Yamaha ISX803D El kitabı

INTEGRATED AUDIO SYSTEM

SYSTÈME AUDIO INTÉGRÉ

G

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

i En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place

– away from direct sunlight, heat sources, vibration, dust,

moisture and cold. For proper ventilation, allow the

following minimum clearances.

Top: 15 cm (6 in)

Rear: 2.5 cm (1 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot (or vice versa), and do not locate this

unit in an environment with high humidity (i.e., a room

with a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire, damage to

this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall

onto this unit and/or this unit may be exposed to liquid

dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. Yamaha will not be held responsible for any

damage resulting from use of this unit with a voltage

other than specified.

13 To prevent damage by lightning, keep the power cable

and outdoor antennas disconnected from a wall outlet or

this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any service is

needed. The cabinet should never be opened for any

reasons.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

17 Before moving this unit, press to set the system to off,

and disconnect the AC power plug from the wall outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the system off, then leave this unit

alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such

as sunshine, fire or the like.

– Keep the batteries in a location out of reach of

children. Batteries can be dangerous if a child were to

put in his or her mouth.

– If the batteries grow old, the effective operation range

of the remote control decreases considerably. If this

happens, replace the batteries with two new ones as

soon as possible.

– Do not use old batteries together with new ones.

– Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read the

packaging carefully as these different types of

batteries may have the same shape and color.

– Exhausted batteries may leak. If the batteries have

leaked, dispose of them immediately. Avoid touching

the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

– If you plan not to use the unit for a long period of

time, remove the batteries from the unit. Otherwise,

the batteries will wear out, possibly resulting in a

leakage of battery liquid that may damage the unit.

– Do not throw away batteries with general house

waste. Dispose of them correctly in accordance with

your local regulations.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off by . In this state, this unit is designed

to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

There is a chance that placing this unit too close to a CRT-

based (Braun tube) TV set might impair picture color.

Should this happen, move this unit away from the TV set.

1 En

English Français Deutsch Svenska Italiano Español Nederlands Русский

NAMES OF PARTS AND THEIR FUNCTIONS.........................2

ADJUSTING THE CLOCK.........................................................5

INSTALLING “DTA CONTROLLER” ........................................6

LISTENING TO CD AND USB DEVICES..................................7

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE.....10

LISTENING TO DAB STATIONS (ISX-803D) .........................13

LISTENING TO FM STATIONS...............................................15

LISTENING TO EXTERNAL SOURCES .................................16

USING THE ALARM FUNCTION ............................................17

USING THE SLEEP TIMER .....................................................21

TONE CONTROL (REMOTE CONTROL ONLY) ....................21

ADJUSTING BRIGHTNESS OF FRONT PANEL DISPLAY ...21

TROUBLESHOOTING.............................................................22

NOTES ON DISCS AND USB DEVICES.................................25

SPECIFICATIONS ...................................................................26

• Play back music on external devices such as audio/data CDs and USB devices (USB flash drives), and tune in to the DAB (ISX-803D

only)/FM radio.

•By the Bluetooth technology, you can enjoy clear sound without wired connections. One touch pairing enabled by NFC technology.

• Use your favorite music or set of beeps as an alarm. The music you select is played at a volume of your own choice at the set alarm time,

giving you the best possible start to the day (IntelliAlarm function) (☞ P. 17).

• Store/call up to five of your favorite DAB (ISX-803D only)/FM stations easily.

• The 3-band equalizer (bass, middle, treble) can be set so that music sounds exactly how you want it.

• Two types of clocks (with hour hands) that match the design of the unit can be shown.

 About this manual

• The illustrations of the main unit used in this manual are of the ISX-803D, unless otherwise specified.

• The DAB/DAB+ tuning feature is only available on the ISX-803D.

• If both the unit and remote control buttons can be used to operate a feature, the manual will describe steps using the buttons on the unit.

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

Insert the batteries into the remote control in the correct direction

(+ and –).

Point the remote control at the remote control signal receiver (on

the front panel) and use within the range shown below.

CONTENTS

Features

Supplied accessories

How to use the remote control

Note

y

Power cable Remote control

USB cap

DAB/FM antenna

(for ISX-803D)

Bracket

Pole

Base

Support

Cable clamp

Screw set

Note

Use these items to assemble the

stand. Read the separate

Assembly Guide for information

on how to assemble the stand.

Note

Keep the USB cap out of

reach of children so as to

ensure that it is not

mistakenly swallowed.

Batteries x 2

(AA, R6, UM-3)

Owner’s Manual

(this manual)

Assembly Guide

FM antenna

(for ISX-803)

6 m (20')

2 En

a (Power)

Press to turn on the system or enter standby mode. Time is

displayed on the front panel even when the system is in standby

mode.

y

• Press and hold on the top of the unit for more than 3 seconds to set

the system to Eco Standby mode. No information on the front panel is

displayed in this mode. This can reduce power consumption. To cancel

Eco Standby mode, press again.

• Even in standby mode or Eco Standby mode, the alarm function is

available.

b NFC mark

Allows easy pairing with NFC technology.

c USB port

Connect a USB device (☞ P. 9).

d VOLUME –/+

Adjust the volume.

e SOURCE

Switch the source to be played.

f ALARM

Turns the alarm on/off, and allows various alarm settings to be

adjusted (☞ P. 18, 19).

g SNOOZE/SLEEP

Set the sleep timer or switch the alarm to snooze mode

(☞ P. 19, 21).

h PRESET

Store/call up radio stations, or switch the playback folder

(when playing music on data CDs or USB devices).

i /

Skip the playback track/file, or tune the radio.

Holding the button down while playing a track/file will search

backward/forward the track/file.

j /

Play/pause the track being played.

k

Eject the CD (☞ P. 7, 8).

l Disc slot

Insert a CD (☞ P. 7, 8).

m DAB information display (ISX-803D only)

Display DAB information (☞ P. 13).

n DISPLAY (ISX-803D only)

Switch the DAB information display (☞ P. 14).

NAMES OF PARTS AND THEIR FUNCTIONS

Top panel

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

DISPLAY

nm13245678 jlk9

 Auto Standby

• With the Auto Standby function, the unit behaves as described below when the system is turned on (default setting):

– This unit enters standby mode when playback of CD/USB is paused, when no signal is input from the tuner or a connected device, or when playback

continues at quite a low volume for a certain period of time (about 20 minuets).

– This unit enters standby mode when no operation is performed for more than 8 hours.

• Activating/Deactivating Auto Standby

1 1 Plug in the unit while pressing and holding .

2

2 Keep holding .

Auto Standby status changes, blinking the following indicators:

– When activating Auto Standby: and the , ALARM, and PRESET buttons on the top panel blink for 3 seconds.

– When deactivating Auto Standby: Only on the front display blinks for 3 seconds.

3 En

NAMES OF PARTS AND THEIR FUNCTIONS

English

1 Play/shuffle/repeat indicator

Displays the playback mode (☞ P. 7, 9).

b Remote control signal receiver

c Clock indicator

Shows the clock hour hand (☞ P. 5).

d Source indicator

Shows selected source. (The DAB indicator is only displayed

on the ISX-803D.)

e Bluetooth indicator

Turns on if this unit is connecting via Bluetooth (☞ P. 10, 12).

f Sleep indicator

Turns on if the sleep timer has been set (☞ P. 21).

g Alarm indicator

Turns on if the alarm has been set (☞ P. 17).

The Weekly Alarm indicator ( ) also turns on if Weekly

Alarm has been set.

h Multi-function indicator

Displays various information, including the clock time, track

number being played or FM station.

i Illumination sensor

Detects ambient lighting. Do not cover this sensor.

a ALARM TYPE

Switches the alarm type (☞ P. 18).

b CLOCK

Switches the type of clock display or allows the time to be set

(☞ P. 5).

c DIMMER

Adjusts the brightness of the front panel display (☞ P. 21).

d AUX

Connects an external device.

e DAB/FM antenna terminal (ISX-803D)/

FM antenna terminal (ISX-803)

Connects the supplied DAB/FM antenna or an outdoor antenna.

Notes

• The antenna should be stretched out. If radio reception is poor, change

the height, direction, or placement of the antenna.

• If you use a commercially available outdoor antenna instead of the

supplied DAB/FM antenna, reception may be better.

f Terminal cover

Remove the terminal cover before connecting external devices

to AUX, and/or connecting the DAB/FM antenna to antenna

terminal.

Front panel display

2

56

3

4

8

7

1

9

Rear panel

AUX

75 Ω

DAB

/

FM ANT

AUX

75 Ω

FM ANT

1

6

2 3

5

4

5

ISX-803ISX-803D

AUX

75

Ω

DAB

/

FM ANT

A

UX

75

Ω

DAB

/

FM ANT

Supplied

DAB/FM

antenna

ISX-803D

If you pass the outdoor antenna cable and/or external device cable through the pole of the stand, read the separate Assembly Guide.

NAMES OF PARTS AND THEIR FUNCTIONS

4 En

a Remote control signal transmitter

b (Power)

Press to turn on the system or enter standby mode.

c ALARM

Switches the alarm on/off.

d SNOOZE/SLEEP

Set the sleep timer or switch the alarm to snooze mode

(☞ P. 19, 21).

e Source button

Switch the source to be played.

f (Repeat)/ (Shuffle)

Play music on an audio/data CD or USB device in repeat/

shuffle (☞ P. 7, 9).

g /

Switch the playback folder when playing music on data CDs or

USB devices.

h

Play/pause.

Apply the setting.

i /

Skip the playback track/file.

Holding the button down while playing a track/file will search

backward/forward the track/file.

j

Stop playback.

k +10

Skip 10 tracks/files.

l VOLUME +/–

Adjust the volume.

m MUTE

Mute/resume the sound.

n EQ LOW/MID/HIGH

Adjust the bass, middle or treble sound quality (☞ P. 21).

o PRESET /

Select a preset radio station.

p MEMORY

Store the radio station (☞ P. 15 ).

q TUNING /

Tune the radio.

Remote control

Bluetooth

1

q

p

o

4

6

j

5

3

2

7

9

n

l

k

m

8

5 En

English

1 Move the CLOCK switch on the rear panel to SET.

2 Set the time with / .

3 Move the CLOCK switch on the rear panel to

CLOCK1 or CLOCK2 to end the time setting.

y

• Pressing SNOOZE/SLEEP in step 2 will switch between the 12 and

24 hour clock display.

• The “PM” indicator will be shown only when you select the 12 hour clock

display.

Note

The time settings will be reset if the unit is not powered for more than one

week.

Move the CLOCK switch on the rear panel to switch the clock type.

 Clock display mode 1 (CLOCK 1)

 Clock display mode 2 (CLOCK 2)

ADJUSTING THE CLOCK

Setting the time

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

2

Top panel

SET

Rear panel

Set time (flashing)

Switching the clock type

CLOCK 2

CLOCK 1

Rear panel

Eg: 10:50

Analog clock

hour hand

(hour)

Minute

Eg: 10:50

Minute

Hour

6 En

Installing DTA CONTROLLER application on a mobile device, such as a smartphone or tablet computer, allows you to use a variety of

additional convenient features of this unit.

Features

• Turning on the unit or setting the unit to standby mode

• Adjusting volume

• Setting of the alarm function (IntelliAlarm) (☞ P. 20)

• Playing back songs stored in an iPhone

Note

If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.

INSTALLING “DTA CONTROLLER”

The mobile device needs to be connected with the unit via Bluetooth connection (☞ P. 10).

Google Play

TM

http://itunes.com/app/dtacontroller

https://play.google.com/store/apps/

details?id=com.yamaha.av.

dtacontroller

7 En

English

1 Press SOURCE to set CD as the playback source.

If a CD is already inserted, playback will start.

2 Insert the audio CD into the disc slot with the label

side facing toward the front of the unit.

Playback starts automatically. The track number is shown for a

while when starting playback or skipping tracks.

Use the following buttons to control the unit while playing

back tracks on audio CDs.

Note

CDs cannot be inserted or ejected when the system is in Eco Standby

mode (☞ P. 2).

LISTENING TO CD AND USB DEVICES

The unit will operate as follows when playing back tracks/files on CD/USB devices.

• If the CD/USB device being played back is stopped, the track that was being played back will start playing from the beginning of the

track the next time playback begins.

• If you press on the remote control while playback is stopped, the next time playback begins, the unit will play tracks as follows:

– For audio CD: from the first track of the CD.

– For data CD/USB device: from the first track of the folder that contains the track that was played last.

• This system enters standby mode automatically if 20 minutes have elapsed without any playback and no operation is performed after

CD/USB device playback is stopped.

y

For details on playable discs and files, refer to “NOTES ON DISCS AND USB DEVICES” (☞ P. 25 ).

Listening to an audio CD

Using the remote control

Press CD.

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

12

Top panel

Label side

CD

Track number

Button Function

Top

Panel

/

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

Eject the CD

Remote

control

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

Stop

Repeat playback (☞ P. 9 )

Shuffle playback (☞ P. 9 )

+10 Skip 10 tracks/files

LISTENING TO CD AND USB DEVICES

8 En

1 Press SOURCE to set CD as the playback source.

If a CD is already inserted, playback will start.

2 Insert the data CD into the disc slot with the label

side facing toward the front of the unit.

Playback starts automatically. The folder/file number is shown

for a while when starting playback or skipping tracks.

Use the following buttons to control the unit while playing

back tracks on data CDs.

Listening to a data CD

Using the remote control

Press CD.

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

12

Top panel

Label side

Folder number

File number

Button Function

Top

Panel

/

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

PRESET Change the playback folder

Eject the CD

Remote

control

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

Stop

/ Change the playback folder

Repeat playback (☞ P. 9 )

Shuffle playback (☞ P. 9 )

+10

Skip 10 tracks/files within the

same folder

9 En

LISTENING TO CD AND USB DEVICES

English

1 Press SOURCE and set USB as the playback

source.

If a USB device is already connected, playback will start.

2 Connect a USB device to the USB port.

Playback starts automatically. The folder/file number is shown

for a while

when starting playback or skipping tracks.

Use the following buttons to control the unit while playing

back tracks on USB devices.

y

Stop playback before removing the USB device.

The playback mode can be checked with the play/shuffle/repeat indicator on the front panel display.

y

If the selected source contains folders, each folder will be played in repeat/

shuffle mode.

 Repeat playback

Press (Repeat) on the remote control to select a playback

mode from the following.

: 1 track

:

All tracks within the folder (data CD/USB device only)

:All tracks

No display: Repeat mode off

 Shuffle playback

Press (Shuffle) on the remote control to select a playback

mode from the following.

:

All tracks within the folder (data CD/USB device only)

:All tracks

No display: Shuffle mode off

Listening to a USB device

Using the remote control

Press USB.

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

21

Top panel

Folder number

File number

Button Function

Top

Panel

/

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

PRESET Change the playback folder

Remote

control

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

Stop

/ Change the playback folder

Repeat playback (☞ P. 9 )

Shuffle playback (☞ P. 9 )

+10

Skip 10 tracks/files within the

same folder

Repeat/shuffle playback

Repeat

Shuffle

Remote control

10 En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (smartphone, digital audio

player, etc.). Please also refer to the owner’s manual of your Bluetooth device.

Pairing is an operation that registers the communicating device (hereafter called “the connecting device”) with this unit. You’ll need to

perform the pairing operation the first time you use your Bluetooth device with this unit, or if the pairing settings have been deleted. Once

pairing has been completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing is not

successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” (☞ P. 23).

y

• This unit can be paired with up to eight connecting devices. When pairing with the ninth device has succeeded, pairing data for the device with the oldest

connection date will be deleted.

• If this unit is connected via Bluetooth to another device, hold down the SOURCE button on this unit or Bluetooth on the remote control to disconnect the

Bluetooth connection before you perform the pairing operation.

 If using an iPod touch/iPhone/iPad

1 Press the SOURCE button to switch the playback

source to Bluetooth.

2 On your iPod touch/iPhone/iPad, turn [Settings]

[Bluetooth] on.

The Bluetooth connection list will appear in [Devices].

(This procedure or display may differ depending on the type of

your iPod touch/iPhone/iPad.)

3 From the Bluetooth connection list of the connecting

device, choose this unit (ISX-803 Yamaha/ISX-803D

Yamaha).

When pairing has been completed, your iPod touch/iPhone/

iPad will indicate “Connected”.

The Bluetooth indicator on the front panel display of this unit

will light.

 If using other than an iPod touch/iPhone/iPad

1 Press the SOURCE button to switch the playback

source to Bluetooth.

2 Perform Bluetooth pairing on the connecting device.

For details refer to the owner’s manual of the connecting

device.

3 From the Bluetooth connection list of the connecting

device, choose this unit (ISX-803 Yamaha/ISX-803D

Yamaha).

When pairing has been completed, the B luetooth indicator on

the front panel display of this unit will light for about 1

second.

y

If you are asked to enter a password, enter the numerals “0000”.

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Pairing this unit with your Bluetooth device

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1

Top panel

Bluetooth indicator

Using the remote control

Press Bluetooth.

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1

Top panel

Bluetooth indicator

Using the remote control

Press Bluetooth.

11 En

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

English

 Easy pairing

For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing operation just by holding the

smartphone over the NFC mark (you need to turn the system on and turn on the NFC function of the smartphone beforehand).

1 Press the SOURCE button to switch the playback

source to Bluetooth.

2 Connect this unit and your connecting device via

Bluetooth.

3

Play back music from your

Bluetooth

device.

Note

Take care that the volume setting of this unit is not too high. We

recommend that you adjust the volume on the connecting device.

y

• If you connect via Bluetooth from your connecting device and play

back music while the system is in standby mode, the system will

automatically turn on.

• If you disconnect the Bluetooth connection from your connecting

device while the playback source is set to Bluetooth, the system will

automatically enter standby mode.

• If Bluetooth is selected as the playback source, the system will

automatically enter standby mode when 20 minutes have elapsed

without any Bluetooth connection nor any operation performed.

1 Press to turn the system on.

2 Hold the smartphone over the NFC mark.

3 Perform the pairing operation at the smartphone

(for details, please read the owner’s manual of the

smartphone).

This unit is indicated as “ISX-803 Yamaha”/“ISX-803D

Yamaha” on the smartphone.

y

• If you are prompted for a passkey, enter the numerals “0000”.

• If the connection fails, move the smartphone slowly on the NFC

mark.

• If the smartphone is equipped with a case, remove the case.

NFC

mark

Listening to a Bluetooth device

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1

Top panel

Using the remote control

Press Bluetooth.

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

12 En

Once pairing has been completed, connecting a Bluetooth will be easy the next time.

 Connecting from this unit

1 Press the SOURCE button to switch the playback

source to Bluetooth.

The Bluetooth indicator will blink on the front panel display;

this unit will search for the connecting device that was most

recently connected via Bluet ooth, and will then establish a

connection (You must first turn on the Bluetooth setting of the

connecting device).

When the Bluetooth connection has been established, the

Bluetooth indicator will light.

Note

Yamaha does not guarantee all connections between this unit and

Bluetooth device.

 Connecting from the connecting device

1 In the Bluetooth settings of the connecting device, turn Bluetooth on.

2 From the Bluetooth connection list of the connecting device, choose this unit (ISX-803 Yamaha/ISX-803D

Yamaha).

The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this unit will light.

 Connecting with the NFC function

When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a Bluetooth connection.

Note

Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby mode. Turn the system on.

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth connection will be disconnected.

• Hold down the SOURCE button on this unit or Bluetooth on the remote control.

• Set the system to standby mode.

• Turn off the Bluetooth setting of the connecting device.

• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.

Connecting an already-paired device via Bluetooth

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1

Top panel

Bluetooth indicator

Using the remote control

Press Bluetooth.

Disconnecting a Bluetooth connection

13 En

English

DAB (Digital Audio Broadcasting) and DAB+ use digital signals for clearer sound and more stable reception compared to analog signals.

DAB+ is based on the original DAB standard but uses a more efficient audio codec.

DAB and DAB+ are broadcast in blocks of data called “ensembles” containing up to several radio stations that are simultaneously broadcast.

DAB and DAB+ can also include an extensive amount of text information, enabling you to select a station by name.

Other information, such as the ensemble name or the status of the digital signal, can be displayed on the DAB information display.

“DAB” described in this manual may also refer to “DAB+”.

Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial scan is performed

automatically.

1

Press

SOURCE

and set DAB as the playback source.

The initial scan starts. During the scan, the degree of progress

is displayed on the DAB information display.

Scan is completed.

“Completed” and the number of receivable DAB stations

appear on the DAB information display.

Note

• To perform the initial scan manually, press and hold PRESET for

more than 4 seconds and then press PRESET when the scan starting

screen is displayed.

• If the initial scan is performed, stored DAB station information and

preset DAB stations are cleared.

1

Press

SOURCE

and set DAB as the playback source.

2 Press / to tune the DAB station.

While receiving DAB, switch on the DAB information display.

When the unit does not receive a DAB signal, “Off Air” is

displayed instead of the DAB station name.

LISTENING TO DAB STATIONS (ISX-803D)

Preparing for DAB reception

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1 1

Top panel

Using the remote control

Press RADIO to switch between DAB/FM.

Tuning DAB stations

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

12

Top panel

Using the remote control

Press TUNING /

1

2

4

3

a Signal strength indicator:

Shows current signal strength.

b Secondary indicator:

Some stations have sub (secondary) stations. If a

secondary station is playing, the secondary indicator is

displayed.

c DAB station name

d DAB station Information (☞ P. 14)

LISTENING TO DAB STATIONS (ISX-803D)

14 En

1 Select DAB information by pressing DISPLAY

repeatedly.

Information is displayed in the order shown below.

Use the preset function to store your favorite 5 stations.

1 Press / to tune into your favorite DAB station.

2 Press and hold down PRESET.

3 Press PRESET and select the preset number to

store the DAB station.

4 Press and hold down PRESET to store the preset

station.

This stores the DAB station.

1 Press SOURCE and set DAB as the playback

source.

2 Press PRESET repeatedly to select the preset DAB

station.

Switching DAB station information

SET BEEP

SOURCE

+

BEEP

SOURCE

CLOCK

ALARM TYPE

2

1

LABEL SIDE

PRESET

DISPLAY

N

OOZE

SLEEP

1

Top panel

Text information

¨ Ensemble name

( is displayed before the ensemble name.)

¨ Status 1 (channel label and frequency)

¨ Status 2 (DAB or DAB+ and signal quality)

¨ Back to the top.

Storing DAB stations (preset)

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

234 1

Top panel

Using the remote control

Press and hold down MEMORY.

Using the remote control

Press PRESET /.

Using the remote control

Press MEMORY.

DAB

Preset

number

Selecting preset DAB stations

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1 2

Top panel

Using the remote control

Press PRESET /.

15 En

English

Note

If you tune to an FM station manually, the sound will be in monaural.

1 Press SOURCE and set FM as the playback source.

2 Press / to tune the FM station.

Use the preset function to store your favorite 5 stations.

1 Press / to tune into your favorite FM station.

2 Press and hold down PRESET.

3 Press PRESET and select the preset number to

store the FM station.

4 Press and hold down PRESET to store the preset

station.

This stores the FM station.

LISTENING TO FM STATIONS

Selecting the FM station

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

12

Top panel

Using the remote control

Press RADIO.

Tuning type Operation

Top

panel

Automatic

tuning

Press and hold down

or .

Manual

tuning

Press or repeatedly.

Remote

control

Automatic

tuning

Press and hold down

TUNING or .

Manual

tuning

Press TUNING or

repeatedly.

FM

Reception

frequency

Storing FM stations (preset)

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

234 1

Top panel

Using the remote control

Press and hold down MEMORY.

Using the remote control

Press PRESET /.

Using the remote control

Press MEMORY.

FM

Preset

number

LISTENING TO EXTERNAL SOURCES

16 En

1 Press SOURCE and set FM as the playback source.

2 Press PRESET repeatedly to select the preset FM

station.

Set the system to standby mode before connecting audio cables.

Remove the terminal cover before connecting external devices.

1 Connect external audio device to AUX on the rear

panel using a commercially available 3.5 mm (1/8 in)

stereo mini plug cable.

Note

Turn down the volume of the unit and your external audio device before

connection.

2 Press to turn the system on.

3 Press SOURCE and set AUX as the playback

source.

4 Start playback on the connected external audio

device.

Selecting a preset FM station

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

1 2

Top panel

Using the remote control

Press PRESET /.

LISTENING TO EXTERNAL SOURCES

AUTO SET

DIMMER

C

L

2

1

VOLUME

USB LA

B

SOURCE ALARM SNOO

Z

2

3

Top panel

Using the remote control

Press AUX.

AUX

75 Ω

FM ANT

AUX

75 Ω

DAB

/

FM ANT

AUX

ISX-803D

ISX-803

17 En

English

The unit includes an alarm function (IntelliAlarm) that plays back music sources or set of beeps (built-in alarm) at the set time in a variety of

different methods. The alarm function has following features.

 3 types of alarms

Select from 3 alarm types, combining music and beep sounds.

 Various music sources

Audio CD, data CD, USB device and radio can be selected. The following can also be selected depending on the audio source:

 Snooze

The snooze function can be enabled to replay the alarm after 5 minutes.

USING THE ALARM FUNCTION

SOURCE + BEEP

The selected audio source and beep sound are played at the set time. This mode is recommended for

the best possible start to the day.

3 minutes before the set time: the source music begins to fade in and the volume gradually increases

as the alarm time approaches.

Alarm time: a beeping sound also begins playing.

SOURCE

The selected audio source is played at the set time. The volume fades in gradually and increases to

the set volume.

BEEP Only beep sound is played back at the set time.

Source Playback method Function

Audio CD

Selected track The selected track is played repeatedly.

Resume The track you listened to last time is played back.

Data CD/USB

Folder The selected folder is played repeatedly.

Resume The track you listened to last time is played back.

Radio

Preset station The selected preset radio station is played.

Resume The radio station you listened to last time is played back.

USING THE ALARM FUNCTION

18 En

Note

The alarm setting will be erased if the system enters standby mode without

properly completing it.

1 Press and hold ALARM.

The alarm indicator ( ) and set alarm time will flash

.

2 Press / to set the alarm time.

3 Select the alarm type with the ALARM TYPE

switch on the rear panel.

For details on alarm types, refer to P. 17.

4 (when alarm types other than BEEP are selected)

Press SOURCE to select music source.

Sources other than AUX and Bluetooth can be selected.

Notes

• If CD/USB has been selected, connect/insert the audio source (audio/

data CD, USB device) to the unit.

• If source cannot be played back at the time set for the alarm (eg. CD

is not inserted), the beep sound is played back.

5 (when alarm types other than BEEP are selected)

Specify the track, folder or radio station to be

played.

Press PRESET to select the track (audio CD), folder (data

CD/USB device) or radio station to be played.

y

When “0” is set, the playback resumes from the track/radio station you

listened to last time (resume).

6 Set the alarm volume by pressing VOLUME –/+

.

7 Press ALARM to complete setting the alarm.

The alarm will be set, and the alarm indicator ( ) will

light up.

Set the alarm time and alarm type

Using the remote control

Press / .

AUTO SET BEEP

SOURCE

+

BEEP

SOURCE

DIMMER

CLOCK

ALARM TYPE

2

1

2

1

VOLUME

USB LABEL SIDE

SOURCE PRESETALARM SNOOZE

SLEEP

17

2465

Top panel

Alarm indicator

Alarm time

BEEP

SOURCE+

BEEP

SOURCE

Rear panel

Using the remote control

Press the USB, CD, or RADIO button to select the

music source.

Using the remote control

Press PRESET /.

Alarm volume

Sayfa yükleniyor...

Yamaha ISX803D El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Yamaha ISX803D El kitabı

diğer dillerde

İlgili makaleler

Diğer belgeler