Hoover HOZP7876B Kullanım kılavuzu

Tip
Kullanım kılavuzu
USER INSTRUCTIONS
OVENS
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
MANUALE D’ISTRUZIONI
FORNO
INSTRUCCIONES DE USO
HORNOS EMPOTRABLES
BEDIENUNGSANLEITUNG
BACKOFEN
KULLANIM KILAVUZU
FIRINLAR
POKYNY PRO UŽIVATELE
TROUBY
• HOZP7176B
• HOZP7876B
• HOZP7976B WIFI
BEDIENUNGSANLEITUNG
BACKOFEN
RÚRA NA PEČENIE
NÁVOD NA POUŽITIE
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
GEBRUIKSAANWIJZING
OVEN
EN
FR
02
17
IT
ES
33
48
DE
64
TR
CZ
80
98
SL
SK
114
130
NL
146
FORNOS
MANUAL DE INSTRUÇÕES DE UTILIZAÇÃO
PT
162
Safety Indications
EN 02
During cooking, moisture may condense inside the oven cavity or on the
glass of the door. This is a normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before putting food inside the
oven. In any case, the condensation disappears when the oven reaches
the cooking temperature.
Cook the vegetables in a container with a lid instead of an open tray.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
• WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
WARNING: the accessible parts can become hot when the oven is in
use. Children must be kept at a safe distance.
WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.
WARNING: before initiating the automatic cleaning cycle:
- Clean the oven door;
- Remove large or coarse food residues from the inside of the oven using a
damp sponge. Do not use detergents;
- Remove all accessories and the sliding rack kit (where present);
- Do not place tea towels
In ovens with meat probe it is necessary, before making the cleaning
cycle, close the hole with the nut provided. Always close the hole with the
nut when the meat probe is not used.
• Children under 8 must be kept at a safe distance from the appliance if
not continuously supervised.
Children must not play with the appliance. The appliance can be used by
those aged 8 or over and by those with limited physical, sensorial or
mental capacities, without experience or knowledge of the product, only
if supervised or provided with instruction as to the operation of the
appliance, in a safe way with awareness of the possible risks.
• Cleaning and maintenance should not be carried out by unsupervised
children.
Do not use rough or abrasive materials or sharp metal scrapers to clean
the oven door glasses, as they can scratch the surface and cause the glass
to shatter.
The oven must be switched off before removing the removable parts
and, after cleaning, reassemble them according the instructions.
Only use the meat probe recommended for this oven.
EN 03
Do not use a steam cleaner for cleaning operations.
Connect a plug to the supply cable that is able to bear the voltage, current
and load indicated on the tag and having the earth contact. The socket
must be suitable for the load indicated on the tag and must be having the
earth contact connected and in operation. The earth conductor is yellow-
green in colour. This operation should be carried out by a suitably qualified
professional. In case of incompatibility between the socket and the
appliance plug, ask a qualified electrician to substitute the socket with
another suitable type. The plug and the socket must be conformed to the
current norms of the installation country. Connection to the power source
can also be made by placing an omnipolar breaker between the appliance
and the power source that can bear the maximum connected load and that
is in line with current legislation. The yellow-green earth cable should not
be interrupted by the breaker. The socket or omnipolar breaker used for
the connection should be easily accessible when the appliance is installed.
The disconnection may be achieved by having the plug accessible or by
incorporating a switch in the fixed wiring in accordance with the wiring
rules.
If the power cable is damaged, it must be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.
The type of power cable must be H05V2V2-F.
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
Any excess of spilled material should be removed before cleaning.
• During the pyrolytic cleaning process, surfaces can heat up more than
usual, children must therefore be kept at a safe distance.
The appliance must not be installed behind a decorative door in order to
avoid overheating.
When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity.
The shelf must be inserted completely into the cavity
• WARNING: Do not line the oven walls with aluminum foil or single-use
protection available from stores. Aluminum foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
WARNING: Never remove the oven door seal.
No additional operation/setting is required in order to operate the appliance
at the rated frequencies.
General Instructions
5
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
7
3.1 Display description
3.2 Cooking modes
Use of the Oven
8
4.1 General notes on cleaning
4.2 Pyrolysis
4.3 Maintenance
• Removal and cleaning of grills
• Removal of the oven window
• Removal and cleaning of the glass
door
• Changing the bulb
Oven Cleaning and Maintenance
13
5.1 F.A.Q.
Troubleshooting
16
Summary
EN 04
1. General Instructions
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you have purchased.
1.1 Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsible for any damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some fundamental rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.
1.2 Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correct supply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is
connected to the electrical supply, it is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
EN 05
1.3 Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
we advise you only use dishes and baking moulds resistant to very high temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last page according to the type of fitting.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The
power cable must only be substituted by technical service staff or by technicians with equivalent
qualifications.
1.5 Waste management and environmental protection
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergo specific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a few basic rules:
- the WEEE should not be treated as domestic waste;
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reduced tariff time slot.
1.6 Declaration of compliance
The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC
Directive 89/109.
By placing the mark on this product, we are confirming compliance to all relevant European safety,
health and environmental requirements which are applicable in legislation for this product.
EN 06
2. Product Description
2.1 Overview
1
2
3
5
4
6
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
2.2 Accessories (according to the model)
Drip pan
1
Collects the residues that drip during the cooking
of foods on the grills.
EN 07
Metal grill
2
Holds baking trays and plates.
Lateral wire grid if included.
3
Lateral wire grids
Led vision
4
Is an illumination system which replaces the
traditional « light bulb ». 14 LED (for non-pyrolitic
versions) or 10 High Power LED (for pyrolitic
versions) lights are integrated within the door.
These produce white high quality illumination
which enables to view the inside of the oven with
clarity without any shadows on all the shelves.
Advantages:
This system, besides providing excellent illumination
inside the oven, lasts longer than the traditional light
bulb its easier and to maintain and most of all saves
energy.
-Optimum view
-Long life illumination
-Very low energy consumption, -95% in
comparison with the traditional illumination High.
Measures the internal temperature of food during
cooking. Insert the meat-probe into the hole on
the top of the cavity.
Prepare the food and properly insert the meat
probe into the food. Do not preheat or start
cooking before properly inserting the meat probe.
Probe should be inserted into the food and
receptacle while the oven is still cool.
Do not insert the meat probe in the frozen food.
Do not leave the meat probe inside the oven when
it's not used: it could damage.
5
Meat-probe (depends on the oven model)
No pre-heating is required for rotisserie cooking.
Cooking with the door closed. The energy
consumption is 90-95% less than traditional
system. When the oven is in use, any unused
accessories should be removed from the oven.
•Unscrew the hooks
•Put the spit into the meat
•Fix the meat with the hooks
•Tighten the screws
•Insert the spit into the motor hole
•Demount the handle before to start cooking.
Turnspit
6
2.3 First Use
PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
3. Use of the Oven
3.1 Display description
Cooking
duration
Cooking
end Timer
Clock
set
Child
lock
WiFi
ON / OFF
EXTRA
The oven is switched on and off with this button.
If the oven is switched off, the display shows the clock. When
the oven is inactive, all the functions are available except the
cooking duration and end of cooking.
If the clock is not set, the oven does not work: the display
flashes, showing "12:00" and the only functioning key is
Extra. From the Extra key, the following functions can be set:
EN 08
NB: can only be set with an
active cooking programme.
Press EXTRA twice and set
the time using the “+” and
“- keys, confirming by
pressing "SELECT".
The display shows “00:00”
if no cooking duration has
been inserted, otherwise
the display shows the time
remaining.
When a cooking programme
ter m in ate s , the o ve n
switches off while the
display shows "END" (the
cooking programme icon
remains on) until the On/Off
button, the only functioning
key, is pressed. When a
c o o k i n g p r o g ra m m e
terminates, an alarm will
sound.
When the cooking time has
f i n i s h e d , t h e o v e n
automatically switches off and
the alarm sounds for a few
seconds.
FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED
END OF
COOKING
COOKING
DURATION
SETTING
THE CLOCK
TIMER
HOW TO USE
NB: can only be set with an
active cooking programme.
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
The cooking duration is
automatically calculated.
•This function is also used for
cooking that can be scheduled
in advance.
•If a cooking programme is set,
it will be lost if the "F" key is
pressed.
•If delayed cooking is set, the
oven switches off and the
display shows the current time
while the cooking programme,
cooking duration and end of
cooking icons are illuminated.
•If a cooking programme is set,
by pressing the “<” and “>”
keys you can see and modify
the temperature set: at the first
t o u c h , t h e o p e r a t i n g
temperature is shown while
another touch will allow you to
modify said temperature.
To modify the end of
cooking before the set
time, press EXTRA enough
times to illuminate the
icon, regulate the end of
cooking time as required
using the “<” and “>” keys
and confirm by pressing
"SELECT".
To cancel the end of
cooking time, reset the
display to “00:00”.
W h e n a c o o k i n g
programme terminates,
the oven switches off while
the display shows "END"
(the cooking programme
icon remains on) until the
On/Off button, the only
functioning key, is pressed.
W h e n a c o o k i n g
programme terminates, an
alarm will sound.
•This function is useful
when there are children in
the house.
Press the EXTRA key
enough times to illuminate
the icon and then either
the “< or >” key to
activate this function: the
display will show ON; to
confirm press SELECT.
Press the EXTRA key
enough times to illuminate
the icon and then either
the <” or “>” key to
deactivate this function:
the display will show OFF;
to confirm press SELECT.
•If the function is active
only the "Extra" button, to
deactivate the function,
and "On/Off" button can
be used.
T h e a l a r m fu n c t i o n s
regardless of whether the
oven is switched on.
•Switched on for the first
t i m e , t h e d i s p l a y
illuminates and shows
"12:00".
•To modify the time, press
EXTRA enough times to
illuminate the icon and use
the “<” and “>” keys to set
the time, confirming it by
pressing SELECT.
•It allows you to set the
time that appears on the
display.
T h e di s p l ay sh o ws
“00:00” if no time has been
inserted or the time
remaining if this has
already been set.
Press EXTRA enough times
to illuminate the icon and
use the “<” and “>” keys to
set the time, confirming by
pressing SELECT.
•To modify the timer, press
EXTRA enough times to
illumina t e th e i c o n ,
regulate the cooking time
as required using the “<”
and “>” keys and confirm
by pressing "SELECT".
•This function activates an
alarm that sounds for a few
seconds when the set time
expires (this function does
not switch the oven off).
You can select a time
between 00:00 and 23:59.
The tim er f unc ti ons
regardless of whether the
oven is switched on.
•To modify cooking before
the set time, press EXTRA
twice and regulate the
cooking time as required
using the “<” and “>” keys,
before pressing "SELECT"
once more.
•To cancel the cooking
duration, reset the display
to “00:00”.
CHILD
SAFETY
EN 09
Pressing "Extra" on the timer display allows you to select the Wi-
Fi menu. In the Wi-Fi menu if you press the "< >" buttons you can select:
- Off: Wi-Fi is off; the oven is not controllable via the app.
- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking
functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You
can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can
only be switched on via the app.
- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to
reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5
minutes to complete the enrolment process. During this process the cooking functions, recipes and
temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".
You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it
can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and
then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset
procedure automatically.
- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled
before this is possible.
If Wi-Fi is not configured it is only possible to choose between off and reset.
When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by
the user.
Wi-Fi Enrolment:
To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by
pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5
minutes to complete the enrolment process.
Wi-Fi icon
- icon not lit: Wi-Fi is off.
- Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled.
If the enrolment has not been successful, the Wi-Fi icon will switch off after 5 minutes.
- Icon is permanently lit: the oven is connected to your Wi-Fi router.
- The icon blinks 3 seconds on and 1 second off: the oven is trying to connect to your Wi-Fi router.
- The icon blinks 1 second on and 3 seconds off: the oven is in read only mode.
WiFi (depends on the oven model)
HOOVER :
For detailed information on HOW TO CONNECT your OneFi appliance and HOW
TO USE IT effectively, go to http://wizardservice.candy-hoover.com/
Grill
Oven box
Turnspit
Circular
heating element
Bottom heating element
Fan
Defost
Pyro
LANGUAGE SETTING The language can be set when
the oven is switched off by pressing the Extra and Select
buttons simultaneously and for 3". The current language is
shown on the display and can be changed by pressing the
“<” or “>” keys, confirming it by pressing SELECT. Available
languages are: Italian, English, French and German.
SELECT Any selection must be confirmed. If not
confirmed within 15 seconds, the selection is cancelled.
By changing menu, any unconfirmed selection is lost.
“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still
hot, the display shows the current time alternating with the message “HOT” at 3" intervals.
EN 10
PRE-SETTED RECIPES When a recipe is selected the display shows “R” followed by the number of
the recipe and shows the correspondent way of cooking.
The available recipes are the following:
MEAT PROBE
RECOMMENDED TEMPERATURES
Meat
Rare
Medium rare
Medium
Well done
Salmon
Chicken
56
58
60
62
35
min 68
RECIPE
COOKING
METHOD
TEMPERATURE
COOKING
DURATION
R1- Lasagne
R2- Roast/Oven cooked chicken
R3- Crusted bream
R4- Baked potatoes
R5- Omelette
Static + fan
Static
150°
180°
16
45’
40
25’
Static + fan
Static + fan
Static + fan
180°
180°
40
45’
R6- Apple pie
Static + fan
180°
45’
NB: It is not possible to change neither the temperature nor the cooking duration.
MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows
"PROBE". When a cooking programme is selected, the display shows the default temperature but is
never higher than 200°C: the selectable temperature is also limited to 200°C.
When the temperature is confirmed, by pressing "Select", the display shows “Ϙ 40°”: it is now possible
to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat
probe temperature is confirmed, press the "Select" key and the display shows “Ϙ” followed by the
actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches
the set temperature, the cooking programme terminates. If a cooking programme is set with the meat
probe, by pressing the “-” and “+” keys you can see and modify the temperature of the meat probe: at
the first touch of one of the two keys, the display shows the meat probe target temperature, while at the
next touch you can change the selected temperature of the probe.
If the user changes the cooking programme, the meat probe temperature setting is reset. Repeat the
setting sequence to select a new target temperature. The meat probe cannot be used with pre-set
cooking or with the separating plate (if present) inside the oven: in this case the display shows“Ϙ NO”
and will not execute any command until the meat probe is removed. Defrost, grill, any program with
turnspit, pyrolysis and any programmed cooking are not allowed with the meat probe (they are not
shown on the menu).
EN 11
T °C
default
180
210
200
210
40
L3
T °C
range
40 ÷ 40
50 ÷ 240
50 ÷ 230
150 ÷ 220
50 ÷ 240
L1 ÷ L5
Function
Dial
Function (Depends on the oven model)
LAMP: Turns on the oven light.
GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature. Five
minutes preheating is required to get the elements red-hot. Success is guaranteed
for grills, kebabs and gratin dishes. White meats should be put at a distance from the
grill; the cooking time is longer, but the meat will be tastier. You can put red meats
and fish fillets on the shelf with the drip tray underneath. The oven has two grill
positions:
Grill: 2140 W Barbecue: 3340 W
FAN ASSISTED GRILL : use the turbo-grill with the door closed.
The top heating element is used with the fan circulating the air inside the oven.
Preheating is necessary for red meats but not for white meats. Ideal for cooking
thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be
grilled directly on the shelf centrally, at the middle level. Slide the drip tray under the
shelf to collect the juices. Make sure that the food is not too close to the grill. Turn
the food over halfway through cooking.
FAN COOKING: We recommend you use this method for poultry, pastries, fish
and vegetables. Heat penetrates into the food better and both the cooking and
preheating times are reduced. You can cook different foods at the same time
with or without the same preparation in one or more positions. This cooking
method gives even heat distribution and the smells are not mixed.
Allow about ten minutes extra when cooking foods at the same time.
DEFROST: When the dial is set to this position. The fan circulates air at room
temperature around the frozen food so that it defrosts in a few minutes
without the protein content of the food being changed or altered.
*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.
3.2 Cooking Modes
FAN + LOWER ELEMENT: The bottom heating element is used with the fan
circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts,
quiches and pâté.
It prevents food from drying and encourages rising in cakes, bread dough and
other bottom-cooked food.
Place the shelf in the bottom position.
EN 12
220 50 ÷ 280
CONVENTIONAL COOKING: Both top and bottom heating elements are used.
Preheat the oven for about ten minutes. This method is ideal for all traditional
roasting and baking. For seizing red meats, roast beef, leg of lamb, game, bread,
foil wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf
in mid position.
*
BOTTOM: Using the lower element. Ideal for cooking all pastry based dishes.
Use this for flans, quiches, tarts, pate and any cooking that needs more heat
from below.
210 50 ÷ 230
ECO ECO÷SUPER
PYROLYSIS
ROTISSERIE: use the turnspit with the door closed.
The top heating element is used with the turnspit rotating the food to be cooked.
The heating temperature can be adjusted as required. The turnspit is best used for
medium-sized items.
Ideal for rediscovering the taste of traditional roast. No preheating is required for
turnspit cooking.
L5
L1 ÷ L5
GRILL+FAN+TURNSPIT: It is indicated for cooking the meat, particularly
voluminous, on the spit and it allows you to cook the food faster.
220
150 ÷ 220
EN 13
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in
hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.
4.2 Pyrolysis
The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high
temperature. The operation is carried out automatically by means of the programmer. The resulting
fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very
high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser
can be stopped at any time. The door cannot be opened until the safety lock is displayed.
NOTE : If a hob has been fitted above the oven, never use the gas burners or the electric hot-plates while
the Pyrolyser is working, this will prevent the hob from overheating.
TWO PYROLYTIC CYCLE are pre-set:
ECO PYROCLEAN : Cleans a moderately stained oven. Operates for a period of 90 minutes.
SUPER PYROCLEAN : Cleans a heavily stained oven. Operates for a period of 120 minutes.
Never use commercially available cleaning products on a Pyrolytic oven!
Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual
heat, thus saving energy.
Before executing a pyrolytic cycle:
•Remove all the accessories from the oven because they are not able to tolerate the high
temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and
the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat
probe it is necessary, before making the cleaning cycle , close the hole with the nut provided.
•Remove any large spillages or stains as it would take too long to destroy them. Also excessively
large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic
cycle.
•Close the oven door.
•Excess spillage must be removed before cleaning.
Clean the oven door;
Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use
detergents;
Remove all accessories and the sliding rack kit (where present);
Do not place tea towels.
REMOVAL AND CLEANING OF THE SIDE RACKS
1. Unscrew the bolt in an anti-clockwise direction.
2. Remove the side racks by pulling them towards you.
3. Clean the side racks in a dishwasher or with a wet sponge and then dry them immediately.
4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully
tightened.
4.3 Maintenance
A
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
3. Replace the window by carrying out the procedure in reverse.
Using the pyrolitic cycle:
1- Rotate the function selector to the position " ". On the display, appears the indication " ECO " or
" SUP ". The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via
the programmer (setting button " + " or " - "). If the oven is very dirty, it is recommend o increase the time
to 120 min, if the oven is moderately dirty reduce the cleaning cycle time to 90 min.
2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the
programmer.
3- After few minutes, when the oven reaches a high temperature, the door locks automatically. The
pyroclean cycle can be stopped at any time by turning the function selector back to '0' (the word OFF will
be displayed for 3 seconds).
4- Once the pyroclean cycle is finished, the pyrolysis will switch off automatically. On the display appears
the indication "END" until the door is locked then "0--n".
5- You can turn the function selector back to " 0 " but if the temperaure is still high, the "0--n " indication
appears to inform that the door is locked.
Use of the pyrolytic cycle in Touch Control ovens:
1- Rotate the function selector into position pyrolisys. The display will show either "ECO" or "SUP“
2- The pre-set time is90 minutes but it can be varied from 90 min. (Eco mode) to 120 min. (Sup mode)
using the programmer (" +" or "-" key). If the oven is very dirty, the time should be increased to 120 min.,
while if the oven is only a slightly dirty, reduce the cleaning cycle to 90 min.
EN 14
LOW-E
1
2
3
1.
2.
3.
4.
5.
6.
7.
REMOVAL AND CLEANING OF THE GLASS DOOR
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.
EN 15
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
EN 16
Pendant la cuisson de l’humidité peut se créer dans la cavité ou sur la
surface de la porte. Le cas crit est normal. Si on veut reduire cet effet, il
faut laisser réchauffer le four 10-15 minutes avant d’introduire les
aliments. L’humidité va dispartre grâce à la juste température de cuisson
Nous vous conseillons de faire la cuisson des gumes dans un récipient
avec couvercle pas sur un plateau
Une fois que la cuisson est terminée, nous vous conseillons de ne pas
laisser les aliments à l’intérior de la cavité pour plus de 15/20 minutes
AVERTISSEMENT: L'appareil et les parties accessibles deviennent chauds
pendant l'utilisation. Des précautions doivent être prises pour éviter de
toucher les éléments chauffants.
ATTENTION : les parties accessibles peuvent devenir très chaudes quand
le four est en marche. Les enfants doivent être tenus à une distance de
sécurité.
Cet appareil n'est pas destià être utilipar des personnes (y compris
les enfants) dont les capacités physiques, sensorielles ou mentales sont
réduites, ou ayant un manque d'expérience et de connaissances, à moins
qu'elles n'aient été fores à l'utilisation de l'appareil, par une personne
responsable de leur curité.
Les enfants ne doivent jouer avec l'appareil.
• Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des
enfants sans surveillance.
• En cours d'utilisation l'appareil devient chaud. Des précautions doivent
être prises pour éviter de toucher les éléments chauds à l'intérieur du four.
AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes
pendant l'utilisation. Les jeunes enfants doivent être tenus à lcart.
Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques tranchants
pour nettoyer la vitre de la porte du four car ils peuvent rayer la surface,
entrainant des risques d'explosion.
Le four doit être éteint avant d'enlever la protection et après le nettoyage,
la protection doit être replacé en respectant les instructions.
Utiliser seulement la sonde de température recommane pour ce four.
Ne pas utiliser de nettoyants vapeur pour le nettoyage.
Brancher le câble d’alimentation sur une prise de courant qui supporte
le voltage ; le courant et la charge sont indiqués sur l’étiquette ; vérifier la
présence dune mise à la terre. La prise d’alimentation doit supporter la
charge indiquée sur l’étiquette et être doe d’une mise à la terre en état
FR 17
Conseils De Securite
de fonctionnement. Le conducteur de mise à la terre est jaune et vert.
Cette opération doit être exécutée par du personnel qualifié. En cas
d’incompatibilientre la prise d’alimentation et la fiche du câble de
l’appareil, demander à un électricien professionnel de remplacer la prise
d’alimentation par un dispositif compatible. La fiche du câble
d’alimentation et la prise d’alimentation doivent être conformes aux
normes en vigueur dans le pays d’installation. Il est possible de brancher
l’appareil à la prise d’alimentation en installant un disjoncteur
multipolaire qui supporte la charge électrique maximale, conformément
aux lois en vigueur, entre l’appareil et la prise d’alimentation. Le
conducteur jaune et vert de mise à la terre ne doit pas être bloqué par le
disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire utilisé
pour le branchement doit rester à tout moment accessible lors de
l’installation de l’appareil.
• Le débranchement doit se faire en accédant à la prise d’alimentation
ou en prévoyant un interrupteur sur le circuit électrique fixe, conforme
aux normes électriques.
Si le câble d’alimentation est endommagé, il doit être remplacé par un
câble ou un faisceau de câbles spécial disponible auprès du fabriquant
ou en contactant le service après-vente.
Le câble d’alimentation requis est le H05V2V2-F.
Le non-respect des consignes ci-dessus peut compromettre la sécuri
de l’appareil et annuler la garantie.
Tout produit déversé en quantité doit être éliminé avant le nettoyage.
Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir beaucoup
plus chaude que d’habitude, les enfants doivent donc être tenus à une
distance de curité.
Ne pas installer l’appareil derrière une porte décorative, pour éviter la
surchauffe.
En introduisant le plateau dans le four, s’assurer que le stop est dirigé
vers le haut et au fond de la cavité.
Le plateau doit complètement être inséré dans la cavité
AVERTISSEMENT : Ne tapissez pas les parois du four avec du papier
aluminium ou un autre matériau de protection jetable en vente dans le
commerce. Tout papier aluminium ou autre matériau de protection qui
entrerait au contact direct de l'émail chaud risquerait de fondre et de
détériorer l'émail intérieur du four.
AVERTISSEMENT : Ne retirez jamais le joint de la porte du four.
Aucun réglage/opération supplémentaire n’est requis pour faire
fonctionner l’appareil aux fréquences nominales
FR 18
Instructions Générales
20
1.1 Indications de sécurité
1.2 Sécurité électrique
1.3 Recommandations
1.4 Installation
1.5 La gestion des déchets et la
protection de l'environnement
1.6 Déclaration de conformité
2.1 Vue d'ensemble
2.2 Accessoires
2.3 Première utilisation
Description du produit
22
3.1 Description de l'affichage
3.2 Mode de cuisson
Utilisation du Four
24
4.1 Remarques générales concernant
le nettoyage
4.2 Pyrolyse
4.3 Entretien
• Retrait et nettoyage des grilles
• Retrait de la porte du four
• Retrait et nettoyage des vitres
• Remplacement de l'ampoule
Nettoyage du four et
maintenance
29
5.1 F.A.Q.
Dépannage
32
SOMMAIRE
FR 19
1. Instructions générales
Nous vous remercions d'avoir choisi un de nos produits.
Pour obtenir les meilleurs résultats avec votre four, vous
devez lire attentivement ce manuel et le conserver pour
toute consultation ultérieure. Avant d'installer le four,
notez le numéro de série, il vous sera demandé par le
support technique si des réparations sont nécessaires.
Après avoir enlevé le four de son emballage, vérifiez
qu'il n'a pas été endommagé pendant le transport. Si
vous avez des doutes, ne pas utiliser le four et se référer
à un technicien qualifié pour obtenir des conseils.
Conservez tous les matériaux d'emballage (sacs en
plastique, polystyrène, clous) hors de la portée des
enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre
provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce
phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline
toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas
respectées.
REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier
selon les modèles.
1.1 Indications de sécurité
Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute autre
utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc
dangereuse. Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaise utilisation
ou a des modifications techniques du produit.
L'utilisation de tout appareil électrique implique le respect de certaines règles fondamentales:
- Ne pas tirer sur le fil électrique pour débrancher la prise.
- Ne pas toucher l'appareil avec les mains ou les pieds mouillés ou humides;
- En général l'utilisation d'adaptateurs, de prises multiples et de rallonges est déconseillé;
- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y
toucher.
1.2 Sécurité électrique
LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN
TECHNICIEN DE QUALIFICATION SIMILAIRE.
L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le
pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non
respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale
reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur
dans le pays d'installation. L'alimentation électrique doit être protégée par des fusibles appropriés et les
câbles utilisés doivent avoir une section transversale qui peut assurer une alimentation normale du four.
CONNEXION
Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique
de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir
vérifié:
- La tension d'alimentation indiquée sur le compteur;
- Le réglage du disjoncteur.
Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne
Terre de l’installation.
FR 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179

Hoover HOZP7876B Kullanım kılavuzu

Tip
Kullanım kılavuzu