Samsung DA-E750 Kullanım kılavuzu

Wireless Audio with Dock

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more a complete service,

please register your product at

www.samsung.com/register

DA-E750

DA-E751

2

features

AllShare Play

Play music saved on your devices (such as your PC, Smart phone, or NAS) through the Wireless Audio with Dock

via a network connection.

AirPlay

Play music saved on your Apple devices on the Wireless Audio with Dock.

Dual Docking Audio Speaker System

Using the system's dual docking station, dock, charge, and then play either Samsung Galaxy devices or Apple

devices through the system's built-in speakers.

USB Host support

Connect and play music files from external USB storage devices such as MP3 players, USB flash memory, etc.

using the Wireless Audio with Dock's USB HOST function.

Bluetooth Function

Connect a Bluetooth device to the Wireless Audio with Dock and enjoy music from the device with high quality

stereo sound, all without wires!

aptX

®

aptX enables high quality Bluetooth stereo audio, delivering wired audio quality wirelessly.

LICENSE

AirPlay, AirPlay logo, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries. iPad is a trademark of Apple lnc.

3

EnG

safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important instructions

accompanying the product.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains

plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the

apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power

plug must be easily and readily accessible at all times.

Hereby, Samsung Electronics, declares that this [Wireless Audio with Dock] is in compliance

with the essential requirements and other relevant provisions of Directive 1999/5/EC.

The official Declaration of Conformity may be found at http://www.samsung.com,

go to Support > Search Product Support and enter the model name.

This equipment may be operated in all EU countries.

In France, this equipment may only be used indoors.

4

PRECAUTIONS

Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the

back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (70~100

mm). Make sure the ventilation slots are not covered. Do not place the

unit

on amplifiers or other equipment which may become hot. This

unit

is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to

leave it unused for a long period of time.

During thunderstorms, disconnect the AC plug from the

wall outlet. Voltage peaks due to lightning could damage the unit.

Protect the

product

from moisture (i.e. vases) , and excess heat

(e.g.fireplaces) or equipment creating strong magnetic or electric fields

Disconnect the power cable from the AC supply if the unit malfunctions.

Your

product

is not intended for industrial use. This product is for

personal use only.

Condensation may occur if your

product

has been stored in cold temper-

atures. If transporting the

unit

during the winter, wait approxi

mately 2 hours

until the unit has reached room temperature before using.

Do not expose the unit to direct sunlight or other heat sources.

This could cause the unit to overheat and malfunction.

The batteries used with this product contain chemicals that are harmful to

the environment.

Do not dispose of batteries in the general household trash.

The batteries used with this product contain chemicals that are harmful to

Phones

3.9 inch 3.9 inch

2.7 inch

3.9 inch

99.1mm

68.6mm

99.1mm

5

EnG

contents

FEATURES

2

2 Features

2 License

SAFETY INFORMATION

3

3 Safety warnings

4 Precautions

GETTING STARTED

6

6 Before reading the user’s manual

6 What’s included

DESCRIPTIONS

7

7 Top/Front/Rear Panel

REMOTE CONTROL

9

9 Tour of the remote control

POWER ON AND VOLUME

CONTROL

10

10 Turning the Power on/off

10 Adjusting the volume

CONNECTIONS

11

11 Installing the Toroidal Ferrite on the Power

Cable

11

Installing the Ferrite Core on the LAN Cable

12 Using the Spacer Cover

13 Connecting a device to the Dual Dock

14 Connecting an audio device using AUX IN

15 Connecting to your Network

21 Connecting to Bluetooth devices

PLAYING

23

23 Using the TV mode (SoundShare)

23 Using the docking mode with Samsung

Galaxy and Apple Devices

25 Using the Bluetooth mode

26 Using the USB mode

27 Using AirPlay and AllShare Play mode

FUNCTIONS

28

28 Basic functions

29 Advanced functions

30 Software upgrade (only USB mode)

TROUBLESHOOTING

31

31 Troubleshooting

APPENDIX

32

32 Specifications

6

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

Icons used in this manual

Icon Term Definition

Caution

Indicates a situation where a function does not operate or settings may be

canceled.

Note

Indicates tips or instructions on the page that help a function operate.

Safety Instructions and Troubleshooting

1) Familiarise yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 31)

Copyright

written permission of Samsung Electronics Co.,Ltd.

getting started

▪ The appearance of the accessories may differ slightly from the illustrations above.

WHAT’S INCLUDED

Check for the supplied accessories shown below.

MUTE

VOL

BASS

FUNCTION

Remote Control / Lithium Battery (3V) Power Cable

Audio Cable LAN Cable

(Large)

(For Power Cable 1EA)

(Small)

(For LAN Cable 1EA)

Toroidal Ferrite Core

Spacer Cover/

Protection Cover

Cloth User Manual

7

EnG

● DEscriPtions

descriptions

TOP/FRONT/REAR PANEL

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

1

2

3

5

9

10

6

7

8

4

11

<TOP>

VACUUM

TUBE AMP

<FRONT>

<REAR>

8

PLAY/PAUSE

BUTTON

Play or pause a music file.

FUNCTION

BUTTON

Switches the mode as follows :

; ; ; ; ; ; AUX (LED Off)

VOLUME +/-

BUTTON

Controls the volume level.

FUNCTION

DISPLAY

When you change the mode with the Function button, the icon of the

selected mode is displayed in white on the Function Display.

The LED blinks when you turn the power on and stops blinking when

the unit is on and ready to play.

5

DUAL DOCK

Provides a 5 pin dock for Samsung Galaxy devices and a 30 pin dock

for Apple devices.

6

LAN TERMINAL

Lets you connect to a network using a LAN cable.

7

WPS/RESET

BUTTON

Used in procedures for connecting the unit to wireless networks.

8

USB PORT

Connect an external USB storage device such as an MP3 player here

to play files located on the device.

9

POWER JACK

Connect the power cord to this product.

10

AUX IN

Connect to the Analog output of an external device.

11

ONLY FOR

SERVICE

This jack is for service only.

▪ When you turn on this unit, it needs about 20 seconds to heat-up the Vacuum tube and

produce stable sounds.

▪ To update the product’s software via USB port, it is required to use a USB memory device.

▪ When holding or moving the product, care must be taken as there is located the woofer

speaker in the bottom of the product.

▪ This unit can connect to mobile devices with high audio output levels. When you connect this

unit to external devices with high output levels, it may lower the audio output to protect the amp

and speakers.

▪ When disconnecting the power cable from the wall outlet, hold the plug.

Do not pull the cable.

▪ If you put other electronic products on top of the product, audio from the product may be

distorted.

▪ Please make sure children do not touch the product's surface when the product is on.

The surface will be hot.

9

EnG

● rEmotE control

remote control

TOUR OF THE REMOTE CONTROL

Installing battery in the Remote Control

1.

Open the cover of the remote

control by putting your fingernail

into the gap between the cover

and body of the remote control.

Then, lift the cover and separate

it completely.

2.

Install a 3V Lithium battery.

Insert the battery into the battery

compartment with the + side facing

up.

3.

Fit the remote control's cover to the

remote control. Next, lower the cover so

that it is flush with the body of the remote,

and then press the cover into the body by

pushing the edges down with your hand.

Operation Range of the Remote Control

You can use the remote control up to 7 meters (23 feet) in a straight line from the unit. You can also operate the

remote at a horizontal angle of up to 30° from the remote control sensor.

MUTE

VOL

BASS

FUNCTION

POWER BUTTON

Turns the unit on and off.

CONTROL BUTTON

Search for the next or previous

music file.

VOLUME

Adjusts the volume level of the unit.

PLAY/PAUSE BUTTON

Play or pause a music file.

FUNCTION BUTTON

Selects the Function mode.

▪ Be careful not to catch your fingernail in the gap when you lift the cover. You can damage

your fingernail.

MUTE BUTTON

Mutes the sound from this unit.

Press again to restore the sound

to the previous volume level.

BASS BUTTON

Optimise the sound based on

your tastes.

10

power on and volume control

TURNING THE POWER ON/OFF

MUTE

VOL

BASS

FUNCTION

MUTE

VOL

BASS

FUNCTION

DOCK

or

1. To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode.

or,

Press POWER on the remote control.

2. To turn off this unit, press the +# button on the unit's top panel for more than 3 seconds.

or,

Press POWER on the remote control again.

▪ It will take about 20 seconds until the power of the unit turns on because of the preheating time of

the amplifier.

ADJUSTING THE VOLUME

Use +,- buttons to adjust the volume. The function LEDs light from left to right when you turn the volume up and

from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has

already been set to maximum or try to decrease the volume when it has already been set to minimum.

MUTE

VOL

BASS

FUNCTION

MUTE

VOL

BASS

FUNCTION

DOCK

or

Press the +/– button on the right side of the top panel.

or,

Press VOL +/– on the remote control.

▪ The volume level increases or decreases when you press VOL +/–.

▪ You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control

the volume. However, your ability to control the volume using the volume controls of devices connected

using Bluetooth may be limited.

11

EnG

● connEctions

connections

INSTALLING THE TOROIDAL FERRITE ON THE POWER CABLE

Wind Power cable around the core three times.

(Start winding at 5-10cm away from the plugs)

Close the lock back.

Lift up to release the lock and open the core.

INSTALLING THE FERRITE CORE ON THE LAN CABLE

Place the LAN cable on the opened core.

Close the lock back.

Lift up to release the lock and open the core.

12

USING THE SPACER COVER

Attach the space cover if you want to dock a Samsung Galaxy or Apple device having no protective case onto the

Dual Dock.

- Use it for stable installation of your device considering the shape of the device.

The Dual Dock also comes with a protective cover for the 30-pin Apple device connector. Use the protective cover

for the 30-pin connector when you attach the 5-pin Samsung Galaxy device.

See the illustrations below for additional instructions.

When docking a device, use appropriate support considering the docking device’s protective case

or the device’s shape for further stability.

Protective Cover

Used for docking devices having no protective case on it.

Spacer Cover

Protective Cover

▪ It is impossible to attach a device to the Dual Dock that has a case thicker than 1.5 mm or an unusual

rounded bottom.

13

EnG

● connEctions

CONNECTING A DEVICE TO THE DUAL DOCK

How to connect a device to the Dual Dock.

1. The DUAL DOCK is located on the back of the product. To open, push it in gently.

2. Press the

button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the

display.

~ Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

~ The selected mode is displayed in white in the Function Display.

3. If you have a Samsung Galaxy device, connect the device to the 5 pin (smaller) connector to connect to the Dual

Dock. If you have a Apple device, connect the device to the 30 pin (larger) connector on the Dual Dock.

4. Lift the device support up as shown to prevent the device from sliding or falling off the Dual Dock.

▪ Turn on your Samsung Galaxy device before you attach it to the Dual Dock.

▪ This unit doesn't support the simultaneous docking of Samsung Galaxy and Apple devices.

▪ Connect your Samsung Galaxy or Apple device to the Dual Dock before starting Docking mode.

(See page 23)

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX INWPS

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

14

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

CONNECTING AN AUDIO DEVICE USING AUX IN

This section explains how to connect the unit to an audio device.

This unit is equipped with one audio analog jack for connecting an audio device.

AUX IN

1. Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.

2. Press the

button repeatedly until the function LEDs are off.

~ The AUX mode is active when no function LED is lit.

▪ Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

AUX IN

Earphones

jack

Audio Cable

External device

15

EnG

● connEctions

CONNECTING TO YOUR NETWORK

You can connect your Wireless Audio with Dock to your network router using one of the methods illustrated on the

next few pages.

To connect the Wireless Audio with Dock to a Wired Network

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

Broadband

service

Broadband

service

Router

Broadband modem

(with integrated router)

Broadband

modem

or

Please turn off the power of the Wireless Audio with Dock before you connect the LAN Cable.

1. Turn off the Wireless Audio with Dock.

2. Connect the Wireless Audio with Dock to the router using a LAN cable.

3. Turn on the Wireless Audio with Dock.

4. Press the

button on the top panel of the Wireless Audio with Dock repeatedly until the or icon

appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

5. The

or indicator lights up in red, and changes to solid white once the Wireless Audio with Dock

connects to the router.

▪ If you connected the LAN cable when the product is on, turn the product off, then turn it on again.

▪ If failed to connect to the network, unplug the LAN cable and connect it again, and restart the product.

▪ xDSL user needs a router to make a network connection.

16

To connect the Wireless Audio with Dock to a Wireless Network

This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network.

▪ Some of network related operations may be different than explained depending on performance and

supported functions of used AP.

▪ To configure the network connection to your router or modem, see the router or modem's user manual.

▪ The Wireless Audio with Dock supports the following security protocols:

- WEP ; Open

- WPA-PSK ; TKIP

- WPA2-PSK ; AES

▪ You can also connect the Wireless Audio with Dock to a network that does not have security and has

no password.

▪ If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP

address to connect to the wireless network.

▪ Select a channel on the wireless router that is not currently being used, if the channel set for the

wireless router is currently being used by another device nearby, it will result in interference and

communication failure.

▪ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on

your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in

compliance with new Wi-Fi certification specifications.

▪ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router

performance, distance, obstacles, interference with other radio devices, etc)

▪ WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP.

▪ If you fail to set up the network, press and hold the WPS/RESET button on the rear panel until the

or indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit.

And try again.

To connect the Wireless Audio with Dock to your Apple device

having iOS 5.0 or above (Info Sharing)

This network set-up method is for users of Apple devices that have iOS 5.0 or later.

1. Connect the Apple device to your network.

2. Select

on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the

Dual Dock.

3. Press and hold the WPS/RESET button on the rear panel of the Wireless Audio with Dock with a pen

tip or similar item for more than 1 second. The

icon will blink once. Release the buttom.

4. Select <Allow> in the pop-up menu on the display of the Apple device.

5. Change the mode to the

and then the indicator will blink in red and changes to solid white.

After the Wireless Audio with Dock connects, the indicator stops blinking in red, and glows in white.

• The network connection is complete.

17

EnG

● connEctions

To connect the Wireless Audio with Dock using WPS (PBC)

1. Press the button on the top panel of the Wireless Audio with

Dock repeatedly until the

or icon appears in the display.

• Each time you press the button, the selection changes as

follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the rear panel with a

pen tip or similar item for more than 1 second. The indicator

blinks once in white. After the indicator blinks, release the

button.

• The indicator blinks in red.

3. Push the WPS/RESET button on your router or modem within

90 seconds.

4. After the Wireless Audio with Dock connects, the

or indicator changes from blinking red to

white.

• The network connection is complete.

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

PUSH

AUX IN

WPS / RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

POWER

DOCK

18

To connect the Wireless Audio with Dock through a JBC (JukeBox

Connect) Connection

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or

icon appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice

more, and then release the WPS/RESET button.

• The indicator blinks in red, and then stops blinking and glows in red when the unit accesses the

Network Setting mode.

3.To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E750

XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

4.Open the web browser of the Wi-Fi device, and then type

"http://192.168.1.1" into the address bar of the Internet browser

to access the Wireless Audio with Dock's web page.

5.In the "

Service Set ID (SSID)

" field, select the AP device (router

or modem) your Wi-Fi device is connected to.

6.Type the AP device's password into the "

WPA Passphrase

"

filed. If you want to set the static IP, press advanced settings. Fill

in the desired static IP address.

7.Press <Apply>.

If a warning appears on your Wi-Fi device, click OK.

8.When the connection between the Wireless Audio with Dock and

AP you selected is completed, the indicator on the Wireless

Audio with Dock changes to white.

• The Wireless Audio with Dock connection is complete.

The picture above is the screen which will appear on the display after

completing the network connection successfully, so you can run AirPlay

or DLNA normally.

5

6

7

19

EnG

● connEctions

To connect the Wireless Audio with Dock using a WPS PIN

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or

icon appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice

more, and then release the WPS/RESET button.

• The icon blinks in red, and then stops blinking and glows in red when the unit accesses the

Network Setting mode.

3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E750

XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

4. Open the web browser of the Wi-Fi device, and then type "http://192.168.1.1" into the address bar

of the Internet browser.

5. Press or touch Samsung Wireless Audio with Dock Status.

6. The WPS PIN number appears on the bottom of the

screen. Note or write down the number, and then turn the

Wireless Audio with Dock unit off and then on.

7. Access the Wi-Fi set-up page of your AP (wireless router or

modem) using your PC or other Internet ready device, and

then set the Wi-Fi settings to the PIN method. Refer to the

user's manual of your router or modem for instructions.

8. Type the Wireless Audio with Dock's WPS PIN number into

the appropriate field of the Wi-Fi setup page.

9. Press and hold the WPS/RESET button on the back panel

of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the

or

mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three

times, and then release the button.

• The icon blinks in red.

10. If the connection between the Wireless Audio with Dock and the AP is completed within 90

seconds, the indicator changes from red to white.

• The Wireless Audio with Dock connection is complete.

▪ The Wi-Fi Direct function is not supported by this product.

Direct connection may succeed in some cases, but it is not supported function by this

product.

6

20

BLUETOOTH

You can connect the Wireless Audio with Dock to Bluetooth devices and enjoy music with high quality stereo

sound, all without wires!

What is Bluetooth?

Bluetooth technology lets Bluetooth-compliant devices interconnect easily with each other using a short

wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or

the Wireless Audio with Dock.

- It is subject to electrical variation from obstructions caused by a wall, corner, or by office partitioning.

- It is exposed to electrical interference from same frequency-band devices including medical

equipment, microwave ovens, and wireless LANs.

• Keep the Wireless Audio with Dock and the Bluetooth device close together when pairing.

• The further the distance between the Wireless Audio with Dock and Bluetooth device, the worse the

quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when the Bluetooth device is close to the set. The connection is

automatically cut off if the Bluetooth device moves out of range. Even within range, the sound quality

may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.

▪ You may be required to enter a PIN code (password) when connecting the Bluetooth device to

the Wireless Audio with Dock. If the PIN code input window appears, enter <0000>.

▪ The Wireless Audio with Dock supports SBC data (44.1kHz, 48kHz).

▪ The AVRCP feature is not supported.

▪ Connect only to a Bluetooth device that supports the A2DP (AV) function.

▪ You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.

▪ Only one Bluetooth device can be paired at a time.

▪ Once you have turned off the Wireless Audio with Dock and the pairing is disconnected, the

pairing will not be restored automatically. To reconnect, you must pair the devices again.

▪ The Wireless Audio with Dock may not search or connect properly in the following cases:

- If there is a strong electrical field around the Wireless Audio with Dock.

- If several Bluetooth devices are simultaneously paired to the Wireless Audio with Dock.

- If the Bluetooth device is turned off, not in place, or malfunctions

- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and

gas stoves use the same frequency range as the Bluetooth device, which can cause electric

interference.

Sayfa yükleniyor...

Samsung DA-E750 Kullanım kılavuzu

Samsung DA-E750 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler