6 ARZUM
7ARZUM
• Theoutersurfaceofyourappliancemaybehotwhileoperating,sodo
not touch hot surfaces, always use handle or on / off button.
• Unplugfromoutletwhennotinuseandbeforecleaning.Allowitto
cool down before cleaning the appliance.
• Useyourappliancewithitsownpowerbaseunitonly.Donotplaceit
on power base which belong to the other appliances.
• Thekettlewillswitchofftheenergyautomaticallyifitisleftinoperation
while empty or while there is not sufficient water in it by mistake. In this
case allow it to cool down completely before filling with water.
• Protectyourhandsfromspoutwhenthewaterisboiling,anddonot
let children to use the appliance.
• Neverswitchontheappliancewhenitslidisopen.Neveropenthelid
whilethewaterisboiling.Alwaystakecaretopourboilingwaterslowly
and carefully without tipping the kettle too fast.
• Beforeoperatingthekettleensurethatthelidisttedcorrectly,
otherwise your kettle may not switch off automatically.
• Alwaysremoveyourkettlefromitspowerbase
before filling. Ensure that the water level is below
the max mark.
• Do not operate your appliance when the water
filter is not placed on the inner side of the spout.
• NEVER immerse the appliance, power base unit,
or electric plug in water or other liquids, nor wash
in a washing dish machine, nor use in bathroom or
any other places with a high rate of moisture.
• NEVER leave the power base unit and electrical connection ends of
your device in a damp state. If wetted, unplug before drying and no not
operate the appliance before having it dried completely.
• Useyourapplianceforitsintendedpurposesasrecommended.
USING YOUR KETTLE
WARNING: Do not use the kettle for any other purposes other than
boiling water. NEVER fill with any other liquids or solutions.
• Beforetherstuse,washyourkettlewithcoldwateratseveraltimes,
thenllwithwateruptotheMAXwaterlevel,andthenboilthewater
until your appliance shuts of automatically. Pour out the water and wash
it with cold water. Repeat this operation for three times and then allow
your appliance to cool down.
EN
• Openthelidofyourkettlebypushingthe
lidopeninglock.Thenllyourkettlewithwater
according to the desired amount and close the
lid.Thewaterlevelindicatorwillshowyouhow
muchwateryouhaveputinthereservoir.Take
care not spill any water to base power unit, so
fill your kettle after removing from the base
unit.
• Fillthekettlewithwateralwaysbetween
the levels min. (0.5 lt) and max. (1 lt) marks.
If you try to boil water under the minimum
level, it may cause early switching off the
appliance, and if you try to boil water above
the maximum level, it may cause the water to
overflow.
•Unrollthecable
from the cable
winding section completely. Place the
reservoironthepowerbaseunit.Makesure
that it locates on the power base correctly;
otherwise your kettle could not be switched
on. Plug in the mains plug.
• Pressthebottomoftheon/offswitchto“I”
location and operate your appliance.
• Whenthewaterhasboiled,yourkettlewill
automatically switch off, the switch will return
to the off location and the indicator light will go
out.
• Ifyouneedtoswitchyourkettleoffbefore
the water boils, please push the on / off switch
from on location to off location.
NOTE: Ensure that your kettle has switched
off automatically, or is switched off manually
and is disconnected, before moving it from
the power base unit.
• Takeyourkettlecarefullyfromthebaseunit
and pour boiling water slowly to avoid the risk
of splashing.