Yamaha RX-V4600 El kitabı

Kategori
AV alıcıları
Tip
El kitabı
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.
135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.
RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.
YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B.
J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD.
17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
©
2005 All rights reserved.
RX-V4600
Printed in Malaysia WF09610
RX-V4600
AV Receiver
Ampli-tuner audio-vidéo
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
GB
OLYMPUS 0062, 0253
OPTIMUS 0064, 0075, 0131,
0459
ORION 0211, 0375, 0379,
1506
OSAKI 0027, 0064, 0099
OTTO VERSAND 0108
PALLADIUM 0064, 0068, 0099
PANASONIC 0062, 0252, 0253,
0643, 1062, 1589
PATHE MARCONI 0068
PENNEY 0062, 0064, 0069,
0267, 1062, 1264
PENTAX 0069
PERDIO 0027
PHILCO 0062
PHILIPS 0062, 0108, 0645,
1108, 1208
PHONOLA 0108
PILOT 0064
PIONEER 0069, 0094, 0108
POLK AUDIO 0108
PROFITRONIC 0267
PROLINE 0027
PROSCAN 0087, 1087
PROTEC 0099
PULSAR 0066
PYE 0108
QUASAR 0062, 1062
QUELLE 0108
RCA 0062, 0069, 0087,
0267, 0834, 1062,
1087
RADIOSHACK 0027
RADIOLA 0108
RADIX 0064
RANDEX 0064
REALISTIC 0027, 0062, 0064,
0074, 0075, 0131
REOC 0375
REPLAYTV 0641, 0643
REX 0068
ROADSTAR 0064, 0099, 0267,
0305
RUNCO 0066
SBR 0108
SEG 0267
SEI 0108
STS 0069
SABA 0068, 0347
SALORA 0070
SAMPO 0064, 0075
SAMSUNG 0072, 0267, 0459
SANKY 0066, 0075
SANSUI 0027, 0068, 0094,
1506
SANYO 0074, 0131, 0267
SAVILLE 0379
SCHAUB LORENZ 0027, 0068,
0131
SCHNEIDER 0027, 0099, 0108
SCOTT 0070, 0072, 0211
SEARS 0027, 0062, 0064,
0069, 0074, 0131,
1264
SELECO 0068
SEMP 0072
SHARP 0075, 0834
SHINTOM 0099, 0131
SIEMENS 0064, 0108, 0131
SILVA 0064
SINGER 0072, 0099
SINUDYNE 0108
SONIC BLUE 0641, 0643
SONTEC 0064
SONY 0027, 0059, 0060,
0062, 0663, 1259
SUNKAI 0375
SUNSTAR 0027
SUNTRONIC 0027
SYLVANIA 0027, 0062, 0108,
0070, 1808
SYMPHONIC 0027
TMK 0267
TANDY 0027, 0131
TASHIKO 0027, 0064
TATUNG 0027, 0068, 0072,
0094, 0108
TEAC 0027, 0068, 0305,
0334, 0669
TECHNICS 0062, 0253
TECO 0062, 0064, 0068,
0075
TEKNIKA 0027, 0062, 0064
TELEAVIA 0068
TELEFUNKEN 0068, 0347
TENOSAL 0099
TENSAI 0027
THOMAS 0027
THOMSON 0068, 0087, 0094,
0347
THORN 0068, 0131
TIVO 0645, 0663
TOSHIBA 0068, 0070, 0072,
0094, 0108, 0872
TOTEVISION 0064, 0267
UHER 0267
UNITECH 0267
UNIVERSUM 0027, 0064, 0108,
0267
VECTOR 0072
VICTOR 0068, 0094
VIDEO CONCEPTS 0072
VIDEOMAGIC 0064
VIDEOSONIC 0267
VILLAIN 0027
WARDS 0027, 0062, 0069,
0074, 0075, 0087,
0099, 0108, 0267
WHITE WESTINGHOUSE
0099
XR-1000 0027, 0062, 0099
YAMAHA 0068
YAMISHI 0 0 99
YOKAN 0099
YOKO 0267
ZENITH 0027, 0060, 0066,
1506
RX-V4600_GB-cv.fm Page 1 Thursday, April 14, 2005 1:31 PM
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on
the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than
specified.
13 To prevent damage by lightning, disconnect the AC power
cable and disconnect the antenna cable when there is an
electrical storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
17 Before moving this unit, press STANDBY/ON to set this unit
in the standby mode, and disconnect the AC power plug from
the wall outlet.
18 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC main supply. Voltages are:
General model.............AC 110/120/220/230–240 V, 50/60 Hz
Asia model ................................AC 220/230–240 V, 50/60 Hz
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed to
consume a very small quantity of power.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
1
PREPARATIONINTRODUCTION
BASIC
OPERATION
SOUND FIELD
PROGRAMS
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
English
FEATURES............................................................. 2
GETTING STARTED............................................ 3
Supplied accessories .................................................. 3
Installing batteries in the remote controls.................. 4
CONTROLS AND FUNCTIONS ......................... 5
Front panel ................................................................. 5
Remote control........................................................... 7
Zone 2/Zone 3 remote control ................................... 9
Using the remote controls.......................................... 9
Front panel display .................................................. 10
Rear panel ................................................................ 12
SPEAKER SETUP ............................................... 13
Speaker placement ................................................... 13
Speaker connections ................................................ 15
CONNECTIONS .................................................. 18
Before connecting components................................ 18
Connecting video components................................. 19
Connecting audio components................................. 22
Connecting the antennas.......................................... 24
Connecting the power cable..................................... 25
Speaker impedance setting ...................................... 26
Turning on the power............................................... 26
AUTO SETUP....................................................... 27
Introduction.............................................................. 27
Optimizer microphone setup.................................... 27
Starting the setup ..................................................... 28
Confirming the results ............................................. 30
PLAYBACK.......................................................... 33
Basic operations....................................................... 33
Selecting sound field programs ............................... 34
Additional operations............................................... 35
Selecting audio input modes.................................... 40
TUNING ................................................................ 41
Automatic and manual tuning.................................. 41
Presetting stations .................................................... 42
Selecting preset stations........................................... 44
Exchanging preset stations ...................................... 44
Receiving Radio Data System stations.................... 45
Changing the Radio Data System mode .................. 45
PTY SEEK function ................................................ 46
EON function........................................................... 47
RECORDING ....................................................... 48
SOUND FIELD PROGRAM
DESCRIPTIONS .............................................. 49
For movie/video sources.......................................... 49
For music sources .................................................... 51
ADVANCED OPERATIONS ..............................52
Using the sleep timer ............................................... 52
SYSTEM OPTIONS .............................................53
Changing parameter settings ................................... 55
Input Select .............................................................. 56
Manual Setup (Sound) ............................................. 59
Manual Setup (Basic) .............................................. 62
Manual Setup (Option) ............................................ 67
System Memory....................................................... 70
REMOTE CONTROL FEATURES ...................71
Control area ............................................................. 71
Setting remote control codes ................................... 72
Programming codes from other
remote controls (Learn)....................................... 74
Changing source names in the display window....... 76
Using the Macro feature .......................................... 77
Clearing function sets .............................................. 79
Clearing individual functions .................................. 80
Controlling each component.................................... 82
ZONE 2/ZONE 3 ...................................................83
Zone 2/Zone 3 connections...................................... 83
Controlling Zone 2/Zone 3 from the front panel ..... 84
Controlling Zone 2/Zone 3 using
the remote control................................................ 85
FRONT PANEL DISPLAY MENUS ..................87
Advanced setup menu.............................................. 87
Front panel display system options menu................ 88
USING i.LINK.......................................................92
What is i.LINK? ...................................................... 92
Connecting i.LINK components.............................. 92
Basic i.LINK operations .......................................... 93
Changing i.LINK Select parameters........................ 93
i.LINK display messages ......................................... 95
USING HDMI........................................................96
What is HDMI? ....................................................... 96
Connecting HDMI components............................... 97
Basic HDMI operations ........................................... 98
Changing HDMI parameters.................................... 98
EDITING SOUND FIELD PARAMETERS ....100
What is a sound field? ........................................... 100
Changing parameter settings ................................. 100
SOUND FIELD PARAMETER
DESCRIPTIONS.............................................101
TROUBLESHOOTING .....................................106
GLOSSARY.........................................................111
Audio formats ........................................................ 111
Sound field programs............................................. 112
Audio information ................................................. 112
Video signal information ....................................... 114
PARAMETRIC EQUALIZER
INFORMATION .............................................115
SPECIFICATIONS.............................................116
CONTENTS
INTRODUCTION
PREPARATION
BASIC OPERATION
SOUND FIELD PROGRAMS
ADVANCED OPERATION
ADDITIONAL INFORMATION
FEATURES
2
Built-in 7-channel power amplifier
Minimum RMS Output Power
(0.04% THD, 20 Hz to 20 kHz, 8 )
Front: 130 W + 130 W
Center: 130 W
Surround: 130 W + 130 W
Surround Back: 130 W + 130 W
Sound field features
Proprietary YAMAHA technology for the creation of
sound fields
THX Select2
SRS CS (U.S.A. model only)
Dolby Digital/Dolby Digital EX decoder
DTS/DTS-ES Matrix 6.1, Discrete 6.1,
DTS Neo:6 decoder, DTS 96/24
Dolby Pro Logic/Dolby Pro Logic /
Dolby Pro Logic x decoder
Virtual CINEMA DSP
SILENT CINEMA
Sophisticated AM/FM tuner
40-station random access preset tuning
Automatic preset tuning
Preset station shifting capability (preset editing)
HD Radio
digital broadcast receiving capability
(U.S.A. model only)
Radio Data System receiving capability
(U.K. and Europe models only)
Other features
YPAO: YAMAHA Parametric Room Acoustic
Optimizer for automatic speaker setup
192-kHz/24-bit D/A converter
GUI (graphical user interface) menus that allow you to
optimize this unit to suit your individual audio/video
system
GUI display menu language switching capability
(English, Japanese, French and German)
6 or 8-channel additional input jacks for discrete
multi-channel input
Short message function
PURE DIRECT for pure fidelity sound with analog,
DSD, PCM and multi-channel PCM sources
S-video signal input/output capability
Component video input/output capability
Video signal conversion (composite video
S-video component video) capability for monitor
out
i.LINK interface for direct digital transfer of digital
audio signals
HDMI interface for standard, enhanced or
high-definition video as well as multi-channel digital
audio
Optical and coaxial digital audio signal jacks
Sleep timer
Cinema and music night listening mode
Remote control with preset remote control codes and
learning/macro capability
Zone 2/Zone 3 custom installation facility
Zone 2/Zone 3 remote control for controlling
Zone 2/Zone 3 components connected to this unit
y indicates a tip for your operation.
Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button
names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.
This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc.
In case of differences between the manual and product, the product has priority.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Surround EX”, and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of
Digital Theater Systems, Inc.
“HDMI”, the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks or registered trademarks of HDMI
Licensing LLC.
“i.LINK” and the “i.LINK” logo are trademarks of Sony
Corporation.
“SILENT CINEMA” is a trademark of YAMAHA
CORPORATION.
The THX logo is a trademark of THX Ltd. which may be
registered in some jurisdictions. All rights reserved.
FEATURES
GETTING STARTED
3
INTRODUCTION
English
Please check that you received all of the following parts.
GETTING STARTED
Supplied accessories
CLEAR
LEARN
RE–NAME
EXIT
MENU
REC
DISC SKIP
EFFECT
RETURN
DISPLAY
STRAIGHT
BAND
PRG SELECT
A/B/C/D/E
NIGHT
AUDI O
PURE DIRECT
ENTER
TOP
TITLE
SELECT
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
1
2B
THX
STANDARD SELECT EXTD SUR.
STEREO
MUSIC ENTERTAIN MOVIE
VOL
+
3421
90
+10
ENT.
5678
POWER POWER POWER
SYSTEM
STANDBY
AVTV
SLEEP
AUDIO SELECT
A
B
CH
+
TV VOL
TV MUTE TV INPUT
MUTE
+
AMP
SOURCE
TV
MACROONOFF
A
SPEAKERSMEMORY
PRESET
FREQ/TEXT EON MODE PTY SEEK START
TUNER CD CD-R
POWER
STANDBY
DTV
CBL/SAT MD/TAPE
VCR 1
DVR/VCR2
DVD
+
MUTE
DISPLAY
PRG SELECT
A/B/C/D/E
PRESET/CH
VOLUME
ZONE 3ZONE 2
ID2ID1
Remote control
Batteries (4)
(AAA, LR03)
Zone 2/Zone 3
remote control
Batteries (2)
(AAA, R03)
AM loop antenna
(Canada, Asia,
General, China, Korea,
Australia, U.K. and
Europe models)
Optimizer microphone
75-ohm/300-ohm antenna
adapter (U.K. model only)
Speaker terminal
wrench
Power cable
Indoor FM antenna
(Australia, U.K. and
Europe models)
Indoor FM antenna
(U.S.A., Canada, Asia,
General, China and
Korea models)
AM loop antenna
(U.S.A. model)
GETTING STARTED
4
Notes on batteries
Change all of the batteries if you notice conditions such as the operation range of the remote control decreases, the indicator does not
flash, or its light or display window become dim.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these
different types of batteries may have the same shape and color.
We strongly recommend using alkaline batteries.
If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
Remote control
1 Press the part and slide the battery
compartment cover off.
2 Insert four supplied batteries (AAA, LR03)
according to the polarity markings on the
inside of the battery compartment.
3 Slide the cover back until it snaps into place.
Zone 2/Zone 3 remote control
1 Press the part and slide the battery
compartment cover off.
2 Insert two supplied batteries (AAA, R03)
according to the polarity markings (+ and –)
on the inside of the battery compartment.
3 Slide the cover back until it snaps into place.
Installing batteries in the remote controls
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program
any acquired functions that may have been cleared.
1
3
2
1
3
2
CONTROLS AND FUNCTIONS
5
INTRODUCTION
English
1 STANDBY/ON
Turns on the main unit only or sets it to the standby mode.
When you turn on the main unit, there will be a 6 to 7
second delay before the main unit can reproduce sound.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.
You can turn on the main unit, Zone 2 and Zone 3 or set them to
the standby mode simultaneously using the remote control.
For details, see page 86.
2 INPUT selector
Selects the input source you want to listen to or watch.
3 AUDIO SELECT
Toggles the priority for the type of audio input jack
(AUTO, i.LINK, HDMI, COAX/OPT, ANALOG) when
one component is connected to two or more input jacks on
this unit (see page 40).
4 MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with the INPUT selector
(or the input selector buttons on the remote control).
5 A/B/C/D/E
Selects one of the 5 preset station groups (A to E) when
the unit is in the tuner mode (see page 44).
6 PRESET/TUNING l / h
Selects preset station number 1 to 8 when the unit is in the
tuner mode and the colon (:) is displayed next to the band
indication in the front panel display.
Selects the tuning frequency when the unit is in the tuner
mode and the colon (:) is not displayed.
See pages 41 to 44 for details.
7 Front panel display
Shows information about the operational status of this
unit.
8 PRESET/TUNING (EDIT)
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and tuning when
the unit is in the tuner mode (see pages 41 to 44).
9 FM/AM
Switches the reception band (FM or AM) when the unit is
in the tuner mode (see page 41).
0 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory when the unit is in the tuner
mode. Hold down this button for more than 3 seconds to
start automatic preset tuning (see pages 42 to 43).
A TUNING MODE (AUTO/MAN’L)
Switches the tuning mode between automatic (“AUTO”
indicator on) and manual (“AUTO” indicator off) when
the unit is in the tuner mode.
CONTROLS AND FUNCTIONS
Front panel
A
SPEAKERS
B
MULTI CH
INPUT
AUDI O
SELECT
TONE
CONTROL
STRAIGHT
PRESET/
TUNING
EDIT
MAN'L/AUTO FM AUTO/MAN'L EFFECT
TUNING
MODE
MEMORY
MAIN ZONE 2
ZONE ON/OFF
ZONE 3
ZONE CONTROL
FM/AM
A/B/C/D/E
SOURCE/
REMOTE
REC OUT/ZONE 2
SILENT CINEMA S VIDEO VIDEO L
VIDEO/AUX
AUDIO R OPTICAL
PHONES
PRESET/
TUNING
OPTIMIZER
MIC
VOLUME
PROGRAM
INPUT
PURE DIRECT
STANDBY
/ON
MD/TAPEDVD
DTV
CBL/SAT
VCR 1
CD-R
TUNER
CD
DVR/
VCR 2
FI MNLKJHG
1 2 34 5 6 7 890A B D E
C
Notes
CONTROLS AND FUNCTIONS
6
B STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
C Remote control sensor
Receives signals from the remote controls.
D TONE CONTROL
Use to adjust the bass/treble balance for the front left/right
and center channels (see page 35).
E PURE DIRECT
Turns on or off the PURE DIRECT mode. Lights up when
turned on (see page 38).
F REC OUT/ZONE 2
Selects the source you want to direct to the audio/video
recorder and ZONE 2 outputs independently of the source
you are listening to or watching in the main room. When
set to the SOURCE/REMOTE position, the input source is
directed to all outputs. The source in Zone 2 and the
source you record are always identical.
G OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function
(see page 27).
H SPEAKERS A/B
Turn on or off the set of front speakers connected to the
A and/or B terminals on the rear panel each time the
corresponding button is pressed.
I PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output at the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the front left and right channels.
J VIDEO AUX jacks
Input audio and video signals from an external source
such as a game console. To reproduce source signals at
these jacks, select V-AUX as the input source.
K ZONE ON/OFF
MAIN
Turns on the power of the main unit or sets it to the
standby mode (see page 84).
ZONE 2
Turns on the power of Zone 2 or sets it to the standby
mode (see page 84).
ZONE 3
Turns on the power of Zone 3 or sets it to the standby
mode (see page 84).
L ZONE CONTROL
Press to control the input or adjust the volume level for the
currently selected zone (the main unit, Zone 2 or Zone 3)
(see page 84). After you press ZONE CONTROL, the
indicator for the currently selected zone flashes in the
front panel display for approximately 5 seconds. While the
indicator is flashing, perform the desired operation.
M PROGRAM selector
Use to select sound field programs or adjust bass/treble
balance (in conjunction with TONE CONTROL).
N VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
Opening and closing the front panel
door
When you want to use the controls behind the front panel
door, open the door by gently pressing on the lower part of
the panel. Keep the door closed when not using these
controls.
To open, press gently on the lower part of the panel.
CONTROLS AND FUNCTIONS
7
INTRODUCTION
English
This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see “REMOTE CONTROL FEATURES” on
page 71. Set AMP/SOURCE/TV to AMP to operate this
unit.
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Transmission indicator
Flashes while the remote control is sending signals.
3 Input selector buttons
Select the input source and change the control area.
Set AMP/SOURCE/TV to SOURCE, then press TUNER
to select the TUNER mode.
4 Display window
Shows the name of the selected source component that
you can control.
5 LIGHT button
Press to light up remote control buttons and display
window.
6 TOP, BAND
Displays the top screen in the graphical user interface
(GUI) menu on your video monitor when
AMP/SOURCE/TV is set to AMP.
Switches the reception band (FM or AM) when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode.
7 Cursor buttons k / n / l / h / ENTER
Use to select and adjust DSP program parameters or GUI
menu items when AMP/SOURCE/TV is set to AMP.
Press l / h to select a preset station group (A to E) when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode.
Press k / n to select a preset station number (1 to 8) when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode.
8 RETURN
Returns to the upper directory when in the front panel
display menu mode.
9 Sound field program / numeric buttons
Use to select sound field programs or input numbers when
AMP/SOURCE/TV is set to AMP.
Use numbers 1 through 8 to select preset stations when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode.
Use SELECT to play back 2-channel sources in
multi-channel format (see page 37).
Use EXTD SUR. to switch between 5.1 and 6.1/7.1
channel playback of multi-channel software (see page 36).
Remote control
CLEAR
LEARN
RE–NAME
EXIT
MENU
REC
DISC SKIP
EFFECT
RETURN
DISPLAY
STRAIGHT
BAND
A/B/C/D/E
NIGHT
AUDIO
PURE DIRECT
ENTER
TOP
TITLE
SELECT
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
1
2B
THX
STANDARD SELECT EXTD SUR.
STEREO
MUSIC ENTERTAIN MOVIE
VOL
+
3421
90
+10
ENT.
5678
POWER POWER POWER
SYSTEM
STANDBY
AVTV
SLEEP
AUDIO SELECT
A
B
CH
+
TV VOL
TV MUTE TV INPUT
MUTE
+
AMP
SOURCE
TV
MACROONOFF
A
SPEAKERSMEMORY
PRESET
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
t
1
2
3
4
5
6
7
8
9
0
A
B
FREQ/TEXT EON MODE PTY SEEK START
U
CONTROLS AND FUNCTIONS
8
0 MEMORY 1/2
Use to recall favorite sound field programs, YPAO
settings or additional preset stations (see page 70).
A MACRO ON/OFF
Turns the macro function on and off.
B MACRO
Use to program a series of operations for control by a
single button (see page 77).
C STANDBY
Sets this unit in the standby mode.
D SYSTEM POWER
Turns on the power of this unit.
E AUDIO SELECT
Toggles the priority for the type of audio input jack
(AUTO, i.LINK, HDMI, COAX/OPT, ANALOG) when
one component is connected to two or more input jacks on
this unit (see page 40).
F SLEEP
Sets the sleep timer.
G MULTI CH IN
Selects MULTI CH INPUT when using an external
decoder (etc.).
H SELECT k / n
Selects another component that you can control
independently of the input component selected with the
input selector buttons.
I VOL +/
Increases or decreases the volume level.
J AMP/SOURCE/TV
Selects the component you want to control with the
remote control.
AMP: Set to this position to operate this unit.
SOURCE: Set to this position to operate the component
selected with an input selector button.
TV: Set to this position to operate the television.
To set the remote control codes for components, see
page 72.
K MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
L PURE DIRECT
Turns on or off PURE DIRECT mode (see page 38).
M EXIT
Use to exit the graphical user interface (GUI) mode when
AMP/SOURCE/TV is set to AMP.
N NIGHT
Turns on or off the night listening modes (see page 38).
O DISPLAY
Use to enter into the front panel display menu mode when
AMP/SOURCE/TV is set to AMP.
P STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
Q SPEAKERS A/B
Use to turn on or off the set of front speakers connected to
the A and/or B terminals on the rear panel when
AMP/SOURCE/TV is set to AMP, then the corresponding
button is pressed each time.
R RE-NAME
Used to change the input source name in the display
window (see page 76).
S CLEAR
Used to clear functions acquired when using the learn,
macro and rename features, or setting remote control
codes (see page 79).
T LEARN
Used to set up the remote control code or program
functions from other remote controls (see page 74).
U Radio Data System tuning buttons
(U.K. and Europe models only)
These buttons are operative when the unit is in the tuner
mode.
FREQ/TEXT
Press this button when the unit is receiving a Radio Data
System station to cycle the display between the PS mode,
PTY mode, RT mode, CT mode (if the station offers those
Radio Data System data services) and/or the frequency
display (see page 45).
PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode
(see page 46).
PTY SEEK START
Press this button to begin searching for a station after the
desired program type has been selected in the PTY SEEK
mode (see page 46).
EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically (see
page 47).
CONTROLS AND FUNCTIONS
9
INTRODUCTION
English
This section describes the controls and functions of the
Zone 2/Zone 3 remote control. Use the Zone 2/Zone 3
remote control to control components connected to this
unit in Zone 2 (the second room) or Zone 3 (the third
room).
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 POWER
Turns on the power of this unit.
3 STANDBY
Sets this unit in the standby mode.
4 Input selector buttons
Select the input source and change the control area.
5 PRESET/CH k / n
Press k / n to select a preset station number (1 to 8) when
the unit is in tuner mode.
6 VOLUME +/
Increases or decreases the volume level.
7 MUTE
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
8 A/B/C/D/E
Press repeatedly to select a preset station group (A to E)
when the unit is in tuner mode.
9 ID1/ID2
Slide to set the remote control AMP/tuner ID for this unit
(see page 73).
0 ZONE 2/ZONE 3
Slide to set the operation of this unit to Zone 2 or Zone 3
(see page 83).
The remote controls transmit a directional infrared ray.
Be sure to aim the remote controls directly at the remote
control sensor on the main unit during operation.
Handling the remote controls
Do not spill water or other liquids on the remote
controls.
Do not drop the remote controls.
Do not leave or store the remote controls in the
following types of conditions:
places of high humidity, such as near a bath
places of high temperatures, such as near a heater or
stove
extremely low temperatures
dusty places
Zone 2/Zone 3 remote control
TUNER CD CD-R
POWER
STANDBY
DTV
CBL/SAT MD/TAPE
VCR 1
DVR/VCR2
DVD
+
MUTE
DISPLAY
PRG SELECT
A/B/C/D/E
PRESET/CH
VOLUME
ZONE 3ZONE 2
ID2ID1
1
2
3
4
5
6
7
9
0
8
Using the remote controls
A
SPEAKERS
B
MULTI CH
INPUT
AUDIO
SELECT
TONE
CONTROL
STRAIGHT
PRESET/
TUNING
EDIT
MAN'L/AUTO FM AUTO/MAN'L EFFECT
TUNING
MODE
MEMORY
MAIN ZONE 2
ZONE ON/OFF
ZONE 3
ZONE CONTROL
FM/AM
A/B/C/D/E
SOURCE/
REMOTE
REC OUT/ZONE 2
SILENT CINEMA S VIDEO VIDEO L
VIDEO/AUX
AUDIO R OPTICAL
PHONES
PRESET/
TUNING
OPTIMIZER
MIC
VOLUME
PROGRAM
INPUT
PURE DIRECT
STANDBY
/ON
MD/TAPEDVD
DTV
CBL/SAT
VCR 1
CD-R
TUNER
CD
DVR/
VCR2
30 30
TUNER CD CD-R
POWER
STANDBY
DTV
CBL/SATMD/TAPE
VCR 1
DVR/VCR2
DVD
+
MUTE
DISPLAY
PRG SELECT
A/B/C/D/E
PRESET/CH
VOLUME
ZONE 3ZONE 2
ID2ID1
CLEAR
LEARN
RE–NAME
EXIT
MENU
REC
DISC SKIP
EFFECT
RETURN
DISPLAY
STRAIGHT
BAND
PRG SELECT
A/B/C/D/E
NIGHT
AUDIO
PURE DIRECT
ENTER
TOP
TITLE
SELECT
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
1
2B
THX
STANDARD SELECT EXTD SUR.
STEREO
MUSIC ENTERTAIN MOVIE
VOL
+
3421
90
+10
ENT.
5678
POWER POWER POWER
SYSTEM
STANDBY
AVTV
SLEEP
AUDIO SELECT
A
B
CH
+
TV VOL
TV MUTE TV INPUT
MUTE
+
AMP
SOURCE
TV
MACROONOFF
A
SPEAKERSMEMORY
PRESET
FREQ/TEXT EON MODE PTY SEEK START
Approximately 6 m
CONTROLS AND FUNCTIONS
10
1 i.LINK indicator
Lights up when an i.LINK component is connected, and
this unit is playing back signals input via i.LINK
connections.
Flashes when an i.LINK component is connected, but this
unit is playing back signals input via connections other
than i.LINK or no signals are being input via i.LINK
connections.
Turns off when no i.LINK component is connected.
See page 95 for details.
2 HDMI indicator
Lights up when an HDMI component is connected, and
this unit is playing back audio signals input via HDMI
connections.
Flashes when an HDMI component is connected, but this
unit is playing back audio signals input via connections
other than HDMI or no audio signals are being input via
HDMI connections.
Turns off when no HDMI component is connected.
See page 97 for details.
3 NIGHT indicator
Lights up when you select night listening mode.
4 VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active
(see page 39).
5 Sound field indicators
Light to indicate the active DSP sound fields.
6 Input source indicators
A cursor lights to show the current input source.
7 CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field
program.
8 YPAO indicator
Lights up during the auto setup procedure and when the
auto setup speaker settings are used without any
modifications.
9 AUTO indicator
Lights up when this unit is in the automatic tuning mode.
0 STEREO indicator
Lights up when this unit is receiving a stereo signal for an
FM stereo broadcast while the AUTO indicator is lit.
A VOLUME level indicator
Indicates the volume level.
B Decoder indicators
When any of this unit’s decoders function, the respective
indicator lights up.
C DSD indicator
Lights up when this unit is reproducing DSD (direct
stream digital) digital audio signals.
D PCM indicator
Lights up when this unit is reproducing PCM (pulse code
modulation) digital audio signals.
Front panel display
96
24
MUTE
VOLUME
MATRIX
DISCRETE
STANDARD
NIGHT
VIRTUAL
SLEEP
ZONE3
ZONE2
CINEMA
SILENT
HiFi DSP
PTY
HOLD
MEMORY
TUNED
YPAO
PS PTY RT CT EON
AUTO
STEREO
HD
A B
SP
LFE
dB
mS
ft
96/24
LL C R
SL SB SR
MULTI CH
V-AUX
DVR/VCR2
VCR 1
CBL/SAT
DTV DVD
MD/TAPE
CD-R
CD TUNER
PHONO
dB
DIGITAL
PL
PCM
DSD
THX
PL
EX
PL x
CS
13 4 5 6 78 90 A
BCDEGHIJK L M OPQRS
t
2
F
N
U
(U.K. and Europe models)
Presence DSP sound field
Listening position
Left surround
DSP sound field
Right surround
DSP sound field
Surround/surround back DSP sound field
CONTROLS AND FUNCTIONS
11
INTRODUCTION
English
E SLEEP indicator
Lights up while the sleep timer is on.
F ZONE 2/ZONE 3 indicators
Light up when Zone 2 or Zone 3 power is on.
G THX indicator
Lights up when a THX program is selected.
H STANDARD indicator
Lights up when a decoder is selected (see page 37).
I Headphones indicator
Lights up when headphones are connected.
J SP A B indicators
Light up according to the set of front speakers selected.
Both indicators light up when both sets of speakers are
selected, or when bi-wiring.
K SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 36).
L Multi-information display
Shows the current sound field program name and other
information when adjusting or changing settings.
M HiFi DSP indicator
Lights up when you select a HiFi DSP sound field
program.
N Radio Data System indicators
(U.K. and Europe models only)
The name(s) of the Radio Data System data offered by the
currently received Radio Data System station light(s) up.
EON lights up when an Radio Data System station that
offers the EON data service is being received.
PTY HOLD lights up while searching for stations in the
PTY SEEK mode.
O MEMORY indicator
Flashes to show a station can be stored.
P TUNED indicator
Lights up when this unit is tuned into a station.
Q MUTE indicator
Flashes while the MUTE function is on.
R 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit.
S LFE indicator
Lights up when the input signal contains an LFE signal.
T Input channel indicators
Indicate the channel components of current digital input
signal.
U Presence and surround back speaker
indicators
Indicate the connection of presence and/or surround back
speakers when using the Auto Setup setting (page 27) or
Speaker Level setting (page 66).
CONTROLS AND FUNCTIONS
12
1 DIGITAL OUTPUT jacks
See page 22 for details.
2 i.LINK connectors
See page 92 for connection information.
3 Antenna terminals
See page 24 for connection information.
4 Video component jacks
See pages 19 and 21 for connection information.
5 Audio component jacks
See page 22 for connection information.
6 Speaker terminal wrench hook
Use to store the speaker terminal wrench when not in use.
7 RS-232C terminal
This is a control expansion terminal for factory use only.
Consult you dealer for details.
8 REMOTE 1/2 IN/OUT jacks
See page 83 for details.
9 CONTROL OUT jacks
These are control expansion terminals for factory use only.
0 AC OUTLET(S)
Use to supply power to your other A/V components
(see page 25).
A AC INLET
Use this inlet to plug in the supplied power cable
(see page 25).
B DIGITAL INPUT jacks
See pages 19, 21 and 22 for details.
C HDMI IN/OUT connectors
See page 96 for connection information.
D ZONE 2/ZONE 3 OUTPUT jacks
See page 83 for details.
E MULTI CH INPUT jacks
See page 20 for connection information.
F PRE OUT jacks
See page 23 for connection information.
G Speaker terminals
See page 15 for connection information.
H PRESENCE/ZONE 2 speaker terminals
See page 15 for connection information.
VOLTAGE SELECTOR
(Asia and General models only)
See page 25.
Rear panel
GND
SPEAKERS
FRONT
SURROUND
FRONT
CENTER
PRE OUT
SUBWOOFER
SURROUND BACK/PRESENCE
SURROUND
CLASS 2 WIRING
SPEAKER IMPEDANCE
SURROUND BACK SINGLE
CENTER
SINGLE
(SB)
R
L
R
R
R
L
L
L
R
L
R
L
R
L
R
L
R
L
MONITOR
OUT
AUDIOVIDEO
S VIDEO
DVD
DTV
CBL/
SAT
VIDEO
IN
OUT
OUT
DVR/VCR 2
VCR 1
ZONE 2
IN
CENTERSUBWOOFER
MULTI CH INPUT
OUTPUT
AUDIO
(
PLAY
)
IN
(
PLAY
)
IN
OUT
(REC)
OUT
(REC)
CD-R
MD/TAPE
CD
PHONO
SURROUND
TUNER
HDMI
(AUDIO)
S400
IN 1
IN 2
OUT
75
UNBAL.
AM
ANT
GND
FM ANT
DIGITAL OUTPUT
DIGITAL INPUT
OPTICAL
MD/TAPE
CD-R
DVD
DTV
CBL/SAT
CD
CD
DVD
COAXIAL
+
+
+
+
+
+
+
+
+
+
A
B
RS-232C
DVR/VCR 2
CONTROL OUTREMOTE
IN IN OUT
21
OUT
1
2
COMPONENT VIDEO
PR
MONITOR
OUT
PBY
DVD
DTV
CBL/
SAT
+12V 15mA MAX.
PRESENCE/ZONE 2
ZONE 3
FRONT(6CH)/SB(8CH)
AC OUTLETS
SWITCHED
AC IN
12 3 4 5 67 8 9 0 A
BC D E F G H
(Europe model)
SPEAKER SETUP
13
PREPARATION
English
+
The speaker layout below shows the standard ITU-R
*
speaker setting. You can use it to enjoy CINEMA DSP,
multi-channel audio sources and THX.
*
ITU-R is the radio communication sector of the ITU
(International Telecommunication Union).
Front speakers (FR and FL)
The front speakers are used for the main source sound plus
effect sounds. Place these speakers an equal distance from
the ideal listening position. The distance of each speaker
from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it. Best results,
however, are obtained with the full system. Align the front
face of the center speaker with the front face of your video
monitor. Place the speaker centrally between the front
speakers and as close to the monitor as possible, such as
directly over or under it.
Surround speakers (SR and SL)
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m above the
floor.
Surround back speakers (SBR and SBL)
The surround back speakers supplement the surround
speakers and provide for more realistic front-to-back
transitions. Place these speakers directly behind the
listening position and at the same height as the surround
speakers. They should be positioned at least 30 cm apart.
Ideally, they should be positioned at the same width as the
front speakers.
Subwoofer
The use of a subwoofer, such as the YAMAHA Active
Servo Processing Subwoofer System, is effective not only
for reinforcing bass frequencies from any or all channels,
but also for high fidelity reproduction of the LFE (low-
frequency effect) channel included in Dolby Digital and
DTS software. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of the
room to reduce wall reflections.
Presence speakers (PR and PL)
Presence speakers supplement the sound from the front
speakers with extra ambient effects produced by CINEMA
DSP (see page 49). These effects include sounds that
filmmakers intend to locate a little farther back behind the
screen in order to create more theater-like ambience. Place
these speakers at the front of the room about 0.5 – 1 m
outside the front speakers, facing slightly inwards, and
about 1.8 m above the floor.
Surround back and presence speakers do not output sound
simultaneously. You can set to prioritize either set of speakers in
the Sound menu (see page 62).
SPEAKER SETUP
Speaker placement
More than 30 cm
60˚
30˚
PL
PR
SBR
SBL
FL
FR
C
SL
SR
SR
80˚
SL
1.8 m
1.8 m
Note
14
SPEAKER SETUP
Di-pole speaker layout
Either di-pole or direct radiating speaker types can be used
for THX surround. If you choose di-pole speakers, please
place the surround and surround back speakers according
to the speaker layout below.
FL
SR
SL
FR
C
SBR
SBL
: Di-pole speaker
: Direction of the di-pole speaker phase
15
SPEAKER SETUP
PREPARATION
English
Be sure to connect the left channel (L), right channel (R),
“+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
If you will use 6 ohm speakers, be sure to set
this unit’s speaker impedance setting to
6 ohms before using (see page 26). If you will
use 8 ohm speakers, use this unit’s initial
setting for speaker impedance.
Before connecting the speakers, make sure that this
unit is disconnected from the power source.
Do not let the bare speaker wires touch each other or
do not let them touch any metal part of this unit. This
could damage this unit and/or speakers.
Use magnetically shielded speakers. If this type of
speaker still creates interference with the monitor,
place the speakers away from the monitor.
A speaker cord is actually a pair of insulated cables
running side by side. One cable is colored or shaped
differently, perhaps with a stripe, groove or ridges.
Connect the striped (grooved, etc.) cable to the “+” (red)
terminals on this unit and your speaker. Connect the plain
cable to the “–” (black) terminals.
1 Remove approximately 10 mm of insulation
from each of the speaker cables.
2 Twist the exposed wires of the cable together
to prevent short circuits.
3 Loosen the knob.
The supplied speaker terminal wrench is useful for
loosening or tightening knobs.
4 Insert one bare wire into the hole in the side
of each terminal.
5 Tighten the knob to secure the wire.
Connecting to PRESENCE/ZONE 2
speaker terminals
1 Open the tab.
2 Insert one bare wire into the hole of each
terminal.
3 Return the tab to secure the wire.
Banana plug connections
(With the exception of U.K., Europe and Asia models)
First, tighten the knob and then insert the banana plug
connector into the end of the corresponding terminal.
y
You can also use banana plugs with the PRESENCE/ZONE 2
speaker terminals. Open the tab, then insert one banana plug
connector into the hole of each terminal. Do not attempt to close
the tabs after connecting the banana plugs.
Speaker connections
CAUTION
10 mm
1
2
Red: positive (+)
Black: negative (–)
5
4
3
Speaker terminal wrench
2
1
3
Banana plug
(With the exception of U.K., Europe
and Asia models)
16
SPEAKER SETUP
SPEAKERS
FRONT
SURROUND
FRONT
CENTER
PRE OUT
SUBWOOFER
SURROUND BACK/PRESENCE
SURROUND
CLASS 2 WIRING
SPEAKER IMPEDANCE
SURROUND BACK SINGLE
CENTER
SINGLE
(SB)
R
L
R
R
L
L
R
L
R
L
R
L
R
L
+
+
+
+
+
+
+
+
+
+
A
B
PRESENCE/ZONE 2
2 31
7 8 65 109
4
Center
speaker
Front speakers (A)
Surround back speakers
LeftRight
LeftRight LeftRight
Surround speakers
Front
speakers
(B)
1
2
3
4
5
6
9
10
8
7
Speaker layout
LeftRight
Presence speakers
You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously. You can set
to prioritize either set of speakers in the Sound menu (see page 62).
The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only
operate when the Dolby Digital EX, DTS-ES, Dolby Pro Logic x, THX Select2, THX Music, THX Games, or
THX Surround EX modes are turned on.
The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields
are selected.
Subwoofer with
built-in amplifier
17
SPEAKER SETUP
PREPARATION
English
FRONT terminals
Connect one or two speaker systems to these terminals.
If you use only one speaker system, connect it to either of
the FRONT A or B terminals.
The Canada model cannot output to two separate speaker systems
simultaneously.
Bi-wired connection
The unit also allows you to make bi-wired connections to
one speaker system. Use two pairs of speaker cables for
each speaker (one pair for the woofer and one pair for the
tweeter/mid-range). To use the bi-wired connections, press
SPEAKERS A and SPEAKERS B on the front panel so
that both SP A and B light up on the front panel display.
CENTER terminals
Connect a center speaker to these terminals.
SURROUND terminals
Connect surround speakers to these terminals.
SUBWOOFER jack
Connect a subwoofer with a built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
SURROUND BACK terminals
Connect surround back speakers to these terminals.
If you only connect one surround back speaker, connect it
to the left (L) terminals.
PRESENCE terminals
Connect presence speakers to these terminals.
You can also use these terminals to connect Zone 2 speakers
(see page 84).
Note
Note
Bi-wired connection
FRONT
R
L
+
+
+
+
A
B
This unit
CONNECTIONS
18
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
Cable indications
Analog jacks
You can input analog signals from audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right jacks and white plugs
to the left jacks.
Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
signals input at the COAXIAL jack. All digital input jacks
are compatible with 96-kHz sampling digital signals.
This unit handles digital and analog signals independently. Thus
audio signals input at the analog jacks are only output at the
analog OUT (REC) jacks. Likewise audio signals input at the
digital (OPTICAL or COAXIAL) jacks are only output at the
DIGITAL OUTPUT jacks.
Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input at the S VIDEO jacks on this unit are
automatically converted for output at the VIDEO jacks.
When
Video Conv.is set toOn (see page 67), signals
input at the VIDEO jacks can be output at the S VIDEO
and COMPONENT VIDEO jacks. Likewise, signals input
at the S VIDEO jacks can also be output at the
COMPONENT VIDEO jacks.
VIDEO jack
For conventional composite video signals.
S VIDEO jack
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (P
B, PR) to provide the best quality in
picture reproduction.
When signals are input at both the S VIDEO and VIDEO jacks,
signals input at the S VIDEO jack have priority.
CONNECTIONS
Before connecting components
Note
CAUTION
S
V
O
V
V
V
L
R
C
left analog cables
right analog cables
optical cables
coaxial cables
video cables
S-video cables
For analog signals
For digital signals
For video signals
Note
VIDEO
S VIDEO
COMPONENT VIDEO
P
R
P
B
Y
S VIDEO
VIDEO
COMPONENT
VIDEO
Signal flow inside this unit
Only when “Video Conv.” is set to “On”
(see page 67)
Output
(MONITOR OUT)
Input
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570
  • Page 571 571
  • Page 572 572
  • Page 573 573
  • Page 574 574
  • Page 575 575
  • Page 576 576
  • Page 577 577
  • Page 578 578
  • Page 579 579
  • Page 580 580
  • Page 581 581
  • Page 582 582
  • Page 583 583
  • Page 584 584
  • Page 585 585
  • Page 586 586
  • Page 587 587
  • Page 588 588
  • Page 589 589
  • Page 590 590
  • Page 591 591
  • Page 592 592
  • Page 593 593
  • Page 594 594
  • Page 595 595
  • Page 596 596
  • Page 597 597
  • Page 598 598
  • Page 599 599
  • Page 600 600
  • Page 601 601
  • Page 602 602
  • Page 603 603
  • Page 604 604
  • Page 605 605
  • Page 606 606
  • Page 607 607
  • Page 608 608
  • Page 609 609
  • Page 610 610
  • Page 611 611
  • Page 612 612
  • Page 613 613
  • Page 614 614
  • Page 615 615
  • Page 616 616
  • Page 617 617
  • Page 618 618
  • Page 619 619
  • Page 620 620
  • Page 621 621
  • Page 622 622
  • Page 623 623
  • Page 624 624
  • Page 625 625
  • Page 626 626
  • Page 627 627
  • Page 628 628
  • Page 629 629
  • Page 630 630
  • Page 631 631
  • Page 632 632
  • Page 633 633
  • Page 634 634
  • Page 635 635
  • Page 636 636
  • Page 637 637
  • Page 638 638
  • Page 639 639
  • Page 640 640
  • Page 641 641
  • Page 642 642
  • Page 643 643
  • Page 644 644
  • Page 645 645
  • Page 646 646
  • Page 647 647
  • Page 648 648
  • Page 649 649
  • Page 650 650
  • Page 651 651
  • Page 652 652
  • Page 653 653
  • Page 654 654
  • Page 655 655
  • Page 656 656
  • Page 657 657
  • Page 658 658
  • Page 659 659
  • Page 660 660
  • Page 661 661
  • Page 662 662
  • Page 663 663
  • Page 664 664
  • Page 665 665
  • Page 666 666
  • Page 667 667
  • Page 668 668
  • Page 669 669
  • Page 670 670
  • Page 671 671
  • Page 672 672
  • Page 673 673
  • Page 674 674
  • Page 675 675
  • Page 676 676
  • Page 677 677
  • Page 678 678
  • Page 679 679
  • Page 680 680
  • Page 681 681
  • Page 682 682
  • Page 683 683
  • Page 684 684
  • Page 685 685
  • Page 686 686
  • Page 687 687
  • Page 688 688
  • Page 689 689
  • Page 690 690
  • Page 691 691
  • Page 692 692
  • Page 693 693
  • Page 694 694
  • Page 695 695
  • Page 696 696
  • Page 697 697
  • Page 698 698
  • Page 699 699
  • Page 700 700
  • Page 701 701
  • Page 702 702
  • Page 703 703
  • Page 704 704
  • Page 705 705
  • Page 706 706
  • Page 707 707
  • Page 708 708
  • Page 709 709
  • Page 710 710
  • Page 711 711
  • Page 712 712
  • Page 713 713
  • Page 714 714
  • Page 715 715
  • Page 716 716
  • Page 717 717
  • Page 718 718
  • Page 719 719
  • Page 720 720
  • Page 721 721
  • Page 722 722
  • Page 723 723
  • Page 724 724
  • Page 725 725
  • Page 726 726
  • Page 727 727
  • Page 728 728
  • Page 729 729
  • Page 730 730
  • Page 731 731
  • Page 732 732
  • Page 733 733
  • Page 734 734
  • Page 735 735
  • Page 736 736
  • Page 737 737
  • Page 738 738
  • Page 739 739
  • Page 740 740
  • Page 741 741
  • Page 742 742
  • Page 743 743
  • Page 744 744
  • Page 745 745
  • Page 746 746
  • Page 747 747
  • Page 748 748
  • Page 749 749
  • Page 750 750
  • Page 751 751
  • Page 752 752
  • Page 753 753
  • Page 754 754
  • Page 755 755
  • Page 756 756
  • Page 757 757
  • Page 758 758
  • Page 759 759
  • Page 760 760
  • Page 761 761
  • Page 762 762
  • Page 763 763
  • Page 764 764
  • Page 765 765
  • Page 766 766
  • Page 767 767
  • Page 768 768
  • Page 769 769
  • Page 770 770
  • Page 771 771
  • Page 772 772
  • Page 773 773
  • Page 774 774
  • Page 775 775
  • Page 776 776
  • Page 777 777
  • Page 778 778
  • Page 779 779
  • Page 780 780
  • Page 781 781
  • Page 782 782
  • Page 783 783
  • Page 784 784
  • Page 785 785
  • Page 786 786
  • Page 787 787
  • Page 788 788
  • Page 789 789
  • Page 790 790
  • Page 791 791
  • Page 792 792
  • Page 793 793
  • Page 794 794
  • Page 795 795
  • Page 796 796
  • Page 797 797
  • Page 798 798
  • Page 799 799
  • Page 800 800
  • Page 801 801
  • Page 802 802
  • Page 803 803
  • Page 804 804
  • Page 805 805
  • Page 806 806
  • Page 807 807
  • Page 808 808
  • Page 809 809
  • Page 810 810
  • Page 811 811
  • Page 812 812
  • Page 813 813
  • Page 814 814
  • Page 815 815
  • Page 816 816
  • Page 817 817
  • Page 818 818
  • Page 819 819
  • Page 820 820
  • Page 821 821
  • Page 822 822
  • Page 823 823
  • Page 824 824
  • Page 825 825
  • Page 826 826
  • Page 827 827
  • Page 828 828
  • Page 829 829
  • Page 830 830
  • Page 831 831
  • Page 832 832
  • Page 833 833
  • Page 834 834
  • Page 835 835
  • Page 836 836
  • Page 837 837
  • Page 838 838
  • Page 839 839
  • Page 840 840
  • Page 841 841

Yamaha RX-V4600 El kitabı

Kategori
AV alıcıları
Tip
El kitabı