Makita VC006GM Kullanım kılavuzu

Marka: Makita

Model: VC006GM

Tip: Kullanım kılavuzu

VC006GM

EN Cordless Vacuum Cleaner INSTRUCTION MANUAL 10

FR Aspirateur Sans Fil MANUEL D’INSTRUCTIONS 25

DE Akku-Staubsauger BETRIEBSANLEITUNG 41

IT Aspirapolvere a batteria ISTRUZIONI PER L’USO 57

NL Accustofzuiger GEBRUIKSAANWIJZING 74

ES Aspiradora Inalámbrica MANUAL DE

INSTRUCCIONES 90

PT Aspirador de Pó a Bateria MANUAL DE INSTRUÇÕES 106

DA Akku støvsuger BRUGSANVISNING 122

EL 

  137

TR Akülü Süpürge KULLANMA KILAVUZU 154

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.17

Fig.18

Fig.19

Fig.20

Fig.21

Fig.22

Fig.23

315mm

Fig.24

Fig.25

Fig.26

Fig.27

Fig.28

Fig.29

Fig.30

Fig.31

Fig.32

Fig.33

Fig.34

Fig.35

Fig.36

Fig.37

Fig.38

Fig.39

Fig.40

Fig.41

Fig.42

Fig.43

Fig.44

Fig.45

Fig.46

Fig.47

Fig.48

Fig.49

Fig.50

10 ENGLISH

ENGLISH (Original instructions)

WARNING

• This machine is not intended for use by persons including children with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge.

• Children should be supervised to ensure that they do not play with the cleaner.

• See the chapter “SPECIFICATIONS” for the type reference of the battery.

• See the section “Installing or removing battery cartridge” for how to remove or install the battery.

• When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local

regulations relating to disposal of battery.

• If the tool is not used for a long period of time, the battery must be removed from the tool.

• Do not short the battery cartridge.

• See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance.

SPECIFICATIONS

Model: VC006GM

Maximum air volume at the end

of hose

With BL4050F, ø28 mm x3.5 m hose

2.0 m3/min

With BL4050F, ø38 mm x 2.5 m hose

3.7 m3/min

Maximum air volume at turbine (with BL4050F) 4.9 m3/min

Vacuum (with BL4050F) 18 kPa

Recoverable capacity Dust 40 L

Water 30 L

Dimensions (L x W x H) 586 mm x 385 mm x 598 mm

Rated voltage D.C. 72 V - 80 V max

Net weight 18.4 - 20.8 kg

Protection degree IPX4

 

without notice.

 

• The weight does not include accessories but battery cartridge(s). The lightest and heaviest combinations

weight of the appliance and battery cartridge(s) are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020 / BL4025 / BL4040* / BL4050F* / BL4080F*

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges



11 ENGLISH

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Take particular care and attention.

Warning! The cleaner may contain haz-

ardous dust.

Never stand on the cleaner.

Max

20kg

44lbs

Never put anything heavier than 20 kg (44

lbs) on the cleaner.

Dust class M (medium): for separating dust

with a limit value of occupational exposure

not less than 0.1 mg/m3. The cleaners are

capable of picking up dust class L and M.

Follow your country's regulations relating to

dusts and to occupational health and safety.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and on accumulators and batteries

and waste accumulators and batteries,

as well as their adaptation to national law,

waste electrical equipment, batteries and

accumulators should be stored separately

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The appliance is intended for collecting both wet and

dry dust. The appliance is suitable for commercial use,

for example in hotels, schools, hospitals, factories,



Noise

The typical A-weighted noise level determined accord-

ing to EN60335-2-69:

Sound pressure level (LpA) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB (A)

The noise level under working may exceed 80 dB (A).

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual



value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched



trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60335-2-69:

Vibration emission (ah,M) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during



declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched



trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety

warnings

WARNING: IMPORTANT! READ CAREFULLY

all safety warnings and all instructions BEFORE

USE. Failure to follow the warnings and instructions



1. Before use, make sure that this cleaner must

be used by people who have been adequately

instructed on the use of this cleaner.

12 ENGLISH

2. Before use, operators shall be provided with

information, instruction and training for the

use of the machine and the substances for

which it is to be used, including the safe

method of removal and disposal of the mate-

rial collected.



4. Clean the water level limiting device regularly

and examine it for signs of damage.

5. 

installed before use. Do not use the cleaner







6. AVOID UNINTENTIONAL STARTING. Be sure

switch is OFF when installing battery(ies).

7. -



hot metal chips, and sharp materials such as

razors, needles, broken glass or the like.

8. NEVER USE THE CLEANER IN THE VICINITY

OF GASOLINE, GAS, PAINT, ADHESIVES OR

OTHER HIGHLY EXPLOSIVE SUBSTANCES.

The switch emits sparks when turned ON

and OFF. And so does the motor commutator

during operation. A dangerous explosion may

result.

9. Never vacuum up toxic, carcinogenic, com-

bustible or other hazardous materials such

as asbestos, arsenic, barium, beryllium,

lead, pesticides, or other health endangering

materials.

10. 

surface to prevent it from falling or moving

unintentionally.

11. Never use the cleaner outdoors in the rain.

12. For Finland, this machine is not to be used

outdoors at low temperature.

13. Do not use close to heat sources (stoves, etc.).

14. If the exhaust air is returned to the room, it

is necessary to provide for an adequate air

change rate in the room. Reference to National

regulations is necessary.

15. Do not block suction inlet/outlet/cooling vents.

These vents permit cooling of the motor.

Blockage should be carefully avoided other-

wise the motor will burn out due to a lack of

ventilation.

16. Keep proper footing and balance at all times.

17. Do not fold, tug or step on the hose.

18. Stop the cleaner immediately if you notice

poor performance or anything abnormal

during operation.

19. REMOVE THE BATTERY(IES). When not in

use, before servicing, and when changing

accessories.

20. Clean and service the cleaner immediately

after each use to keep it in tiptop operating

condition.

21. MAINTAIN THE CLEANER WITH CARE. Keep

the cleaner clean for better and safer per-

formance. Follow instructions for changing

accessories. Keep handles dry, clean, and free

from oil and grease.

22. CHECK DAMAGED PARTS. Before further use

of the cleaner, a guard or other part that is

damaged should be carefully checked to deter-

mine that it will operate properly and perform

its intended function. Check for alignment of

moving parts, binding of moving parts, break-

age of parts, mounting, and any other condi-



other part that is damaged should be properly

repaired or replaced by an authorized service

center unless otherwise indicated elsewhere

in this instruction manual. Have defective

switches replaced by authorized service cen-

ter. Don’t use the cleaner if switch does not



23. For user servicing, the machine shall be dis-

mantled, cleaned and serviced, as far as is

reasonably practicable, without causing risk to



24. The machine should be technically inspected

by the manufacturer, or an instructed person,

at least annually, consisting of, for example,



of the machine and proper function of the

control mechanism.

25. When carrying out service or repair opera-

tions, all contaminated items which cannot be

satisfactorily cleaned are to be disposed of;

such items shall be disposed of in impervious

bags in accordance with any current regula-

tion for the disposal of such waste.

26. REPLACEMENT PARTS. When servicing, use

only identical replacement parts.

27.

When not in use, always store the cleaner indoors.

28. 

container shall be dried before storage.

29. Be kind to your cleaner. Rough handling can

cause breakage of even the most sturdily built

cleaner.

30. Do not attempt to clean the exterior or interior

with benzine, thinner or cleaning chemicals.

Cracks and discoloration may be caused.

31. Do not use cleaner in an enclosed space where









32. Do not operate the cleaner or any tool while



33. As a basic rule of safety, use safety goggles or

safety glasses with side shields.

34. Use a dust mask in dusty work conditions.

35. This machine is not intended for use by per-

sons including children with reduced physical,

sensory or mental capabilities, or lack of expe-

rience and knowledge.

36. Children should be supervised to ensure that

they do not play with the cleaner.

37. Never handle battery(ies) and cleaner with wet

hands.

38. Use extreme caution when cleaning on stairs.

39. Do not use the cleaner as a stool or work

bench. The machine may fall down and may

result in personal injury.

13 ENGLISH

Battery tool use and care

1. 

the manufacturer. A charger that is suitable for



when used with another battery pack.

2. -

nated battery packs. Use of any other battery



3. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery termi-



Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

-

tacts eyes, additionally seek medical help. Liquid



Do not use a battery pack or tool that is damaged or

-



6. 

excessive temperature.-

perature above 130 °C may cause explosion.

7. Follow all charging instructions and do not

charge the battery pack or tool outside the

-

tions. Charging improperly or at temperatures





SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery char-

ger, (2) battery, and (3) product using battery.

Do not disassemble or tamper with the battery car-

tridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current



breakdown.

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn



8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge. Such conduct may result in a



9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.



battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

 Installing the batteries to

-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge.

burst and malfunction of the tool or battery car-



17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near a high-voltage elec-

trical power lines. It may result in a malfunction

or breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting



also void the Makita warranty for the Makita tool and

charger.

14 ENGLISH

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

Charge the battery cartridge with room tempera-

ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot

battery cartridge cool down before charging it.

4. When not using the battery cartridge, remove

it from the tool or the charger.

5. Charge the battery cartridge if you do not use

it for a long period (more than six months).

Important safety instructions for

wireless unit

1. Never open the lid of the slot by yourself once

installing the wireless unit.

2. Do not disassemble or tamper with the wire-

less unit.

3. Keep the wireless unit away from young chil-

dren. If accidentally swallowed, seek medical

attention immediately.

4. Use the wireless unit only with Makita tools.

5. Do not expose the wireless unit to rain or wet

conditions.

6. Do not use the wireless unit in places where

the temperature exceeds 50 °C (122 °F).

7. Do not operate the wireless unit in places

where medical instruments, such as heart

pace makers are nearby.

Do not operate the wireless unit in places where

automated devices are nearby. If operated, auto-

mated devices may develop malfunction or error.

9. Do not operate the wireless unit in places

under high temperature or places where

static electricity or electrical noise could be

generated.

10.

The wireless unit can produce electromagnetic



11. The wireless unit is an accurate instrument. Be

careful not to drop or strike the wireless unit.

12. Avoid touching the terminal of the wireless

unit with bare hands or metallic materials.

13. Always remove the battery on the product

when installing the wireless unit into it.

14. When opening the lid of the slot, avoid the

place where dust and water may come into the

slot. Always keep the inlet of the slot clean.

15. Always insert the wireless unit in the correct

direction.

16. Do not press the wireless activation button

on the wireless unit too hard and/or press the

button with an object with a sharp edge.

17.

Always close the lid of the slot when operating.

18. Do not remove the wireless unit from the slot

while the power is being supplied to the tool.

Doing so may cause a malfunction of the wireless

unit.

19. Do not remove the sticker on the wireless unit.

20. Do not put any sticker on the wireless unit.

21. Do not leave the wireless unit in a place where

static electricity or electrical noise could be

generated.

22. Do not leave the wireless unit in a place sub-

ject to high heat, such as a car sitting in the

sun.

23. Do not leave the wireless unit in a dusty or

powdery place or in a place corrosive gas

could be generated.

24. Sudden change of the temperature may bedew

the wireless unit. Do not use the wireless unit

until the dew is completely dried.

25. When cleaning the wireless unit, gently wipe

with a dry soft cloth. Do not use benzine, thin-

ner, conductive grease or the like.

26. When storing the wireless unit, keep it in the

supplied case or a static-free container.

27. Do not insert any devices other than Makita

wireless unit into the slot on the tool.

28. Do not use the tool with the lid of the slot dam-

aged. Water, dust, and dirt come into the slot may

cause malfunction.

29. Do not pull and/or twist the lid of the slot more

than necessary.

from the tool.

30. Replace the lid of the slot if it is lost or

damaged.

SAVE THESE INSTRUCTIONS.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the appliance



removed before adjusting or checking function on

the appliance.

Installing or removing battery

cartridge

CAUTION: 

installing or removing of the battery cartridge.

CAUTION: Hold the cleaner and the battery

-

tery cartridge. Failure to hold the cleaner and the



your hands and result in damage to the cleaner and



CAUTION: -

gers when opening or closing the battery cover.





then open the battery cover. After that, insert the battery

cartridge.

Fig.1: 1. Lock 2. Battery cover

15 ENGLISH

Align the tongue on the battery cartridge with the groove

in the housing and slip it into place. Insert it all the way

until it locks in place with a little click. Then lock the

battery cover.

Fig.2: 1. Battery cartridge 2. Button

To remove the battery cartridge, slide it from the tool

while sliding the button in front of the cartridge.

CAUTION: Always install the battery cartridge

fully. If not, it may accidentally fall out of the cleaner,



CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

NOTE: The cleaner does not work with only one

battery cartridge.

Indicating the remaining battery

capacity

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for a few seconds.

Fig.3: 1. Indicator lamps 2. Check button

Indicator lamps Remaining

capacity

Lighted  Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the



from the actual capacity.

NOTE:

the battery protection system works.

Battery indicators on control panel

The remaining battery capacity can be read on the

control panel at any time. Press the check button, and

the left and right indicators will show the battery charge

levels correspondingly.

Fig.4: 1. Left battery indicator 2. Right battery indi-

cator 3. Check button

Fig.5

Battery indicator status Remaining

battery

capacity

On  Blinking

50% to 100%

20% to 50%

0% to 20%

Charge the

battery

Battery not

inserted

NOTE: Battery indicator works while two batteries are

inserted.

NOTE: The battery indicators will also be activated

when the cleaner starts functioning.

Appliance / battery protection system

The appliance is equipped with an appliance/battery protec-



motor to extend appliance and battery life. The appliance

will automatically stop during operation if the appliance or

battery is placed under one of the following conditions:

Overload protection

When the appliance/battery is operated in a manner

that causes it to draw an abnormally high current, the

appliance automatically stops. In this situation, turn the



appliance to become overloaded. Then turn the appli-

ance on to restart.

Overheat protection

On Blinking

When the appliance is overheated, the appliance stops

automatically, and both left and right battery indicators

blink. In this situation, let the appliance cool down and



again.

16 ENGLISH

On Blinking

When the battery is overheated, the appliance stops

automatically, and one of the indicators for overheated

battery blinks. In this situation, let the battery cool down

before turning the appliance on again.

Overdischarge protection

When the battery capacity becomes low, the appliance

stops automatically. If the appliance does not run along

with the switch operation, remove the batteries from the

appliance and recharge them.

Protections against other causes

Protection system is also designed for other causes that could dam-

age the appliance and allows the appliance to stop automatically.

Take all the following steps to clear the causes, when the appliance

has been brought to a temporary halt or stop in operation.



2. Charge the battery(ies) or replace it/them with

recharged battery(ies).

3. Let the appliance and battery(ies) cool down.

If no improvement can be found by restoring protection

system, then contact your local Makita Service Center.

Switch action

Turning cleaner on

1. Turn the stand-by switch in the "I" (ON) or "AUTO"

(ON) position to have the cleaner ready in

stand-by mode.

2. Press the power button.

To switch back to stand-by mode, press the power

button again.



Perform one of the following steps.

• Press the power button to set the cleaner back in

stand-by mode.

• Turn the stand-by switch in the "O" (OFF) position.

Adjusting suction power



 

reduce the suction power.

 

to increase the suction power.

Hose diameter selection

Turn the hose diameter selection dial to the hose's

diameter that you are going to use.

NOTE: Do not turn the dial to a gap between the

numbers. Always turn the dial according to the hose

diameter.

Fig.6: 1. Stand-by switch 2.-

ing knob 3. Hose diameter selection dial

4. Power button

NOTICE: Always set the stand-by switch to the "O"

side when not using the cleaner for long time. The

cleaner consumes power during stand-by state.

Warning beep

There are two types of beeping sound. One is short

beeps, and the other is continuous beeps.

 

cleaner emits short warning beeps for safety rea-

sons. When it sounds, check the hose diameter

selection dial or if the suction force is not too low.

If the beeps keep sounding, perform maintenance

or ask your local service center.

 

emits continuous warning beeps and stops

automatically.



empty the tank.

Auto-suction stop during wet

suction operation

WARNING: Do not pick up foam or soapy

liquid. It can cause foam to come out of air exit.

Continuous use under such conditions may cause an

electric shock and breakage of the cleaner.

The cleaner has a mechanism that prevents water from

immersing into the motor when picking up more than a

certain amount of water.

When the tank is full with liquid, the cleaner emits con-

tinuous warning beeps and stops automatically. After the



Filter cleaning system





-



If the appliance sucks up the large quantity of dust all at

once, suction force may decrease. In that case, manual



1. 

2. Set the suction power to maximum, and then close

the suction hose opening with your palm.

3. Switch on the appliance and operate for approx-

imately 15 seconds with the suction hose opening

closed.

Fig.7: 1. Suction hose opening

NOTE:

cleaning system is being activated but it is not

malfunctioned.

Water drain



and open the water drain cap to empty the tank.

Fig.8: 1. Water drain cap

Cap

The cap is supplied with the appliance. Mounting the

cap on the hose connecting port prevents the vacu-

umed dust from getting out from the cleaner.

Fig.9: 1. Cap

17 ENGLISH

Locking and unlocking casters

Front casters can be locked with stoppers to help the

cleaner stand still.

Lower the stopper lever by hand to lock the caster, and

raise it up to release.

Fig.10: 1. Caster 2. Stopper lever 3. Unlocked

position 4. Locked position

NOTE: When moving the cleaner, make sure that the

caster is unlocked. Moving the cleaner with the caster

in a locked position may cause damage to the caster.

Carriage handle

CAUTION: Lift and carry the appliance with

due care. Failing to do so may result in personal



When carrying the cleaner, carry it by holding the han-

dle on the head unit. The handle is retractable on the

head unit when not in use.

Fig.11





Fig.12

Fig.13

ASSEMBLY

WARNING: This unit may contain hazardous



or maintenance, always use a P2-respirator.

CAUTION: Always be sure that the appliance



removed before carrying out any work on the

appliance.



WARNING: Always use a P2-respirator.

WARNING: 

 Failure to





WARNING: When using the appliance as dust



NOTICE: Never pick up water or other liquids or

 Picking up such



1. Release the locking hooks and lift the head unit up



Fig.14: 1. Locking hook

2. 

3. 

the tank.

4. 

so that it is positioned at the end beyond the detent

protrusion.

Fig.15: 1. Filter bag 2. Cardboard opening 3. Filter

bag holder 4. Dust intake 5. Edge



bag's mouth so that the mouth is closed by a paper.

Installing polyethylene bag

Optional accessory

Lay a polyethylene bag over the tank, and slip one side

of the top edge of the bag at its open end in between

the holder plate and the front wall of the tank.

Then, spread the other top edges of the bag outwards

over the top rims of the tank.



Fig.16: 1. Holder plate 2. Front wall of tank

3. Polyethylene bag

NOTE: A polyethylene bag available on the market

can be used. The thickness is over 0.04 mm and the

perimeter is over 2,000 mm one is recommended.

NOTE: Too much dust will tear the polyethylene bag



bag may be a burden on a human body.

Emptying tank with

polyethylene bag

WARNING: Always make sure that the cleaner



removed before emptying the tank. Failure to do

so may cause an electric shock and serious personal



NOTICE: Empty the tank at least once a day

although this depends on picked-up dust volume

in the tank. Or, the suction force will weaken and the

motor may be broken.

NOTICE: Do not grab the locking hooks when

emptying the tank. Grabbing the locking hooks may

cause them to break.

1. Release the locking hooks and lift the head unit up



2. Remove the polyethylene bag out of the tank,

closing the opening of the bag by hand.

Fig.17: 1. Polyethylene bag 2. Tank

NOTE: Take the polyethylene bag out of the tank

carefully to avoid it from being scratched and torn by

the edges inside the tank.

NOTE: Empty the polyethylene bag before it

becomes full. Too much dust in the tank may cause

the polyethylene bag to be torn.

18 ENGLISH

Installing hose

NOTICE: Never force the hose for bending or

stamp it. Never move the cleaner by pulling the

hose. Forcing, stamping and pulling the hose may

cause a breakage or deformation of the hose.

NOTICE: When picking up large wastes such as

planer carvings, concrete dusts or similar other

than small wastes, use the 38 mm inner diameter

hose (optional accessory). Using the 28 mm inner

diameter hose (optional accessory) may cause a



NOTICE: Always put the cap on the mounting

port whenever you remove the hose from the

cleaner.

Connection to cleaner

Remove the cap from the mounting port. The cap can

be stored at the rear of the cleaner while the hose is

connected to the cleaner.

Fig.18: 1. Cap

Insert the hose end to the dust intake (hose inlet) of the

cleaner, then turn it clockwise until it locks in place.

Fig.19: 1. Hose 2. Dust intake (hose inlet)

Connections with your work tools



By connecting the vacuum cleaner to any available

work tools compatible with the cleaner, it works as a

dust extractor for your power tools.

-

sories) as most suitable for your tool model. Place the



cleaner hose and a dust extraction port of your tool.

Fig.20: 1.2. Cleaner hose

3. Power tool 4. Vacuum cleaner

Installing or removing cleaner

attachments

CAUTION: After installing an attachment,

check if it is securely installed. If the attachment





Attachments without lock function

Optional accessory

Insert an attachment into the suction inlet of the cleaner

by pushing and hand screwing it in place.

Hand twist and pull the attachment apart from the suc-

tion inlet after use.

Fig.21

Installing MAKPAC

Optional accessory

CAUTION: Do not stand on or sit on the top of

the appliance. It may fall down because of instability.

CAUTION: Be careful with the operation when

installing MAKPAC. Failing to do so may result in



CAUTION: When MAKPAC is installed on the

appliance, do not lift the appliance with the han-

dle of MAKPAC.

CAUTION: When moving the appliance which

is installed MAKPAC, do not push MAKPAC but

the body of appliance. Pushing MAKPAC may break

the latches and drop MAKPAC, which may result in



Connectable and stackable MAKPAC storage cases

can be installed on top of the cleaner. The cases

are available in many sizes and styles to suit your

preferences.

1. Unfold the latches on top surface of the cleaner.

Fig.22: 1. Latch

2. Mount the MAKPAC cases on top of the cleaner



Fig.23: 1. Latch 2. MAKPAC

Maximum height and weight of installing MAKPAC are

315 mm and 20 kg respectively.

Fig.24

OPERATION

WARNING: Always use a P2-respirator.

CAUTION: If foam or liquid escapes from the



in this condition may cause an electric shock and

breakage of the cleaner.

WIRELESS ACTIVATION

FUNCTION

Optional accessory

What you can do with the wireless

activation function

The wireless activation function enables clean and

comfortable operation. By connecting a supported tool

to the cleaner, you can run the cleaner automatically

along with the switch operation of the tool.

Fig.25

19 ENGLISH

NOTICE: Be sure to refer to the instruction man-

ual of the tool when using the cleaner with wire-

less activation function.

NOTICE: Do not disassemble or tamper with the

wireless unit.

NOTICE: To prevent dust coming into the slot

of the wireless unit, always close the lid securely

during operation and storage.

NOTICE: Do not press the wireless activation

button too hard and/or press the button with an

object with a sharp edge.

NOTE: Wireless activation needs Makita tools

equipped with the wireless unit.

NOTE: Prior to the initial use of the wireless activa-

tion function with each tool, the tool registration is



tool, the re-registration is not required unless it is

cancelled.

NOTE: Before registration, be sure that the wireless

unit is properly inserted.

NOTE: One wireless unit can register up to 10 links

with other wireless units. If more than 10 other wire-

less units are registered to one wireless unit, the one

registered earliest will be cancelled automatically.

NOTE: The position of the wireless activation button

varies depending on the tool.

NOTE: The cleaner also starts by pressing the power

button when the stand-by switch is set to "AUTO".

However the power button will not actuate when the

wireless activation function is used.

Installing the wireless unit

WARNING: Open the lid when you install the



lid after installing it.

CAUTION: 

stable surface when installing the wireless unit.

NOTICE:

Clean the dust and dirt on the cleaner

before installing the wireless unit. Dust or dirt may cause

malfunction if it comes into the slot of the wireless unit.

NOTICE:

To prevent the malfunction caused by

static, touch a static discharging material, such as

a metallic part, before picking up the wireless unit.

NOTICE:

When installing the wireless unit, always

be sure that the wireless unit is inserted in the cor-

rect direction and the lid is completely closed.

1. Loosen the screw to open the lid on the cleaner as



Fig.26: 1. Lid 2. Screw

2. Insert the wireless unit to the slot.



with the recessed portions on the slot.

Fig.27: 1. Wireless unit 2.3. Lid

4. Recessed portion

3. Tighten the screw completely to close the lid.

Tool registration for the cleaner

NOTE: A Makita tool supporting the wireless activa-

tion function is required for the tool registration.

NOTE: Finish installing the wireless unit to the tool

before starting the tool registration.

NOTE: During the tool registration, do not pull the

switch trigger on the tool or turn on the power switch

on the cleaner.

NOTE: Refer to the instruction manual of the tool, too.

If you wish to activate the cleaner along with the



beforehand.

1. Install the wireless units to the cleaner and the

tool, respectively.

2. Install the batteries to the cleaner and the tool.

3. Set the stand-by switch on the cleaner to "AUTO".

Fig.28: 1. Stand-by switch

4. Press the wireless activation button on the cleaner

for 3 seconds until the wireless activation lamp blinks in

green. And then press the wireless activation button on

the tool in the same way.

Fig.29: 1. Wireless activation button 2. Wireless

activation lamp

If the cleaner and the tool are linked successfully, the

wireless activation lamps will light up in green for 2

seconds and start blinking in blue.

NOTE:

in green after 20 seconds elapsed. Press the wireless

activation button on the tool while the wireless acti-

vation lamp on the cleaner is blinking. If the wireless

activation lamp does not blink in green, push the wire-



NOTE: When performing two or more tool registration



Starting the wireless activation

function

NOTE: Finish the tool registration for the cleaner for

wireless activation.

NOTE: Always place the cleaner so that you can see

the status of the wireless activation lamp.

NOTE: Refer to the instruction manual of the tool, too.

After registering a tool to the cleaner, the cleaner will

automatically runs along with the switch operation of

the tool.

1. Install the wireless units to the cleaner and the

tool, respectively.

2. Install the batteries to the cleaner and the tool.

3. Connect the hose of the cleaner with the tool.

Fig.30

4. Set the stand-by switch on the cleaner to "AUTO".

Fig.31: 1. Stand-by switch

20 ENGLISH

5. Push the wireless activation button on the tool



Fig.32: 1. Wireless activation button 2. Wireless

activation lamp

6. Turn on the tool. Check if the cleaner runs while

the tool is operating.

CAUTION: Always check if the wireless acti-

vation function works before starting a work with

the tool.

To stop the wireless activation, push the wireless activa-

tion button on the tool, or set the stand-by switch on the

cleaner to "I" or "O".

NOTE: The wireless activation lamp on the tool will

stop blinking in blue when there is no operation for

2 hours. In this case, set the stand-by switch on the

cleaner to "AUTO" and press the wireless activation

button on the tool again.

NOTE: The cleaner starts/stops with a delay. There is

a time lag when the cleaner detects a switch opera-

tion of the tool.

NOTE: The transmission distance of the wireless unit

may vary depending on the location and surrounding

circumstances.

NOTE: When two or more tools are registered to one

cleaner, the cleaner may start running even if you do

not turn on the tool because other user is using the

wireless activation function.

Cancelling tool registration for the

cleaner

Perform the following procedure when cancelling the

tool registration for the cleaner.

1. Install the wireless units to the cleaner and the

tool, respectively.

2. Install the batteries to the cleaner and the tool.

3. Set the stand-by switch on the cleaner to "AUTO".

Fig.33: 1. Stand-by switch

4. Press the wireless activation button on the cleaner

for 6 seconds. The wireless activation lamp blinks in

green and then become red. After that, press the wire-

less activation button on the tool in the same way.

Fig.34: 1. Wireless activation button 2. Wireless

activation lamp

If the cancellation is performed successfully, the wire-

less activation lamps will light up in red for 2 seconds

and start blinking in blue.

NOTE:

red after 20 seconds elapsed. Press the wireless acti-

vation button on the tool while the wireless activation

lamp on the cleaner is blinking. If the wireless acti-

vation lamp does not blink in red, push the wireless



Erasing all tool registrations

You can erase all tool registrations from the cleaner as

follows.

Fig.35: 1. Stand-by switch 2. Wireless activation

button 3. Wireless activation lamp

1. Install the wireless unit to the cleaner.

2. Install the batteries to the cleaner.

3. Set the stand-by switch to "AUTO".

4. Hold down the wireless activation button for about

6 seconds until the wireless activation lamp blinks in red

(about twice per one second).

5. When the wireless activation lamp starts blinking



button. Thereafter, hold down the wireless activation

button again for about 6 seconds.

6. When the wireless activation lamp starts blinking

fast (about 5 times per one second) in red, release your



wireless activation lamp lights up in red and later lights



NOTE: If the wireless activation lamp does not blink



try again.

Sayfa yükleniyor ...

Makita VC006GM Kullanım kılavuzu

Marka: Makita

Model: VC006GM

Tip: Kullanım kılavuzu

PDF İndir

rapor

Diğer dillerde

español: Makita VC006GM Manual de usuario
français: Makita VC006GM Manuel utilisateur
italiano: Makita VC006GM Manuale utente
Deutsch: Makita VC006GM Benutzerhandbuch
português: Makita VC006GM Manual do usuário
dansk: Makita VC006GM Brugermanual
Nederlands: Makita VC006GM Handleiding

Makita VC006GM Kullanım kılavuzu

Makita VC006GM Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler