a default temperature or
grill setting.
2. Use the temperature selector to alter the
temperature or grill setting.
The oven will then begin to heat.
Note: The temperature indicator will show the current
status of the heating-up phase.
Changing settings
The heating function and temperature or grill setting can
be changed at any time using the relevant selector.
Switching off the oven
Turn the function selector to the "Off" position.
Switching on the rapid heat-up function
To heat up the cooking compartment as rapidly as
possible, press the c1 button.
Note: Rapid heat-up is available for 3D hot air mode, air
recirculation mode, the pizza setting and top/bottom
heating.
Automatic safety switch-off function
The appliance has an automatic safety cut-out function.
The oven switches off automatically after 13 hours.
OTime-setting options
Ti me- s et t i ng opt i ons
Your appliance has different time-setting options.
Overview of the time-setting options
--------
Operating the electronic clock
Setting the timer
The timer has no effect on how the oven works. The
timer duration can be set to between 30 seconds and
13 hours. The duration can be set in 30-second
increments up to 10 minutes, in 1-minute increments
from 10 minutes to 1 hour, and then in 5-minute
increments.
1. Press the v button.
The V symbol will be lit.
2. Use the @ and A buttons to set the required
duration.
An audible signal will sound once the time has
elapsed.
Notes
To change the remaining time, press the v button.
Then change the remaining time using the @ and A
buttons.
To stop the timer counting down, set the remaining
time to zero.
Switching off the signal tone
To switch the signal off, press any button or open the
appliance door.
Note: After a short time, the audible signal will stop
automatically.
Setting the electronic clock
You can alter the clock if you need to (e.g. from
summer to winter time).To do this, the oven must be
switched off.
&
Time-setting option Use
V
Timer The timer functions like an egg
timer. It runs independently of the
appliance when it is heating and
of other time-setting options, and
does not affect the appliance.
v
Clock time When no other function is running
in the foreground, the appliance
will show you the time of day on
the display.
x
Cooking time Once the set cooking time has
elapsed, the appliance will auto-
matically stop heating.
y
End time Enter a cooking time and the
required end time. The appliance
will start up automatically so that
it finishes cooking at the required
time.
Time-setting options en
13
1. Press the v button.
The V symbol will be lit.
2. Press the v button again.
The v symbol will be lit.
3. Use the @ and A buttons to set the current time.
Setting the automatic timer
The electronic clock can be used to switch the oven on
or off automatically.
Setting the cooking time
You can set the cooking time for your food on the
appliance. This prevents the food from accidentally
being cooked for too long, and means that you do not
have to stop what you are doing to switch off the oven.
1. Set the type of heating and the temperature you
require.
The oven will start.
2. Press the v button twice.
3. Use the @ and A buttons to set the required cooking
time.
Note: The cooking time can be set to between
30 seconds and 13 hours. The cooking time can be
set in 1-minute increments up to 1 hour, and then in
5-minute increments.
The x symbol will be lit.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating.
1. To switch the signal off, press any button or open the
appliance door.
Note: After a short time, the audible signal will stop
automatically.
2. Turn the function selector to the "Off" position.
Setting the end time
Baking or roasting starts for the set duration at a later
time which you chose.
1. Set the type of heating and the temperature you
require.
The oven will start.
2. Press the v button twice.
3. Use the @ and A buttons to set the required cooking
time.
Note: The cooking time can be set to between
30 seconds and 13 hours. The cooking time can be
set in 1-minute increments up to 1 hour, and then in
5-minute increments.
The x symbol will be lit.
4. Press the v button again.
5. Use the @ and A buttons to set the end time.
Note: When the button is first pressed, a value will
be suggested on the display. This suggested value
is calculated using the current time on the clock and
the cooking time. This value can be changed using
the @ and A buttons.
The y symbol will be lit. The display will show the
end time. The appliance will now switch to standby
mode.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating.
1. To switch the signal off, press any button or open the
appliance door.
Note: After a short time, the audible signal will stop
automatically.
2. Turn the function selector to the "Off" position.
en Childproof lock
14
AChildproof lock
Ch i l d p r o o f lock
The oven has a childproof lock to prevent children from
switching it on by accident.
Note: If the hob is being used, it will not be affected by
the childproof lock on the oven.
Activating the childproof lock
The appliance must be switched off.
Press and hold the c1 button for approx. 4 seconds.
The ' symbol will appear on the display. The
childproof lock has now been activated.
Deactivating the childproof lock
Press and hold the c1 button for approx. 4 seconds.
The ' symbol will go out on the display. The
childproof lock has now been deactivated.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting will appear on the display,
e.g. ™‹‚ .
2. Use the temperature selector to change the setting
as required.
3. Use the @ button to navigate to the next basic
setting.
Basic setting Options
™‹‚
Audible signal duration upon
completion of a cooking time
or timer duration
= approx. 10 seconds
ƒ = approx. 30 seconds*
= approx. 2 minutes
™‹ƒ
Amount of time until a setting
is applied
= approx. 3 seconds*
ƒ = approx. 6 seconds
= approx. 10 seconds
™‹„
Button tone that sounds when
a button is touched
= off
= on*
™‹…
Brightness of the display illu-
mination
= dark
ƒ = medium*
= bright
™‹†
Display time of day
= hide the time
= display the time*
™‹‡
Interior lighting on when
appliance in operation
= no
= yes*
™‹ˆ
Cooling fan run-on time
= short*
ƒ = medium
= long
= extra long
™‹‰
Reset all values to factory set-
tings
= no*
= yes
™‹Š
Activate demo mode
Demo mode is provided for
demonstration purposes only;
the oven does not actually
heat in Demo mode. Demo
mode can only be activated
within 5 minutes of connect-
ing the appliance to the mains
power supply.
= no*
= yes
* Factory setting
Cleaning en
15
4. Use the A or @ button to continue going through all
the basic settings as described above, and use the
temperature selector if you want to change any of
these settings.
5. When you have finished, press and hold the
v button again for approx. 4 seconds to confirm the
settings.
This applies all the basic settings.
You can change the basic settings again at any time.
Demo mode can only be activated within 5 minutes of
connecting the appliance to the mains power supply.
Note: Your changes to the basic settings will be
retained even after a power failure.
Setting energy-saving mode
You can save energy by reducing the display
brightness.You can set the display brightness under
basic setting ™‹….
Note: This setting changes the brightness of the display
while the appliance is in operation. In standby mode,
the appliance automatically reduces the display
brightness. The display is at its dimmest at night,
between the hours of 22:00 and 05:59.
DCleaning
Cl eani ng
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Suitable cleaning agents
Observe the following information to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent.
Do not use any of the following
on the oven:
Any harsh or abrasive cleaning agents,
Cleaning agents with a high concentration of
alcohol,
Hard scouring pads or sponges,
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Area Cleaning
Appliance exterior
Stainless steel
front
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Control panel Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door han-
dle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.
en Cleaning
16
--------
Notes
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Surfaces in the cooking compartment
The back wall and side parts in the cooking
compartment are self-cleaning. You can tell this from
the rough surface.
The cooking compartment floor and ceiling are
enamelled and have smooth surfaces.
Cleaning enamel surfaces
Clean the smooth enamel surfaces with a dish cloth
and hot soapy water or a vinegar solution. Then dry
them with a soft cloth.
Soften baked-on food remnants with a damp cloth and
soapy water. Use stainless steel wire wool or oven
cleaner to remove stubborn dirt.
Caution!
Never use oven cleaner in the cooking compartment
when it is still warm. This may damage the enamel.
Remove all food remnants from the cooking
compartment and the appliance door before you next
heat up the appliance.
Leave the cooking compartment open to dry after
cleaning it.
Note: Food residues can cause white deposits to form.
These are harmless and do not affect how the
appliance works. You can remove these residues using
lemon juice if required.
Self-cleaning surfaces
The self-cleaning surfaces are coated with a porous,
matte ceramic layer. This coating absorbs and dispels
splashes from baking and roasting while the appliance
is in operation.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This will damage the surfaces.If oven cleaner does get
onto these surfaces, dab it off immediately using water
and a sponge cloth. Do not rub the surfaces or use
abrasive cleaning aids.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
:Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
Use the universal pan for baking very moist cakes.
Use suitable ovenware for roasting, e.g. a roasting
dish.
Cleaning the cooking compartment
1. Pour 0.4 litres of water into the centre of the cooking
compartment floor.
2. Set the $ heating function.
Appliance interior
Enamel surfaces
and self-cleaning
surfaces
Observe the instructions for the surfaces of the
cooking compartment that follow the table.
Glass cover for
the interior light-
ing
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If the cooking compartment is heavily soiled, use
oven cleaner.
Door panels Hot soapy water:
Clean with a dish cloth and dry with a soft cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
It is best to clean the door panels along with the
rest of the cooking compartment. ~ "Cleaning
the cooking compartment" on page 16
Door seal
Do not remove.
Hot soapy water:
Clean with a dish cloth.
Do not scour.
Door cover made from stainless steel:
Use stainless steel cleaner. Follow the manufac-
turers' instructions. Do not use stainless steel
care products.
made from plastic:
Clean using hot soapy water and a dish cloth. Dry
with a soft cloth. Do not use glass cleaner or a
glass scraper.
Remove the door cover for cleaning.
Rails Hot soapy water:
Soak and clean with a dish cloth or brush.
Pull-out system Hot soapy water:
Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails
are pulled out – it is best to clean them when they
are pushed in. Do not clean in the dishwasher.
Accessories Hot soapy water:
Soak and clean using a dishcloth or brush.
If there are heavy deposits of dirt, use a stainless
steel scouring pad.
Enamelled accessories are dishwasher-safe.
Rails en
17
3. Use the temperature controller to set a temperature
of 50 °C.
4. Switch off the appliance after 18 minutes.
5. Allow the appliance to cool down.
6. Clean the cooking compartment with a cloth.
:Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
pRails
Ra i l s
Detaching the shelf supports
The shelf supports are each fixed to the side panels of
the cooking compartment at three points.
1. Grip the front of the shelf support and pull it round to
the middle of the cooking compartment.
The front hook of the shelf support will come out of
the hole.
2. Swing the shelf support round further and pull it out
of the rear holes in the side panel.
3. Remove the shelf supports from the cooking
compartment.
Refitting the shelf supports
1. Insert the hooks of the shelf support into the rear
holes in the side panel.
2. Push the front hook of the shelf support into the
hole.
D
E
en Appliance door
18
qAppliance door
Ap p l i a n c e door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
1. Open the oven door fully.
2. Lock both hinges on the left and right using the
locking pin.
Note: The locking pins must be fully inserted into the
holes in the hinges.
3. Lift the bottom of the inner panel slightly until the
fastening pins come out of the holder (1).
4. Carefully lift the top of the inner panel until the
fastening pins come out of the holder (2).
Caution!
When lifting the inner panel, the middle panel may
stick to the inner panel. Make sure that the middle
panel does not fall.
5. Remove the inner panel.
6. Remove the middle panel.
Note: The middle panel is kept in place with rubber
bushings rather than retaining pins.
Clean the panels with glass cleaner and a soft cloth.
:Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Fitting the door panels
1. Reinsert the middle panel.
Notes
If the Low-E symbol can be read, the middle
panel is inserted correctly.
Make sure that the panel is seated correctly. All
rubber mounts must lay flat against the outer
panel.
2. Reinsert the inner panel.
Note: All four fastening pins must engage in the
holders provided for them.
3. Remove the locking pins and close the oven door.
Removing and fitting the appliance door
If the oven is very heavily soiled, the oven door can be
removed for easier cleaning. Normally, however, this is
not necessary.
Removing the appliance door
1. Open the oven door fully.


Trouble shooting en
19
2. Lock the two hinges on the left and right using the
locking pin (a).
Note: The locking pins must be fully inserted into the
holes in the hinges.
3. Take hold of the sides of the oven door with both
hands and close the oven door by approx. 30° (b).
4. Lift the oven door slightly and pull it out.
Note: Do not close the oven door fully,otherwise the
hinges could become bent and the enamel could be
damaged.
Fitting the appliance door
1. Take hold of the sides of the oven door with both
hands.
2. Slide the hinges into the slots in the oven (a).
Note: The notch at the bottom of the hinges must
engage into the frame of the oven (b).
3. Lower the door.
4. Remove the locking pins.
:Warning – Risk of injury!
If the oven door falls out accidentally or a hinge snaps
shut, do not reach into the hinge. Call the after-sales
service.
:Warning – Risk of injury!
The door may not close properly if the door hinges have
not engaged correctly. This will allow heat to escape
and the parts of the appliance may become very hot. To
prevent this from happening, remove the door again.
Then refit the door as shown in the drawing, making
sure that the groove on the underside of the hinges
engages in the oven frame.
Tr oubl e shoot i ng
--------
Fault messages
If a fault message beginning with “§§ appears on the
display, set the function selector to "Off". If the fault
message does not disappear, please contact our after-
sales service.
DE
ED
Fault Possible cause Notes/remedy
The appliance does not work The plug is not plugged into the mains Connect the appliance to the power supply
Power cut Check whether other kitchen appliances are working
The circuit breaker is faulty Check in the fuse box to make sure that the fuse for
the appliance is OK
The appliance cannot be started The appliance door is not fully closed Close the appliance door
The appliance is not switched off Switch the appliance off and back on again
‚ƒ:‹‹ is flashing on the display
Power failure Reset the clock.
The interior lighting is not working Top/bottom heating gentle mode is active In top/bottom heating gentle mode, the interior light-
ing is not switched on.
The bulb is faulty Replace the bulb.
All food that is cooked in the oven
burns within an extremely short
period of time.
Thermostat faulty. Call the after-sales service.
Door panels are steamed up. This is normal and results from differences in temper-
ature.
Heat the appliance up to 100 °C and then switch it
back off after 5 minutes.
Although the appliance is switched
on, it cannot be operated; the
' symbol is shown on the display
The childproof lock is activated.
Press and hold the c1 touch button until the
' symbol goes out.
Fault message Possible cause Information/remedy
“§§‚
Temperature sensor failed. Call the after-sales service.
“§§ƒ
The temperature in the cooking compartment is too
high.
Call the after-sales service.
en Customer service
20
--------
Replacing the oven light bulb
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
the after-sales service or from specialist retailers.
Please specify the E number and FD number of your
appliance. Do not use any other type of bulb.
:Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
1. Allow the cooking compartment to cool down.
2. Open the appliance door.
3. Place a tea towel in the cooking compartment to
prevent damage.
4. Remove the shelf supports.
5. Remove the glass cover.To do this, open the glass
cover from the front with your hand. Should you
experience difficulties removing the glass cover, use
a spoon to help you.
6. Remove the oven light bulb.
7. Replace the oven light bulb with a bulb of the same
type:
Voltage: 230 V;
Power: 40 W;
Fitting: G9;
Temperature resistance: 300 °C
8. Refit the glass cover for the oven light bulb.
9. Refit the shelf supports.
10. Remove the tea towel.
11. Switch the circuit breaker back on.
12. Check that the oven lighting is working again.
4Customer service
Cu s t o mer ser vi ce
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
bearing these numbers can be found when you open
the appliance door.
On some appliances with a steam-assisted cooking
function, you will find the rating plate behind the control
panel.
To save time, you can make a note of the numbers for
your appliance and the telephone number of the after-
sales service in the space below in case you need
them.
Please note that a visit from an after-sales service
engineer is not free of charge in the event that the
appliance has been misused, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
“§§…
Door locking mechanism incorrectly activated. Call the after-sales service.
“§§†
Fan heating element faulty or not connected. Call the after-sales service.
“§§‡
Motor faulty or not connected. Call the after-sales service.
“§§‰
Cooling fan faulty or not connected. Call the after-sales service.
E no.
FD no.
After-sales service O
GB 0344 892 8999
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
=1U)'(1U
7\SH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Siemens VB558C0S0/04 Kullanma talimatları

Kategori
Fırınlar
Tip
Kullanma talimatları