Philips Essence HR7754 Kullanım kılavuzu

Essence HR7754

Recipes & Directions for use

Recetas & Instrucciones de Uso

Receitas & Modo de Emprego

 &  

Yemek tarifleri ve kullanma

talimatları

2

3

4

ENGLISH 6

ESPAÑOL 27

PORTUGUÊS 50

 72

TÜRKÇE 96

HR7754

5

ENGLISH6

Parts and accessories

A Motor unit

B Smart process control panel

C Built-in safety lock

D Screw cap (must be placed to use bowl

functions)

E Food processing bowl

F Tool holder

G Blender jar

H Lid of blender jar

I Peg of lid (activates and deactivates the safety

switch)

J Lid of food processing bowl

K Stopper

L Feed tube

M Pusher

N Sieve of citrus press

O Cone of ccitrus press

P Juice extractor drum

Q Juice extractor pulp sieve

R Lid of juice extractor

S Pusher of juice extractor

T Metal blade + protective cover

U Kneading hook

V Balloon beater

W Shredding insert medium

X Shredding insert fine

Y Shredding insert coarse

Z Granulating insert

aInsert holder

bAdjustable slicing disc (slicing insert, carrier and

adjusting knob)

Introduction

This appliance is equipped with an automatic

thermal cut-out system.This system will

automatically cut off the power supply to the

appliance in case of overheating.

If your appliance suddenly stops

running:

1 Pull the mains plug out of the socket.

2 Let the appliance cool down for

60 minutes.

3 Put the mains plug in the socket.

4 Switch the appliance on again.

Please contact your Philips dealer or an

authorised Philips service centre if the automatic

thermal cut-out system is activated too often.

CAUTION: In order to avoid a hazardous

situation, this appliance must never be connected

to a timer switch.

Important

◗ Read these instructions for use carefully and

look at the illustrations before using the

appliance.

◗ Keep these instructions for use for future

reference.

ENGLISH 7

◗ Check if the voltage indicated on the

appliance corresponds to the local mains

voltage before you connect the appliance.

◗ Never use any accessories or parts from

other manufacturers or that have not been

specifically advised by Philips.Your guarantee

will become invalid if such accessories or

parts have been used.

◗ Do not use the appliance if the mains cord,

the plug or other parts are damaged.

◗ If the mains cord is damaged, it must be

replaced by Philips, a service centre

authorised by Philips or similarly qualified

persons in order to avoid a hazard.

◗ Thoroughly clean the parts that will come

into contact with food before you use the

appliance for the first time.

◗ Do not exceed the quantities and preparation

times indicated in the table.

◗ Do not exceed the maximum content

indicated on the bowl, i.e. do not fill beyond

the top graduation.

◗ Unplug the appliance immediately after use.

◗ Never use your fingers or an object (e.g. a

spatula) to push ingredients down the feed

tube while the appliance is running. Only the

pusher is to be used for this purpose.

◗ Always unplug the appliance before reaching

into the blender jar with your fingers or an

object (e.g. a spatula).

◗ Keep the appliance out of the reach of

children.

◗ Never let the appliance run unattended.

◗ Place the lid on the bowl in the right position.

The build-in safety lock will now be deblocked

and you will be able to turn the appliance on.

Both the motor unit and the screw cap have

been provided with marks.The appliance will

only function if the mark on the motor unit is

directly opposite the mark on the screw cap.

◗ Switch the appliance off before detaching any

accessory.

◗ Always switch the appliance off by pressing

the STOP button.

◗ Wait until moving parts have stopped running

before you remove the lid of the appliance.

◗ The screw cap can only be removed if the lid

is not on the bowl or if the bowl has been

removed altogether.

◗ Never immerse the motor unit in water or

any other fluid, nor rinse it under the tap. Use

only a moist cloth to clean the motor unit.

◗ Remove the protective cover from the blade

before use.

◗ Let hot ingredients cool down before

processing them (max. temperature

80cC/175cF).

◗ If you are processing a liquid that is hot or

tends to foam, do not put more than 1 litre

into the blender jar to avoid spillage.

◗ Unplug the appliance immediately after use.

◗ For application times, see the table further on

in these instructions for use.

Note that it is not possible to use the

bowlfunctions when the blender is attached.

ENGLISH8

Using the appliance

Smart Process Control

This appliance is equipped with a Smart Process

Control to ensure an optimal process and a

perfect end result. Each process button is linked

to a pre-programmed speed profile representing

the optimal process for a specific accessory.

You can increase or decrease the speed in three

steps by pressing + or - button.

If you press the pulse button, the appliance will

run at the highest speed.When you release the

button, the appliance will stop or return to the

previously selected working speed.

The process can always be stopped with the

Stop-button.

If you press the same process button again within

40 seconds the process starts where it has been

stopped.

Food processing bowl

C

1 Mount the bowl on the food processor by

turning the handle in the direction of the

arrow until you hear a click.

1

CLICK

2

C

2 Put the lid on the bowl.Turn the lid in the

direction of the arrow until you hear a

click (this requires some force).

Built-in safety lock

B

The motor unit, the bowl and the lid have been

provided with marks.The appliance will only

function if the mark on the motor unit is directly

opposite the mark on the screw cap.

C

1 Make sure that the dot on the lid and the

dot on the bowl are directly opposite each

other.The projection of the lid will

complete the shape of the handgrip.

Feed tube and pusher

C

1 Use the feed tube to add liquid and/or

solid ingredients. Use the pusher to push

solid ingredients through the feed tube.

C

2 You can also use the pusher to close the

feed tube in order to prevent ingredients

from escaping through the feed tube.

1

2

CLICK

ENGLISH 9

Metal blade

◗ The metal blade can be used for chopping,

mixing, blending and pureeing.

C

1 Remove the protective cover from the

blade.

The cutting edges of the blade are very sharp

Avoid touching them!

C

2 Put the tool holder in the bowl and the

blade on the tool holder.

3 Put the ingredients in the bowl. Pre-cut

large pieces of food into pieces of approx.

3 x 3 x 3 cm. Put the lid on the bowl.

4 Put the pusher in the feed tube.

C

5 Press the chopping process button on the

control panel.

- The process will start with 4 pulses to ensure

that the ingredients (i.e. onions or nuts) are

chopped regularly.

- Next the process will increase to max. speed

and continue until the STOP button is pressed.

◗ Press the - button to decrease the speed.

◗ The process can be stopped any time during

the pulses by pressing the STOP button.

Tips

◗ If you chop onions, stop the appliance after

the four pulses to prevent them from

becoming too finely chopped.

◗ Do not let the appliance run too long when

you are chopping (hard) cheese.The cheese

will become too hot, will start to melt and

will turn lumpy.

◗ Do not use the blade to chop very hard

ingredients like coffee beans, turmeric, nutmeg

and ice cubes, as this may cause the blade to

get blunt.

If food sticks to the blade or to the inside of the

bowl:

1 Turn the appliance off.

2 Remove the lid from the bowl.

3 Remove the ingredients from the blade or

from the wall of the bowl with a spatula.

Inserts

Never process hard ingredients like ice cubes

with the inserts.

ENGLISH10

C

1 Put the selected insert in the insert holder

before you place it onto the toolholder.

Cutting edges are very sharp.Avoid touching

them!

C

2 Place the insert holder onto the tool

holder that stands in the bowl.

3 Put the lid on the bowl.

4 Put the ingredients in the feed tube. Pre-

cut large chunks to make them fit into the

feed tube.

C

5 Fill the feed tube evenly for the best

results.

When you have to cut large amounts of food,

process only small batches at a time and empty

the bowl regularly between the batches.

C

6 Select the 'shredding & slicing process' on

the control panel.

The process increases immediately to the defined

processing speed to guarantee the optimal

endresult.

The process speed can be increased up to

3 times pressing the + button and decreased up

to 3 times pressing the - button.

1

2

CLICK

C

7 Press the pusher lightly onto the

ingredients in the feed tube.

◗ If you are shredding soft vegetables or fruits,

you can decrease the speed up to three steps

by pressing the - button to prevent the

shredded vegetables and fruits from turning

into puree.

C

8 To remove the insert from the insert

holder, take the insert holder in your

hands with its back pointing towards you.

Push the edges of the insert with your

thumbs to make the insert fall out of the

holder.

Adjustable slicing disc

The adjustable slicing disc allows you to cut

ingredients to any thickness you like.

Be careful: the cutting edges of the blade are very

sharp.

C

1 Insert the blade into the top of the carrier.

ENGLISH 11

C

2 Connect the knob from the bottom side

of the disc and turn it until the lines match.

Now the disc is locked.

C

3 Turn the adjusting knob to adjust the

thickness you prefer.

C

4 Place the adjustable slicing disc on the tool

holder.

5 Close the lid and put the ingredients in the

feed tube.

C

6 Select the 'shredding & slicing process' on

the control panel.

7 Press the ingredients slowly down with the

pusher, if necessary.

Kneading accessory

The kneading accessory can be used for kneading

yeast dough for bread and pizzas.

C

1 Fit the kneading accessory on the

toolholder.

2

1

C

2 Put the bowl on the motor unit, turn the

handle in the direction of the arrow and fit

the kneading accessory onto the driving

shaft.

3 Put the ingredients in the bowl.

4 Close the bowl with the lid.

C

5 Press the kneading process button on the

Smart Process Control.

The appliance will gradually increase the kneading

speed within 10 seconds to max. speed.The

appliance will continue to run at this speed until

the stop button is pressed.The speed can be

decreased up to 3 times by pressing the - button.

If the +/- button does not react the motor is

already at its physical limits.

Balloon beater

You can use the balloon beater to whisk eggs, egg

whites, instant puddings, cream.

1 Put the bowl on the motor unit and turn it

to the left until you hear a 'click'.

C

2 Put the tool holder in the bowl.

ENGLISH12

C

3 Fit the balloon beater onto the tool

holder.

4 Put the ingredients into the bowl, put the

lid on the bowl and turn it to the right

until you hear a click.

C

5 Press the whisking process button on the

control panel.

The appliance will gradually increase the whisking

speed within 15 seconds to max. speed.The

appliance will continue to run at this speed until

the stop button is pressed.The speed can be

decreased up to 3 times by pressing the - button.

Blender

The blender is intended for:

- Blending fluids, e.g. dairy products, sauces, fruit

juices, soups, mixed drinks, sweat teas, shakes.

- Mixing soft ingredients, e.g. pancake batter or

mayonnaise.

- Pureeing cooked ingredients, e.g. for making

baby food.

◗ The appliance can be used with or without the

blender attached to the motor unit. If you use

the appliance without the blender, the appliance

will not function if the screw caphas not been

screwed properly onto the motor unit.

C

1 To attach the blender jar, remove the

screw cap above the panel.

C

2 Mount the blender jar onto the motor unit

by turning it in the direction of the arrow

until it is firmly fixed.The handle must be

facing to the left.

Do not exert too much pressure on the handle

of the blender jar.

3 Put the ingredients in the blender jar.

C

4 Close the lid.

C

5 Always connect the safety cover onto the

blender lid before you start processing.

C

6 Press the blending process button.The

blender will start to operate, the speed

increases to maximum speed and will

continue to run at this speed until the STOP

button is pressed. During the blending

process the speed can be decreased up to

three times by pressing the - button.

1

2

1

2

13ENGLISH

Tips

C

◗ Pour the liquid ingredients into the blender

jar through the hole in the lid.

◗ The longer you let the appliance run, the finer

the blending result will be.

◗ Pre-cut solid ingredients into smaller pieces

before putting them in the blender. If you

want to prepare a large quantity, process small

batches of ingredients instead of trying to

process a large quantity at once.

◗ Hard ingredients e.g. soy beans for soy bean

milk, must be soaked in water before they are

processed.

C

◗ Crush ice cubes by placing the ice cubes in

the jar, close the lid and use the pulse

function.

If ingredients stick to the wall of the blender jar:

1 Switch the appliance off and unplug it.

2 Open the lid.

Never open the lid while the appliance is still

running.

3 Use a spatula to remove the ingredients

from the wall of the jar.

Keep the spatula at a safe distance from the

blades (approx. 2 cm).

◗ If you are not satisfied with the results, let the

appliance run briefly a number of times by

pressing the pulse button.You can also achieve

a better result by stirring the ingredients with

a spatula (not while the blender is running), or

by pouring some of the contents out in order

to process a smaller amount.

◗ In some cases the ingredients are easier to

blend if you add some liquid e.g. lemon juice

when blending fruits.

Citrus press

The citrus press can be used for all kinds of citrus

fruit.

C

1 Put the bowl on the motor unit and place

the sieve on the bowl.

C

2 Turn the sieve in the direction of the

arrow until the peg of the safety lock snaps

home in the motor unit.

C

3 Place the cone on the sieve by pressing it

lightly down.

C

4 Press the 'Citrus pressing button' on the

control panel.

The process speed can be increased up to

3 times by pressing the + button.

1

2

CLICK

1

ENGLISH14

The process starts running and stops if the STOP-

button is pressed.

C

5 Press half of fruit firmly on the rotating

cone.

Tips

◗ Stop pressing from time to time to remove

the pulp from the sieve.

When you do so, switch off the appliance and

remove the bowl along with the sieve and cone.

C

◗ After use, remove the bowl along with the

Citrus press accessories to prevent juice from

leaking onto the appliance.

Juice extractor

The juice extractor can be used for preparing

fresh fruit and vegetable juices. Pulp, pips and skins

will be separated.

1 Put the bowl on the motor unit.

C

2 Put the toolholder in the bowl.

1

2

C

3 Attach the juicer drum on the toolholder.

C

4 Insert the pulp sieve into the juicer drum

and ensure that all 3 pins fit into the

notches of the juicer drum.

C

5 Put the lid of the juice extractor on the

bowl.

C

6 Press the juice extracting button.

Never use the juicing accessory if the rotating

sieve or drum is damaged.

The appliance will start with a slow start and

reaches finally maximum speed.The speed can be

decreased by pressing - button.The appliance will

turn off if the STOP button is pressed.

1

2

ENGLISH 15

C

7 Drop the fruit or vegetables in the juice

extractor through the feed tube.

C

8 Press the ingredients firmly down with the

pusher if necessary. Keep the pusher in the

feed tube as much as possible to avoid

splashing.

9 Let the appliance run for another

20 seconds to obtain any juice still left in

the fruit or vegetables.

C

10 To avoid spilling juice on the appliance,

remove the bowl along with the juice

extractor accessories after use.

Tips

◗ Before you use the juice extractor:

- cut carrots, white radish, etc.

- peel citrus fruits, pineapples, melons, etc.

- stone cherries, plums, apricots, peaches, etc.

◗ Always switch on the appliance before you

put the fruit in the juice extractor.

◗ Switch the appliance off from time to time to

remove pulp from the sieve and the juicer

drum.

◗ Do not process large amounts of food at the

same time.

◗ Switch the appliance off if it starts to vibrate

strongly and clean the pulp sieve and the filter

before you switch the appliance on again.

1

2

Cleaning

Always unplug the appliance before you start

cleaning the motor unit.

1 Clean the motor unit with a damp cloth.

Do not immerse the motor unit in water

and do not rinse it either.

2 Always clean the parts that have come

into contact with food in hot water with

washing-up liquid immediately after use.

◗ The bowl, the lid of the bowl, the pusher and

the accessories (except for the blender jar)

can also be cleaned in a dishwasher.

These parts have been tested for dishwasher

resistance based on DIN EN 12875.

The blender jar is not dishwasherproof!

◗ To remove the lid, open it and then pull it

upwards.

Only remove the lid for cleaning purposes.

Clean the metal blade, the blade unit of the

blender and the inserts very carefully.Their cutting

edges are very sharp!

Make sure that the cutting edges of the blades

and the inserts do not come into contact with

hard objects.This could cause them to become

blunt.

ENGLISH16

Certain ingredients may cause discolourations on

the surface of the accessories.This does not have

a negative effect on the accessories.The

discolourations usually disappear after some time.

C

◗ Wind the (excess) mains cord around the

reel on the back of the appliance.

Blender quick-clean operation

C

1 Pour lukewarm water (not more than

0.5 litres) and some washing-up liquid into

the blender jar.

2 Close the lid.

C

3 Let the appliance run for a few moments

by pressing the pulse button.

(The appliance stops running when you

release the button).

4 Detach the blender jar and rinse it with

clean water.

To clean the balloon beater thoroughly:

C

1 Disassemble the gearwheels from the

balloon beater.

Clean the gearwheels and ballon beater in warm

saopy water or in the dishwasher.

To clean the adjustable slicing disc

thoroughly:

C

1 Turn the adjusting knob to the right to pull

the blade out of the disc.

The disc, the blade and the adjusting knob can be

cleaned in warm soapy water or in the dish-

washer.

Storage

MicroStore

C

◗ Put the accessories (blade, insert holder) on

the tool holder and store them in the bowl.

Always end up with the insert holder.

Guarantee & service

If you need information or if you have a problem,

please visit the Philips Web site at

www.philips.com or contact the Philips

Customer Care Centre in your country (you will

find its phone number in the worldwide

guarantee leaflet). If there is no Customer Care

Centre in your country, turn to your local Philips

dealer or contact the Service Department of

Philips Domestic Appliances and Personal Care BV.

1

2

ENGLISH 17

Solution

Turn the bowl/or lid clockwise until you hear a click.

Make sure that the points on the bowl and on the lid

are placed directly opposite each other.

The automatic thermal cut-out system has probably cut

off the power supply to the appliance because it has

overheated. 1) Unplug the appliance. 2) Press the STOP

button. 3) Let the appliance cool down for 60 minutes.

4) Put the mains plug in the socket. 5) Switch the

appliance on again.

Press the button for the process you want.

This appliance is equipped with a memory-function. If

you restart the appliance within 40 seconds, the process

will start where it was interrupted. If you want the

process to start right from the beginning: 1) Briefly press

another process (e.g. the pulse button) 2) Then press

the STOP button. 3) Press the appropriate process

button to make the process start all over again.

If both the blender and the food-processing bowl have

been mounted correctly, only the blender will function. If

you want to use the food-processing bowl, detach the

blender and close the fixing hole with the screw cap.

The motor is already at its physical limit, i.e. at kneading

or when the speed is at the defined level where it can

not be decreased any further.

Problem

The appliance doesn't

switch on.

The appliance has

suddenly stopped

running.

You have pressed the

wrong process button.

The process doesn't

start at the beginning

after a restart.

Both the blender jar

and the food

processing bowl are

attached, but only the

blender works.

The +/- button does

not react at certain

applications.

Troubleshooting guide

Application times

10 - 60 sec.

60 - 180 sec.

30 - 180 sec.

10 - 60 sec.

depends on the

quantity

depends on the

quantity

Application

Chopping, pureeing, mixing

Shredding, grating

Slicing

Kneading, mixing

Whisking, whipping, emulsifying

Blending, pureeing

Pressing of citrus fruits

Extracting of fruit juices and

vegetable juices

Accessory

P

hjk

¬

{

˚

D

ƒ

©

Function

¥

^

¨

∆

†

“

‘

Functions, appliacations & application times

ENGLISH18

Applications

Salads, raw

vegetables

Salads, raw

vegetables

Pancakes,

waffles

Breadcrumbed

dishes, au

gratin dishes

Deserts,

toppings

Procedure

Cut the vegetables into pieces

that fit into the tube. Fill the

tube with the pieces and slice

them while pressing the pusher

lightly.

Cut the vegetables into pieces

that fit into the tube. Fill the

tube with the pieces and slice

them while pressing the pusher

lightly.

First pour the milk into the

blender and then add the dry

ingredients. Mix the ingredients

for approx. 1 minute. If

necessary, repeat this

procedure 2 times.Then stop

for a few minutes to allow the

appliance to cool down to

ambient temperature.

Use dry, crispy bread.

Use soft butter for a light

result.

Proce

ss

butto

n /

access

ory

^ / k

^ / ¬

† / D

¥ / P

¨ / {

Max.

quanti

ty

500g

750ml

milk

100g

300g

Ingredients &

results

Apples,

carrots,

celeriac -

shredding

Apples,

carrots,

celeriac -

slicing

Batter

(pancake) -

whisking

Bread crumbs

- chopping

Butter cream

(creme au

beurre) -

whisking

Quantities and preparation times

Applications

Garnishing,

soups, sauces,

au gratin

dishes

Sauces, pizzas,

au gratin

dishes, fondues

Garnishing,

sauces, pastry,

puddings,

mousses

Purees, soups

Baby and

infant food

Salads,

garnishing

Bread

Procedure

Use a piece of rindless

Parmesan and cut it into pieces

of approx. 3 x 3 cm.

Cut the cheese into pieces that

fit into the tube. Press carefully

with the pusher.

Use hard, plain chocolate. Break

it into pieces of 2 cm.

Use cooked peas or beans. If

necessary, add some liquid to

improve the consistency of the

mixture.

For a coarse puree, add only a

little liquid. For a fine puree,

keep adding liquid until the

mixture is smooth.

Put the cucumber in the tube

and press it down carefully.

Mix warm water with yeast and

sugar. Add flour, oil and salt and

knead the dough for approx.

90 seconds. Leave to rise for

30 minutes.

Proce

ss

butto

n /

access

ory

¥ / P

^ / h

¥ / P

^ / ¬

¨ / {

Max.

quanti

ty

200g

250g

500g

2

cucum

bers

500g

flour

Ingredients &

results

Cheese

(Parmesan) -

chopping

Cheese

(Gouda) -

shredding

Chocolate -

chopping

Cooked peas,

beans -

pureeing

Cooked

vegetables and

meats -

pureeing

Cucumbers -

slicing

Dough (for

bread) -

kneading

1919ENGLISH

Applications

Pizza

Apple pies,

sweet biscuits,

open fruit flans

Luxury bread

Puddings,

soufflees,

meringues

Procedure

Follow the same procedure as

for bread dough. Knead the

dough for 1 minute. First put in

the flour and then the other

ingredients.

Use cold margarine, cut the

margarine into 2cm cubes. Put

the flour in the bowl and add

the margarine. Mix until the

dough has become crumbly.

Then add cold water while

mixing. Stop as soon as the

dough starts to turn into a ball.

Allow the dough to cool

before further processing.

First mix yeast, warm water

and some sugar in a separate

bowl. Put all ingredients in the

bowl and knead the dough

until it is smooth and does not

stick to the bowl (takes approx.

1 minute). Leave it to rise for

30 minutes.

Use egg whites at room

temperature. Note: use at least

2 egg whites.

Proce

ss

butto

n /

access

ory

¨ / {

∆ / ˚

Max.

quanti

ty

750g

flour

300g

flour

500g

flour

4 egg

whites

Ingredients &

results

Dough (for

pizzas) -

kneading

Dough

(shortcrust

pastry) -

kneading

Dough (yeast)

- kneading

Egg whites -

whisking

Applications

Sauces, jams,

puddings, baby

food

Sauces, jams,

puddings, baby

food

Garnishing,

dips

Sauces, soups,

garnishing,

herb butter

Fruit juices

Salads,

garnishing and

barbecue

sauces

Procedure

Tip: add a little lemon juice to

prevent the fruit from

discolouring. Add some liquid

to obtain a smooth puree.

Tip: add a little lemon juice to

prevent the fruit from

discolouring

Peel the garlic. Press the pulse

button several times to avoid

chopping the garlic too fine.

Use at least 150g.

Wash and dry the herbs before

chopping.

Juice the fruits in the juicer.

All the ingredients must be at

room temperature. Note: use

at least one large egg, two small

eggs or two egg yolks. Put the

egg and a little vinegar in the

bowl and add the oil drop by

drop.

Proce

ss

butto

n /

access

ory

† / D

¥ / P

‘ / ©

∆ / ˚

Max.

quanti

ty

500g

300g

Min.

50g

500g

(total

amou

nt)

3 eggs

Ingredients &

results

Fruit (e.g.

apples,

bananas, water

chestnut) -

blending

Fruit (e.g.

apples,

bananas) -

chopping

Garlic -

chopping

Herbs (e.g.

parsley) -

chopping

Juices (e.g.

made of apple,

carrots etc.)

juicing) -

blending

Mayonnaise -

emulsifying

ENGLISH20

Applications

Steaks tartar,

hamburgers,

meat balls

Steaks tartar,

hamburgers,

meat balls

Milkshakes

Various cakes.

Salads,

puddings, nut

bread, almond

paste

Salad, cooked

food, stir-fries,

garnishing

Procedure

First remove any sinews or

bones. Cut the meat into cubes

of 3cm. Press the pulse button

to get a coarser chopping

result.

First remove any sinews or

bones. Cut the meat into cubes

of 3cm. Press the pulse button

to get a coarser chopping

result.

Puree the fruit (e.g. bananas,

strawberries) with sugar, milk

and some ice cream and mix

well.

The ingredients must be at

room temperature. Mix the

softened butter and the sugar

until the mixture is smooth and

creamy.Then add milk, eggs and

flour.

Use the pulse button for

coarse chopping. Stop the

process if you want a coarse

result.

Peel the onions and cut them

into 4 pieces. Stop the process

after 2 pulses to check the

result.

Proce

ss

butto

n /

access

ory

¥ / P

† / D

¨ / {

¥ / P

Max.

quanti

ty

500g

400g

500ml

milk

4 eggs

250g

500g

Ingredients &

results

Meats (lean) -

mincing

Meats, fish,

poultry

(streaky) -

mincing

Milkshakes -

blending

Mixture (cake)

- mixing

Nuts -

chopping

Onions -

chopping

Applications

Salad, cooked

food, stir-fries,

garnishing

Minced meat

Soups, sauces

Garnishing,

cream, ice-

cream

mixtures

Procedure

Peel the onions and cut them

into pieces that fit into the

tube. Note: use at least 100g.

First remove any sinews or

bones. Cut the meat into cubes

of 3cm. Use the pulse button

for a coarser chopping result.

Use cooked vegetables.

Use cream that comes straight

from the refrigerator. Note: use

at least 125ml cream.The

whipped cream is ready after

approx. 2 minutes.

Proce

ss

butto

n /

access

ory

^ / ¬

¥ / P

† / D

∆ / ˚

Max.

quanti

ty

300g

200g

500ml

Ingredients &

results

Onions -

slicing

Poultry -

mincing

Soups -

blending

Whipping

cream -

whipping

Sayfa yükleniyor...

Philips Essence HR7754 Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Philips Essence HR7754 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler