Hoover HOZ3150IN/E Kullanım kılavuzu

PROPERTY OF

CL N° REV. DATE

SPECIFICATION

1/1

MODIFY DESCRIPTION

MODIFIED BY

BASE CODE

TREATMENT

MATERIAL

DATE SIGNATURE

DRAWN

CHECKED

FOR

WEIGHT SCALE

SIZE

NAME

(LOCAL LANGUAGE)

PART CODE

SHEET

REPLACE No ORIGIN CL No Class Specification

FR

RELEASE LEVEL

WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN

OF EU DIRECTIVE 2002/95/CE + AMENDMENTS

MATERIALS IN COMPLIANCE WITH REQUIREMENTS

A5

------------

09.05.2019

KULLANMA KILAVUZU H HNTTF08

55196

09.05.2019

Y.GÜLTÜRK

-

USER MANUAL H HNTTF08

HOOVER OVEN

GENERAL TOLERANCE

ISO 2768 - m

-

SC 000-000

PRODUCTION RELEASED

------------

A

B

C

D

E

42831699

70 gr/m

2

PAPER TECHNICAL DATA SHEET / KAĞIT MALZEMESİ

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

KULLANIM KILAVUZU

FIRINLAR

POKYNY PRO UŽIVATELE

TROUBY

EN

FR

02

15

IT

ES

29

42

DE

55

TR

CZ

68

83

• HOZ3150

• HOZ6901

CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy

INSTRUKJA OBSŁUGI

PIEKARNIKI DO ZABUDOWY

PL

96

Safety Indications

• Children under 8 must be kept at a safe distance from the appliance if

not continuously supervised.

• Children must not play with the appliance. The appliance can be used

by those aged 8 or over and by those with limited physical, sensorial or

mental capacities, without experience or knowledge of the product,

only if supervised or provided with instruction as to the operation of the

appliance, in a safe way with awarenessof the possible risks.

• Cleaning and maintenance should not be carried out by unsupervised

children.

•T he oven must be switched off before removing the removable parts

and, aftercleaning, reassemble them according the instructions.

• Only use the meat probe recommended forthis oven.

• Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

• WARNING: ensure that the appliance is switched off before replacing

the bulb, toavoidthe possibility of electric shocks.

- Do not place tea towels

- Remove large or coarse foodresidues from the inside of the oven using

a damp sponge. Do not use detergents;

• During cooking, moisture may condense inside the oven cavity or on

the glass of the door. This is a normal condition. To reduce this effect,

wait 10-15 minutes after turning on the power before putting food

inside the oven. In any case, the condensation disappears when the

ovenreaches the cooking temperature.

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• Cook the vegetablesin a container with a lid instead of an open tray.

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touch anyhot parts.

• WARNING: the accessible parts can become hot when the oven is in

use. Childrenmust be kept at a safe distance.

• WARNING: before initiating the automatic cleaning cycle:

- Clean the ovendoor;

- Remove all accessories and the sliding rackkit (where present);

• In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with

the nut when the meat probe is not used.

EN 02

• During the pyrolytic cleaning process, surfaces can heat up more than

usual, childrenmust thereforebe kept at a safe distance.

• The appliance must not be installed behind a decorative door in order

toavoidoverheating.

• If the power cable is damaged, it must be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity.

• WARNING: Do not line the oven walls with aluminum foil or single-use

protection available from stores. Aluminum foil or any other protection,

in direct contact with the hot enamel, risk melting and deteriorating the

enamel of the insides.

• Anyexcess of spilled materialshould be removed beforecleaning.

• Failure to comply with the above can compromise the safety of the

appliance and invalidatethe guarantee.

• The disconnection may be achieved by having the plug accessible or

by incorporating a switch in the fixed wiring in accordance with the

wiring rules.

The shelf mustbe inserted completely into the cavity

• WARNING: Never removethe oven door seal.

• No additional operation/setting is required in order to operate the

appliance atthe rated frequencies.

• The type of powercable mustbe H05V2V2-F.

•Do not use a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must be

having the earth contact connected and in operation. The earth

conductoris yellow-green in colour. This operation should be carried out

by a suitably qualified professional. In case of incompatibility between

the socket and the appliance plug, ask a qualified electrician to

substitute the socket with another suitable type. The plug and the

socket must be conformed to the current norms of the installation

country. Connection to the power source can also be made by placing an

omnipolar breaker between the appliance and the power source that

can bear the maximum connected load and that is in line with current

legislation. The yellow-green earth cable should not be interrupted by

the breaker. The socket or omnipolar breaker used for the connection

should be easily accessible when the appliance is installed.

EN 03

Summary

EN 04

General Instructions

5

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

7

3.1 Display description

3.2 Cooking modes

Use of the Oven

8

4.1 General notes on cleaning

4.2 Steam cleaning

4.3 Maintenance

• Removal and cleaning of grills

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

11

5.1 F.A.Q.

Troubleshooting

14

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model you havepurchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsible foranydamageresultingfrom improper, incorrector unreasonableusage.

The use of anyelectricalapplianceimplies the observance of some fundamental rules:

- do not pull on the power cable to disconnect the plug fromthesocket;

- in general the use of adaptors, multiplesockets and extensioncablesis not recommended;

- in case of malfunction and/orpoor operation,switch offtheappliance and do nottamperwith it.

- do not touchthe appliance with wet or damp hands or feet;

1.2 Electrical Safety

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the power supply.

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation.The manufactureracceptsno responsibility forany damage caused by the failuretoobserve

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section that can ensure correctsupplytothe oven.

CONNECTION

- power voltageindicated on the gauge;

WARNING

- the setting of the disconnector.

Before connecting the oven to the powersupply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connectedtotheelectricalsupply, it is important to check:

EN 05

1.3 Recommendations

Aftereach use of the oven,a minimum of cleaning will help keepthe ovenperfectly clean.

Do not line the oven walls with aluminium foil or single-use protectionavailable from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

we advise you only use dishes and baking moulds resistant toveryhigh temperatures.

1.4 Installation

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internalparts. Make the openings specified on last page accordingtothe type of fitting.

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor such harm or injury.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is important that the WEEE undergo specific treatments to correctly removeand

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a fewbasic rules:

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residual heat that the ovencontinues togenerate.Keeptheseals clean and in order, to avoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtariff time slot.

SAVING AND RESPECTINGTHE ENVIRONMENT

- the WEEE should not be treatedas domestic waste;

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the applianceis of an equivalent type and has the same functions as the purchasedappliance.

1.6 Declaration of compliance

The parts of this appliance thatmaycomeintocontact with foodstuffscomply with the provisions of EEC

Directive89/109.

By placing the mark on this product,we are confirming compliance to all relevant European safety,

health and environmental requirementswhich areapplicablein legislation forthisproduct.

EN 06

2. Product Description

2.1 Overview

1

2

3

5

4

6

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories

Metal grill

2

Drip pan

1

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foodson the grills.

EN 07

3

Chef Panel

All ovens with this technology boast a function

typical of professional models, the fruit of

innovative technologies and the vast experience

acquired by the Candy Hoover Group in this

sector. The Chef Panel is an air conveyor that

increases air circulation inside the oven. This

allows for an increase in oven cooking

performance, more standard cooking of food at

all temperatures, shorter cooking times and,

lastly, a uniform temperature distribution inside

the oven.

Lateral wire grids

4

Lateral wire grid if included.

2.3 First Use

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

PRELIMINARYCLEANING

EN 08

3. Use of the Oven

3.1 Display description

3. Cooking time

5. Temperature or clock display

7. Thermostat selector knob

1. Minute minder

2. Clock setting

4. End of cooking

6. LCD display adjustment controls

8. Function selector knob

8

WARNING : the first operation to carry out after the

oven has been installed or following the

interruption of power supply (this is recognizable

the display pulsating and showing ) is setting

the correct time. This is achievedasfollows.

12:00

•Pushthe centralbutton.

•Set time with "-" "+" buttons.

•Releaseall buttons.

ATTENTION: The oven will only operate providingthe

clock is set.

EN 09

FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDEDHOW TO USE

KEY LOCK

MINUTE

MINDER

COOKING

TIME

END OF

COOKING

•Child Lock function is

activated by touching Set

(+) for a minimum of 5

seconds. From this

moment on all other

function are locked and

the display will flash

STOP and preset time

intermittently.

•Child Lock function is

deactivated by touching

touchpad Set (+) again

for a minimum of 5

seconds. From this

moment on all functions

areselectable again.

•Push the central button

1 times

•Press the buttons "-"

"+"

to set the required time

•Release all the buttons

•When the set time as

elapsed an audible alarm

is activated (this alarm

will stop on its own,

however it can be

stopped immediately by

pressing the button)

SELECT.

•Sounds an alarm at the

end of the set time.

•During the process, the

display shows the

remaining time.

•Allows to use the oven as

alarm clock (could be

activated either with

operating the oven or with

out operating the oven)

• Push the central button

2 times

• Press the buttons "-" or

"+"to set the lenght of

cookingrequired

• Release allbuttons

•Setthecooking

function with the oven

function selector

• It allows to preset the

cooking time required for

the recipechosen.

• To check how long is left

to run press the SELECT

button2 Times.

• To alter/change the

preset time press SELECT

and "-" "+" buttons.

•Push any button to

stop the signal. Push the

central button to return

to the clock

function.

•When the time is elapsed

the oven will switch off

automatically.

Should you wish to stop

cooking earlier either turn

the function selector to 0, or

set time to 0:00

(SELECTand"-" "+" buttons)

•Atthetimeset,the

oven will switch off. To

switch off manually,

turn the oven function

selectorto positionO.

•Enables you to set the

end of cooking time

•To check the preset

time push the central

button3 times

•To modify the preset

time press buttons

SELECT+ "-" "+"

•

•Press the

buttons "-" "+" to set the

time at which you wish

the ovento switchoff

Push the central button

3 times

•Releasethe buttons

•Set the cooking

function with the oven

function selector.

•This function is typically

used with “cooking time”

function.

For example if the dish has

to be cooked for 45 minutes

and needs to be ready by

12:30, simply select the

required function, set the

cooking time to 45 minutes

and the end of cooking time

to12:30.

•At the end of the cooking

set time, the oven will

switch off automatically and

an audible alarm will ring.

•Cooking will start

automatically at 11:45

(12:30 minus 45 mins) and

will continue until the pre-

set end-of-cooking-time,

when the oven will switch

itself off automatically.

WARNING.

If the END of cooking is

selected without setting the

length of cooking time, the

oven will start cooking

immediately and it will stop

at the END of cooking time

set.

T °C

default

180

210

200

210

40

L3

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 230

150 ÷ 220

50 ÷ 240

L1 ÷ L5

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

GRILL: use the grill with the door closed.

Grill: 2140 W Barbecue: 3340 W

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed

forgrills, kebabs and gratin dishes. White meats should be put at a distance from the

grill; the cooking time is longer, but the meat will be tastier. You can put red meats

and fish fillets on the shelf with the drip tray underneath. The oven has two grill

positions:

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking

thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be

grilled directly on the shelf centrally, at the middle level. Slide the drip tray under the

shelf to collect the juices. Make sure that the food is not too close to the grill. Turn

the food over halfwaythroughcooking.

FAN ASSISTED GRILL : use the turbo-grill with the door closed.

FAN COOKING: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives even heat distribution and the smells are not mixed.

Allow about ten minutes extrawhen cooking foods at the same time.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes

without the proteincontentof the food being changed or altered.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

3.2 Cooking Modes

FAN + LOWER ELEMENT: The bottom heating element is used with the fan

circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

Place the shelf in the bottomposition.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

EN 10

*

220 50 ÷ 280

CONVENTIONAL COOKING: Both top and bottom heating elements are used.

Preheat the oven for about ten minutes. This method is ideal for all traditional

roasting and baking. For seizing red meats, roast beef, leg of lamb, game, bread,

foilwrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf

in mid position.

*

BOTTOM: Using the lower element. Ideal for cooking all pastry based dishes.

Use this for flans, quiches, tarts, pate and any cooking that needs more heat

frombelow.

PIZZA - With this function hot air circulated in the oven to ensure perfect result

fordishes such as pizza or cake.

The " " function allows you to cook in a healthier way, by reducing the amount of

fat or oil required. Thanks to the use of the grill and fan combined with a pulsating

cycle of air, it will retain the moisture content of the food, grilling the surface and

using a shorter cooking time, without compromisingon taste.

ECO

It is particularly suitable for cooking meat, roasted vegetables and omelettes. The

cycle of pulsed air keeps the humidity inside the oven and the moisture content of

the food, preserving the nutritional values and ensuring a rapid uniform cooking

process.

Try all your recipes and reduce the amount of dressing you usually use and

experiencethe lightness of this new function!

210 50 ÷ 230

220 50 ÷ 230

190 50 ÷ 230

EN 11

4. Oven cleaning and maintenance

4.1 General notes on cleaning

If dirty, theseal can be cleaned with a slightly damp sponge.

After using the grill, remove the pan from the oven.Pourthe hot fat into a container and wash the pan in

hot water, using a spongeand washing-upliquid.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

OVENWINDOW SEAL

The lifecycle of the appliance canbe extended throughregular cleaning. Waitfor the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

DRIP PAN

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercialoven detergent. Neverput a dirty pan back intothe oven.

4.2 Steam Cleaning

This procedure uses steam to help remove remaining fat and food particles from the oven.

2. Set the oven function to Static ( )or Bottom heater ( ).

1. Pour 300 ml of water into the bottom of the oven.

5. After 30 minutes switch off the program and allow the oven to cool down.

Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.

Warning: Make sure that the appliance is cool before you touch it.

3. Set the temperature at 90°C.

6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

4. Allow the program to operate for 30 minutes.

300 ml

REMOVAL AND CLEANINGOF THE SIDE RACKS

1. Unscrew the bolt in an anti-clockwise direction.

2. Removethe side racks by pulling them towardsyou.

3. Clean the side racksin a dishwasheror with a wet sponge and then dry them immediately.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully

tightened.

4.3 Maintenance

A

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replace the window by carrying out the procedure in reverse.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

EN 12

LOW-E

1

2

3

1.

2.

3.

4.

5.

6.

7.

1. Open the ovendoor.

REMOVAL AND CLEANINGOF THE GLASS DOOR

2.3.4. Lock the hinges,remove the screws and removethe upper metalcover by pulling itupwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

7. Atthe end of cleaning orsubstitution,reassemble the parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-hand lateralhinge. In this way, the printed label of the firstglass will be inside the door.

EN 13

CHANGING THE BULB

2. Undo the glass cover, unscrew the bulb and replaceit with a new bulb of the same type.

3. Once the defective bulb is replaced,replace the glass cover.

1. Disconnect the oven from the mains supply.

5.

5.1 FAQ

Troubleshooting

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 14

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

• Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des

enfants sans surveillance.

• ATTENTION: les parties accessibles peuvent devenir très chaudes quand

le four est en marche. Les enfants doivent être tenus à une distance de

sécurité.

• Pendant la cuisson de l’humidité peut se créer dans la cavité ou sur la

surface de la porte. Le cas décrit est normal. Si on veut reduire cet effet, il

faut laisser réchauffer le four 10-15 minutes avant d’introduire les

aliments. L’humidité va disparaître grâce à la juste température de cuisson.

• Les enfants ne doivent jouer avec l'appareil.

• Nous vous conseillons de faire la cuisson des légumes dans un récipient

avec couvercle pas sur un plateau.

• Une fois que la cuisson est terminée, nous vous conseillons de ne pas

laisser les aliments à l’intérior de la cavité pour plus de 15/20 minutes.

• AVERTISSEMENT: L'appareil et les parties accessibles deviennent

chauds pendant l'utilisation. Des précautions doivent être prises pour

éviter de toucher les éléments chauffants.

• Cet appareil n'est pas destiné à être utilisé par des personnes (y compris

les enfants) dont les capacités physiques, sensorielles ou mentales sont

réduites, ou ayant un manque d'expérience et de connaissances, à moins

qu'elles n'aient été formées à l'utilisation de l'appareil, par une personne

responsable de leur sécurité.

• En cours d'utilisation l'appareil devient chaud. Des précautions doivent

être prises pour éviter de toucher les éléments chauds à l'intérieur du four.

AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes

pendant l'utilisation. Les jeunes enfants doivent être tenus à l'écart.

• Le four doit être éteint avant d'enlever la protection et après le

nettoyage, la protection doit être replacé en respectant les instructions.

• Utiliser seulement la sonde de température recommandée pour ce four.

• Ne pas utiliser de nettoyants vapeur pour le nettoyage.

• Brancher le câble d’alimentation sur une prise de courant qui supporte

le voltage ; le courant et la charge sont indiqués sur l’étiquette ; vérifier la

présence d’une mise à la terre. La prise d’alimentation doit supporter la

charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état

• Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques tranchants

pour nettoyer la vitre de la porte du four car ils peuvent rayer la surface,

entrainant des risques d'explosion.

FR 15

Conseils De Securite

•Le câble d’alimentation requis est le H05V2V2-F.

de fonctionnement. Le conducteur de mise à la terre est jaune et vert.

Cette opération doit être exécutée par du personnel qualifié. En cas

d’incompatibilité entre la prise d’alimentation et la fiche du câble de

l’appareil, demander à un électricien professionnel de remplacer la prise

d’alimentation par un dispositif compatible. La fiche du câble

d’alimentation et la prise d’alimentation doivent être conformes aux

normes en vigueur dans le pays d’installation. Il est possible de brancher

l’appareil à la prise d’alimentation en installant un disjoncteur multipolaire

qui supporte la charge électrique maximale, conformément aux lois en

vigueur, entre l’appareil et la prise d’alimentation. Le conducteur jaune et

vert de mise à la terre ne doit pas être bloqué par le disjoncteur. La prise

d’alimentation ou le disjoncteur multipolaire utilisé pour le branchement

doit rester à tout moment accessible lors de l’installation de l’appareil.

•Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabriquant ou

en contactant le service après-vente.

•Le débranchement doit se faire en accédant à la prise d’alimentation ou

en prévoyant un interrupteur sur le circuit électrique fixe, conforme aux

normes électriques.

•Tout produit déversé en quantité doit être éliminé avant le nettoyage.

•Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir beaucoup

plus chaude que d’habitude, les enfants doivent donc être tenus à une

distance de sécurité.

•Ne pas installer l’appareil derrière une porte décorative, pour éviter la

surchauffe.

•En introduisant le plateau dans le four, s’assurer que le stop est dirigé

vers le haut et au fond de la cavité.

Le plateau doit complètement être inséré dans la cavité

• AVERTISSEMENT: Ne tapissez pas les parois du four avec du papier

aluminium ou un autre matériau de protection jetable en vente dans le

commerce. Tout papier aluminium ou autre matériau de protection qui

entrerait au contact direct de l'émail chaud risquerait de fondre et de

détériorer l'émail intérieur du four.

• AVERTISSEMENT : Ne retirez jamais le joint de la porte du four.

• Aucun réglage/opération supplémentaire n’est requis pour faire

fonctionner l’appareil aux fréquencesnominales.

•Le non-respect des consignes ci-dessus peut compromettre la sécurité

de l’appareil et annuler la garantie.

FR 16

SOMMAIRE

FR 17

Instructions Générales

18

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

20

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

22

4.1 Remarques générales concernant

le nettoyage

4.2 Nettoyage à la vapeur

4.3 Entretien

• Retrait et nettoyage des grilles

• Retrait de la porte du four

• Retrait et nettoyage des vitres

• Remplacement de l'ampoule

Nettoyage du four et

maintenance

25

5.1 F.A.Q.

Dépannage

28

1. Instructions générales

REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier

selon les modèles.

Nous vous remercions d'avoir choisi un de nos produits.

Pourobtenir les meilleurs résultats avecvotrefour, vous

devezlire attentivement ce manuel et le conserver pour

toute consultation ultérieure. Avant d'installer le four,

notez le numéro de série, il vous sera demandé par le

support technique si des réparations sont nécessaires.

Après avoir enlevé le four de son emballage, vérifiez

qu'il n'a pas été endommagé pendant le transport. Si

vous avez des doutes, ne pas utiliser le four et se référer

à un technicien qualifié pour obtenir des conseils.

Conservez tous les matériaux d'emballage (sacs en

plastique, polystyrène, clous) hors de la portée des

enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre

provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce

phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline

toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas

respectées.

1.1 Indications de sécurité

Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute autre

utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc

. Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaise utilisation

ou a des modifications techniques du produit.

dangereuse

L'utilisationde toutappareil électrique impliquele respectde certainesrègles fondamentales:

- Ne pas toucherl'appareil avecles mains ou les piedsmouillés ou humides;

- En général l'utilisation d'adaptateurs, de prises multiples et de rallonges estdéconseillé;

- Ne pas tirersur le fil électrique pour débrancher la prise.

- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y

toucher.

1.2 Sécurité électrique

LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN

TECHNICIENDE E.QUALIFICATION SIMILAIR

L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le

pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non

respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale

reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur

dans le pays d'installation. L'alimentation électrique doit être protégéepar des fusibles appropriéset les

câblesutilisés doiventavoir une section transversalequi peut assurerune alimentation normale du four.

CONNEXION

Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique

de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir

vérifié:

- La tension d'alimentationindiquée sur le compteur;

Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne

Terre de l’installation.

- Le réglage du disjoncteur.

FR 18

1.3 Recommandations

Afin d'éviter les salissures excessives de votre four ainsi que les fortes odeurs de fumée pouvant en

résulter, nous recommandonsde ne pas utiliserle fourà tropfortetempérature. Il est préférablede

rallonger le temps de cuisson et de baisser la température. Nous vous conseillons de n'utiliser que des

plats,des moules à pâtisserie résistants à de très hautes températures.

Après chaque utilisation du four, réaliser un petit entretien qui favorisera le nettoyage parfait du four.

Ne pas tapisser les parois du four avec des feuilles en aluminium ou des protections jetables du

commerce. La feuille d'aluminium ou toute autre protection, en contact direct avec l'émail chauffé,

risque de fondre et de détériorer l'émail du moufle. Avant installation de l'appareil, il faut relever le

numérode série et le noter ci-dessous en cas d'éventuelledemande d'intervention.

1.4 Installation

La mise en service de l’appareil est à la charge de l’acheteur, le constructeur est dégagé de ce service.

Les pannes liées à une mauvaise installation ne seront pas couvertes par la garantie. Une mauvaise

installation peut provoquer des dommages aux personnes, aux animaux domestiques; dans ce cas la

responsabilité du constructeur ne peut être engagée. L'installation du four doit être réalisée par un

installateur agréé ou un technicien de qualification similaire. Le four peut être placé en hauteur dans

une colonne ou enchâssé sous un plan de travail. Avant sa fixation: il est indispensable d'assurer une

bonne aération dans la niche d'encastrement afin de permettre la bonne circulation de l'air frais

nécessaire au refroidissement et à la protection des organes intérieurs. Pour cela, réaliser les

ouverturesspécifiées selon le type d'encastrement (dernièrepage).

REMARQUE: Le four peut nécessiter une opération de S.A.V. Aussi, placez la prise de courant de façon à

pouvoir brancher le four une fois sorti de sa niche. Câble d'alimentation: si le changement du câble

d'alimentation s'avère nécessaire, nous vous demandons de faire réaliser cette opération par le service

après-vente ou une personnede qualification similaire.

ATTENTION

Faire vérifier la continuité de la terre de l’installation avant de procéder au raccordement. Le fabricant

décline toute responsabilité en cas d'accidents ou d'autres problèmes qui pourraient survenir à l'usage

d'un appareil non relié à la terre, ou reliéà une terre dont la continuitéserait défectueuse.

1.5 La gestion des déchets et la protection de l'environnement

• Ils doivent être remis aux points de collecte appropriés gérés par la municipalité ou par des sociétés

immatriculées.Dans plusieurspays,il estpossible de collecterà domicileles DEEE volumineux.

Chacun peut jouer un rôle important quant à la protection de l'environnement contre les DEEE. Pour

atteindre cet objectif, il estimpératifde suivrequelques règlesélémentaires:

Le présent appareil est marqué conformément à la directive 2012/19/UE relative aux

déchets d'équipements électriques et électroniques

(DEEE). Les DEEE contiennent à la fois des substances polluantes (qui peuvent avoir des

conséquences négatives sur l'environnement) et des éléments de base (réutilisables). Il est

important de soumettre les DEEE à des traitements spécifiques, en vue d'extraire et

d'éliminer de façon appropriée toutes les substances polluantes, puis de récupérer et

recyclertous les matériaux.

• Les DEEE ne doiventpas êtretraitéscomme des déchets ménagers.

• Lorsque vous achetez un nouvel appareil, vous devez retourner l'ancien au vendeur qui le récupère

gratuitement, au cas par cas, à condition que l'équipement soit de type équivalent et possède les

mêmes fonctionsque celui fourni.

FR 19

Sayfa yükleniyor...

Hoover HOZ3150IN/E Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Hoover HOZ3150IN/E Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler